I have flashed my phone recovery mode with Twrp official app then restarted the Bootloader with Rom toolbox app lite .. and then my phone didn't power up again . and refused ever single try to flash it with all the Rom on the internet . I went to authorization of Huawei and they said you will new a new board for the phone that will cost me the same as a new one ... what should i do.
fixed it by flashing every partition alone while the battery is off the phone
you useless ****ers
Related
Hello
I attempted to flash my Zte l2 with cwm recovery however i flashed a recovery which wasn't compatible with the phone. The recovery started installing then just got stuck in a loop. The phone refused to boot even after i reset it and kept going back to the loop. I then attempted to flash the phone with the stock rom which i downloaded from the website with sp flash tool however it kept saying it the scatter file wasn't supported. I have tried several scatter files and now my phone isnt even turning on at all. The phone is still recognized by my computer as it make a beep sound when plugged in and it is also still recognized by the SP flash tool. Is there any hope ? Can anyone provide me with a rom or scatter file which will work. Just bought the phone two days ago and it would be a shame if its dead weight..
Thank you
desrhodes said:
Hello
I attempted to flash my Zte l2 with cwm recovery however i flashed a recovery which wasn't compatible with the phone. The recovery started installing then just got stuck in a loop. The phone refused to boot even after i reset it and kept going back to the loop. I then attempted to flash the phone with the stock rom which i downloaded from the website with sp flash tool however it kept saying it the scatter file wasn't supported. I have tried several scatter files and now my phone isnt even turning on at all. The phone is still recognized by my computer as it make a beep sound when plugged in and it is also still recognized by the SP flash tool. Is there any hope ? Can anyone provide me with a rom or scatter file which will work. Just bought the phone two days ago and it would be a shame if its dead weight..
Thank you
Click to expand...
Click to collapse
Try to flash recovery(I uploaded mine for you using adb and fastboot commands
if it don't work try to flash boot(extract it from update package from ZTE support site) or update.zip
I'm not a robot
Funtast said:
Try to flash recovery(I uploaded mine for you using adb and fastboot commands
if it don't work try to flash boot(extract it from update package from ZTE support site) or update.zip
Click to expand...
Click to collapse
hi funtast
just to ask if your recovery stock or something better than default Chinese recovery also are you using a virgin branded ZTE blade l2 thanks in advance add I take time before I flash any new phone thanks again
desrhodes said:
Hello
I attempted to flash my Zte l2 with cwm recovery however i flashed a recovery which wasn't compatible with the phone. The recovery started installing then just got stuck in a loop. The phone refused to boot even after i reset it and kept going back to the loop. I then attempted to flash the phone with the stock rom which i downloaded from the website with sp flash tool however it kept saying it the scatter file wasn't supported. I have tried several scatter files and now my phone isnt even turning on at all. The phone is still recognized by my computer as it make a beep sound when plugged in and it is also still recognized by the SP flash tool. Is there any hope ? Can anyone provide me with a rom or scatter file which will work. Just bought the phone two days ago and it would be a shame if its dead weight..
Thank you
Click to expand...
Click to collapse
hi the best option that worked for me involved downloading the latest sp-flash tool and a copy of the best rom from needroms pick the one with the highest star rate start spflash click the scatter file from the rom you found on needroms make sure your mobile isn't connected at this point plug your usb cable in the pc side take the other end of the usb take your moble hold down your volume down key connect the usb then after a second your mobile will begin to flash and yor mobile will work you will also need to download the stock rom and reflash from zte and update your mobile the stock way as the rom you have from needroms is only used to get your phone operational but will not work with your sim unless the mobile was previously unlocked to all networks then you could just leave the needroms version on but if your sim doesn't work you will need to copy the correct stock rom from zte to your sd card once you have the mobile restored and reflash it using normal method it will reflash and your nasty virgin sim will work again hope this helps
MAXMICK69 said:
hi the best option that worked for me involved downloading the latest sp-flash tool and a copy of the best rom from needroms pick the one with the highest star rate start spflash click the scatter file from the rom you found on needroms make sure your mobile isn't connected at this point plug your usb cable in the pc side take the other end of the usb take your moble hold down your volume down key connect the usb then after a second your mobile will begin to flash and yor mobile will work you will also need to download the stock rom and reflash from zte and update your mobile the stock way as the rom you have from needroms is only used to get your phone operational but will not work with your sim unless the mobile was previously unlocked to all networks then you could just leave the needroms version on but if your sim doesn't work you will need to copy the correct stock rom from zte to your sd card once you have the mobile restored and reflash it using normal method it will reflash and your nasty virgin sim will work again hope this helps
Click to expand...
Click to collapse
PUNCTUATION!!!!!! This is illegible!
Hello,
i have a problem with my 1 week old yotaphone and hope you guys can help me to solve.
Let me say, this is my first android device. After a long time using iphones i saw this 2-displays concept and wanted to give it a try.
But now my problem and the way to:
The phone was brand new and first of all i charged it for a wohle night.
After that i put in the sim-card and started the phone and walked through the start-procedure with WLAN, Googleaccount etc.
Then the phone told me about an update and i started it over WLAN.
The phone was downloading, rebooting and shows me a white window "updating x of 127(?) Apps".
Somewhere in the middel the phone rebooted again and now its in a bootloop.
What is possible with the phone right now.
I can start the phone wit the bootloop (powerred byAndroid, then restart)
I can use "Power + Vol-" to bring it into downloading mode
When i use "Power + Vol+" nothing happend.
When i use "Vol+ + Vol-" nothing happend.
The akku of the phone is empty now and it only works with usb or power unit connected.
In bootloop or downloading mode it is not charging.
What i tried.
What i try:
I read many topics with bricked / bootlooped yotphones and how to flash or cache whipping.
i connected the phone to my pc and used yotoflasher with many different firmwares.
I used fastboot:
- flashed the system.ing with differnet sizes.
- tried different custom recovery.img from different threads here and from other sites.
Even a complete new image, moddified RU img doesn`t help.
The phone stays in bootloop.
Yes, it`s a warranty case, but before i start to strech my nerves by handling with the dealer and shipping
this phone back to china i will try everything else and hope you can help me out of this situation.
Thanks a lot
easyxx said:
Hello,
i have a problem with my 1 week old yotaphone and hope you guys can help me to solve.
Let me say, this is my first android device. After a long time using iphones i saw this 2-displays concept and wanted to give it a try.
But now my problem and the way to:
The phone was brand new and first of all i charged it for a wohle night.
After that i put in the sim-card and started the phone and walked through the start-procedure with WLAN, Googleaccount etc.
Then the phone told me about an update and i started it over WLAN.
The phone was downloading, rebooting and shows me a white window "updating x of 127(?) Apps".
Somewhere in the middel the phone rebooted again and now its in a bootloop.
What is possible with the phone right now.
I can start the phone wit the bootloop (powerred byAndroid, then restart)
I can use "Power + Vol-" to bring it into downloading mode
When i use "Power + Vol+" nothing happend.
When i use "Vol+ + Vol-" nothing happend.
The akku of the phone is empty now and it only works with usb or power unit connected.
In bootloop or downloading mode it is not charging.
What i tried.
What i try:
I read many topics with bricked / bootlooped yotphones and how to flash or cache whipping.
i connected the phone to my pc and used yotoflasher with many different firmwares.
I used fastboot:
- flashed the system.ing with differnet sizes.
- tried different custom recovery.img from different threads here and from other sites.
Even a complete new image, moddified RU img doesn`t help.
The phone stays in bootloop.
Yes, it`s a warranty case, but before i start to strech my nerves by handling with the dealer and shipping
this phone back to china i will try everything else and hope you can help me out of this situation.
Thanks a lot
Click to expand...
Click to collapse
Mine too,stuck in bootloop. I also tried the fastboot and it said waiting device.
kophyo07 said:
Mine too,stuck in bootloop. I also tried the fastboot and it said waiting device.
Click to expand...
Click to collapse
If your phone displays Downloading... and fastboot keeps saying waiting for device then there is something wrong with the installed ADB driver. Check some of the posts in this forum like this one on how to fix this. http://forum.xda-developers.com/yotaphone-one/help/yotaphone-2-yd-206-china-flash-firmware-t3306797/post69311402#post69311402
Strange that you had an OTA (Over The Air update). You didn't do anything between the SIM/Google registration and OTA ?
Normally there are no OTAs allowed on yd206 phones bought from China/HK , where did you buy it ? Chinese retailers have their own firmware that they put on phones , for me , maybe you had bad firmware installed.
The warranty of your phone is voided if you flash yotaphones bought from China and HK .
When you use yotaflasher do you get error message or "waiting for device" ?
To flash the Yotaphone , it should be in developer mode , but you couldn't put it in this mode because it first did the OTA that started your bootloop. Android apps are updated like that ("installing x of 127") when it gets updated to lollipop. Normally the OTA should have worked OK. Did you allow enough time at the Yotaphone logo after the first reboot ? It stays on this logo for 5 minutes before starting. I made this mistake.
The OTA started just after you set up Google etc ?
If so, normal yotaflashing will never work, but at least you havent broken the warranty . The thing we need to know is what exactly happened when you tried to flash , what errors messages appeared ?
If you did not put the phone in developer mode, then you cannot easily flash the phone, so your best possibility is to return the phone. Normally you can contact the seller by chat or email . Some are very good in exchanging.
It IS possible to flash your phone using fastboot, but I would not personally attempt it and you would lose your warranty . You need rootkits, SDK toolkits, universal drivers and images. Google "bootloop without USB debugging".
When I flashed my yd206 , (after many attempts) I flashed my yd206 to yd201 Russian KitKat ROM first and then did an OTA to lollipop.
hi guys this is my first post about le pro 3 phone ( x720 )
Before more than one year i was install custom rom ( panaroid android rom ) and it is the best for me iam installed it via official TWRP and rooted it . but suddenly has loop and i cannot open anything just fastboot screen and when i charging it just i see red light , i tried to flash Qfile via flashone 2.0 tool ( i am installed all drivers needed ), flashed is successful but the problem loop is continue , after that iam going to local market ( in iraq ) they didn't have maintenance for leeco phone but i asked him to remove battery and return it , after doing so, he charged the phone, showed the charge rate and battery, became the battery percentage 55 % and I turned it on, but the problem continued , i flashed qfile again but nothing happened , I left the phone for months, then I gave it to a friend from China where we work together in the same company in Iraq, he took the phone to a maintenance center in China and they repaired it ( they find hardware problem and the replaced element or some thing like that ), My friend gave me the phone works with emui 5.8 and he buy spare battery and he told me that no need to replace battery as maintenance center say , after that just i install twrp and flash emui 6.0.0.30 and make root for it , the phone work fine for one month but also suddenly the system freeze and reboot loop , i tried to inter recovery but the screen black and white lines appeared as in previous problem .
what should i do dear friends
No body here ?
Hello, Dear XDA-Developers.
I was trying some custom ROMs but when I installed Viper4Android and flashed it using Magisk the phone stucks on boot
However I have another problem, I found out that the internal storage of my phone got too small after upgrading into another version of Android, so I wanted to get back to Android 5 stock firmware completed to format the internal storage and not partitioning it as I thought so I tried to flash it in TWRP recovery but sadly after that I bricked the bootloader and the recovery. Next, I decided to flash a board image ALE-L02&L21&L23_MAA001077_Board_Software_general_05021SJN using IMAGE Download Software - IDTML01Ver1001, Still, the process got interrupted maybe because the phone was restarting itself and now I'm getting a screen that shows error after showing Huawei Ascend logo. Is there any chance to fix this dead phone but consider that my pc is no longer detecting the driver that I used to flash the board image, and I can't even turn off the phone now except if I let the battery dies.
Notice: I don't dare to use test points if there is no other choice how much it usually costs to fix it?
Hii!! I have a realme 2 pro rmx1801. I was on real.e ui v1.0. I somehow managed to unlock the bootloader by fastboot. Then i tried to flash twrp recovery. My phone was stucking on the white realme logo and was again automatically booting normally into system. I tried to flash recovery 10-11 times but the same thing happening. Then i searched for it and found a guy who was saying that after flashing recovery, I will have to flash a file named " boot+patched+magisk". Then i did the same but found that my phone now niether was able to boot into recovery nor into system. It was just showing white realme logo, then turned off again, again tried to start and again turned off... the process repeated again and again until i booted it into fastboot. I got afraid and thought that after relocking bootloader it would return to normal but when i locked it again it just showed---- " the current boot image (boot/recovery) has been destroyed and can not boot." I took it to a local repair shop as there is no official realme service centere in my city. He said it would take 3 days to repair it, he told that he will have to download files. I left it there and then the third day called him. He said that he tried to flash but he was not able to repair it. He also told that the phone booted up one time upto the home screen but again reached to the same boot image destroyed message automaticall. I told him that i want my phone repaired and he asked for 2 more days. I allowed. It is about 21 days and he is saying the same thing again and again. Is my phone dead? He is saying that the chances of my phone get reapaired are very low. He said i have also tried ufi but no success. Is he lying? I have not seen my phone from about 21 days, as it is covid-19 spread. We are only talking on phone. Pls tell that can my phone be reapired?
Edit: I bring my phone back from him today. He said that he was not able to repair it. When i gave the device to him it was turning on upto realme and then showing boot image destroyed. But now it is not even turning on. What should i do now. Is this a mistake of mine or he is responsible?
Have you locked Bootloader?
If yes then probably you must flash using flash tool.
(Which may work or not)
If you haven't locked Bootloader then easily flash stock recovery,then flash stock rom
For guide go to YouTube then search your title
The current boot recovery destroyed and cannot boot.
androport said:
Have you locked Bootloader?
If yes then probably you must flash using flash tool.
(Which may work or not)
If you haven't locked Bootloader then easily flash stock recovery,then flash stock rom
For guide go to YouTube then search your title
The current boot recovery destroyed and cannot boot.
Click to expand...
Click to collapse
My bootloader is locked. But i thing ufi should work as it directly flashes emmc of device.
Kartikkala said:
My bootloader is locked. But i thing ufi should work as it directly flashes emmc of device.
Click to expand...
Click to collapse
Will msm work? the guy which is repairing my phone is telling that the device turned on for some time but it went to the same condition automatically again. I am thinking is this even possible? Well i tried connecting it to msm and it showed up there on msm as com4 and in devices as qualcomm hs qdloader.
How did you unlock bootloader ?? Can you help me with that please ?? a
Kartikkala said:
Hii!! I have a realme 2 pro rmx1801. I was on real.e ui v1.0. I somehow managed to unlock the bootloader by fastboot. Then i tried to flash twrp recovery. My phone was stucking on the white realme logo and was again automatically booting normally into system. I tried to flash recovery 10-11 times but the same thing happening. Then i searched for it and found a guy who was saying that after flashing recovery, I will have to flash a file named " boot+patched+magisk". Then i did the same but found that my phone now niether was able to boot into recovery nor into system. It was just showing white realme logo, then turned off again, again tried to start and again turned off... the process repeated again and again until i booted it into fastboot. I got afraid and thought that after relocking bootloader it would return to normal but when i locked it again it just showed---- " the current boot image (boot/recovery) has been destroyed and can not boot." I took it to a local repair shop as there is no official realme service centere in my city. He said it would take 3 days to repair it, he told that he will have to download files. I left it there and then the third day called him. He said that he tried to flash but he was not able to repair it. He also told that the phone booted up one time upto the home screen but again reached to the same boot image destroyed message automaticall. I told him that i want my phone repaired and he asked for 2 more days. I allowed. It is about 21 days and he is saying the same thing again and again. Is my phone dead? He is saying that the chances of my phone get reapaired are very low. He said i have also tried ufi but no success. Is he lying? I have not seen my phone from about 21 days, as it is covid-19 spread. We are only talking on phone. Pls tell that can my phone be reapired?
Edit: I bring my phone back from him today. He said that he was not able to repair it. When i gave the device to him it was turning on upto realme and then showing boot image destroyed. But now it is not even turning on. What should i do now. Is this a mistake of mine or he is responsible?
Click to expand...
Click to collapse
I am running realme ui v1 f.11.. In depth test app is not working.help me please..
Samanto70 said:
I am running realme ui v1 f.11.. In depth test app is not working.help me please..
Click to expand...
Click to collapse
Go in below thread and check #2 post
https://forum.xda-developers.com/realme-2-pro/help/bootloader-unlock-problem-t4167125
I already posted how to unlock bootloader on realme ui
Samanto70 said:
I am running realme ui v1 f.11.. In depth test app is not working.help me please..
Click to expand...
Click to collapse
Doesn't work on realme ui
Samanto70 said:
I am running realme ui v1 f.11.. In depth test app is not working.help me please..
Click to expand...
Click to collapse
You are lucky. Dont try to unlock ur boot loader forcefully. Or you will perish too. You can unlock it but any custom recovery is not yet launched for realme ui. If u want to still unlock it, download bugjaegar app form playstore on another device, turn on usb debug on ur realme 2 pro and the another device too , connect ur device and open bugjaegar app on ur other device, it will ask for allowing bugjaegar to debug via usb. Allow it, a prompt will pop up on ur realme 2 pro. Allow it. If u are not asked, click on reboot bootloader on bugjaegar app, definitely the prompt will pop up on your realme 2 pro. Click allow and u are good to go. Make sure that u turn on oem unlock too.