Hi !!
First, i tried to flash Resurrection Remix ROM but i stucked in BOOTLOOP
And then i flashed latest stock rom Version: V9.5.9.0.ODHMIFA using mi flash but i had a problem that when i wan to connect to WiFi it will say save then disable but never connect so i flashed the stock rom again and i still getting the WiFi problem and i flashed the rom for the third time and i got stuck in weird BOOTLOOP, the device will start normally but after few minutes it will restart over and over and over, so what should i do ? can anyone help me ?
that's all and i'm sorry if my english is bad
SooMi22 said:
Hi !!
First, i tried to flash Resurrection Remix ROM but i stucked in BOOTLOOP
And then i flashed latest stock rom Version: V9.5.9.0.ODHMIFA using mi flash but i had a problem that when i wan to connect to WiFi it will say save then disable but never connect so i flashed the stock rom again and i still getting the WiFi problem and i flashed the rom for the third time and i got stuck in weird BOOTLOOP, the device will start normally but after few minutes it will restart over and over and over, so what should i do ? can anyone help me ?
that's all and i'm sorry if my english is bad
Click to expand...
Click to collapse
if u want to use custom rom just follow proper steps and it will install.
-unlock bootloader (which i assume u already have)
-fastboot boot latest twrp
-do a full wipe and reboot to bootloader.
-again fastboot boot the latest twrp
-now copy rom,gapps,magisk(mandatory) and twrp installer(optional)
-install rom and twrp installer only
-reboot to booatloader and fastboot boot twrp again or if u installed twrp installer just reboot to recovery.
-now flash magisk and gapps
-reboot system
By mistake if u flashed factory.bat then read this : https://forum.xda-developers.com/mi-a1/how-to/guide-how-to-restore-imei-permanently-t3759190
if your phone is rebooting after every 60 sec then u most probably corrupted /persist. Don't worry custom roms will work without any problem as they don't touch persist.
did you by chance used flash_factory.bat in mi flash tool ?
anshu945 said:
if u want to use custom rom just follow proper steps and it will install.
-unlock bootloader (which i assume u already have)
-fastboot boot latest twrp
-do a full wipe and reboot to bootloader.
-again fastboot boot the latest twrp
-now copy rom,gapps,magisk(mandatory) and twrp installer(optional)
-install rom and twrp installer only
-reboot to booatloader and fastboot boot twrp again or if u installed twrp installer just reboot to recovery.
-now flash magisk and gapps
-reboot system
also if u want to use stock rom read this : https://forum.xda-developers.com/mi-a1/how-to/guide-how-to-restore-imei-permanently-t3759190
if your phone is rebooting after every 60 sec then u most probably corrupted /persist. Don't worry custom roms will work without any problem as they don't touch persist.
also did you by chance used flash_factory.bat in mi flash tool ?
Click to expand...
Click to collapse
thank you for help
i will try to use custom rom and i hope it will work
and i did use flash_all_lock_crc.bat in mi flash tool then i'm start getting the restart problem with unread sim card
use flash_all_lock.bat only or flash all except storage.bat or flash_all.bat .except these nothing else.
flash custom rom or flash_all_lock.bat in mi flash tool (it will work work most probably).
anshu945 said:
if u want to use custom rom just follow proper steps and it will install.
-unlock bootloader (which i assume u already have)
-fastboot boot latest twrp
-do a full wipe and reboot to bootloader.
-again fastboot boot the latest twrp
-now copy rom,gapps,magisk(mandatory) and twrp installer(optional)
-install rom and twrp installer only
-reboot to booatloader and fastboot boot twrp again or if u installed twrp installer just reboot to recovery.
-now flash magisk and gapps
-reboot system
also if u want to use stock rom read this : https://forum.xda-developers.com/mi-a1/how-to/guide-how-to-restore-imei-permanently-t3759190
if your phone is rebooting after every 60 sec then u most probably corrupted /persist. Don't worry custom roms will work without any problem as they don't touch persist.
also did you by chance used flash_factory.bat in mi flash tool ?
Click to expand...
Click to collapse
problem solved !!
first, i tried to flash custom rom with your steps but it didn't work for me, getting stock in boot logo
then i tried the solution in thread u give me, i flashed tissot_images_7.8.23_7.1 via mi flash tool then i restored restore persist partition and everything work great !!
wifi and sim card works fine, thanks man for your help :good:
great, just keep in mind not to flash factory.bat or any other bat files except the three i mentioned above.
anshu945 said:
great, just keep in mind not to flash factory.bat or any other bat files except the three i mentioned above.
Click to expand...
Click to collapse
ok i will, thanks again
anshu945 said:
great, just keep in mind not to flash factory.bat or any other bat files except the three i mentioned above.
Click to expand...
Click to collapse
sorry for bothering, but now i have 'no service' issue, the phone read the sim but it shows that i have no service
do u have any idea to fix this ?
SooMi22 said:
sorry for bothering, but now i have 'no service' issue, the phone read the sim but it shows that i have no service
do u have any idea to fix this ?
Click to expand...
Click to collapse
now to recover imei follow the same guide above, if u have trouble editing qcn let me know.
hi, i need some help with reflashing the stock rom
its always stuck on pushing the system neither manual nor using mi flash.
here i attached the log file, wish it help in some way.
littlecrap said:
hi, i need some help with reflashing the stock rom
its always stuck on pushing the system neither manual nor using mi flash.
here i attached the log file, wish it help in some way.
Click to expand...
Click to collapse
you followed this guide?
YayJohn said:
you followed this guide?
Click to expand...
Click to collapse
no i dont follow the guide you mentioned, i dont know whats wrong but its always stuck in writing system b
the log says its ok but no further action.
littlecrap said:
no i dont follow the guide you mentioned, i dont know whats wrong but its always stuck in writing system b
the log says its ok but no further action.
Click to expand...
Click to collapse
You can try following the guide I sent u but if it doesn't work I can't help you
Related
Hey sombody plz help me to get through this,I installed the OTA then I unlocked bootlocker and installed the custom recovery twrp 2.8.7v2 ....then I tried to install the SuperSU....but after flashed it through twrp,I was stucked at "Warning Bootlocker Unlocked" screen for like 15 min,so then I tried to clear cache and then reboot....But that also not help,Then i tried format all the data and tried to to strt in factory mode.but still stucked at same screen.Now what should I do to get into the phone ?PLz ....its urgent
Well the thing you could do is factory resetting via TWRP or you could download a new ROM like CM 12.1 that you can find in the original android developer section and flash it with TWRP, your phone would boot up now. Keep in mind that you will lose everything.
anks095 said:
Hey sombody plz help me to get through this,I installed the OTA then I unlocked bootlocker and installed the custom recovery twrp 2.8.7v2 ....then I tried to install the SuperSU....but after flashed it through twrp,I was stucked at "Warning Bootlocker Unlocked" screen for like 15 min,so then I tried to clear cache and then reboot....But that also not help,Then i tried format all the data and tried to to strt in factory mode.but still stucked at same screen.Now what should I do to get into the phone ?PLz ....its urgent
Click to expand...
Click to collapse
The same happend to me, you must have installed the wrong SU version, just reflash stock firmware via fastboot and reinstall OTA, then if u wanna root use SuperSU v2.61, hope it helps.
Just flashed the CM12.1 through twrp ,problem is solved in a way.
anks095 said:
Just flashed the CM12.1 through twrp ,problem is solved in a way.
Click to expand...
Click to collapse
facing the same problem...... is flashing CM12.1 gonna solve it ?
praveen1618 said:
facing the same problem...... is flashing CM12.1 gonna solve it ?
Click to expand...
Click to collapse
It will but you should have unlocked bootloader.
praveen1618 said:
facing the same problem...... is flashing CM12.1 gonna solve it ?
Click to expand...
Click to collapse
unlock ur boot-loader first ,then flash cm through fastboot or if u have twrp then copy the cm zip in the sd card and then flash it through twrp.But remember to wipe the system,cache,dalvik cache and data.problem should be gone.
anks095 said:
unlock ur boot-loader first ,then flash cm through fastboot or if u have twrp then copy the cm zip in the sd card and then flash it through twrp.But remember to wipe the system,cache,dalvik cache and data.problem should be gone.
Click to expand...
Click to collapse
Sorry Noob question- when should I wipe the system,cache,dalvik cache and data ?? Before flashing cm 12.1??
And I am currently on mm rooted. And cm12.1 is based on lollypop, will there be any problem if I flash cm12.1?
bablu048 said:
Sorry Noob question- when should I wipe the system,cache,dalvik cache and data ?? Before flashing cm 12.1??
And I am currently on mm rooted. And cm12.1 is based on lollypop, will there be any problem if I flash cm12.1?
Click to expand...
Click to collapse
It will work fine.Backup your current system using twrp and then flash cm12.1.
bablu048 said:
Sorry Noob question- when should I wipe the system,cache,dalvik cache and data ?? Before flashing cm 12.1??
And I am currently on mm rooted. And cm12.1 is based on lollypop, will there be any problem if I flash cm12.1?
Click to expand...
Click to collapse
hope fully there would not be any problem....but in case of going wrong with something you should make a back up with twrp to go back to previous build,and yes ,before flashing any rom, you should wipe your cache ,dalvik cache and data......and system if u need...depends upon you
about moto x stucked while rooting
anks095 said:
Just flashed the CM12.1 through twrp ,problem is solved in a way.
Click to expand...
Click to collapse
i was trying to root moto x play i unlocked bootloader but when i tried to root my phone stuked in WARNING BOOTLOADER UNLOCKED.......... I TRIED WIPE ALL DATA FROM RECOVERY.... i tried some research someone said try to flash cm12.1 with twrp but i dont know hot to do this..... my mob is not connecting with pc plz help me guyz plz contect me at my gmail [email protected] its very urgent......plz tell me what to do step by step
sonubisht said:
i was trying to root moto x play i unlocked bootloader but when i tried to root my phone stuked in WARNING BOOTLOADER UNLOCKED.......... I TRIED WIPE ALL DATA FROM RECOVERY.... i tried some research someone said try to flash cm12.1 with twrp but i dont know hot to do this..... my mob is not connecting with pc plz help me guyz plz contect me at my gmail [email protected] its very urgent......plz tell me what to do step by step
Click to expand...
Click to collapse
first of all, which super su zip u r trying to flash ???? only this super su - "SuperSU-v2.62-3-20151211162651.zip" works on MXP...... after unlocking the boot loader u need to flash first twrp custom recovery...then entering into twrp interface,format the whole internal memory (I m sorry,u have to do that,no other way is possible)...... then put cm12 zip which u want to flash in sd card then flash the zip through twrp....... I guess this way your problem would be solved.....
If u flashed the correct mentioned supersu you should be fine.It happened 3 times also to me.I just press power continuously to power off and then it boots normally.
Please in case of SuperSU do not use 2.62-3 anymore, use 2.79SR3. Both are supposed to work, but 2.79SR3 is newer and has some bugfixes.
Note: The release 2.79 will not work, the detection fix to install systemless for all Moto devices is only integrated in 2.79SR3. 2.62-3 does no detection, it always installs systemless.
that was rom problm
mausv said:
Well the thing you could do is factory resetting via TWRP or you could download a new ROM like CM 12.1 that you can find in the original android developer section and flash it with TWRP, your phone would boot up now. Keep in mind that you will lose everything.
Click to expand...
Click to collapse
that was a rom problem
my phone is not turning on pls help after updating one ota of marshmallow security patch 1 jan
anks095 said:
Just flashed the CM12.1 through twrp ,problem is solved in a way.
Click to expand...
Click to collapse
Is cm12.1 support direct volte calling,.? Or any other custom rom which support volte calls???.
2-3 days ago I successfully rooted my Moto E3 power by unlocking bootloader and installing twrp recovery. Yesterday I installed Lineage 14.1 custom Rom (7.1.2) for Moto E3 power from here
https://forum.xda-developers.com/moto-e3/development/rom-lineage-14-1-moto-e3-power-t3610435
The Rom installation was successful. Phone was working fine. But there was some minor lag and screen was appearing to be yellowish. Hence I decided to Factory reset the phone. I tried to reset it from phone settings. The phone switched off and turned on into twrp recovery mode. Then I tried to factory reset through twrp mode. But it is always booting into twrp recovery. I wiped all cache and data including system data and flashed the above Rom again. But whenever I try to system reboot, it is not booting normally, but always going into twrp mode.
Please provide solution for the issue with appropriate information and links.
Thanks.
Beauause u delete the all ROM
For Reset phone -: not need to wipe system and boot.. Only do a factory reset
Rupi Singh said:
Beauause u delete the all ROM
For Reset phone -: not need to wipe system and boot.. Only do a factory reset
Click to expand...
Click to collapse
Yes, I know that
I had done just factory reset earlier, but after that it kept on booting into recovery mode everytime I reboot the phone. Then I cleared system data to flash the ROM again. I should have done factory reset through recovery mode rather than from phone settings.
Flash a sp flash ROM without format... And again try twrp and custom ROM
Rupi Singh said:
Flash a sp flash ROM without format... And again try twrp and custom ROM
Click to expand...
Click to collapse
yes, already did same thing today. it worked fine and i successfully installed stock rom again.
sid100 said:
yes, already did same thing today. it worked fine and i successfully installed stock rom again.
Click to expand...
Click to collapse
Hi,
Would be great if you can share step by step process on how you recovered. Am also facing the same issue. Have factory reseted my phone and now its booting only to TWRP recovery mode. Am on Mac. Can try to get a Windows Laptop if required.
Awaiting you response.
Thanks in advance!
question?
Rupi Singh said:
Flash a sp flash ROM without format... And again try twrp and custom ROM
Click to expand...
Click to collapse
can you elaborate this ?
What do you mean by Sp flash ROM.?
Do it mean stock rom?
or i have to install sp flash tool in my computer then install stock rom?
if i have twrp install if than i can use it to install stock rom?
Please reply fast.
my phone is as good as dead now.
Ansh Vijay said:
can you elaborate this ?
What do you mean by Sp flash ROM.?
Do it mean stock rom?
or i have to install sp flash tool in my computer then install stock rom?
if i have twrp install if than i can use it to install stock rom?
Please reply fast.
my phone is as good as dead now.
Click to expand...
Click to collapse
I have got the same problem bro. If I can recover from the situation somehow, I'll update it here.
Have an update!
Ben_android enthusiast said:
I have got the same problem bro. If I can recover from the situation somehow, I'll update it here.
Click to expand...
Click to collapse
Update: Don't know if you still need the solution, but I am gonna share my info. Although as the phone you were talking about must be Moto E3, my phone is Lenovo K3 Note, but the processor should basically be the same, as both runs on Mediatek processors. And for the same reason, they both would use the SP Flash Tool to flash a ROM. You'll need to download the Stock ROM file for your moto E3, and flash it through SP flash tool installed on your computer. You'll get the tutorials on youtube. When the stock ROM is flashed, the phone will start with your stock ROM. I have had my phone do the same and it is fine now.
Ben_android enthusiast said:
I have got the same problem bro. If I can recover from the situation somehow, I'll update it here.
Click to expand...
Click to collapse
Yes i recovered from the situation.
You just had to download the sp flash tool and the stock ROM for your respective phone, and flash it . Remember for the above problem you just have to use the "download only" option in your sp flash tool and it will work. if you use "format all+download"
you will left by losing imei number of your phone and then you have to follow other procedure to fix that. but according to me your phone will start by choosing download only.
I am stuck at encryption failed when I flash stock oreo rom. I tried formatting data using twrp and flashed no encryption file as well but nothing works.:crying::crying::crying:
I just want to use the stock oreo rom again with root.
Pls help:crying:
Which ROM did you try and flash / install?
Try upgrading your TWRP to the latest version too.
jl10101 said:
Which ROM did you try and flash / install?
Try upgrading your TWRP to the latest version too.
Click to expand...
Click to collapse
I used partition dl mode to flash the stock oreo rom over 7.0 to keep the root. Then i flashed custom kernal for stock 8.0 but it didnt work. I have done the same procedure before and it has worked like a charm. But it keeps on giving the encrytion error when i try it now
Deadmeat03 said:
I used partition dl mode to flash the stock oreo rom over 7.0 to keep the root. Then i flashed custom kernal for stock 8.0 but it didnt work. I have done the same procedure before and it has worked like a charm. But it keeps on giving the encrytion error when i try it now
Click to expand...
Click to collapse
Odd. If I had to guess anything, it would be that not all the partitions were flashed when going from Nougat to Oreo.
I once flash a Nougat ROM from an Oreo ROM and I had the same encryption issue and lost everything.
That was the last time I would trust myself again and not do a backup.
Flash stock recovery from KDZ through patched LGUP & do a factory reset .
After stock recovery completes the wipe do a battery pull, flash TWRP via fastboot, format data, flash Kernel & Magisk & you should be back on track...
Prowler_gr said:
Flash stock recovery from KDZ through patched LGUP & do a factory reset .
After stock recovery completes the wipe do a battery pull, flash TWRP via fastboot, format data, flash Kernel & Magisk & you should be back on track...
Click to expand...
Click to collapse
I tried that as well. With stock recovery is says data is corrupted and doesn't do anything. I think it might be a problem with patched lg up because when i use normal lg up to flash oreo it works. But I cant root then.
I would try changing to 3.2.3-4 TWRP and then trying the procedure again. It seems that the 3.3.0 TWRP does not decrypt properly sometimes.
In the same boat as OP
scottyrick said:
I would try changing to 3.2.3-4 TWRP and then trying the procedure again. It seems that the 3.3.0 TWRP does not decrypt properly sometimes.
Click to expand...
Click to collapse
Hi
Looking for a way to keep TWRP and root ... any help appreciated
I've got a US996 with the same issue as the op. I have the latest TWRP 3.3.1-0. The phone was working fine until I upgraded twrp but I might have done a mistake resetting phone outside of twrp.
I can still get back into twrp but I haven't been able to install zip files without getting that decryption unsuccessful message when booting to system.
When getting back into TWRP using hardware buttons sometimes there is a prompt asking "keep system read only?" which I never chose and swipe to allow modification. I think this happens after
I pull the battery after getting the decryption unsuccessful message. There is a reset system that I could chose under the decryption unsuccessful message but I'm assuming that will make me lose twrp
...but if my phone is a us996 and is still
unlocked, would it matter if I did select it? Wouldn't I be able to reinstall twrp using adb again on a computer after Oreo is reinstalled?
To do Prowler_gr's suggestion which guide do I follow (sounds like I should do the second option)
"Flash stock recovery from KDZ through patched LGUP & do a factory reset .
After stock recovery completes the wipe do a battery pull, flash TWRP via fastboot, format data, flash Kernel & Magisk & you should be back on track... "
1-[GUIDE][UNBRICK] Patch LGUP to unlock features & unbrick V20 (Variant mismatch fix) to use lgup
or this guide
2-Ultimate guide to unbrick LG V20(Only Variants with .KDZ)[No OS Firmware Update Loop]
Thank you for any guidance on this...
There is a reset system that I could chose under the decryption unsuccessful message but I'm assuming that will make me lose twrp
Click to expand...
Click to collapse
Don't blame me if this goes wrong but I'm pretty much 100% certain that you mush press the rest button. This has happened to me a few times I'm sure. You won't loose twrp. Whatever resetting goes on in the background I don't think it's an actual Factory Reset.
Edit: Just to be clear you taking about a white screen with I think in dark blue or black text ENCRYPTION UNSUCCESSFUL and something like "reset phone" option directly under it, on the upper half of the screen?
Hi ezzony
Yes you are thinking of the right decryption unsuccessful page. I get it when booting to system
after installing Oreo and magisk 19 and having wiped everything (format data too). I will get the exact wording of it tonight
Thanks!
downgrade twrp i has same prob twrp 3.3.1 gives issues
ghet2rockuu said:
downgrade twrp i has same prob twrp 3.3.1 gives issues
Click to expand...
Click to collapse
Hi ghet2rockuu
I downgraded twrp and that got it working Thank You! see also Phoenix591 thread [Recovery][Unofficial for the moment]TWRP 3.3.1-0 : 2019-05-17 #625
Thank You !
Hi guys. I accidentaly wiped System and now my phone has no rom on it. I tried to install stock rom from https://xiaomifirmwareupdater.com via Fastboot but it won't install because of anti rollback. My Bootloader is unlocked and i have TWRP, can anybody please help me... THX!
If you can boot to TWRP, try to install a MIUI recovery rom: https://mifirm.net/model/davinci.ttt or a custom rom.
Or, try to flash the images with CMD/Terminal.
Schnedi said:
If you can boot to TWRP, try to install a MIUI recovery rom: https://mifirm.net/model/davinci.ttt or a custom rom.
Or, try to flash the images with CMD/Terminal.
Click to expand...
Click to collapse
Thx. for the reply. I flash stock rom with CMD but it boot loops ..then flashed again with TWRP but after reboot it goes back to recovery. Any ideas?
I forgot this two lines
"fastboot erase userdata"
"fastboot flash userdata userdata.img"
Now it boots ..Thank a lot!!!
Alin CG said:
I forgot this two lines
"fastboot erase userdata"
"fastboot flash userdata userdata.img"
Now it boots ..Thank a lot!!!
Click to expand...
Click to collapse
Dear Alin
Could you describe to us the steps you did to succesfully reflash your device?
In the future in case that happend again... its easy, if you still can enter to TWRP just connect to the PC and transfer any flasheable ROM... Flash it and thats it
mauriciocardoso said:
Dear Alin
Could you describe to us the steps you did to succesfully reflash your device?
Click to expand...
Click to collapse
Will post when i get back from work.
Hucast_DL said:
In the future in case that happend again... its easy, if you still can enter to TWRP just connect to the PC and transfer any flasheable ROM... Flash it and thats it
Click to expand...
Click to collapse
The TWRP method didn't work because i wiped everything : system, vendor. etc... my phone had nothing on it, not a single file of the original firmware. When i flashed the rom with TWRP it always booted to TWRP and not the rom , even if the rom was installed successfully. Even when i tried to flash with FlashTool i got the anti rollback error. The CMD/Terminal flash worked for me.
Alin CG said:
The TWRP method didn't work because i wiped everything : system, vendor. etc... my phone had nothing on it, not a single file of the original firmware. When i flashed the rom with TWRP it always booted to TWRP and not the rom , even if the rom was installed successfully. Even when i tried to flash with FlashTool i got the anti rollback error. The CMD/Terminal flash worked for me.
Click to expand...
Click to collapse
For example you flash xiaomi.eu already included all you said I think the only step you didnt was wipe data (tipyng yes)
mauriciocardoso said:
Dear Alin
Could you describe to us the steps you did to succesfully reflash your device?
Click to expand...
Click to collapse
Download the fastboot rom from first link and unzip it. It should have 6gb then folow the steps from second link.
https://xiaomifirmwareupdater.com/archive/miui/davinci/
https://www.xiaomigeek.com/flash-miui-fastboot-rom-using-command.html
Tried flashing the rom with miflash official tool?
Sorry for my wrong English
I am currently on stock miui 10.3.6.0 .I have unlocked the bootloader,Installed TWRP recovery & rooted my device with magisk.Now i am unable to get the latest miui 10.3.7.0 update.!
Is there any way in whick i can update my device to latest miui rom?
If there please help me.
I am not finding any link which is helping me.
I downloaded latest miui recovery rom from here but unfortunately there is an error i.e flash all.bat is missing in xiaomiflashtool.Tried to flash the same rom through TWRP but there again is an error i.e compatibility zip missing.
a download link to miui 10.3.7.0 fastboot rom will be appreciated.please help
Thanks in advance
Look here: https://forum.xda-developers.com/redmi-note-7/help/ota-update-unlocked-rooted-device-t3963409/page2
Download the full recovery rom from here: https://xiaomifirmwareupdater.com/miui/
darhma said:
Look here: https://forum.xda-developers.com/redmi-note-7/help/ota-update-unlocked-rooted-device-t3963409/page2
Download the full recovery rom from here: https://xiaomifirmwareupdater.com/miui/
Click to expand...
Click to collapse
Thanks very much it helped. I have downloaded fastboot Rom and flashed it. I have another big issue,after flashing 10.3.7.0 update I got miui stock recovery Installed so I again.
Flashed twrp from fastboot.
Then format data.
Flash magisk.
And reboot.
But after successful reboot and setup when I choose to use pattern or pin or password as authentication.The device is not recognizing my correct pin or password.It says password incorrect. Please help I am not finding any solution for this.
What is the correct pattern to install recovery to successful magisk install.
Thanks
ChandrakantBelell said:
Thanks very much it helped. I have downloaded fastboot Rom and flashed it. I have another big issue,after flashing 10.3.7.0 update I got miui stock recovery Installed so I again.
Flashed twrp from fastboot.
Then format data.
Flash magisk.
And reboot.
But after successful reboot and setup when I choose to use pattern or pin or password as authentication.The device is not recognizing my correct pin or password.It says password incorrect. Please help I am not finding any solution for this.
What is the correct pattern to install recovery to successful magisk install.
Thanks
Click to expand...
Click to collapse
Why did you used fastboot rom instead of the recovery rom? This way you didn't update the rom but reinstalled it. So I think that the only way to get rid of the password request is to format data partition from recovery and then install magisk. Next time you have to update you have to download the RECOVERY rom, dirty flash it and flash magisk before rebooting to system.
darhma said:
Why did you used fastboot rom instead of the recovery rom? This way you didn't update the rom but reinstalled it. So I think that the only way to get rid of the password request is to format data partition from recovery and then install magisk. Next time you have to update you have to download the RECOVERY rom, dirty flash it and flash magisk before rebooting to system.
Click to expand...
Click to collapse
Ok thanku.So now i have to flash TWRP recovery.then boot into recovery wipe data then install magisk right? Is there any other zip to flash? What is vm verity zip? I have to flash that also?
ChandrakantBelell said:
Ok thanku.So now i have to flash TWRP recovery.then boot into recovery wipe data then install magisk right? Is there any other zip to flash? What is vm verity zip? I have to flash that also?
Click to expand...
Click to collapse
You have to flash twrp reboot to recovery if it asks for a password format data then install magisk. Vbmeta is needed just when you change rom from miui to aosp, so in this case you don't need it