Hello,
I recently wanted to go back to stock so i used erecovery to do it, it completed with 100% but now my phone is not responsive at all, nothing shows on screen, led doesn't work, when i plug it in the pc it detects it but its in fastboot mode and bootloader is locked.
If you have any way to undo this, please tell me
davidhozic said:
Hello,
I recently wanted to go back to stock so i used erecovery to do it, it completed with 100% but now my phone is not responsive at all, nothing shows on screen, led doesn't work, when i plug it in the pc it detects it but its in fastboot mode and bootloader is locked.
If you have any way to undo this, please tell me
Click to expand...
Click to collapse
Unlock bootloader and see if then you can boot the system
davidhozic said:
Hello,
I recently wanted to go back to stock so i used erecovery to do it, it completed with 100% but now my phone is not responsive at all, nothing shows on screen, led doesn't work, when i plug it in the pc it detects it but its in fastboot mode and bootloader is locked.
If you have any way to undo this, please tell me
Click to expand...
Click to collapse
Does it show like this?
K3RN3L_P4N1C said:
Does it show like this?
Click to expand...
Click to collapse
No, your display is turned on and booted but you have a black screen, you can see the buttons and the led works in your case...
my phone doesn't turn on the display and fastboot says my device is pra-sth..
Eurofighter_ty said:
Unlock bootloader and see if then you can boot the system
Click to expand...
Click to collapse
Can you provide me the product id for the p10 lite? It should be the same across all p10 lite's
davidhozic said:
No, your display is turned on and booted but you have a black screen, you can see the buttons and the led works in your case...
my phone doesn't turn on the display and fastboot says my device is pra-sth..
Click to expand...
Click to collapse
RIP Phone
davidhozic said:
Can you provide me the product id for the p10 lite? It should be the same across all p10 lite's
Click to expand...
Click to collapse
The partition ?
Eurofighter_ty said:
The partition ?
Click to expand...
Click to collapse
"partition"? What?? product ID, you need it on the huawei's site for the bootloader code
Related
Hi,
I bought a water damaged P8 Lite for repair/parts that I was able to bring back to life.
However, volume up key is not working, and phone has a password on it.
I tried a different set of buttons but the problem is in the board.
Consequently I can't boot recovery mode and hard reset the phone.. Is there any other solution to solve this and use this board?
Thanks.
Use fastboot to flash a new firmware....this should work
madz78 said:
Hi,
I bought a water damaged P8 Lite for repair/parts that I was able to bring back to life.
However, volume up key is not working, and phone has a password on it.
I tried a different set of buttons but the problem is in the board.
Consequently I can't boot recovery mode and hard reset the phone.. Is there any other solution to solve this and use this board?
Thanks.
Click to expand...
Click to collapse
Well, since you bought water defective P8 Lite, i guess you're having problem on the board (or at least with hardware), and if that's the case then it is better to change the hardware.
But, you can also once try flashing new firmware via fastboot method. Remember flashing requires your bootloader to be unlocked, so make sure it is..
The Process??
Enable Developers Option and USB debugging (assuming that you can switch it on)
Connect your mobile to laptop/computer.
Make sure you have Minimal ADB and Fastboot Installed. Download link: http://forum.xda-developers.com/showthread.php?t=2317790
Commands:
adb devices ---- will show your serial number if its enabled
adb reboot bootloader --- will show your bootloader status (if it's green then you can flash files)
amageek said:
Well, since you bought water defective P8 Lite, i guess you're having problem on the board (or at least with hardware), and if that's the case then it is better to change the hardware.
But, you can also once try flashing new firmware via fastboot method. Remember flashing requires your bootloader to be unlocked, so make sure it is..
The Process??
Enable Developers Option and USB debugging (assuming that you can switch it on)
Connect your mobile to laptop/computer.
Make sure you have Minimal ADB and Fastboot Installed. Download link: http://forum.xda-developers.com/showthread.php?t=2317790
Commands:
adb devices ---- will show your serial number if its enabled
adb reboot bootloader --- will show your bootloader status (if it's green then you can flash files)
Click to expand...
Click to collapse
Hi,
Unfortunately I'm unable enable usb debugging and can't read the device...
Will huawei SW do any good?
madz78 said:
Hi,
Unfortunately I'm unable enable usb debugging and can't read the device...
Will huawei SW do any good?
Click to expand...
Click to collapse
huawei SW?? i didn't get that.. can you explain please
amageek said:
huawei SW?? i didn't get that.. can you explain please
Click to expand...
Click to collapse
I mean Hisuite or any other..
madz78 said:
I mean Hisuite or any other..
Click to expand...
Click to collapse
hisuite is pretty much useless.
yeah.. I was able to enter fastboot&rescue mode with hisuite but from there i can't recover anything..
Is there any flasher that allows me to flash phone via rescue mode?
Thanks.
Hey, I might have something here, in rescue mode adb doesn't see any devices but using "fastboot devices" i get "QLF7N15615001024"
Can I work with this?
Thanks.
Just read before posting. Since you can enter fastboot just go ahead and download a fastboot flashable firmware from the various threads in this subforum or extract the images from the update.app you want to flash using huawei image extractor.
deleted
keikari said:
deleted
Click to expand...
Click to collapse
keikari are you from finland too?
gabrielkor00 said:
keikari are you from finland too?
Click to expand...
Click to collapse
Yeah
I had a custom rom installed on my zenfone 5 in working condition.Then i got a new cell and put the zenfone away safely.After few months..around 5-6 months,i checked my zenfone again and WTF!!! It wont boot!!!
It just showed a big red rectangle on the screen,the device do charges,also it goes to fastboot and recovery mode,but i cant flash any rom using twrp. It gives the error message that "Failed to mount '/system' (invalid argument)".
I am helpless,I tried changing the system using twrp to FAT,EXT4 and so on,but nothing helped,still the same ERRORS!!!
Please help me with this problem ASAP guyz,I mentioned every detail i can,also attached photos of the error and red rectangle,do check them.THank YOU
iamtj said:
I had a custom rom installed on my zenfone 5 in working condition.Then i got a new cell and put the zenfone away safely.After few months..around 5-6 months,i checked my zenfone again and WTF!!! It wont boot!!!
It just showed a big red rectangle on the screen,the device do charges,also it goes to fastboot and recovery mode,but i cant flash any rom using twrp. It gives the error message that "Failed to mount '/system' (invalid argument)".
I am helpless,I tried changing the system using twrp to FAT,EXT4 and so on,but nothing helped,still the same ERRORS!!!
Please help me with this problem ASAP guyz,I mentioned every detail i can,also attached photos of the error and red rectangle,do check them.THank YOU
Click to expand...
Click to collapse
Sounds like a partition issue, How did you unlocked the bootloader and installed twrp??
$tark3 said:
Sounds like a partition issue, How did you unlocked the bootloader and installed twrp??
Click to expand...
Click to collapse
The bootloader was unlocked,i didnt relocked it,TWRP was installed the day i rooted my phone,that is a year ago,in short.i installed twrp when my cell phone was running fine
iamtj said:
The bootloader was unlocked,i didnt relocked it,TWRP was installed the day i rooted my phone,that is a year ago,in short.i installed twrp when my cell phone was running fine
Click to expand...
Click to collapse
ok, what do you meant by bootloader was unlocked? you got it unlocked or you unlocked it? if yes how?
$tark3 said:
ok, what do you meant by bootloader was unlocked? you got it unlocked or you unlocked it? if yes how?
Click to expand...
Click to collapse
Well I dont remember,There was a command window type software which had options to unlock and relock bootloader.
Last time i unlocked bootloader was months ago
iamtj said:
Well I dont remember,There was a command window type software which had options to unlock and relock bootloader.
Last time i unlocked bootloader was months ago
Click to expand...
Click to collapse
You tried Debrick method which uses cloverview?
$tark3 said:
You tried Debrick method which uses cloverview?
Click to expand...
Click to collapse
yeah,but couldn't get my phone in clover view
iamtj said:
yeah,but couldn't get my phone in clover view
Click to expand...
Click to collapse
I've posted a reply. Try it
$tark3 said:
I've posted a reply. Try it
Click to expand...
Click to collapse
but i cant get into clover view mode,thats the problem
iamtj said:
but i cant get into clover view mode,thats the problem
Click to expand...
Click to collapse
can you post a ss of whats the command prompt when you connect the phone to the pc while holding vol -
$tark3 said:
can you post a ss of whats the command prompt when you connect the phone to the pc while holding vol -
Click to expand...
Click to collapse
OK,I will do that
i tried everything,even gave it to local repair shops,but the phone wont mount system,guess i will just throw it away
Clover view mode requires some drivers did you installed it (I don't remember, It's something like RNDIS )
Shubham_Ghodake said:
Clover view mode requires some drivers did you installed it (I don't remember, It's something like RNDIS )
Click to expand...
Click to collapse
The process is very complicated as well as time consuming,and it requires a lot of patience and will power to go through it again,I will see if I can do that again
Hello,I've flashed LineageOS before 1 week and it was all fine,but I had signal problems so i downloaded stock rom from official website and used huawei extraction tool to flash it with TWRP,after flashing i tried to reboot but the phone won't turn on..My device is P8 lite ALE-21.
Saleone said:
Hello,I've flashed LineageOS before 1 week and it was all fine,but I had signal problems so i downloaded stock rom from official website and used huawei extraction tool to flash it with TWRP,after flashing i tried to reboot but the phone won't turn on..My device is P8 lite ALE-21.
Click to expand...
Click to collapse
Boot to bootloader by press volume down and power at same time and plug phone to PC fast! Then lets see what you have.
Saleone said:
Hello, I've flashed LineageOS before 1 week and it was all fine, but I had signal problems so I downloaded the stock ROM from the official website and used Huawei extraction tool to flash it with TWRP, after flashing I tried to reboot but the phone won't turn on. My device is P8 lite ALE-21.
Click to expand...
Click to collapse
Had the same problem going back to Stock from LineageOS... Did you clear the System too? Back then, in order to install LineageOS, you'd have to clear the System too... And then flash the LineageOS...
So for reverting back, do the same... Wipe the System and then log in to fastboot mode and then flash the 4 Images extracted from the Huawei Update Extractor... If by any means, you could not go into fastboot mode, then connect your phone to your laptop by holding the volume down key, this should boot into the fastboot mode...
Good luck..
amageek said:
Had the same problem going back to Stock from LineageOS... Did you clear the System too? Back then, in order to install LineageOS, you'd have to clear the System too... And then flash the LineageOS...
So for reverting back, do the same... Wipe the System and then log in to fastboot mode and then flash the 4 Images extracted from the Huawei Update Extractor... If by any means, you could not go into fastboot mode, then connect your phone to your laptop by holding the volume down key, this should boot into the fastboot mode...
Good luck..
Click to expand...
Click to collapse
Thanks for trying to help,but I can't turn my phone on,just the led blinks red-green-red and when i connected it to PC in Device Manager the phone was detected but with some weird chinese letters..
u fix?
Saleone said:
Hello,I've flashed LineageOS before 1 week and it was all fine,but I had signal problems so i downloaded stock rom from official website and used huawei extraction tool to flash it with TWRP,after flashing i tried to reboot but the phone won't turn on..My device is P8 lite ALE-21.
Click to expand...
Click to collapse
Man u fix this problem??? because i have same problem
Saleone said:
Thanks for trying to help,but I can't turn my phone on,just the led blinks red-green-red and when i connected it to PC in Device Manager the phone was detected but with some weird chinese letters..
Click to expand...
Click to collapse
Nicolas2000 said:
Man u fix this problem??? because i have same problem
Click to expand...
Click to collapse
You need to boot in fastboot mode! Don't you see? If fast boot works, you have hope, if not, then you are fu*kup!
Saleone said:
Hello,I've flashed LineageOS before 1 week and it was all fine,but I had signal problems so i downloaded stock rom from official website and used huawei extraction tool to flash it with TWRP,after flashing i tried to reboot but the phone won't turn on..My device is P8 lite ALE-21.
Click to expand...
Click to collapse
RootingPro-18 said:
You need to boot in fastboot mode! Don't you see? If fast boot works, you have hope, if not, then you are fu*kup!
Click to expand...
Click to collapse
only red and verdant ... and in device manager something with Chinese letters appears ..and HUAWEI USB COM 1.0 ...
Nicolas2000 said:
only red and verdant ... and in device manager something with Chinese letters appears ..and HUAWEI USB COM 1.0 ...
Click to expand...
Click to collapse
Boot to bootloader by press volume down and power at same time and plug phone to PC fast!
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
Can you enter fastboot mode?
No
varben said:
Can you enter fastboot mode?
Click to expand...
Click to collapse
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Anantha47 said:
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Click to expand...
Click to collapse
You are in Diagnostics mode, it's pretty useless, you need to enter in EDL Mode and try a flash with MiFlashTool
Use "fastboot oem edl"
I don't know if your phone can receive fastboot commands in Diagnostics, just try...
Can you please elaborate what have you done prior to the device brick? An informative answer requires an informative question.
Alanjameson99 said:
Can you please elaborate what have you done prior to the device brick? An informative answer requires an informative question.
Click to expand...
Click to collapse
I tried to install super su from boooting twrp !
Anantha47 said:
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Click to expand...
Click to collapse
What about keeping power and volume +/- pressed together for at least 10 seconds?
Too, connect the charger, maybe the battery is drained.
At least try these simple things before moving to complicated ones.
varben said:
What about keeping power and volume +/- pressed together for at least 10 seconds?
Too, connect the charger, maybe the battery is drained.
At least try these simple things before moving to complicated ones.
Click to expand...
Click to collapse
im 100% sure battery is above 70
Anantha47 said:
im 100% sure battery is above 70
Click to expand...
Click to collapse
Another thing to try is this, connect your phone with your computer and run
adb reboot edl
You will not see anything in your phone, just black screen.
Open miflash tool and hit refresh. See if it recognizes the phone.
varben said:
Another thing to try is this, connect your phone with your computer and run
adb reboot edl
You will not see anything in your phone, just black screen.
Open miflash tool and hit refresh. See if it recognizes the phone.
Click to expand...
Click to collapse
Already tried that mate it's showing either "sahara read end error with status 9" or "object reference not set to an instance of an object" the thing is I cant go into fast boot mode adb isn't recognising my device or even fastboot
Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Anantha47 said:
Already tried that mate it's showing either "sahara read end error with status 9" or "object reference not set to an instance of an object" the thing is I cant go into fast boot mode adb isn't recognising my device or even fastboot
Click to expand...
Click to collapse
At least mi flash is recognizing the phone.
You can try with a different firmware, try with android 7 firmware.
P.s. now that I see better your phone is recognized as Qualcomm HS-USB Diagnostics 900E, it should be 9008
You should try to find the correct Qualcomm drivers...
I'm sorry you have to go through this.
om_latex said:
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Click to expand...
Click to collapse
Can you please tell me or give m link for Qualcomm drivers I messed up drivers in the process
Anantha47 said:
Can you please tell me or give m link for Qualcomm drivers I messed up drivers in the process
Click to expand...
Click to collapse
Check this:
http://www.99mediasector.com/install-qualcomm-hs-usb-qdloader-9008-install/
varben said:
Check this:
http://www.99mediasector.com/install-qualcomm-hs-usb-qdloader-9008-install/
Click to expand...
Click to collapse
I couldn't install those drivers it says windows need 64 bit drivers
om_latex said:
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Click to expand...
Click to collapse
There is a major diff in vid and for me! he has working fastboot and i dont so i cant use EDL too but thanks for suggesting
Anantha47 said:
I couldn't install those drivers it says windows need 64 bit drivers
Click to expand...
Click to collapse
Ok, try these:
https://www.dropbox.com/s/a3i7aqkwjonkwmu/QDLoader HS-USB Driver.7z?dl=0
varben said:
Ok, try these:
https://www.dropbox.com/s/a3i7aqkwjonkwmu/QDLoader HS-USB Driver.7z?dl=0
Click to expand...
Click to collapse
Thank you for your continuous support mate but my device is not listed in either adb or fastboot commands , hence that the method suggested my on_Latex is not going to work :'(
Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
connect your mobile to pc using usb cable and try pressing volume down and power button( or just press all three vol+ ,vol- and powerbutton ) untill it gets to fastboot mode
at last you will go to fastboot
i tried the same thing when i was in the same situation it worked for me
let me know is it working for you or not
SrikanthMergu said:
connect your mobile to pc using usb cable and try pressing volume down and power button( or just press all three vol+ ,vol- and powerbutton ) untill it gets to fastboot mode
at last you will go to fastboot
i tried the same thing when i was in the same situation it worked for me
let me know is it working for you or not
Click to expand...
Click to collapse
That's the thing i cant get into fast boot! the screen turns on white mi logo appears and then goes black after i press vol down + power
This phone is given: IMEI.info: BAC-L21 Nova 2 Plus (VNS-L21). No Recovery, no OS, no fastboot. Volume dwn + pwr doesn't work, restarts, but only the Huawei logo comes in. The battery was drained so I couldn't put it into fastboot mode (no cable or cable). FRP Unlocked, Bootloader Locked. I have no idea about the previous system, this phone was brought to me to look at it. I am completely disoriented after a night's suffering. Any idea or new motherboard?
esvtaz said:
This phone is given: IMEI.info: BAC-L21 Nova 2 Plus (VNS-L21). No Recovery, no OS, no fastboot. Volume dwn + pwr doesn't work, restarts, but only the Huawei logo comes in. The battery was drained so I couldn't put it into fastboot mode (no cable or cable). FRP Unlocked, Bootloader Locked. I have no idea about the previous system, this phone was brought to me to look at it. I am completely disoriented after a night's suffering. Any idea or new motherboard?
Click to expand...
Click to collapse
Hello, wrong thread dude,
you should look for the huawei nova 2 plus thread.
BAC-L21 is not VNS-L21...
Regards
No, this is a p9 lite, but for some reason the IMEI number is not stimmering ... But since then, a little soldering, a little EDL mode and a small Linux reset helped ... Well the DC Phoenix subscription. Now fastboot comes in, I haven't tried to install it yet, I got tired ...
esvtaz said:
No, this is a p9 lite, but for some reason the IMEI number is not stimmering ... But since then, a little soldering, a little EDL mode and a small Linux reset helped ... Well the DC Phoenix subscription. Now fastboot comes in, I haven't tried to install it yet, I got tired ...
Click to expand...
Click to collapse
Ok,
Now i'm curious, after eventual unlock of the bootloader,
about which firmware and/or android 6/7 version you'll try to flash.
Where you will start ?
Cheers
Dadditz said:
Ok,
Now i'm curious, after eventual unlock of the bootloader,
about which firmware and/or android 6/7 version you'll try to flash.
Where you will start ?
Cheers
Click to expand...
Click to collapse
reinstallation was successful, I had to solder the motherboard, then with DC Phoenix I was able to lure the fastboot mode. Now everything is working well.
http://www.kepfeltoltes.eu/view.php?filename=488received_3956570810222.jpeg
http://www.kepfeltoltes.eu/view.php?filename=303received_4088737265569.png
http://www.kepfeltoltes.eu/view.php?filename=118received_3617785144339.jpeg
I know prt scr is cool, but I'm too lazy
Dadditz said:
Ok,
Now i'm curious, after eventual unlock of the bootloader,
about which firmware and/or android 6/7 version you'll try to flash.
Where you will start ?
Cheers
Click to expand...
Click to collapse
The System is VNS-L21 C432B381 Nougat 7.0
esvtaz said:
The System is VNS-L21 C432B381 Nougat 7.0
Click to expand...
Click to collapse
WOW, man, you're kind of a technician,
congratulations for giving new life to that device.
I think you could help some needy users here on forum.
Keep the good work
All the best
Dadditz said:
WOW, man, you're kind of a technician,
congratulations for giving new life to that device.
I think you could help some needy users here on forum.
Keep the good work
All the best
Click to expand...
Click to collapse
Thanks! If my time allows, I'll write a larger description of how I brought it together. Some people will definitely take advantage of it once ready.