What's working:
* Boots
* Wi-Fi
* Bluetooth
* NFC
* GPS
*Camera
* Sensors
* RIL
* Video Playback
* Deep Sleep
* Internal Storage
* Micro SD
* Audio
* Thermal Management
* Brightness (auto and manual)
* Enforcing SELinux + user build
What's not working:
What I don't know:[/B]
* Anything else I haven't mentioned
:fingers-crossed::fingers-crossed::fingers-crossed:
I just tried to build AICP,Welcome to flash the ROM
Attend: If you cannot use the built-in file manager to install the software, open the file manager, click the menu button in the upper right corner, and click to display the internal storage device. Then you can install the software normally.
I haven't done in depth testing to find all the bugs, so any input on the matter is much appreciated (with logs).
I have noticed that Oreo is much smoother and more responsive when compared to Nougat.
MAKE SURE YOU ARE ON TWRP 3.2.1, NOT OFFICIAL TWRP, OTHERWISE THE FLASH WILL FAIL.
TWRP-3.2.1
Hopefully, one of these days I will compile clean TWRP-3.2.1 from source, but for now, this should work.
GApps (Please select ARM 8.1)
Magisk
C6902 Baseband(TEST)
Xperia Camera
Build:
05-15
INSTALLATION
1.Unlock Bootloader, throw ROM at the Internal Storage or SD card
2. Install TWRP Recovery 3.2.1
3. Boot to Recovery
4. Wipe Cache,Wipe Data,Wipe System and Wipe ART/Dalvik cache
5. Install the ROM
6. Install C6902 Baseband (C6903 SKIP)
7. Install Gapps
8. Install SuperSU or Magisk
9. Done!
How to used GSM or 3G?
Enter *#*#4363#*#* in the dial
Select the first option
Choose only WCDMA
Open the flight mode
Turn off the flight mode again
Source:
wait
Contributors:
*rcstar6696
*SuperLamic
*AdrianDC
*drakonizer
*AICP
*All the other contributors to sony msm8974 platform
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Based On: AOSP + CAF
Version Information
Status: Beta
Created 2018-05-15
Last Updated 2018-05-15
国人可以去国内的论坛
http://bbs.gfan.net.cn/android-9305460-1-1.html
Wow i will test @Remim7 , you continue update the build lineage 15.1 for honami or will continue from this build AICP ? Thanks maintenance for honami!
Matheus75 said:
Wow i will test @Remim7 , you continue update the build lineage 15.1 for honami or will continue from this build AICP ? Thanks maintenance for honami!
Click to expand...
Click to collapse
I just tried to build AICP，because I saw a lot of problems before the AICP, and had to flash the patch, I feel trouble, so I build an AICP, later did not update to see if there is time.
Music player doesn't work
Thank you for building this rom, a rom built from source code is better than a rom ported from other device. I try AICP ported from z1 compact, it works quite well but it has something that make me annoy like battery capacity show 2300mAh, the onscreen time is much less than other roms (2h30 for AICP and 4h for Carbon rom,...) if I play heavy games.
I hope you can make a pure AICP for our device, which has least bugs as possible
legendstarspro said:
Thank you for building this rom, a rom built from source code is better than a rom ported from other device. I try AICP ported from z1 compact, it works quite well but it has something that make me annoy like battery capacity show 2300mAh, the onscreen time is much less than other roms (2h30 for AICP and 4h for Carbon rom,...) if I play heavy games.
I hope you can make a pure AICP for our device, which has least bugs as possible
Click to expand...
Click to collapse
Hahahaha，you can try build from source code
mehdixan_b said:
Music player doesn't work
Click to expand...
Click to collapse
You can try use other music player,such as Google player or Spotify，apple music.
Hi. Thanks to your good rom, the percentage of charging is not displayed when it's off (like Android 7). There is no weather in the clock widget (like Android 7
reza-salehi said:
Hi. Thanks to your good rom, the percentage of charging is not displayed when it's off (like Android 7). There is no weather in the clock widget (like Android 7
Click to expand...
Click to collapse
???,I don't know you think to say what?
Can you make it shows battery percentage while offline charging (charge when device is turned off)? It only show AICP logo charging animation
My Camera can't focus, are you guys have same problem?
And I can't play music file from SD card.
Hope u will fix it Remim7,..thanks
Remim7 said:
Hahahaha，you can try build from source code
Click to expand...
Click to collapse
installed 2 days ago, it works all but the battery does type 2 and a half hours of active screen. the good thing is that the device does not overheat.
I installed the ROM is very good I did not find bugs battery draining fast , camera stock normal , FM radio , no heating up in general everything ok. so battery draining fast with low CPU settings. for those who have the problem of not playing songs by SD card, I found how to solve, enter the AICP settings and change the SELinux option Restrict to Permissive and restore sepolicy on boot. works great for me thanks @Remim7
GPS not working!!!
(it finds sats but doesn't use them)
screenshot::
Edit:
It acts weird it automatically determines location but doesn't feedback completely to software
Can you update the rom to the latest source code of aicp? It is not important but it should make us more convenient to use a up-to-date rom.
@Remim7 installed the AICP ROM of May 15, installed everything as per instructions, every now and then on my C6903 goes to block, you can remedy a correction, and add what was in the previous ROM or Nougat,5 seconds to start an App, and overheats a lot, I await feedback
@Remim7 any news for this build?
Renim7, I hope you can update this rom to the lastest source of AICP.
Related
Temasek Unofficial CM12
Disclaimer
Code:
[SIZE="1"]/*
* Your warranty is not void - from Xiaomi.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/[/SIZE]
Features
Code:
[SIZE="1"]Disable scrolling cache
Heads Up Notifications
Configurable lockscreen shortcuts
Clock alignment
Network traffic meter
Status bar weather
Launch Superuser from Settings
Launch SuperSU from Settings
Navigation bar height
Enable/disable VOLUME rocker wake
Setting: add app move to external storage
Settings: allow home button to wake device
Settings:DPI Settings/Display density[/SIZE]
How To Flash
[*]Boot into recovery
[*]Factory reset, wipe everything except sdcard
[*]Install rom/gapps on system 1
[*]Boot into system 1
[*]
Issues
[*]mm-qcamera-daemon bug - camera randomly disconnected
[*]video cam not working
[*]random reboot
[*]slow charging time for some
[*]compas
[*]
Download Moved To 2nd Post
Change Log
Mostly here what's important
https://github.com/temasek/android_frameworks_base/commits/cm-12.0
https://github.com/temasek/android_packages_apps_Settings/commits/cm-12.0
cm/temasek upstream changes to date
http://forum.xda-developers.com/showpost.php?p=59048306&postcount=339
http://forum.xda-developers.com/showpost.php?p=58876450&postcount=262
http://forum.xda-developers.com/showpost.php?p=58580618&postcount=132
Additionally can look About Phone - Changelog
Credit
@temasek, @CyanogenMod, CancroCM Dev, Community
XDA:DevDB Information
Temasek Unofficial CM12, ROM for the Xiaomi Mi 3
Contributors
audahadi, temasek
Source Code: https://github.com/temasek
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-01-25
Last Updated 2015-01-25
Device Tree : https://github.com/audahadi/android_device_xiaomi_cancro
Vendor Tree : https://github.com/audahadi/proprietary_vendor_xiaomi
Kernel Source :https://github.com/kernel-hut/android_kernel_xiaomi_cancro/tree/cm-12.1
Download
Latest :cm-12.1-20150624-UNOFFICIAL-temasek-cancro
Older : Mi3W Temasek Unofficial Build
Download (Stock Partition)
Xiaomi MI 3W_Temasek Unofficial CM12_Stock Partition
Recommended Gapps
Banks Minimal Gapps
Usefull Link
How to Be a Good Custom ROM or Kernel User
Re-partition system
Tired of low system partition? Try this and say goodbye to dualboot.
http://forum.xda-developers.com/showpost.php?p=58591075&postcount=29
This is one of the best CM12 ROMs and my favorite too. Thank you @audahadi Sir for this excellent work.
Thanks man
but this build doesn't works with clean flash right one has to flash 18 build to get it working ??
or can we go for the clean flash ??
This rom is great Love it
Hat's off to all the devs who put their time and effort in building this great ROM that to w/o any kernel source.
Occasional reboots and the slow charging (for some people including me ) are the two major issues. The former one is of generic kind but the latter I think can be fixed on upcoming builds.
Below findings are from 19-01 Temsek build.
Slow charging issue can temporarily be fixed by first connecting the charger and then rebooting. After the reboot, it will charge normally (1000mA-1.100mA input current), but if charger is disconnected for some reason. Then on re-connecting the charger, it will charge like USB(250mA - 350mA).
Hi OP
Can u post the title thread with your device model?
Thanks
WOW!
Thanks all open source community to helping forgotten customers of this great ROM but released from wrong company.
Thanks and hats off to all
I hope things will get better if (ever) Xiaomi release kernel code.
I want try this but can anyone make "review". Is still mm-qcamera persist?
I tried 0117 build and it was so bad (sorry). I couldn't use my phone. I really want try smooth Lollipop build and use it on daily basis...
P.s. you maybe want sign petition :good:
Regards and once again - thank you guys!
Thank you, according to your tutorial does not know what is the problem stuck in the boot animation, but in the previous rom direct coverage can be done startup the update now has Use the up very smooth, thank you again.
clean flashed cm-12-20150123-UNOFFICIAL-temasek-cancro and I am stuck at bootanimation for something like 30 minutes... how can I fix?
thanks in advance!
EDIT: problem fixed. I manually replaced boot.img from the 23/Jan build zip with the one contained in blisspop, then reflashed. now it booted up properly
will test the rom thanks for that.
moly82 said:
clean flashed cm-12-20150123-UNOFFICIAL-temasek-cancro and I am stuck at bootanimation for something like 30 minutes... how can I fix?
thanks in advance!
Click to expand...
Click to collapse
Well I think you miss the party here ?
Flash audahadi's cm12 20150118 build first, let it boot (if you can't wait just wait till the screen dim since long boot time may happen) and boot to recovery ( by either normal reboot from power menu or force-reboot by holding volume up and power) and dirty flash temasek latest build.
Edit: late reply ?. Maybe will be useful for those who just download-and-flash like me ?
SkipperRyujin said:
Well I think you miss the party here ��
Flash audahadi's cm12 20150118 build first, let it boot (if you can't wait just wait till the screen dim since long boot time may happen) and boot to recovery ( by either normal reboot from power menu or force-reboot by holding volume up and power) and dirty flash temasek latest build.
Edit: late reply ��. Maybe will be useful for those who just download-and-flash like me ��
Click to expand...
Click to collapse
found the solution, please see my edit in my previous post much easier than download another rom, and flash over it. thanks anyway!
moly82 said:
found the solution, please see my edit in my previous post much easier than download another rom, and flash over it. thanks anyway!
Click to expand...
Click to collapse
Yes I see, that why I also edited my post ?
Actually you can also dirty flash from blisspop
@OP, sorry for spamming
Maybe some useful reviews?
mm-qcamera still here? Can someone report random reboot?
sudy_freak said:
Maybe some useful reviews?
mm-qcamera still here? Can someone report random reboot?
Click to expand...
Click to collapse
will report after testing.. reboots are there for sure btw, as all the other 5.0 roms.... ;( in OP already you can see known bugs btw
EDIT: I don't seem to find the option for switching tracks with volume buttons with screen locked (one of th emost important features for me), is it not included in temasek maybe? thanks! (a part from this, I like this rom, it has many features, much better than CM!! :good: )
Wow a great rom for MI3W. No random reboots yet and no camera daemon bug. deep sleep is working flawless. Totally superb.
sarath medithi said:
Wow a great rom for MI3W. No random reboots yet and no camera daemon bug. deep sleep is working flawless. Totally superb.
Click to expand...
Click to collapse
That's great. Please update your "review" if you find something new
could you please create the updated zip file and and please upload it to gdrive. it will be very beneficial for everyone so that we don't have to download two different CM roms and then manually replace the file. which never worked for me.
cosmicsatish said:
could you please create the updated zip file and and please upload it to gdrive. it will be very beneficial for everyone so that we don't have to download two different CM roms and then manually replace the file. which never worked for me.
Click to expand...
Click to collapse
no need to download two roms, as said above, just download the latest temasek build (from 23/Jan) and the boot.img contained in the blisspop rom (there is a direct link for it in the other lollipop threads). then put this file in the temasek zip, overwriting the one you have inside, and flash. boot will be very fast
look here for even more info on how i did that, if you need!
edit: here is link for blisspop's boot.img thanks to a guy in another thread
https://www.dropbox.com/s/zntpik17251pcob/boot.img?dl=0
This is not my Rom - this is just a Forum for discussion on XDA - the main forum is the 4pda.ru site
LineageOS 15.1 eXtended
4pda.ru - Original Rom Thread - https://4pda.ru/forum/index.php?showtopic=809215&view=findpost&p=72074026
Rom download
Source Forge - 1/4/2019 - last build
https://sourceforge.net/projects/lineageos-extended/
Latest Personal Build from Alexey71
https://drive.google.com/drive/mobile/folders/1EQCRrAVSPkzGQk1pVjDe67KaY12caGJ4
Change Log -
Find the current change log in the folder where you download the rom
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS eXtended is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS eXtended is based on LineageOS and the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS eXtended does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS eXtended is available in the LineageOS eXtended Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Source Code:
https://github.com/LineageOS-eXtended
https://github.com/Alexey71
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
IR Blaster
Wi-Fi
Bluetooth
Camera
Camcorder (Supports up to 60fps via GCAM in bright light)
Video Playback
Audio
Sensors
Flash
LED
GPS
Volte
ViLte
Known issues:
You Tell me
FAQ: (Google Translation of Russian Forum FAQ)
Answers to questions or FAQ:
* The first time the firmware is installed, crashes the setting.
Delete the SetupWizard in GAPPS
* There is no "for program" option on LOS in the superuser settings, there is only "ADB". How do I enable root for programs?
Route of access is not present, it is necessary to flash Magisk treble or LineageOS extension https://download.lineageos.org/extras
Instructions :
Download the latest Rom build - Source Forge - https://sourceforge.net/projects/lineageos-extended/ - and GApps - https://opengapps.org/
Reboot to recovery
Flash the latest build and GApps
Reboot
Downloads :
Recovery & Magisk
Twrp 3.2.3.1 - treble version -
https://dl.twrp.me/mido/twrp-3.2.3-1-mido.img.html
Orange Fox r9.0 (twrp 3.2.3.1) -
https://forum.xda-developers.com/re.../recovery-orangefox-recovery-project-t3775933
Official https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 Magisk 19.0
Extra Camera's
MIUI Camera (For Slow Motion Video Capture)
Google Camera Builds
5.1 - made for. Redmi note 4x
https://androidfilehost.com/?fid=1322778262904015883 by k3lt
5.2 —Gcam by bulkin043
https://www.dropbox.com/s/w4x3ozscox5lidq/GoogleCamera.apk?dl=0
6.2 - Gcam by Bulkin043 (has night sight, time-lapse)
https://mega.nz/#!vPQFxYia!wh8AmGhr...n2VQJnw7VKVovduklp_ZkRH1ktJ/view?usp=drivesdk
Check out - https://www.celsoazevedo.com/files/android/google-camera/ for more Gcam builds
Credits :
Alexey711 - Rom Compiler / Developer
Alexey711 - Profile on 4pda.ru
Xda Id: Alexey71
Contributors
alexey71
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Miui 9 8.5.x or later
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: Development Stopped
Stable Release Date: 2019-04-26
Created 2018-05-22
Last Updated 2019-04-27
We need a space to admiring this perfect ROM, thanks OP for opening the discussion thread ^_^
Magisk Module - to change some defaults - values listed below. Just allows me to turn off Noise Cancellation for Video recording, use fluencepro instead of regular fluence Noise Cancellation and enable EIS by default.
Verified that the getprop command from a ADB shell returns the new values. Looks like the Module is working
Build.prop additions
Code:
Code:
# Add EIS and disable noise cancelation
persist.camera.eis.enable=1
#use fluencepro instead of fluence
ro.vendor.audio.sdk.fluencetype=fluencepro
#turn off noise cancellation for audio recordings
persist.vendor.audio.fluence.voicerec=false
Google Translate of Russian Change Log - (old) https://pastebin.com/raw/zEH3kdjK
Current Log -
https://drive.google.com/drive/mobile/folders/1ylzMJ3VVcFTsbx7iY8NU6l1z2zQ22bpu
Great great rom. Although had a problem with the high temp/signal los bug. Flashed the module from other thread and hope its fixed now. Keep u posted.
Jaco90 said:
Great great rom. Although had a problem with the high temp/signal los bug. Flashed the module from other thread and hope its fixed now. Keep u posted.
Click to expand...
Click to collapse
Which module / recovery zip file has this patch? I haven't seen the bug yet, but i haven't tried heavy gaming on the device, mainly just casual short games
p3dboard said:
Which module / recovery zip file has this patch? I haven't seen the bug yet, but i haven't tried heavy gaming on the device, mainly just casual short games
Click to expand...
Click to collapse
Its in this thread: https://forum.xda-developers.com/showthread.php?p=76334866#post76334866
Backups - Btw, if anyone wants to get SMS Backup, Call History Backup etc, going on Oreo, and you have Root Access (Magisk Root as an example), then you can get it going by opening up a Terminal Window (get Terminal App from Google play).
Then from the terminal run
Code:
su
bmgr run
bmgr backupnow --all
Once its completed, do a reboot, and you'll notice that in your Backup Status, your SMS's, Call Logs, Device Settings etc are now backed up. They should now backup once every 2 Days to your Google Drive, for use if you need to restore your device.
Last time I tried an Oreo Rom, it wasn't backing up, and at that time, I didn't know how to fix it. So I went back to MIUI for a while, so I had the auto backup (yeah I could have used an application for SMS backup, but I wanted the OS to do it )
Jaco90 said:
Its in this thread: https://forum.xda-developers.com/showthread.php?p=76334866#post76334866
Click to expand...
Click to collapse
I just checked out the zip, the file sizes look identical to the ones already in Alexey711's rom. If you look at the change log, he already mentions adding thermal fixes
p3dboard said:
I just checked out the zip, the file sizes look identical to the ones already in Alexey711's rom. If you look at the change log, he already mentions adding thermal fixes
Click to expand...
Click to collapse
Yup, I noticed. Had the same heating bug again today. When driving in the car, the phone gets heated and i loose all signal.
i tried this ROM but cannot find the option to disable quick-setting in secure lockscreen and faceunlock option is absent in smart lock despite using nano gapps.
Skynet:) said:
i tried this ROM but cannot find the option to disable quick-setting in secure lockscreen and faceunlock option is absent in smart lock despite using nano gapps.
Click to expand...
Click to collapse
According to this post, someone fixed the face unlock issue by flashing gapps a second time.
https://www.google.com.au/amp/s/amp.reddit.com/r/LineageOS/comments/5q1awf/no_face_unlock/
I also don't have the option, i will give it a test and let you know.
As for the quick settings, don't know. Is that normally available in LineageOS 15.1? As this is just LineageOS with some extras.
Edit:
Reflashing Gapps enabled face unlock in secure unlock, so for some reason it's not registered properly the first time. So that fix works for me. I am using Micro Gapps package
p3dboard said:
According to this post, someone fixed the face unlock issue by flashing gapps a second time.
https://www.google.com.au/amp/s/amp.reddit.com/r/LineageOS/comments/5q1awf/no_face_unlock/
I also don't have the option, i will give it a test and let you know.
As for the quick settings, don't know. Is that normally available in LineageOS 15.1? As this is just LineageOS with some extras.
Edit:
Reflashing Gapps enabled face unlock in secure unlock, so for some reason it's not registered properly the first time. So that fix works for me. I am using Micro Gapps package
Click to expand...
Click to collapse
Yes reflashing brought back the face unlock but the other option seems to be not there .
p3dboard said:
According to this post, someone fixed the face unlock issue by flashing gapps a second time.
https://www.google.com.au/amp/s/amp.reddit.com/r/LineageOS/comments/5q1awf/no_face_unlock/
I also don't have the option, i will give it a test and let you know.
As for the quick settings, don't know. Is that normally available in LineageOS 15.1? As this is just LineageOS with some extras.
Edit:
Reflashing Gapps enabled face unlock in secure unlock, so for some reason it's not registered properly the first time. So that fix works for me. I am using Micro Gapps package
Click to expand...
Click to collapse
I reflashed gapps but no face unlock working. It doesn't unlock the phone. There is some hidden option?
djgigi94 said:
I reflashed gapps but no face unlock working. It doesn't unlock the phone. There is some hidden option?
Click to expand...
Click to collapse
Yes, after you add your face, you need to go into the screen lock settings and enable the Face Auto unlock feature
hi,
in previous thread I said that autonomy was good, but ultimately it is worse than miui or others 8.1 rom...
May 2018 Security patch build is out
Do we need to flash gapps everytime even on dirty updates?
cimdrap said:
Do we need to flash gapps everytime even on dirty updates?
Click to expand...
Click to collapse
Nope,only flash if you did wipe before updates
If you want to get more Miui level battery performance, you can turn on extreme power savings under battery which restricts background processes and performance.
Miui applies a heavy restriction on background processes
Code:
/*
* Your (probably expired) warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
IMPORTANT INFORMATION
Hi all,
This ROM is in a very early development stage, so you can expect a lot of things broken.
Please don't expect to use this ROM as a daily driver.
What is working:
Audio (playback)
Bluetooth
Graphics
Camera - photo, video recording (w/out audio)
Sensors
RIL
GPS
Wifi
USB
Video playback (HW/SW)
What is not working:
Audio recording
Proximity & Orientation sensors
GPS
Camera may not start at times
System time issues (alarm might not work or start with a delay)
maybe yet something
Download:
AndroidFileHost
Installation order:
The installation below requires a repartition of the phone internal sdcard in order this ROM fit on /system partition. DO NOT proceed an installation if you are unsure what you're doing and how to deal with a possible consequencies.
before installation make sure you have a TWRP recovery
install chrono kernel (both ROM and the corresponding kernel are located in the same directory - see ROM link below)
reboot recovery
flash ReParted zip. This will wipe system, data and cache partitions!
install ROM
install chrono kernel again
*please note a possibly undesirable effect of the repartition: cache partition will be decreased to 15 MB and some ROMs that rely upon this partition won't boot. To restore original sdcard partition layout, flash stock 4.1.2 ROM (with PIT file).
Credits:
@SergeyL
@rINanDO
@AdrianDC
@3liteking148
@Meticulus
@Unjustified Dev
@golden-guy
@nieltg
@isaak
@NovaFusion
@TeamCanjica
LineageOS community
Google
Special Thanks:
@isaak, @enkflr, @Pdevo, @prometej-zg for donating this phone!
[*]@S.AMU for providing FTP-Server
Source code:
Manifest: LOS 16.0
Device tree: LOS 16.0,
Kernel: LOS 16.0
other repos
XDA:DevDB Information
LineageOS 16.0, ROM for the Samsung Galaxy S Advance I9070
Contributors
ChronoMonochrome
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP recovery 3.x
Version Information
Status: Alpha
Created 2018-12-31
Last Updated 2018-12-31
Reserved
Reserved
Wow, works better than Oreo
Srsly, little more tweaking and this is suitable for daily use
is it possible to implement these functions in the janice kernel?
github.com/pelya/android-keyboard-gadget
Gonna try it today in 5 hours maybe, use it for a day and give my feedback. thanks for keeping this phone alive. Also have u tried magisk with this rom? I will try it anyway but i just wanted to know.
Here is my feedback.
1- No space for flashing pico gapps so I guess we will have to use microG.
2- Random freezes that takes like a minute then locks the phone.
3-Sometimes, WiFi didn't work and I had to restart. When pressing the icon it flashes green then goes back to grey again.
4-Bluetooth isn't working at all ( not sure if it's only me or what because it never worked on LOS 15.1 too ).
5-GPS not working as well.
6-I hope you add HardwareKeys remap, navigation gestures and Traffic monitor, of course if you don't mind.
..
That's pretty much it. If you can fix the second and third problems, this ROM can be used as a daily driver.
Sent from my GT-I9070 using XDA Labs
Sorry for OT but, @ChronoMonochrome you considered working on PMOS for 9070?
It's nice idea and porting require talented people like you
https://wiki.postmarketos.org/wiki/Samsung_Galaxy_S_Advance_(samsung-i9070)
Bx16 said:
Sorry for OT but, @ChronoMonochrome you considered working on PMOS for 9070?
It's nice idea and porting require talented people like you
https://wiki.postmarketos.org/wiki/Samsung_Galaxy_S_Advance_(samsung-i9070)
Click to expand...
Click to collapse
Nice to see some efforts of developing custom ROMs here, but amount of non-working features scares me
I would rather stick updating some my older ROMs like UltimateROM (but no promises though).
Mainlining/forward porting work always comes handy, irrespective of whether one's interested to Android/Linux or GNU/Linux.
I cannot believe this device is still getting updates
excuse my rudeness but do u plan on updating this rom or should i lose hope ?
How do i install this room? I tried everything but always got or error 7 or infinite samsung screen without being able to go to recovery mode, so found myself going back to stock over and over again :/
DeathArcanaXIII said:
How do i install this room? I tried everything but always got or error 7 or infinite samsung screen without being able to go to recovery mode, so found myself going back to stock over and over again :/
Click to expand...
Click to collapse
You have to upgrade from 2.3 rom to a 4.2 rom first like this (if it didn't work, consider using this )in order to upgrade the bootloader then you can install this rom. But i wouldn't recommend this rom as its not stable. LOS 15.1 is far more stable for a daily driver.
Pie works great, but one (maybe silly) question...
Where to get GApps for this ROM?
.czarodziej said:
Pie works great, but one (maybe silly) question...
Where to get GApps for this ROM?
Click to expand...
Click to collapse
https://wiki.lineageos.org/gapps.html (you need GApps for ARM platform).
Does this ROM work on the Galaxy S gts7582? Would the developer of this ROM solve the 15.1 Lineageos bugs for the gts7582?
oseiasrodrigues0 said:
Does this ROM work on the Galaxy S gts7582? Would the developer of this ROM solve the 15.1 Lineageos bugs for the gts7582?
Click to expand...
Click to collapse
Provably not, they're completely different devices.
The dev need access to the device or at least a very very similar one to look at bugs properly so I guess no.
enkflr said:
Provably not, they're completely different devices.
The dev need access to the device or at least a very very similar one to look at bugs properly so I guess no.
Click to expand...
Click to collapse
Is that the gts7582 has lineageos 15 It initializes only does not work anything video, audio, etc. So I thought some dev could solve the bugs of this ROM. But thank you very much for the answer
I installed lineage os 16 on my s advance this is how it went:
1. Bluetooth kept crashing idk why but i uninstalled the bluetooth apk so it dosen't work at all
2. MicroG
It works fine i flashed it and it has signuature spoofing already on yay and it dosen't get stuck in the boot animation after restart
3. Kernel
Oh yeah overclocking is fun i overclocked the cpu to the max and it works amazing
4. Camera
Works but not video
Its ok but bluetooth sadly not working but idc
Its not my main phone anyway thankgod <3
Hey All,
So here is LineageOS 17 Port ROM for Redmi 5 Rosy
(Ported from Resk84's GSI Built with Erfan GSI Tool)
Information:
Android Version: 10
LineageOS Version: 17.0
Build date: 09/09/2019
Build Type: Unofficial
Build Status: Almost stable
Size: 824MB
Known Bugs:
DT2W, Chrome Unstable (use another browser)
Changes:
Added GApps
Added Wolf 3.5 kernel
Added Snapdragon audio+
Fixed Hotspot
Fixed Rounded Corners
Fixed Heating issue
Changed Messaging app
Some other Improvements
How To Flash:
Wipe Cache, dalvik, system, data, vendor
Flash ROM (Don't flash GApps)
Reboot system
Source code: https://github.com/resk84/releases/...ineage-17.0-Aonly-10-20190909-ErfanGSI.img.7z
Kernel source: https://github.com/Sukrut4778/kernel_xiaomi_rosy
Download: Mega Link, G-Drive
Thanks to: Erfan Abdi, Resk84(ZJRDroid GSIs)
ayandebnath said:
Hey All,
So here is LineageOS 17 Port ROM for Redmi 5 Rosy
(Ported from Resk84's GSIBuilt with Erfan GSI Tool)
Information:
Android Version: 10
LineageOS Version: 17.0
Build date: 09/09/2019
Build Type: Unofficial
Build Status: Almost stable
Size: 824MB
Known Bugs:
DT2W, Chrome Unstable (use another browser)
Changes:
Added GApps
Added Wolf 3.5 kernel
Added Snapdragon audio+
Fixed Hotspot
Fixed Rounded Corners
Fixed Heating issue
Changed Messaging app
Some other Improvements
How To Flash:
Wipe Cache, dalvik, system, data, vendor
Flash ROM (Don't flash GApps)
Reboot system
Download:Mega Link, G-Drive
Thanks to: Erfan Abdi, Resk84(ZJRDroid GSIs)
Click to expand...
Click to collapse
Flashing instructions ??
And are the gapps included??
Flashing instructions given, GApps also included.. see changes
Nice work but the unstable Chrome was an issue for me.
Hi, its really exciting to see such an early Q for Rosy. May I know if VoLTE, bluetooth and wifi is working as these are broken in most GSI ported ROM.
I can confirm that WiFi works but I didn't connect my Bluetooth and I don't use volte.
I can also confirm that Chrome beta seems to work perfectly and doesn't suffer like regular Chrome but I still get the odd error opening the play store.
anik.debnath said:
Hi, its really exciting to see such an early Q for Rosy. May I know if VoLTE, bluetooth and wifi is working as these are broken in most GSI ported ROM.
Click to expand...
Click to collapse
Yes wifi, hotspot, volte almost everything is working fine..
I'm gonna try Phhusson's pure AOSP 10 v200 GSI too
For some reason the WiFi for me isnt working, its freezes the whole UI and have to Hard Restart, apart from that the rom was working fine.
Don't know why can't play any video in gallery or in any other players (tried several) and also YouTube crashes when played video.
Zero problems except Android services randomly freezing apps such as chrome
Okay so ive been using this rom since the day it got published here and what do i say, its super fun to try and so good!
Really everything that android 10 has offered me so far is just amazing and i dont know how much more i can expect!
Some cons are here since this is ported which are wifi cast not working, bluetooth not working properly (the device connects but the system ui crashes for some reason), the battery drains a bit quicker and the double tap 2 wake and no chrome support yet, but apart from that, the rom hasn't been an issue for me and i am gonna use it more and more!
Unknown668701 said:
Don't know why can't play any video in gallery or in any other players (tried several) and also YouTube crashes when played video.
Click to expand...
Click to collapse
Video player working fine.. include yt, mx, etc
Manosdocpap said:
Zero problems except Android services randomly freezing apps such as chrome
Click to expand...
Click to collapse
Thanks for your support
harmeetsingh_yt said:
Okay so ive been using this rom since the day it got published here and what do i say, its super fun to try and so good!
Really everything that android 10 has offered me so far is just amazing and i dont know how much more i can expect!
Some cons are here since this is ported which are wifi cast not working, bluetooth not working properly (the device connects but the system ui crashes for some reason), the battery drains a bit quicker and the double tap 2 wake and no chrome support yet, but apart from that, the rom hasn't been an issue for me and i am gonna use it more and more!
Click to expand...
Click to collapse
Thanks for your support and feedback..:fingers-crossed:
Btw, u can fix Bluetooth audio by enabling Media only.
ayandebnath said:
Thanks for your support and feedback..:fingers-crossed:
Btw, u can fix Bluetooth audio by enabling Media only.
Click to expand...
Click to collapse
Hello! No problem mate, the ROM is super awesome and it hasn't let me down yet, still using everyday with no problems!
What do you enable Media only?
A big thank you for creating an amzazing rom for our Redmi 5
The problems:
Screen freeze when open app, nothing can fix except restart phone
'Google Service has stop' pops up sometime but it does not affect anything
Thank you once again
Me #Raja singh
ayandebnath said:
Hey All,
So here is LineageOS 17 Port ROM for Redmi 5 Rosy
(Ported from Resk84's GSI Built with Erfan GSI Tool)
Information:
Android Version: 10
LineageOS Version: 17.0
Build date: 09/09/2019
Build Type: Unofficial
Build Status: Almost stable
Size: 824MB
Known Bugs:
DT2W, Chrome Unstable (use another browser)
Changes:
Added GApps
Added Wolf 3.5 kernel
Added Snapdragon audio+
Fixed Hotspot
Fixed Rounded Corners
Fixed Heating issue
Changed Messaging app
Some other Improvements
How To Flash:
Wipe Cache, dalvik, system, data, vendor
Flash ROM (Don't flash GApps)
Reboot system
Source code: https://github.com/resk84/releases/...ineage-17.0-Aonly-10-20190909-ErfanGSI.img.7z
Kernel source: https://github.com/Sukrut4778/kernel_xiaomi_rosy
Download: Mega Link, G-Drive
Thanks to: Erfan Abdi, Resk84(ZJRDroid GSIs)
Click to expand...
Click to collapse
Great work by great man....?
anik.debnath said:
Hi, its really exciting to see such an early Q for Rosy. May I know if VoLTE, bluetooth and wifi is working as these are broken in most GSI ported ROM.
Click to expand...
Click to collapse
i am currently using this rom. Pretty Stable and fast. No lags. Though i am not a heavy user so i haven't faced any heating issue. And Volte, bluetooth and wifi, dual sim works perfectly. One issue i faced There is an internal application called "app.android.com" it stops working due to that sometimes your network with automatically turn off and automatically gets on after some milliseconds. You will barely notice that bug. (TIP- once you get that stopped popup notification after every restart of your phone you can go to app info -> force stop. After doing that you will not face that random network off and on issue) Am using this rom from last 3 days.. And i am not facing any other issue. And this rom is Far better that MIUI. and yeah forget to mention that.. Battery life is brilliant after you switch on the dark mode
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
INSTRUCTIONS
Download latest ROM, Gapps, Magisk
Reboot to Recovery
Wipe system, data, cache and dalvik
Install all
Reboot
Downloads
ROM: https://www.androidfilehost.com/?w=files&flid=306905
Gapps: https://opengapps.org/
TWRP: https://drive.google.com/file/d/1-BZiHJt2uWhVJ8rut72fbSZPDz175DMK/view?usp=drivesdk
NOTE:
Clean Flash is recommended, i.e.. Wipe data,cache,dalvik cache, system
If you dont wipe system, backuptool will reapply your modifications that support addon.d like GApps etc..
Recommended to use Pico Gapps
Device Sources: https://github.com/xiaomi-classic-dev
XDA:DevDB Information
LineageOS 17.1, ROM for the Xiaomi Mi 3
Contributors
vikash1994b, Special Thanks to Xiaomi-classic-dev Team for the sources
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Testing
Created 2020-03-29
Last Updated 2020-04-16
16.04.2020
⚛ Fixed Reboot tile, properly shows reboot to recovery
⚛ Fixed device auto wake up when lockscreen set to none.
⚛ Few kernel improvements and optimisation taken from common msm8974 devices.
⚛ LineageOS latest changes.
12.04.2020
⚛ April Security Patch
⚛ Added Pixel UI, i.e.. framework colors (check settings in dark mode)
⚛ Added Reboot/Recovery/Power off tile. Tap to change mode and long press to activate.
⚛ Improved DT2W implementation
⚛ Fixed Capacitive Keys not disabling when on screen navigation bar is enabled.
⚛Lineage Latest changes
04.04.2020
⚛ Disabled Trust warning notification for selinux and sign.
⚛ lineageOS Upstream changes.
03.04.2020
⚛ Open Gapps Compatibility: Increased Free space in System partition, now we have almost 280MB of free space,so now open gapps can be easily flashed.
⚛ Patched SafetyNet , Now SafetyNet Check passes even without Magisk.
⚛ Added Double Tap to Wake
⚛ Added Three Finger Swipe for Screenshot. Credits to MokeeRom
⚛ Implemented OTA Update, so from now on you can get updates directly via Lineage OS updater.
⚛ Device Tree Cleanup
⚛ Lineage OS upstream changes
30.03.2020
⚛ Updated Fingerprint to fix vendor missmatch
⚛ Bring in some optimsation from Android GO
⚛ Added SystemUI to PRODUCT_DEXPREOPT_SPEED_APPS
⚛ Disable SF Latch Buffer Signaled property
⚛ Enabled GL comp backpressure
⚛ Disabeld SF backpressure
29.03.2020
⚛ Initial Release
Which gapps are recommended?
[email protected] said:
Which gapps are recommended?
Click to expand...
Click to collapse
The one i use is this https://drive.google.com/file/d/1-4_3zTu56gnay4zUV_8NZgKJOXnQhh8Q/view?usp=drivesdk and it works fine.
Here are some screenshots of this rom.
vikash1994b said:
The one i use is this https://drive.google.com/file/d/1-4_3zTu56gnay4zUV_8NZgKJOXnQhh8Q/view?usp=drivesdk and it works fine.
Click to expand...
Click to collapse
And which twrp , multi rom or normal twrp
[email protected] said:
And which twrp , multi rom or normal twrp
Click to expand...
Click to collapse
Normal TWRP!
[email protected] said:
And which twrp , multi rom or normal twrp
Click to expand...
Click to collapse
File can't be downloaded , unsupported.
[email protected] said:
File can't be downloaded , unsupported.
Click to expand...
Click to collapse
As I know, twrp 3310 had some problem, so i still v3210 (3230 should be ok too) and it works fine!
You may download it from TWRP website directly, if v3230 has problem, just let me know, I can upload v3210 to g-driver later!
r30857 said:
As I know, twrp 3310 had some problem, so i still v3210 (3230 should be ok too) and it works fine!
You may download it from TWRP website directly, if v3230 has problem, just let me know, I can upload v3210 to g-driver later!
Click to expand...
Click to collapse
No problem in downloading twrp, can't download gapps.
[email protected] said:
No problem in downloading twrp, can't download gapps.
Click to expand...
Click to collapse
Ok, I will upload the BiTGapps after 10 minutes
(Opengapps doesn't work due to space issue, no matter Pico or Nano )
Edit:
Here you go!
https://drive.google.com/file/d/1-ctmk8kWrclKJ6akg-UJg_NcsSwB_z9o/view?usp=drivesdk
Very good effort...
New Lineage OS Builds is up (30-03-2020)
Download https://androidfilehost.com/?fid=4349826312261757707
Changelogs
Updated Fingerprint to fix vendor missmatch
Bring in some optimsation from Android GO
Added SystemUI to PRODUCT_DEXPREOPT_SPEED_APPS
Disable SF Latch Buffer Signaled property
Enabled GL comp backpressure
Disabeld SF backpressure
Hi, are you thinking about future releases (something like one every month or so) with bug correction and, maybe, improvements?
Can you suggest a specific kernel/camera/video driver for this builds, or the included ones are good?
Thanks.
keru32 said:
Hi, are you thinking about future releases (something like one every month or so) with bug correction and, maybe, improvements?
Can you suggest a specific kernel/camera/video driver for this builds, or the included ones are good?
Thanks.
Click to expand...
Click to collapse
I will most probably be providing monthly security updates. I dont think there are custom kernel available for cancro. So you're left with the the included one. Give it a try rom is stable enough with no major bug or FC.
vikash1994b said:
I will most probably be providing monthly security updates. I dont think there are custom kernel available for cancro. So you're left with the the included ones. Give it a try rom is stable enough with no major bug or FC.
Click to expand...
Click to collapse
Totally agree!
To this old device and with this stable ROM, monthly security updates should be enough!
I install this ROM for 2 days, no FC and no major bug (although i cannot pass the safetynet, but it is ok) very smooth with good battery performance! And the temperature also outstanding when play a game!
Thanks for the great ROM!:good:
r30857 said:
Totally agree!
To this old device and with this stable ROM, monthly security updates should be enough!
I install this ROM for 2 days, no FC and no major bug (although i cannot pass the safetynet, but it is ok) very smooth with good battery performance! And the temperature also outstanding when play a game!
Thanks for the great ROM!:good:
Click to expand...
Click to collapse
There is a workaround to pass safetynet on latest build. You need to install magisk and enabling magisk hide.
vikash1994b said:
I will most probably be providing monthly security updates. rom is stable enough.
Click to expand...
Click to collapse
Excellent, what else is required for a legendary device.
Unbelievable that this solid device will get a stable build of lineage os 17.1 - mother of all custom roms even after so many years. Thank you very much.
vikash1994b said:
There is a workaround to pass safetynet on latest build. You need to install magisk and enabling magisk hide.
Click to expand...
Click to collapse
Thanks for the information, i tried it but no lucky, its okay, to me, not an issue!
But could you check the Bluetooth is functional our not?
Tried to using BT but seems not working?
Thanks in advance!
Installed the rom. It's very smooth and stable. Battery is also doing fine. Didn't put a sim and check it. Installed magisk 20.3 and updated to 20.4.
Gapps by the op is working, opengapps could not be installed.
My son played some games with it and was satisfied with its performance.
Haven't checked BT.
Installed YouTube vanced black edition from magisk download.
Will try to install magisk modules for safetynet bypass.
The speaker of my phone is faulty so can't comment about sound.
The rom is an excellent build and the device has surpassed itself.
I wanted to install a gcam port for it. I tried several builds but none of them could even be installed. (i know I'm off topic here). I'll delete this line if the op takes an exception. So if anyone is aware of any working gcam build/port kindly tell me. The device has an excellent sensor for camera.
Also an option to use power menu on the hardware button long press / double tap would have been very useful. I'm presently using a 3rd party app from play store for power off /reboot /reboot to recovery etc as the power button is on the way to its grave due to old age. Otherwise the device is in excellent condition.
Double tap to wake is a very desirable feature due to power button eol and volume button wake is there but these also might get finished due to regular use.
Am using greenify and gravity based wake up to save the power button.