Database Users

Will an S7 Edge (T-Mobile) work on Verizon?

Hello all,
I want to switch to Verizon but I don't have a verizon sim to test my phone, I just got it unlocked through the unlock app. I've also read this post,
https://forum.xda-developers.com/tm...izon-galaxy-s7-edge-t-mobile-network-t3399618
but there is no confirmation if he found a solution.
any feed back would help.

Well i live in Mexico, but i own a galaxy s7 edge from tmobile and to try nougat i installed first the Verizon version, and it work well, the only issue was to setting the data configuration, now i use the At&t nougat and everything still even more perfect (the verizon nougat have a lot of little bugs)

bounddyy said:
Hello all,
I want to switch to Verizon but I don't have a verizon sim to test my phone, I just got it unlocked through the unlock app. I've also read this post,
https://forum.xda-developers.com/tm...izon-galaxy-s7-edge-t-mobile-network-t3399618
but there is no confirmation if he found a solution.
any feed back would help.
Click to expand...
Click to collapse
Using a Tmobile S7 Edge going to Verizon won't work cause of a few reasons.
1. TMOBILE S7 and S7 edge are not built for CDMA networks that uses certain bands and network. Along with the security of CDMA networks.
2. There is no band 13 on tmobiles S7 and S7 Edge. Even you were to unlock it.
But going from CDMA to GSM most phones work due most of the hardware and software is already built in the phone.
Sent from my SM-G935T using XDA-Developers Legacy app

I can confirm this. Yes, your unlocked T-mobile S7/Edge will work with Verizon network if you flash the U firmware. I'm currently using my unlocked T-mobile S7 Edge with the U-firmware on the Verizon network. Voice, text, data work fine. No issues for me.
bounddyy said:
Hello all,
I want to switch to Verizon but I don't have a verizon sim to test my phone, I just got it unlocked through the unlock app. I've also read this post,
https://forum.xda-developers.com/tm...izon-galaxy-s7-edge-t-mobile-network-t3399618
but there is no confirmation if he found a solution.
any feed back would help.
Click to expand...
Click to collapse

You can flash the stock Tmobile ROM or the U firmware. The only reason I got a new S7 when I jumped from big red was I had a huge scratch on my screen. I was running the U firmware when I went into tmobile and used the girls sim card from her phone to prove I could do it...
Sent from my SM-G935T using XDA Premium HD app

Don't know but I am on T-Mobile and I use alot from Verizon thread no issues so far

OK, so I have a question. I'm also trying to move from t-mobile to Verizon but I'm trying to keep my same phone. My phone is already paid off and i currently running t-mobile's SM-G935U over SM-G935T. But a couple of days ago i asked a friend to let me barrow his verizon sim card to test it out. But received a message saying "Invalid sim Card" "network locked SIM card inserted." Did i messed up something during the installation of the SM-G935U?

edgtv said:
OK, so I have a question. I'm also trying to move from t-mobile to Verizon but I'm trying to keep my same phone. My phone is already paid off and i currently running t-mobile's SM-G935U over SM-G935T. But a couple of days ago i asked a friend to let me barrow his verizon sim card to test it out. But received a message saying "Invalid sim Card" "network locked SIM card inserted." Did i messed up something during the installation of the SM-G935U?
Click to expand...
Click to collapse
You need to UNLOCK your phone. It might be a Tmobile phone and running G935U software...but the sim is still locked to T-Mobile. Here is Tmobile unlock page information. you can request unlock in the T-mobile app or by calling T-Mobile....then it should see the Verizon sim and load up just fine once the phone itself is not locked to T-Mobile only sims. https://support.t-mobile.com/docs/DOC-1588
And for anyone else looking at this forum, There is no physical difference in hardware from a SM-G935T phone and a SM-G935U phone. Samsung actually made the hardware the same for all US Variants it is just the software that is different. And not that you would want too but you could load other carriers software on your phone if you wanted too(IE- running Verizon software on a SM-G935T, or ATT or SM-G935U (Stock Samsung Software) The only problem Running SM-G935U is they haven't upgraded the unlocked us phones to 7.0 yet. Where T-Mobile and other carriers already have nougat out.
The SM-G935U software however has all the US and even some Chinese LTE bandwidths enabled, and it also enabled the CDMA bandwidths to be used on the SM-G935 phones...hence why it will work with Verizon, Sprint, and even US Cellular if you can get them to put it on the account.*(I haven't dealt with US Cellular in years and with the new laws on moving phones from carrier to carrier in the US they might not have any issue with Bring your own phone to US Cellular anymore I do not know!)

lubu81 said:
I can confirm this. Yes, your unlocked T-mobile S7/Edge will work with Verizon network if you flash the U firmware. I'm currently using my unlocked T-mobile S7 Edge with the U-firmware on the Verizon network. Voice, text, data work fine. No issues for me.
Click to expand...
Click to collapse
lubu81 is there a step by step process to unlock and setup/flash/install phone completely to be able to use with Verizon?

cchavez136 said:
lubu81 is there a step by step process to unlock and setup/flash/install phone completely to be able to use with Verizon?
Click to expand...
Click to collapse
Had you flash any ROM before via Odin?. If so, you will only need to download the verizon firmware (sammobile.com) and flash those files. if not > Open odin (Attached) load all the files accordingly (AP, BL, CP, CSC) in ODIN> put your phone download mode ( pressing fingerprint button + volume down + power) > connect phone to PC > Once all files are ready in ODIN hit start. You will get the success message and phone will boot.

Mr. Clown said:
Had you flash any ROM before via Odin?. If so, you will only need to download the verizon firmware (sammobile.com) and flash those files. if not > Open odin (Attached) load all the files accordingly (AP, BL, CP, CSC) in ODIN> put your phone download mode ( pressing fingerprint button + volume down + power) > connect phone to PC > Once all files are ready in ODIN hit start. You will get the success message and phone will boot.
Click to expand...
Click to collapse
Thank you so much,. when i try to load i get the below message
OSM all threads completed (succeed 0/failed 0)

cchavez136 said:
Thank you so much,. when i try to load i get the below message
OSM all threads completed (succeed 0/failed 0)
Click to expand...
Click to collapse
Exit completely ODIN (make sure you run it as administrator), repeat the process and make sure all files are uploaded (AP takes a long time to upload) make sure to use the CSC file label as HOME_CSC. Try to flash again.

Mr. Clown said:
Exit completely ODIN (make sure you run it as administrator), repeat the process and make sure all files are uploaded (AP takes a long time to upload) make sure to use the CSC file label as HOME_CSC. Try to flash again.
Click to expand...
Click to collapse
Does the phone have to be unlocked before adding these files or does it matter?

cchavez136 said:
Does the phone have to be unlocked before adding these files or does it matter?
Click to expand...
Click to collapse
If you are going to use a verizon sim, you will need to have it unlocked. Firmware flash won't sim unlock/lock the phone.

Mr. Clown said:
Exit completely ODIN (make sure you run it as administrator), repeat the process and make sure all files are uploaded (AP takes a long time to upload) make sure to use the CSC file label as HOME_CSC. Try to flash again.
Click to expand...
Click to collapse
i flashed the rom. afterwards i got an error message with a dead android. after about 5 min it takes me to android recover menu with a log in white that shows a lot of E: failed messages. what do i do now?

unknownsupervillain said:
i flashed the rom. afterwards i got an error message with a dead android. after about 5 min it takes me to android recover menu with a log in white that shows a lot of E: failed messages. what do i do now?
Click to expand...
Click to collapse
Ok, which ROM did you flash and what version of android you previously had in your phone?

Mr. Clown said:
Ok, which ROM did you flash and what version of android you previously had in your phone?
Click to expand...
Click to collapse
Thanks for the quick reply. I thought I was gonna be waiting months. I got it tho. The home csc file wasn't working so I used the other one that reset the phone to stock. It was g935u firmware for tracfone from T-Mobile if that helps anyone in the future.

unknownsupervillain said:
Thanks for the quick reply. I thought I was gonna be waiting months. I got it tho. The home csc file wasn't working so I used the other one that reset the phone to stock. It was g935u firmware for tracfone from T-Mobile if that helps anyone in the future.
Click to expand...
Click to collapse
Great it worked.

I flashed the tracfone rom and everything is working well. I got a software update notification. Should ignore it or is it ok to update?

Bumping the thread...sorry guys. I just jumped ship from Verizon and went to Tmobile today with my S7 Edge along with my wifes S7 Edge. Can I flash her phone with the U firm from TMobile and is the U firmware from tmobile the same U firm that is provided to Verizon? Jist wondering. I've used Odin plenty and understand flash process.

Updated Verizon G950U now no service

I have a stock Verizon G950U (on Selectel prepaid but that shouldn't be an issue) and used the PC software to install the latest update NRD90M.G950USQS2BQL1
Immediately following the reboot I have not have service since. My sim works in other phones, took S8 to Selectel store and they confirmed working Sim and said it was a device issue. I have factory reset and even restored the firmware with the software again. I don't get a ton of service in my rural area but was able to activate an old S3 that I had lying around. The Selectel store is also in a larger city with plenty of service.
The radio is on as it shows bars, scans and shows networks, but absolutely will not register manually or automatically.
My limited knowledge and searching says that I cannot directly downgrade the firmware to an older working version. I've rooted older devices but last I played with it KNOX and the risks of bricking are getting ridiculous unless someone can specifically state otherwise for this device and link me to videos and direct download links.
Thanks in advance, I'm pulling my hair out. Short of rooting or waiting for the next update to hopefully fix it I don't know what to do.

schmitey said:
I have a stock Verizon G950U (on Selectel prepaid but that shouldn't be an issue) and used the PC software to install the latest update NRD90M.G950USQS2BQL1
Immediately following the reboot I have not have service since. My sim works in other phones, took S8 to Selectel store and they confirmed working Sim and said it was a device issue. I have factory reset and even restored the firmware with the software again. I don't get a ton of service in my rural area but was able to activate an old S3 that I had lying around. The Selectel store is also in a larger city with plenty of service.
The radio is on as it shows bars, scans and shows networks, but absolutely will not register manually or automatically.
My limited knowledge and searching says that I cannot directly downgrade the firmware to an older working version. I've rooted older devices but last I played with it KNOX and the risks of bricking are getting ridiculous unless someone can specifically state otherwise for this device and link me to videos and direct download links.
Thanks in advance, I'm pulling my hair out. Short of rooting or waiting for the next update to hopefully fix it I don't know what to do.
Click to expand...
Click to collapse
Out of chance have you checked the baseband and iemi in info to make sure they are ok?

TheMadScientist said:
Out of chance have you checked the baseband and iemi in info to make sure they are ok?
Click to expand...
Click to collapse
it shows imei and baseband of G950USQS2BQL1

schmitey said:
it shows imei and baseband of G950USQS2BQL1
Click to expand...
Click to collapse
Ok so its not a corrupt EFS issue. have you gone into netwrok and switch to global or anything....
Does it show your phone number in the info as well That will tell if its reading sim or not

It does show my number from sim after booting up without a sim and then inserting. I don't see any global settings. Again from the update no settings changed, since then I've wiped to factory settings numerous times.
I can't find a fricken stock rom file anywhere for crying out loud, just loads of register spam sites.
I think I'm downloading an Oreo 8.0 rom but can I downgrade later and again where's the dam file?

schmitey said:
It does show my number from sim after booting up without a sim and then inserting. I don't see any global settings. Again from the update no settings changed, since then I've wiped to factory settings numerous times.
I can't find a fricken stock rom file anywhere for crying out loud, just loads of register spam sites.
I think I'm downloading an Oreo 8.0 rom but can I downgrade later and again where's the dam file?
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/

schmitey said:
I have a stock Verizon G950U (on Selectel prepaid but that shouldn't be an issue) and used the PC software to install the latest update NRD90M.G950USQS2BQL1
Immediately following the reboot I have not have service since. My sim works in other phones, took S8 to Selectel store and they confirmed working Sim and said it was a device issue. I have factory reset and even restored the firmware with the software again. I don't get a ton of service in my rural area but was able to activate an old S3 that I had lying around. The Selectel store is also in a larger city with plenty of service.
The radio is on as it shows bars, scans and shows networks, but absolutely will not register manually or automatically.
My limited knowledge and searching says that I cannot directly downgrade the firmware to an older working version. I've rooted older devices but last I played with it KNOX and the risks of bricking are getting ridiculous unless someone can specifically state otherwise for this device and link me to videos and direct download links.
Thanks in advance, I'm pulling my hair out. Short of rooting or waiting for the next update to hopefully fix it I don't know what to do.
Click to expand...
Click to collapse
Don't worry about Knox, it's not possible to trip it on a 950u

Tried flashing to BQK5 with moderate success. Passed with Odin (which csc file should I use?) but on reboot it stalled at 32% when installing. Rebooted and after flash screen updated android and showed BQK5 but all my data and apps were there so i likely screwed something up. Installed sim card and momentarily showed 4g and appeared to register but at reboot did the same crap with no service.
Called Samsung prior to flashing and no surprise that was a colossal waste of time. I'm not paying them $200+ to fix an unrelated issue with the back glass that cracked with a case on and phone has never been dropped. They did say that they're partnered with best buy but that's two hours of driving for me...I'd fix the back glass myself and try to get them to give me a new phone if it came to it.
Verizon software shows an update now so I'll let it download (again...takes all night for some stupid reason) and vainly let it flash to current version.
I think I found the Oreo 'final' update so might try that...looks like it installs off an sd card if I can find an old one.

Unlocked Samsung S8 to Xfinity Mobile

I recently switched to Xfinity mobile from AT&T. I got the cheap Moto phone for basically free but would like to use my GS 8 factory unlocked.
When I put in the SIM Card my GS8 is unable to connect to the network.
I recently tried rooting my device and that failure resulted in a warranty claim. Now that I have it back I need assistance... Don't want to spend the money on a new phone as my GS8 works just fine.
Saw a recommendation to flash my device to Xfinity firmware but not sure about this approach given my recent root failure.
Anyone ever BYOD to Xfinity and had to work around the network issues?

I'm a complete noob, but you say your s8 is unlocked so have you tried to change the apn settings for Xfinity mobile

Typically, it's very hard to "brick" a device. As long as you are able to boot your device in upload mode, it's not technically bricked. Most flashing errors can be fixed by booting the phone into upload mode and flashing stock (the original baseband file of the device) firmware in Odin.
I personally think you should be fine using an unlocked phone on Xfinity Mobile (even though it's not technically supported). When you flash in Odin make sure the CSC file is from Xfinity Mobile. Try doing some research in the Carrier Switch thread first.

State.of.mind said:
Typically, it's very hard to "brick" a device. As long as you are able to boot your device in upload mode, it's not technically bricked. Most flashing errors can be fixed by booting the phone into upload mode and flashing stock (the original baseband file of the device) firmware in Odin.
I personally think you should be fine using an unlocked phone on Xfinity Mobile (even though it's not technically supported). When you flash in Odin make sure the CSC file is from Xfinity Mobile. Try doing some research in the Carrier Switch thread first.
Click to expand...
Click to collapse
You mean download mode. Upload only is bricked

zekeman66 said:
I recently switched to Xfinity mobile from AT&T. I got the cheap Moto phone for basically free but would like to use my GS 8 factory unlocked.
When I put in the SIM Card my GS8 is unable to connect to the network.
I recently tried rooting my device and that failure resulted in a warranty claim. Now that I have it back I need assistance... Don't want to spend the money on a new phone as my GS8 works just fine.
Saw a recommendation to flash my device to Xfinity firmware but not sure about this approach given my recent root failure.
Anyone ever BYOD to Xfinity and had to work around the network issues?
Click to expand...
Click to collapse
First off welcome to XDA Im pretty sure I saw you post on the XFIN forums..
Yea I have never seen that issue I have used several byod devices on XFIN all where verizon based though..Which does not matter on s8 as it is a multi carrier device
So first you need to see which firmware you are currently running
Download that exact same firmeware with cct as csc which is what determines carrier Heck if your on tonight I can upload a CCT csc and you should be able to flash one in ODIN if yours is the 950u1 which is unlocked s8 model We will be changing it to a regular 950u which is carrier....
I am Like the local Xfinity guru here as I use them I have mine rooted and everything even bricked several to previous said upload mode But I was playing with deep deep stuff.Nothng that odin can really harm

@HoosierDaddy
Can you upload the Carrier Switch files please?

sresam89 said:
@HoosierDaddy
Can you upload the Carrier Switch files please?
Click to expand...
Click to collapse
Goto sammobile or updato who ever you get your firmwares from and get the CCT branded firmware of your likeness of bootloader revision
I do not have any firmwares on hand any more I lost my old gmail account and my gdrive as well I am starting from scratch

Baseband not found [XT1766 SPerry/Boost Mobile]

Somehow or another I have managed to screw up my modem on my SPerry XT1766 (Boost Mobile).
I only get Emergency Calls Only radio signal, Settings app and bootloader info shows Baseband Not Found or Unknown.
I tried using RSDLite to flash
XT1766_SPERRY_SPRINT_7.1.1_NCQS26.69-64-10_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC
which contains the fsg.mbn and NON-HLOS.bin files, but this doesn't seem to help. I've tried multiple firmwares with multiple different modems and nothing seems to be getting my modem up and going. Back when I originally updated I flashed the partition updater also. I have no idea what to do now. I'm downloading the 69-56 version to try that, but I doubt it'll be any different. If anyone has any idea on what to do that would be great. Thanks

Knuxyl said:
Somehow or another I have managed to screw up my modem on my SPerry XT1766 (Boost Mobile).
I only get Emergency Calls Only radio signal, Settings app and bootloader info shows Baseband Not Found or Unknown.
I tried using RSDLite to flash
XT1766_SPERRY_SPRINT_7.1.1_NCQS26.69-64-10_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC
which contains the fsg.mbn and NON-HLOS.bin files, but this doesn't seem to help. I've tried multiple firmwares with multiple different modems and nothing seems to be getting my modem up and going. Back when I originally updated I flashed the partition updater also. I have no idea what to do now. I'm downloading the 69-56 version to try that, but I doubt it'll be any different. If anyone has any idea on what to do that would be great. Thanks
Click to expand...
Click to collapse
Try my baseband updater from this thread. https://forum.xda-developers.com/mo.../rom-stock-android-7-1-1-rom-moto-e4-t3885821
It will attempt to update your baseband to the latest version (M8920_15000.280.06.58.06R) from firmware build NCQS26.68-64-11. If this doesn't work for you let me know, I may have a solution.

@Knuxyl
Are you on Boost network? I've seen the radio off problem with ppl using a different sim.

LenovoTech said:
Try my baseband updater from this thread. https://forum.xda-developers.com/mo.../rom-stock-android-7-1-1-rom-moto-e4-t3885821
It will attempt to update your baseband to the latest version (M8920_15000.280.06.58.06R) from firmware build NCQS26.68-64-11. If this doesn't work for you let me know, I may have a solution.
Click to expand...
Click to collapse
Yeah I already tried that but it jept giving me an error saying unknown command [ ]] or somrthing along those lines. i looked through the script and didnt see any typis. i think your NON-HLOS.img is different format than the NON-HLOS.bin files found in the stock firmwares, plus it's much larger. Anyways, tried a fastboot flash the modem with it and that didnt work either.

LenovoTech said:
Try my baseband updater from this thread. https://forum.xda-developers.com/mo.../rom-stock-android-7-1-1-rom-moto-e4-t3885821
It will attempt to update your baseband to the latest version (M8920_15000.280.06.58.06R) from firmware build NCQS26.68-64-11. If this doesn't work for you let me know, I may have a solution.
Click to expand...
Click to collapse
madbat99 said:
@Knuxyl
Are you on Boost network? I've seen the radio off problem with ppl using a different sim.
Click to expand...
Click to collapse
No I am not on a boost network but this problem goes more into firmware than network compatibility because the bootloadet itself isnt even recognizing the baseband. For the record I am still using a CDMA network like boost (Verizon)

Also as an update, the 56 version didn't fix it either

Knuxyl said:
No I am not on a boost network but this problem goes more into firmware than network compatibility because the bootloadet itself isnt even recognizing the baseband. For the record I am still using a CDMA network like boost (Verizon)
Click to expand...
Click to collapse
The latest update did that too many people. It won't work with a different sim. The radio will be off.
I bet if you put in a boost SIM, it would pop right on.
They changed something in the -8 firmware.
One guy building ROMs (not here anymore) made some changes to his build that got certain networks to work on his ROM.
He never got the chance to share exactly what he was changing.
It seems that if you booted the phone ever with the original sim inserted, it tripped a qfuse (of sorts) and it seems they have added a way for that particular reading to turn off the radio completely if you're not using one of their SIMs.

madbat99 said:
The latest update did that too many people. It won't work with a different sim. The radio will be off.
I bet if you put in a boost SIM, it would pop right on.
They changed something in the -8 firmware.
One guy building ROMs (not here anymore) made some changes to his build that got certain networks to work on his ROM.
He never got the chance to share exactly what he was changing.
It seems that if you booted the phone ever with the original sim inserted, it tripped a qfuse (of sorts) and it seems they have added a way for that particular reading to turn off the radio completely if you're not using one of their SIMs.
Click to expand...
Click to collapse
You are 100% on point. Sprint (and its subsidiaries) had Motorola Mobility to include code in an OTA update which would disable functionality of any network other than the original UICC (SIM). In other words, when you got a new Sprint compatible xt1766 (Sprint, Boost or Virgin Mobile), opened the box and booted the device with the preinstalled SIM in it, the xt1766 became forever locked to that network -- the OTA update carved that in stone. The update made it impossible to downgrade the baseband radio, killed all GSM functionality, and broke the radio on custom ROMs (the latter being unintended most likely). The only people I have heard of getting around this are the ones that didn't take the -8 OTA update. Like you were saying, I'd like to know what Jason M. done in his custom ROM to fix radio function, whereas at least the radio would work with the original SIM on a custom ROM. He said something about "adding missing symlinks" to the build.

I did this too somehow. I think this might bring your baseband back (it did for me), but... well, I'll get to the "but..." Anyway, Boot to TWRP, mount the Persist partition, then go to terminal or pull up an ADB shell and do:
chmod 0700 /persist/rfs/msm/mpss/datablock/id_00
Click to expand...
Click to collapse
Reboot with a SIM card inserted and voila, you maybe might have a baseband again. Hooray! Except in my particular case, I regained a baseband and then somehow lost an IMEI. Well, not really "lost," it's still there when I pull up the barcodes page... but on bootup it thinks it's 000000000000001. I still haven't ever fixed it, though I did manage to turn it to a single 0 somewhere along the line. Fkit.
But I don't know of anyone else who's lost their IMEI this way, and it's been too long ago and I've tried way too many failed fixes to remember what else could have triggered the problem to start with, so who knows. If you decide to try it, definitely make a backup of the Persist partition before you do anything...and make sure your backup turns out to be good first, not corrupt like mine turned out to be....sigh.

lugnut2099 said:
I did this too somehow. I think this might bring your baseband back (it did for me), but... well, I'll get to the "but..." Anyway, Boot to TWRP, mount the Persist partition, then go to terminal or pull up an ADB shell and do:
Reboot with a SIM card inserted and voila, you maybe might have a baseband again. Hooray! Except in my particular case, I regained a baseband and then somehow lost an IMEI. Well, not really "lost," it's still there when I pull up the barcodes page... but on bootup it thinks it's 000000000000001. I still haven't ever fixed it, though I did manage to turn it to a single 0 somewhere along the line. Fkit.
But I don't know of anyone else who's lost their IMEI this way, and it's been too long ago and I've tried way too many failed fixes to remember what else could have triggered the problem to start with, so who knows. If you decide to try it, definitely make a backup of the Persist partition before you do anything...and make sure your backup turns out to be good first, not corrupt like mine turned out to be....sigh.
Click to expand...
Click to collapse
Seriously, you unbricked my kids phone!

Requested permission to access your file twice
LenovoTech said:
Try my baseband updater from this thread. https://forum.xda-developers.com/mo.../rom-stock-android-7-1-1-rom-moto-e4-t3885821
It will attempt to update your baseband to the latest version (M8920_15000.280.06.58.06R) from firmware build NCQS26.68-64-11. If this doesn't work for you let me know, I may have a solution.
Click to expand...
Click to collapse
Is your updater still available?
May I please download your file?
my email: [email protected]
thank you

ELEKTRIKMESSIAH said:
Is your updater still available?
May I please download your file?
my email: [email protected]
thank you
Click to expand...
Click to collapse
You see that member's account disabled? So.... You're talking to no one

Reading is fundamental

Any Gsm firmware that allows oem unlocking.

So i successfully rooted my unlocked att version of the s5e.
everything was great until i popped my sim back in and the device wouldnt connect to att's network
im assuming thats it because the base os firmware was CDMA and not GSM so the bands i needed werent available.
i flashed another os i think its tmobile. no oem unlocking feature in the developer mode. im trying the trick to unlock it with not luck.
anyone have any advice?
So i figured something out. as ive been trying to flash different firmware.
it is now rejecting ALL Cdma firmware. and will only accept GSM firmware.

So after trying everything i finally just started trying every version of odin i could find. and finally found one that worked lol

Jobudden said:
So after trying everything i finally just started trying every version of odin i could find. and finally found one that worked lol
Click to expand...
Click to collapse
Perhaps it will be helpful to others. Could you elaborate?

ok to start off i followed the steps from another post https://forum.xda-developers.com/t/...908u1-versions.4400511/page-155#post-88289615
i didnt have lte data and i needed it; so i reflashed ATT's firmware. when i went to try to load the us cellular firmware again. it would fail at system. everytime. after flashing lots of firmwares to get it to oem unlock, i finally discovered that. it was only failing on any firmware that was CDMA related.
spent an entire day and had almost given up.
then i started trying to flash the us cellular with every odin version i could find. and finally odin v3.13.1 raymond patched odin worked.
but after finally getting it to root again. i still have to figure out a way to get lte data on ATT sim

and i now have data with AT&T by following these APN instructions from AT&T
Program Data Settings for Your Device
Can’t connect to the internet on your mobile device? Here’s how to set up the access point name (APN) to get you going again.
www.att.com
used the broadband for android section,
hope this helps someone else