Related
Hello. Please help me. I have a Japanese version of G2 (L-01F - DoCoMo) and i tried to flash an european version of kitkat because i couldn't update in OTA. Now the phone is bricked, it is bootlooping, the Download Mode doesn't work, it shows a few of blue dots and it stays there (the phone can't be recognized on PC using the USB cable). I can enter the Recovery Mode (the grey screen with LG logo) where the phone can be read by PC and using ADB tool is shown as "recovery". I can't use fastboot.exe because the device is not being recognized. What can i do? Thank you very much.
unkn0wn68 said:
Hello. Please help me. I have a Japanese version of G2 (L-01F - DoCoMo) and i tried to flash an european version of kitkat because i couldn't update in OTA. Now the phone is bricked, it is bootlooping, the Download Mode doesn't work, it shows a few of blue dots and it stays there (the phone can't be recognized on PC using the USB cable). I can enter the Recovery Mode (the grey screen with LG logo) where the phone can be read by PC and using ADB tool is shown as "recovery". I can't use fastboot.exe because the device is not being recognized. What can i do? Thank you very much.
Click to expand...
Click to collapse
Can someone help me please ?
unkn0wn68 said:
Can someone help me please ?
Click to expand...
Click to collapse
I have the same problem. Please tell me if you can fix it.
http://forum.xda-developers.com/lg-g2/help/device-conecting-to-pc-download-mode-t2996249
ronen1n said:
I have the same problem. Please tell me if you can fix it.
http://forum.xda-developers.com/lg-g2/help/device-conecting-to-pc-download-mode-t2996249
Click to expand...
Click to collapse
Actually i'm trying to repair it since October 2014. No-one knows the solution. I went to 3 different GSM Services and they don't know what to do...
So...when i'm trying to put it in download mode it stays like this and the PC doesn't recognize it.
The only way to connect the phone to the computer is to put it in recovery mode (Backup & Restore) by holding Volume Up and Power Button at the same time with the phone turned off. It should appear something like this. The PC recognizes the phone but only in ADB. Look.
The third possible screen, which also is useless is this by typing in the CMD the following: "adb reboot recovery" (click). Here, the PC doesn't recognize the phone too.
Fastboot doesn't work.
And that's my problem. I don't know what to do.
unkn0wn68 said:
The PC recognizes the phone but only in ADB. Look.
Click to expand...
Click to collapse
If there are any custom roms that will run on your phone, adb push it to the sdcard and flash in TWRP.
iowabowtech said:
If there are any custom roms that will run on your phone, adb push it to the sdcard and flash in TWRP.
Click to expand...
Click to collapse
I have permission problems...
unkn0wn68 said:
I have permission problems...
Click to expand...
Click to collapse
?
Your screenshot above shows the device being recognized via adb in recovery. What permission problems?
Hi guys, I'm having a weird problem with my zenfone 5 (a501cg). I have searched a lot but still can't find out a proper solution So I post it here and try to provide as much information as possible so hopefully developers at xda can help me.
My phone is rooted and I'm currently using modded rom called "bazzrom pinaslang" in the forum. Recently I want to use another rom so I decide to use adb sideload again.
However, the problem occurs: using adb sideload only show "error" message". BUT Adb devices show the phone.
Then I decide to use adb reboot fastboot to enter fastboot. But the phone only show a usb icon, and using "fastboot devices" doesn't show the device anymore.
I try other way by enter recovery mode "adb reboot recovery". The phone show resting android with "no command" message. I also try hold power and press down volumn after that but nothing happend. I try anything with that "power" + "volumn" combo but nothing happend (or it just shutdowns the phone).
Also, using "power" + "up volumn" to enter Droid boot doesn't work.
Driver is install. In device manager it shows "Android composite adb interface".
The only good news is my phone still boots normally and I can use it. Please help me get back my fastboot so I can upgrade my phone to Lollipop and other modded ROM.
Thank you so much !!!!
techgeard said:
Hi guys, I'm having a weird problem with my zenfone 5 (a501cg). I have searched a lot but still can't find out a proper solution So I post it here and try to provide as much information as possible so hopefully developers at xda can help me.
My phone is rooted and I'm currently using modded rom called "bazzrom pinaslang" in the forum. Recently I want to use another rom so I decide to use adb sideload again.
However, the problem occurs: using adb sideload only show "error" message". BUT Adb devices show the phone.
Then I decide to use adb reboot fastboot to enter fastboot. But the phone only show a usb icon, and using "fastboot devices" doesn't show the device anymore.
I try other way by enter recovery mode "adb reboot recovery". The phone show resting android with "no command" message. I also try hold power and press down volumn after that but nothing happend. I try anything with that "power" + "volumn" combo but nothing happend (or it just shutdowns the phone).
Also, using "power" + "up volumn" to enter Droid boot doesn't work.
Driver is install. In device manager it shows "Android composite adb interface".
The only good news is my phone still boots normally and I can use it. Please help me get back my fastboot so I can upgrade my phone to Lollipop and other modded ROM.
Thank you so much !!!!
Click to expand...
Click to collapse
Hi,
Have you tried to boot into your system, enable USB debugging and run
Code:
adb reboot-bootloader
?
dgadelha said:
Hi,
Have you tried to boot into your system, enable USB debugging and run
Code:
adb reboot-bootloader
?
Click to expand...
Click to collapse
Hi dgadelha, thanks for your reply.
I have tried your suggestion before but phone only reboots and display usb icon. I also try power volumn combi like i did in my post but still nothing happened.
Usb debugging is enabled.
Techgeard.
techgeard said:
Hi dgadelha, thanks for your reply.
I have tried your suggestion before but phone only reboots and display usb icon. I also try power volumn combi like i did in my post but still nothing happened.
Usb debugging is enabled.
Techgeard.
Click to expand...
Click to collapse
In that case, follow the "Last resort" part of this guide http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=33800
It will reinstall your fastboot when the USB icon appears
dgadelha said:
In that case, follow the "Last resort" part of this guide
It will reinstall your fastboot when the USB icon appears
Click to expand...
Click to collapse
Hi dgadelha,
I have seen your link before my post, but I still wonder because the "last resort" in the link is used for "bricked" phone or the one that doesn't start up or stuck in somewhere. My phone can still boot and use quite normal : ( except one thing that my sd card always unmounted in this Pinaslang modded rom.
TG.
UPDATE I decide to try xFSTK but my computer still recognizes the device as "adb..." . if I turn off developer mode it becomes "portable device" in Window Device Manager.
The xFSTK can't recognize any Cloverfieldplus. (it shows "CLOVERFIELDPLUS...: 0")
TG.
techgeard said:
Hi dgadelha,
I have seen your link before my post, but I still wonder because the "last resort" in the link is used for "bricked" phone or the one that doesn't start up or stuck in somewhere. My phone can still boot and use quite normal : ( except one thing that my sd card always unmounted in this Pinaslang modded rom.
TG.
Click to expand...
Click to collapse
Hi,
Because the last resort will use a hardware function (xFSTK way) to update your dnx, ifwi and fastboot images. This way you can restore your fastboot.
Thanks.
techgeard said:
UPDATE I decide to try xFSTK but my computer still recognizes the device as "adb..." . if I turn off developer mode it becomes "portable device" in Window Device Manager.
The xFSTK can't recognize any Cloverfieldplus. (it shows "CLOVERFIELDPLUS...: 0")
TG.
Click to expand...
Click to collapse
You must instal the drivers it mentioned.
Also it will appear as Cloverview when the USB logo appears
Thanks!
dgadelha said:
Hi,
Because the last resort will use a hardware function (xFSTK way) to update your dnx, ifwi and fastboot images. This way you can restore your fastboot.
Thanks.
You must instal the drivers it mentioned.
Also it will appear as Cloverview when the USB logo appears
Thanks!
Click to expand...
Click to collapse
Hi dgadelha,
After a while I can start the xFSTK and begin download. However, after some attempts it always say error. The same messages show up as below:
Code:
start
sending dner
writeoutpipe dner
writeoutpipe 0
write----> dner
windriver Error: 0x20000015, Timeour expired
LogError
Error Code:1 - Connection Error
Failed to start Dldr state matchine, aborting...
void CloverviewPlusDownloader::do_abort()
Abott
FAIL
.....
techgeard said:
Hi dgadelha,
After a while I can start the xFSTK and begin download. However, after some attempts it always say error. The same messages show up as below:
Click to expand...
Click to collapse
Hi techgeard,
Looks like it's a driver timeout.
Which OS are you using? I see they used Windows 7 or before on the tests.
Also you should try getting xFSTK developers (on SourceForge) to help about this issue.
Thanks.
dgadelha said:
Hi techgeard,
Looks like it's a driver timeout.
Which OS are you using? I see they used Windows 7 or before on the tests.
Also you should try getting xFSTK developers (on SourceForge) to help about this issue.
Thanks.
Click to expand...
Click to collapse
Iam using Win7x64. The same with the guy posting in the link.
TG.
Hi guys,i was looking for guide how to unlock Axon 7 with latest update 1.2.0B05 but can't find anything. Can someone please help? I want to flash resurrection remix rom and not to brick phone...or is there better roms?
I cannot believe you're asking this question.
YOU HAVEN'T READ ANYTHING.
This board is full with uncountable guides.
https://forum.xda-developers.com/showthread.php?t=3573108
Not working....error: Length cannot be less than zero. Parameter name: length
salle25 said:
Not working....error: Length cannot be less than zero. Parameter name: length
Click to expand...
Click to collapse
Really, the last thing this forum needs is people unable to find guides on their own...
Ask @bkores about the error
WTF is wrong with you ppl?? I came to ask for help and you told me i'm retarded and stupid in nice way! If you don't wan't to help anyone then don't post reply or help and don't QQ about that! Thanx a lot!
salle25 said:
WTF is wrong with you ppl?? I came to ask for help and you told me i'm retarded and stupid in nice way! If you don't wan't to help anyone then don't post reply or help and don't QQ about that! Thanx a lot!
Click to expand...
Click to collapse
I'm sry but there's nobody here who will tell you're stupid,
People here are willing to help, but if you are too lazy to search for the guides (yes more then one is available) people will tell you that you are lazy.
Now I link a working guide for you
https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379
If you want it easier, search for the toolkit, it will make the most work for you.
Nope....not working. axon7tool.exe keeps crashing: "This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information."
Toolkit is useless too,MiFlash doesn't see phone when in EDL mode,reinstaled every possible driver i found and not even Zadig helped. I had custom roms on every singe phone i had,but this one is pain in the ...
Got it sorted....renaming to .bin was problem,thanx
question
me too
salle25 said:
Got it sorted....renaming to .bin was problem,thanx
Click to expand...
Click to collapse
Yes it's a bit harder to unlock and flash, good you managed that, I forgot to tell you that there are two toolkits win32 and win64.
Help cant repair my Axon 7 G latest B05
coremania said:
Yes it's a bit harder to unlock and flash, good you managed that, I forgot to tell you that there are two toolkits win32 and win64.
Click to expand...
Click to collapse
I try to use both method and still withaut succes also have message before run my phone "Your device software can't be checked for corruption, Please lock the bootloader"
I try almost evrything and nothing.
Bizon86 said:
I try to use both method and still withaut succes also have message before run my phone "Your device software can't be checked for corruption, Please lock the bootloader"
I try almost evrything and nothing.
Click to expand...
Click to collapse
So what don't you understand on this message? It tells you that your bootloader is already unlocked [emoji779] [emoji779]
marcus.linkenbach said:
So what don't you understand on this message? It tells you that your bootloader is already unlocked [emoji779] [emoji779]
Click to expand...
Click to collapse
No is not unlocked Axontooolkit says something oposit. I try both guides from this topic and:
- twrp dosent instal
- cant allow oem unllock
- when use UNLOCK BOOTLOADER Miflash dosent see my devices
Bizon86 said:
I try to use both method and still withaut succes also have message before run my phone "Your device software can't be checked for corruption, Please lock the bootloader"
I try almost evrything and nothing.
Click to expand...
Click to collapse
Your bootloader is unlocked, you only got to managed the rest, read this thread here, you will see it's familiar to your situation, read to the end.
https://forum.xda-developers.com/axon-7/help/to-date-guide-rooting-a2017g-b04-t3666808
I try this and still. nothing
Bizon86 said:
I try this and still. nothing
Click to expand...
Click to collapse
This is a bit thin.
A bit more details, you don't manage to go to edl mode ?
Did you try zadig to to get the right drivers working ?
What do see in device manager ?
Can you boot to stock recovery?
Did you tried to start from scratch with the guide, not the toolkit ?
No detail, no help
Edit: if you use only the toolkit, may ask in the toolkit thread for help ???
coremania said:
This is a bit thin.
A bit more details, you don't manage to go to edl mode ?
Did you try zadig to to get the right drivers working ?
What do see in device manager ?
Can you boot to stock recovery?
Did you tried to start from scratch with the guide, not the toolkit ?
No detail, no help
Edit: if you use only the toolkit, may ask in the toolkit thread for help ???
Click to expand...
Click to collapse
Zadig works for axon7tool only, MiFlash uses COM while axon7tool uses usb protocol
- The edl is dont working because phone go blank after use command and computer dosent see it.
- i try zading and try another driver effect is the same.
- in device menager i see android device but only when smartfon is running
- i start from the scratch the effect is the same
- i cant turn allow oem
the problem is with phone if i use adb reboot computer dont see phone
Bizon86 said:
Then what i must do any idea?
Click to expand...
Click to collapse
First of all, understand what you just did. If you don't explain it in an understandable way, we won't get any of it...
So:
-You unlocked the bootloader.
-axon7toolkit failed somewhere, and you didn't tell us exactly where
-you didn't try to use any guide to retake from where it ended up failing
-you didn't try to enter any mode
So just try to get to recovery or fastboot, using the 5 sec screen. After that we'll see
Bizon86 said:
- The edl is dont working because phone go blank after use command and computer dosent see it.
- i try zading and try another driver effect is the same.
- in device menager i see android device but only when smartfon is running
- i start from the scratch the effect is the same
- i cant turn allow oem
the problem is with phone if i use adb reboot computer dont see phone
Click to expand...
Click to collapse
If you go to edl, by adb command or by pressing both volume buttons while connecting usb the screen goes blank, that's ok, it has to be this way.
Why you want to turn on allow oem, you are already unlocked.
Your issue seems to be the driver, I guess.
Edit: try this maybe, from the toolkit FAQ
The toolkit says my device is connected through ADB but adb commands don't work?
Your device may be unauthorized. Unlock your device, open a cmd window, type in "adb devices" and then accept the "Allow USB debugging" prompt on your phone. Make sure to check the "Always allow from this computer" box as well. If you don't get the prompt, try retoggling USB debugging, replugging your device in, and revoking all USB debugging authorizations in developer options.
Hi
sorry if post is duplicated , i search but not found on this topic
When i connect my mobile to pc and then run command to go to bootloader ,
it shows Daemon not running. Starting it now on port 5037
then goes to bootloader
in bootloader no command work there , means only adb reboot bootloader works
even fastboot devices shows nothing
please advise me what i have to do
Sorry for my bad English
Thanks
if from your pc you type:
adb reboot bootloader
does it go to the bootloader?
If so, while the bootloader is displayed, from the pc if you type:
fastboot devices
Are you saying it responds with nothing?
minhas4all said:
Hi
sorry if post is duplicated , i search but not found on this topic
When i connect my mobile to pc and then run command to go to bootloader ,
it shows Daemon not running. Starting it now on port 5037
then goes to bootloader
in bootloader no command work there , means only adb reboot bootloader works
even fastboot devices shows nothing
please advise me what i have to do
Sorry for my bad English
Thanks
Click to expand...
Click to collapse
So I'm confused.
If I type "adb reboot bootloader" with my phone connected; it boots into fast boot mode and will accept fastboot commands.
it shows the "Fastboot" screen with the option to start the device if the power buttoned is pressed.
What are you trying to do?
Are you saying you don't get the screen?
Zargone said:
if from your pc you type:
adb reboot bootloader
does it go to the bootloader?
If so, while the bootloader is displayed, from the pc if you type:
fastboot devices
Are you saying it responds with nothing?
Click to expand...
Click to collapse
Thanks
when i enter fastboot devices
it does nothing just go to next prompt
nothing happen
i want to unlock bootloader and root
Thanks once again
tech_head said:
So I'm confused.
If I type "adb reboot bootloader" with my phone connected; it boots into fast boot mode and will accept fastboot commands.
it shows the "Fastboot" screen with the option to start the device if the power buttoned is pressed.
What are you trying to do?
Are you saying you don't get the screen?
Click to expand...
Click to collapse
Thanks
with me when I type "adb reboot bootloader" with my phone connected; it boots into fast boot mode but in fastboot no command works
i want to unlock bootloader and root
thanks
Did you remember to go into the developer options and enable USB Debugging and OEM Unlock?
jhs39 said:
Did you remember to go into the developer options and enable USB Debugging and OEM Unlock?
Click to expand...
Click to collapse
That was my next question.
jhs39 said:
Did you remember to go into the developer options and enable USB Debugging and OEM Unlock?
Click to expand...
Click to collapse
Yes
tech_head said:
That was my next question.
Click to expand...
Click to collapse
Yes
I root many phones
its easy
even i try other cables and 3 different laptops and pc
and the result was same
minhas4all said:
Yes
I root many phones
its easy
even i try other cables and 3 different laptops and pc
and the result was same
Click to expand...
Click to collapse
What drivers are you using.
I presume you are on a Windows laptop?
yes on windows 10
Sent from my PH-1 using XDA Free mobile app
Sounds like you're using an older fastboot, so you'll need to do fastboot -i 0x2e17 <whatever_command>
Or you can get the latest platform tools from https://developer.android.com/studio/releases/platform-tools#downloads
Did you install the essential phone drivers?
not sure about version but download some days back from links provided.. any ways thanks download from ur link then let u know
thanks
Sent from my PH-1 using XDA Free mobile app
ziddey said:
Sounds like you're using an older fastboot, so you'll need to do fastboot -i 0x2e17 <whatever_command>
Or you can get the latest platform tools from https://developer.android.com/studio/releases/platform-tools#downloads
Click to expand...
Click to collapse
not sure about version but download some days back from links provided.. any ways thanks download from ur link then let u know
thanks
crixley said:
Did you install the essential phone drivers?
Click to expand...
Click to collapse
Thinks so but can u provide me the links? thanks
Hello, im new to the forums and i would like to get some help with this huawei on what to do. I recieved this phone already bricked from a friend, so i would like to see if i can make it work again. I dont know how the phone got bricked and i have no idea of what to do. The problem is that the phone starts in the huawei logo and then goes to a black screen and turns itself off again. The phone doesnt make it past that point. I tried to make a reset from recovery, but it doesnt work. In download mode i tried to download the latest recovery, but it says failed to download. In fastboot mode the phone says "Phone unlocked" in red letters and "FRP locked" in green letters.
Any idea of what to do in order to recover the phone ?.
BrattPitlord said:
Hello, im new to the forums and i would like to get some help with this huawei on what to do. I recieved this phone already bricked from a friend, so i would like to see if i can make it work again. I dont know how the phone got bricked and i have no idea of what to do. The problem is that the phone starts in the huawei logo and then goes to a black screen and turns itself off again. The phone doesnt make it past that point. I tried to make a reset from recovery, but it doesnt work. In download mode i tried to download the latest recovery, but it says failed to download. In fastboot mode the phone says "Phone unlocked" in red letters and "FRP locked" in green letters.
Any idea of what to do in order to recover the phone ?.
Click to expand...
Click to collapse
Hello and welcome !
Just thinking you should try to start a fresh & clean install
rolling back to android 6 regardless of the current firmware.
Took a look inside the UNIFIED HELP THREAD but didn't find
any L23 rollback package...
However, I found another LINK that looks promising.
Good luck :fingers-crossed:
For further explanations try asking here.
Dadditz said:
Hello and welcome !
Just thinking you should try to start a fresh & clean install
rolling back to android 6 regardless of the current firmware.
Took a look inside the UNIFIED HELP THREAD but didn't find
any L23 rollback package...
However, I found another LINK that looks promising.
Good luck :fingers-crossed:
For further explanations try asking here.
Click to expand...
Click to collapse
Nice, i will try this and inform back later.
Dadditz said:
Hello and welcome !
Just thinking you should try to start a fresh & clean install
rolling back to android 6 regardless of the current firmware.
Took a look inside the UNIFIED HELP THREAD but didn't find
any L23 rollback package...
However, I found another LINK that looks promising.
Good luck :fingers-crossed:
For further explanations try asking here.
Click to expand...
Click to collapse
Well it didnt work. It says "incompatibility with this version"
BrattPitlord said:
Well it didnt work. It says "incompatibility with this version"
Click to expand...
Click to collapse
Hi,
you should use the follovinq commands in fastboot mode and then post the results please:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar version
fastboot getvar vendorcountry
Can you access Recovery ? (Power + Volume Up)
-Alf- said:
Hi,
you should use the follovinq commands in fastboot mode and then post the results please:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar version
fastboot getvar vendorcountry
Can you access Recovery ? (Power + Volume Up)
Click to expand...
Click to collapse
im new to this, so i put those commands in windows CMD with the phone connected or how ?
I can get to the stock recovery from huawei.
BrattPitlord said:
im new to this, so i put those commands in windows CMD with the phone connected or how ?
I can get to the stock recovery from huawei.
Click to expand...
Click to collapse
Use ADB commands.
Open developers option and turn on the USB debugging. Connect your device to PC in MTP/FILES mode. Run command
ADB reboot bootloader
(the device will reboot to fastboot mode)
Now you can type fastboot commands.
-Alf- said:
Use ADB commands.
Open developers option and turn on the USB debugging. Connect your device to PC in MTP/FILES mode. Run command
ADB reboot bootloader
(the device will reboot to fastboot mode)
Now you can type fastboot commands.
Click to expand...
Click to collapse
How do i turn debugging if the phone is bricked ? I cant get past the huawei logo. However, i do have access to fastboot mode.
BrattPitlord said:
How do i turn debugging if the phone is bricked ? I cant get past the huawei logo. However, i do have access to fastboot mode.
Click to expand...
Click to collapse
Oh, sorry, my mistake . Okay, install on your PC "Minimal ADB and fastboot" , open it , connect the device in fastboot mode, and run commands.