Can't boot no matter what Stock Rom I flash - Samsung Galaxy S8 Questions and Answers

I've been using my S8 G950F for one week (Nougat Stock, don't recall which specific rom, no root nor nothing) until it suddenly froze, tried to reboot but couldn't get past the Samsung logo screen. I tried to flash a stock firmware using Odin but got a Fail with the Device Info error which I could successfully fix with the so well known trick of getting back to download mode real quick.
Now I can flash any rom I want (downloaded from Updato) without any issues (PASS on odin), but no matter what ROM I flash I still can't get past the Samsung logo. I tried flashing both Nougat (AQF7 and AQL5), Oreo (CRAP, CRC7 and CRD7) using Oding 3.12.3 and 3.13.1 (for Oreo roms).
I also tried using Prince Comsy's Odin and once again got the Device Info error but using the same trick as before I could flash a Nougat rom but still can't get past the Samsung logo.
Is there anything I'm doing wrong? Should I flash any particular ROM or in a specific order? Should I try with other Odin version? KIES doesn't detect my device.
Any help is greatly appreciated! I just don't know what else to try and I can't find nobody nobody that has had the same issue I'm facing.
Thanks in advance! Any additional info you may need just ask me!
PS: one thing that caught my attention is that when I go to download mode it says: Knox 0x0 and "System Status: Custom". Is that alright?

Related

[Q] Soft bricked after 4.4.2 update failed, please help.

Hey guys
I have a Hong Kong Note 3 N9005. Yesterday I flashed the 4.4.2 sammobile update to my phone using ODIN 3.09. I had auto reboot and f.reset ticked. The ROM was put in AP and I hit start. Then I received the error Invalid ext4 Image. Turns out that Hong Kong versions of the N3 cannot install European ROMs. Since then I have not been able to boot my device into android. I just loop into download mode telling me it detected a firmware update. Kies was no help.
The update DID update the bootloader, so now I cannot go back to stock ROM. I have tried a few things. I tried flashing the stock Hong Kong ROM MK1, it fails. So i found a guy that fixed a similar problem buy removing the aboot.mbn file and repacking the ROM. Tried that too and the ROM flashes but it leaves me in a bootloop. Phone turns on says booting recovery then restarts. I also tried cf-root in an effort to flash another ROM still not working. I cannot get into recovery mode no matter what I do.
It seems I have run out of ideas and am reaching out for help.
Robbbie said:
Hey guys
I have a Hong Kong Note 3 N9005. Yesterday I flashed the 4.4.2 sammobile update to my phone using ODIN 3.09. I had auto reboot and f.reset ticked. The ROM was put in AP and I hit start. Then I received the error Invalid ext4 Image. Turns out that Hong Kong versions of the N3 cannot install European ROMs. Since then I have not been able to boot my device into android. I just loop into download mode telling me it detected a firmware update. Kies was no help.
The update DID update the bootloader, so now I cannot go back to stock ROM. I have tried a few things. I tried flashing the stock Hong Kong ROM MK1, it fails. So i found a guy that fixed a similar problem buy removing the aboot.mbn file and repacking the ROM. Tried that too and the ROM flashes but it leaves me in a bootloop. Phone turns on says booting recovery then restarts. I also tried cf-root in an effort to flash another ROM still not working. I cannot get into recovery mode no matter what I do.
It seems I have run out of ideas and am reaching out for help.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2507403 flash this with cwm or twrp should work
jaythenut said:
http://forum.xda-developers.com/showthread.php?t=2507403 flash this with cwm or twrp should work
Click to expand...
Click to collapse
Hello thanks for replying.
Only problem is I cannot get into cwm or twrp. Any advice on what I can do to try to get CWM or twrp working? I can flash with ODIN. But with the CWM I tried it still just boot loops and does not allow me to get into recovery.
Thank in advanced.
Robbbie said:
Hey guys
I have a Hong Kong Note 3 N9005. Yesterday I flashed the 4.4.2 sammobile update to my phone using ODIN 3.09. I had auto reboot and f.reset ticked. The ROM was put in AP and I hit start. Then I received the error Invalid ext4 Image. Turns out that Hong Kong versions of the N3 cannot install European ROMs. Since then I have not been able to boot my device into android. I just loop into download mode telling me it detected a firmware update. Kies was no help.
The update DID update the bootloader, so now I cannot go back to stock ROM. I have tried a few things. I tried flashing the stock Hong Kong ROM MK1, it fails. So i found a guy that fixed a similar problem buy removing the aboot.mbn file and repacking the ROM. Tried that too and the ROM flashes but it leaves me in a bootloop. Phone turns on says booting recovery then restarts. I also tried cf-root in an effort to flash another ROM still not working. I cannot get into recovery mode no matter what I do.
It seems I have run out of ideas and am reaching out for help.
Click to expand...
Click to collapse
Same Issue here. I tried to install the 4.4.2 N9005XXUENA6_N9005OXXENA5_N9005XXUENA2 update on my Note 3 via odin 3.09.
Got an ext4 update failed error.
After this, the phone's bricked and is stuck on the Kies Recovery Screen. I tried to go into recovery mode in Kies, but it says this model does not have initialization.
I tried installing a 4.3 N9005XXUDMK3_N9005TNLDMK1_N9005XXUDMK2, but again failed. Download mode shows SW REV CHECK FAIL : [aboot] Fused 3 > Binary 2
Can someone please guide me to unbrick my phone?
I don't know what ROM I was on initially. It was the stock ROM that came with the phone.
I dont have CWM and TWRM installed.
Robbbie said:
Hey guys
I have a Hong Kong Note 3 N9005. Yesterday I flashed the 4.4.2 sammobile update to my phone using ODIN 3.09. I had auto reboot and f.reset ticked. The ROM was put in AP and I hit start. Then I received the error Invalid ext4 Image. Turns out that Hong Kong versions of the N3 cannot install European ROMs. Since then I have not been able to boot my device into android. I just loop into download mode telling me it detected a firmware update. Kies was no help.
The update DID update the bootloader, so now I cannot go back to stock ROM. I have tried a few things. I tried flashing the stock Hong Kong ROM MK1, it fails. So i found a guy that fixed a similar problem buy removing the aboot.mbn file and repacking the ROM. Tried that too and the ROM flashes but it leaves me in a bootloop. Phone turns on says booting recovery then restarts. I also tried cf-root in an effort to flash another ROM still not working. I cannot get into recovery mode no matter what I do.
It seems I have run out of ideas and am reaching out for help.
Click to expand...
Click to collapse
Got this response from MrAndroid12 in another thread I'd started:
"This is not a brick at all. Just add a .pit file and restart the upgrade via Odin again.
You should be fine."
I don't know how to add a .pit file though.
I am certain the bootloops are because it flashed the new bootloader. I think your best option is to wait for a dev like indie to release Omega V7 and try to flash that through Odin.
Or if you can extract the different partitions from the original thread you can try push them one by one with Odin.
hallydamaster said:
I am certain the bootloops are because it flashed the new bootloader. I think your best option is to wait for a dev like indie to release Omega V7 and try to flash that through Odin.
Or if you can extract the different partitions from the original thread you can try push them one by one with Odin.
Click to expand...
Click to collapse
It is the bootloader yes. But it NEEDS the bootloader to be able to boot in to KitKat. And there is no downgrading once you've installed the new BL.
Best option is to re-flash via ODIN again and not wait 2 weeks for a Dev to modify a custom ROM...
Solution
Here is the solution:
http://forum.xda-developers.com/showpost.php?p=49426283&postcount=14
m1ndst0rm said:
Here is the solution:
http://forum.xda-developers.com/showpost.php?p=49426283&postcount=14
Click to expand...
Click to collapse
Works thanks
Sent from my SM-N9005 using XDA Premium 4 mobile app

[Q] I9500 flash gone wrong, need help please

HI Guys,
I flashed the Lollipop 5.0.1 CHN firmware and rooted the phone to install the Google apps, then when the India Firmware came i tried to flash that via Odin, it failed. and bricked the phone, could get into download mode but all firmware i've tried fails.
i tried numerous thing to a point where i can now only get CWM- recovery or TWRP open recovery on the phone, and then it allows me to get back into download mode with swver A3, but Odin still fails almost immediately.
help would be much appreciated
regards
Brendan
Vergil069 said:
HI Guys,
I flashed the Lollipop 5.0.1 CHN firmware and rooted the phone to install the Google apps, then when the India Firmware came i tried to flash that via Odin, it failed. and bricked the phone, could get into download mode but all firmware i've tried fails.
i tried numerous thing to a point where i can now only get CWM- recovery or TWRP open recovery on the phone, and then it allows me to get back into download mode with swver A3, but Odin still fails almost immediately.
help would be much appreciated
regards
Brendan
Click to expand...
Click to collapse
So this means you can into Download Mode which is quite a good thing.
Now what you do is download the particular Kies for S4 from the OEM site and connect it when your phone is in Download or that wierd Yellow Triangle with the sign to connect to PC, and then kies will try to save ur phone.
came accross this http://forum.xda-developers.com/showthread.php?t=2269941
Odin completed success fully, but now phone just hangs just after it askes to select the OS language ps. i used the lollipop india rom with the pit in the mentioned post
install a custom recovery using odin like philztouch and do a full wipe to install new rom
will i need a new PIT file?, after full wipe just Odin and lollipop 5.0.1 as normal?

Stuck on recovery after using CF-Auto-Root

So I have a galaxys s5 g900f which i cleared it from a rom i used before and got it back to the original form of it. Got the .tar.md5 file of the official galaxy software from sammobile and installed it with odin. After that I wanted to root my phone again and stick with the official software. I tried to do that by the way I always used to with CF-Auto-Root using Odin once more and after downloading the file my phone was normally rebooting to recovery but it actually got stuck there without doing anything. Tried to flash twrp too but still nothing. The only thing i can flash at the time is the official software. Anyone had this issue before and can help? Thanks in advance
Flash the stock ROM again and get your phone back up and working properly
Then use this guide to root / twrp
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2

Help please!!!!

My gf forgot her unlock pattern and her backup password on her N9005. I tried doing firmware install through ODIN but it failed and now the phone is displaying "firmware upgrade encountered an issue". I downloaded the firmware form Sammobile and tried flashing it several times, but no success. Phone enters download mode only, i am unable to get into recovery.
The GALAXY Note 3 LTE (SM-N9005) firmware is the one i tried flashing but i also noticed that there's a SM-N9005 (GALAXY NOTE3) so, i'm downloading that one to try (seems like the same though). Was wondering if that could be the problem why it keeps failing in ODIN?
Can you guys enlighten me or assist me in getting the device back up and running please. Many thanks in advance.
update guys: progress
I ODIN-ed TWRP to the device so now i have access to files and can install root, then flash a custom rom to get the device up and running again. I will try an official firmware flash through ODIN when i get the device up again.

Softbricked A5(2016) A510F - can't install firmware

Hey there!
So it seem like I bricked a friends A510F
Wifi, bluetooth, mobile data all weren't working properly and there were some minor difficulties with performance so we decided to install AOSP...
All her data is secured so I seached for a good ROM and tried to install TWRP from here. Installing via Odin sadly failed so now I have device without Android, only OdinMode is working, but all attempts to install either twrp for a custom ROM or Samsung original firmware failed...
Any clues what I'm doing wrong? Haven't done a Samsung device so far...
All suggestions welcome
yanness
Download repair firmware from xda and flash it through odin.it will probably work!
yanness said:
Hey there!
So it seem like I bricked a friends A510F
Wifi, bluetooth, mobile data all weren't working properly and there were some minor difficulties with performance so we decided to install AOSP...
All her data is secured so I seached for a good ROM and tried to install TWRP from here. Installing via Odin sadly failed so now I have device without Android, only OdinMode is working, but all attempts to install either twrp for a custom ROM or Samsung original firmware failed...
Any clues what I'm doing wrong? Haven't done a Samsung device so far...
All suggestions welcome
yanness
Click to expand...
Click to collapse
Flash correct stock ROM.
yanness said:
Hey there!
So it seem like I bricked a friends A510F
Wifi, bluetooth, mobile data all weren't working properly and there were some minor difficulties with performance so we decided to install AOSP...
All her data is secured so I seached for a good ROM and tried to install TWRP from here. Installing via Odin sadly failed so now I have device without Android, only OdinMode is working, but all attempts to install either twrp for a custom ROM or Samsung original firmware failed...
Any clues what I'm doing wrong? Haven't done a Samsung device so far...
All suggestions welcome
yanness
Click to expand...
Click to collapse
What happens when the phone is turned on? Does it get stuck in boot logo and stays like that? Try flashing stock bootloader. Also give details on which firmware u were on. What error do u get in odin?
Hello Sirs,
Please, can anybody help me? It is very weird what is happening!
After to go and download the original firmware in Sammobile, I used odin to install a stock rom! Odin is OK (process completed) but when it is trying to start, the logo samsung is blocked (bootloader). I have tried to modify the hidden.img to hidden.img.tar and I have use Odin but nothing looks like to work. Can anybody help me?
Thanks so much in advance!
Additional info: The device has not been rooted, etc.
hey i use a galaxy a510F currently and evertime i get FRP locked, software deleted, broken rom or twrp, my final solution is to odin flash a PERFECTLY WORKING STOCK ROM (which i had to try downloading from 3 or 4 different sites) and then i'd flash twrp ( official ) and restore one of by backups if needed. last time i had to flash because i hot frp locked tring out a new rom. i flashed over a stock rom and i got my phone working surprisingly without even losing my apps.
file i used is:" INS-A510FXXU8CSF1-20190710103917.zip"
pm me if u need a link (its in my drive)
Julurolo said:
Hello Sirs,
Please, can anybody help me? It is very weird what is happening!
After to go and download the original firmware in Sammobile, I used odin to install a stock rom! Odin is OK (process completed) but when it is trying to start, the logo samsung is blocked (bootloader). I have tried to modify the hidden.img to hidden.img.tar and I have use Odin but nothing looks like to work. Can anybody help me?
Thanks so much in advance!
Additional info: The device has not been rooted, etc.
Click to expand...
Click to collapse
Can you take photo and post here your download mode screen?....
Regards
Julurolo said:
Hello Sirs,
Please, can anybody help me? It is very weird what is happening!
After to go and download the original firmware in Sammobile, I used odin to install a stock rom! Odin is OK (process completed) but when it is trying to start, the logo samsung is blocked (bootloader). I have tried to modify the hidden.img to hidden.img.tar and I have use Odin but nothing looks like to work. Can anybody help me?
Thanks so much in advance!
Additional info: The device has not been rooted, etc.
Click to expand...
Click to collapse
Same all the time restored stock.., needs to enter recovery (stock) and wipe cache/dalvik. Then restart and it's ok ?
Hi at all.Ive same problem.
a5 sm-a510f
One day i boot it,and nothing in the screen.
I cant boot in recovery (like it doesnt exist).
I can boot only in download mode
So,I've download stock A510FXXS8CSF3_A510FOXA8CSF3_A510FXXS8CSF3_HOME and with odin pass.
One time reboot,same situation. (i do this step several and several time)
Ive try to install a recovery,but FRP,lock my install
So,what can i do?Open the window of my room

Categories

Resources