Hi.
I tried to update my mother in law Huawei p8 lite,phone in settings showed there is a firmaware update available,so I done a backup then download via wifi android 6.0,after download complete its asked me to procced so i click to yes,phone restart to upgrade mode but was stuck on 0% progress for very long time so I tried to restart the phone via power off button but after that phone doesnt start again any more.
So I readed a lot what to do but nothing work for me.
I download android 6.0 to pc then copy dload folder to sd card,then when card in phone I pressed volume + and - and power the same time but nothing happend,phone just vibrate once for very short time and nothing.
I tried also using adb procedure but phone is not recognized in my laptop with windows 8,all drivers installed I believe,I have mined all internet for proper drivers,all adb and fastboot drivers installed,included huawei drivers and HiSuite softaware and even Handset WinDriver installed and windows 8 only seen device like on picture below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I plugged phone to laptop via usb cable,short vibrate and nothing,so I press power off and volume down same time and laptop see something but not properly,please check below:
ADB not seen any adb device after command "adb devices" .
I can manulally choose driver for that like e.g ADB interface device but ADB still not see anything.
Tried also with disconnected battery couse read on this forum its help sometimes but nothing,still same.
After doing all that just realize sometimes red led blinking so its mean battery is down,and wont charge via usb on the phone,so I charged battery via external charger connected straight to the wires on battery,now red led not blinking.
Tried also on another laptop with windows xp,same ,nothing happend,adb not see anything,but sometimes in device manager phone is recognized as below:
On other forum when is recognized like that its possible to fix but need special usb box,which I ovcourse dont have.
What else I can try?
Summary:
phone not recognized in laptop,even with unplugged battery
phone wont start,no logo nothing
wont update from sd card wiht dload
is it totally brick?
pls help/
Hi!
i think your phone board was damage in process, happened to me on a Alcatel Idol... The same thing. I think the phone was already a bit laggi, no?
.
Phone was not worked properly,thats what my mother in law said.
Its sometimes show just white screen after unlock,or camera wont switch on.
And battery draining fast.I thought firmware upgrade will fix it but its brick now(
Update:I have fixed the phone with dc phoenix software-Installed new board firmware and then stock rom and its all ok now.
alsat1 said:
Update:I have fixed the phone with dc phoenix software-Installed new board firmware and then stock rom and its all ok now.
Click to expand...
Click to collapse
It would be useful if you did a little tutorial with links.
Thank you
MARCOSOFT said:
It would be useful if you did a little tutorial with links.
Thank you
Click to expand...
Click to collapse
I found informations and tutorial on xda forum so its all here
alsat1 said:
I found informations and tutorial on xda forum so its all here
Click to expand...
Click to collapse
Did you have to pay for the phoenix software?
MARCOSOFT said:
Did you have to pay for the phoenix software?
Click to expand...
Click to collapse
Yes 15 euro for 72hours.
Related
I tried to instal new room when i finised i have bootlop an i try to go to recovery but not working,then i tried seus but teling me that i have latest software and no repair buton instal anyway this buton is gone what to do .I am on stock kernel so wat to do is ther any way to instal stock room or whatt help meee
Repair with PC Companion
http://www.sonyericsson.com/cws/sup...oads/subject/pccompanion/xperiax8?cc=gb&lc=en
I cant pc companon want to turn the phone but i cant turn the phone becouse wont bot only sony ericson leters
Go to PC Companion > Click on Support Zone > Click on Repair.
Click on a blue link "repair your phone" (or something like that)
It will download all the necessary stuff and ask you to put you phone in flash mode.
Flash mode: turn off your phone, press back button while you plug the USB cable. The green led will turn on.
Just wait until the process finish. Unplug the USB and your phone will be rebooted.
help i cant repair seus no pc compainon no its said ,seus you have latest software, pc companion ther is no new software yet for your phone
Haha I was about to help then somebody else did.
Just note, afted this you have to root your phone all over again. Back at where you started. Remember to fully understand things before doing it, or it could cause a lot of troubles and time wasting!
Hit the THANKS button if I helped you!
This mail was delivered from my W8 using Tapatalk!!
no it wont i click repair evrithing is starte preparing hold back key an then ther is no software upate ,i tried to flash this room [X8] Achotjan Semc Debrand Engine | V1.0_Beta1 | FreeXperia Project and now i am stuck please help
When you run PCC, left your phone unplugged. The software will not identify the phone, so you have to click on this link as I show in screen below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yes i did an then this after prepering to repair this room is messed my phone http://img11.imageshack.us/img11/7344/capturexti.png
hunn.. for me always work... it download software, prepare, then you plug phone, it install and finish.
i dont know about/why this error, sorry
yes for mee to always worked but now stuck after this room
wotanclient 350 save my ass
this app flashed me new firmware you have to register and you have one poen to do firmware on the phone.Atlast my phone is working again
Relax that is a soft brick and very simple to fix.
PCC and sues won't work for most people. You will need to download and repair with flashtool. Download the x8 ftf file and flash. Just Google xperia x8 softbrick to find the thread with the downloads, I would do it for you but I'm on my phone.
Sent from my XPERIA X8 using xda premium
After reboot no activity, display and LED black, after removing and putting battery back and turning on only short vibration.
Before brick mobile was detected in Windows correctly, also adb was working smoothly.
When connecting with USB cable windows detects unknown device. msinfo32.exe reports:
Code:
Device PNP Device ID
Flash MSM7225 USB\VID_22B8&PID_900E\5&2D1CCBD8&0&1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For unbrick you can use article from reynaldo_amin on droidevelopers.com forum:
1. Remove the phone battery and insert it again.
2. Press and hold down the camera key and vol -. then press the power button.
3. Having done this the phone has entered into a few seconds to "flash mode".
4. Then you can connect your phone to your PC and run the RSD Lite. By flashing the phone with any ROM will boot normally.
http://forum.xda-developers.com/attachment.php?attachmentid=1701017&stc=1&d=1359917665
Good Luck
Thanks!
Send from xt320 by Tapatalk
Thank you so much.......
Thank you so much, you saved my phone.
jkkk88 said:
After reboot no activity, display and LED black, after removing and putting battery back and turning on only short vibration.
Before brick mobile was detected in Windows correctly, also adb was working smoothly.
When connecting with USB cable windows detects unknown device. msinfo32.exe reports:
Code:
Device PNP Device ID
Flash MSM7225 USB\VID_22B8&PID_900E\5&2D1CCBD8&0&1
For unbrick you can use article from reynaldo_amin on droidevelopers.com forum:
1. Remove the phone battery and insert it again.
2. Press and hold down the camera key and vol -. then press the power button.
3. Having done this the phone has entered into a few seconds to "flash mode".
4. Then you can connect your phone to your PC and run the RSD Lite. By flashing the phone with any ROM will boot normally.
http://forum.xda-developers.com/attachment.php?attachmentid=1701017&stc=1&d=1359917665
Good Luck
Click to expand...
Click to collapse
good to see some thing about defy mini thanks men
Sent from my XT320 using Tapatalk
hay droidevelopers.com is down so how can i unbrick my XT321
or can u tell me where i find drivers for "Flash MSM7225"
plz help............
rohanbane said:
hay droidevelopers.com is down so how can i unbrick my XT321
or can u tell me where i find drivers for "Flash MSM7225"
plz help............
Click to expand...
Click to collapse
here you are
install motorola device driver and RSDLite then flash this file
http://www.hotfile.com/dl/184558517/a064690/TNBST_4_07.26.07RPD_flex_LATAM_RTL.zip.html
or this file
http://www.mediafire.com/download/ssp881rwq4kewpe/TNBST_4_07.1D.20RPS_flex_LATAM_VIVO.zip
i install every motorola device driver found on internet
but still "MSM 7225" driver are not found
plz help...
defy stuck on CMR
hi guys i defy was stuck on boot it keeps on showing motorola logo then i think there is a problem i think i did a mistake that i nstalled Cynogen 7 and after using it for some time i again installed a back up from miui rom there i did a mistake and when iam on the recovery menu i cant select any option touchscreen is not working..pls help me guys
Any updates for xt321; s27moto
Anything you can help for my 2 dead xt321
Hello, i whant to put 4.4.3 on N4 and with normal flash-all.bat(did it many times before on 4.4.2) and then phone was flashing booloader..waiting devices...and nothing.Phone screen is black only a sound on windows when i connect it.
How can i fix my nexus?
Edit: 1)if i shutdown with pwrbutton 10 sec and turn on via pwr+volume i hear as i connected the phone
2)if turn on normal red light a few sec..
Bricked???
Are you able to get to bootloader? Was it unlocked before you flashed the 4.4 3 image
Sent from my HTC One using Tapatalk
mrao said:
Are you able to get to bootloader? Was it unlocked before you flashed the 4.4 3 image
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
1)I had PA before on it
2)Yes i was unlocked
3)Black screen...nothing.Just a beep like i connect it to pc....and a red dot a few seconds.
krystyuc said:
1)I had PA before on it
2)Yes i was unlocked
3)Black screen...nothing.Just a beep like i connect it to pc....and a red dot a few seconds.
Click to expand...
Click to collapse
Just a wag, but have you tried letting it charge first?
Sent with my Nexus® 10 minus 3
Berrydroidcafe said:
Just a wag, but have you tried letting it charge first?
Sent with my Nexus® 10 minus 3
Click to expand...
Click to collapse
Yes.
Edit: If i plugit into a new pc it shows me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After some serch i think it's bricked....only Jtag can fix it
Don't think its bricked. Try type "fastboot devices" in a command prompt in your fastboot folder. If it shows up under listed devices its not bricked. I've had this happen where just the file that makes the screen light up didn't get installed. Just have to reinstall the bootloader. No big deal.
Scratch that!
I'll buy it from you for $5
M3drvr said:
Don't think its bricked. Try type "fastboot devices" in a command prompt in your fastboot folder. If it shows up under listed devices its not bricked. I've had this happen where just the file that makes the screen light up didn't get installed. Just have to reinstall the bootloader. No big deal.
Scratch that!
I'll buy it from you for $5
Click to expand...
Click to collapse
1)Already tryed that and the adb devices...no luck
2)Nothing is displayed on my n4 screen,absolutly black,but it's still on
3)my pc dose a sound when i connect/disconnect the phone
I found something
"Seems that while flashing that ROM you have managed to destroy parts of the Bootloader, wich finaly results in the device doing nothing. (Black Screen etc)
Partitialy you are right yes "QHS-USB Mode" means your device is hard bricked an in the so called QHS-USB Download Mode
but this mode is meant for vendors to flash bootloaders etc on the devices.
To access the device in a propper way u need some "non-public" tools wich QCOM usaly only supplies to vendors not to endusers!
Without thoose programs u will be not able to access the device in any way, even with thoose tools without the expierience and knowledge and files u need, i guess u will not be able to recover it yourself.
I do not want to risk some trouble with QCom at all so i do not can point u to the propper tools to use but i'm sure when using google u will be able to find out what tools i'm talking about.
In my mind the best way for you to recover that device is a JTAG
So my suggestion is to search for a JTAG in your region a JTAG in europe usaly is arround 30 euro but price can differ in your country"
So.....no luck till now,the phone is hardbricked.I'll send it monday to warranty,maybe they will fix it for free if not....then this is an excuse to buy N5
So after trying to backup everything in recovery and flash PACMAN ROM for my phone, everything seemed fine, until it rebooted... When the LG logo appeared, suddenly weird horizontal lines started going across my screen and suddenly the edges of the phone started greying until the whole phone started going greyish-white, then powered off. I tried rebooting several times, and eventually it just wouldn't boot at all. If I hild the power button, it vibrates for a sec and nothing. When I plugged it into my PC, I can access it like a USB storage drive and my internal storage is still there, but I can figure out how to fix my phone. Did my screen die? Is there a way I can recover my phone from my PC via USB?
BlackGuyRX said:
So after trying to backup everything in recovery and flash PACMAN ROM for my phone, everything seemed fine, until it rebooted... When the LG logo appeared, suddenly weird horizontal lines started going across my screen and suddenly the edges of the phone started greying until the whole phone started going greyish-white, then powered off. I tried rebooting several times, and eventually it just wouldn't boot at all. If I hild the power button, it vibrates for a sec and nothing. When I plugged it into my PC, I can access it like a USB storage drive and my internal storage is still there, but I can figure out how to fix my phone. Did my screen die? Is there a way I can recover my phone from my PC via USB?
Click to expand...
Click to collapse
Back up your internal storage to your pc, more importantly the nandroid which is in the TWRP folder. Then follow this guide to get your phone back to stock.
I think that rom is kk u can find more info about that problem in liquidsmoth thread please tell me if fix it if not that mean how I know maybe u need to replace something in motherboard
Art is right. Follow the guide to get back to stock. If that doesn't work then it's a hardware problem.
Looks like I'm never trying the pacman rom on the g2...
Ok update. After following the steps in that guide posted, the firmware loaded and the AT&T boot screen popped up after reboot, though now LG Flash Tool is still doing it's thing and the screen's off with the phone still in USB and power light slowly blinking red, so I have no idea if it's fine or not.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Alright, it turns out it completed the installation and I just had to unplug it, it now works! I just want to know of which custom ROM to go with now.
BlackGuyRX said:
Alright, it turns out it completed the installation and I just had to unplug it, it now works! I just want to know of which custom ROM to go with now.
Click to expand...
Click to collapse
Check the index in my signature, the roms are organised by android version and variant
Art Vanderlay said:
Check the index in my signature, the roms are organised by android version and variant
Click to expand...
Click to collapse
Well, you deserve the Thanks, mate! Maybe he/she is still new here.
raravi said:
Well, you deserve the Thanks, mate! Maybe he/she is still new here.
Click to expand...
Click to collapse
Cheers raravi. I assume it's a guy, as his name is Blackguy lol.
BlackGuyRX said:
Alright, it turns out it completed the installation and I just had to unplug it, it now works! I just want to know of which custom ROM to go with now.
Click to expand...
Click to collapse
Why dont you serach your requirements in D-802 section. I mean what are doing here bud.
http://forum.xda-developers.com/lg-g2/development-d802
Dear crowd, I need support with my Samsung Galaxy Tab S5e/SM T-725 (it is my first Samsung device).
I unlocked it and tried flashing it (with Odin3). This was not successful and now I do not manage to get the device to boot into the Download Mode anymore.
The device does not switch on anymore - only with charging cable connected. In this case it turns on and off eternally showing the below screenshot.
Connecting a USB-C cable while pressing combinations of Power+ any volume key combination does not lead to any result. Only pressing Power+VolumeUp+VolumeDown brings is for a little moment to the screen where I chose to unlock the device, bot after one secons it turns off again being in bootloop subsequently.
SmartSwitch as indicated on the screenshot below does not do anything as the device is constantly turning off again.
Does anyone have a clue how to convince the device to finally allow me flashing TWRP and a custom ROM in this situation?
Advice is more than welcome!.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ralxx said:
Dear crowd, I need support with my Samsung Galaxy Tab S5e/SM T-725 (it is my first Samsung device).
I unlocked it and tried flashing it (with Odin3). This was not successful and now I do not manage to get the device to boot into the Download Mode anymore.
The device does not switch on anymore - only with charging cable connected. In this case it turns on and off eternally showing the below screenshot.
Connecting a USB-C cable while pressing combinations of Power+ any volume key combination does not lead to any result. Only pressing Power+VolumeUp+VolumeDown brings is for a little moment to the screen where I chose to unlock the device, bot after one secons it turns off again being in bootloop subsequently.
SmartSwitch as indicated on the screenshot below does not do anything as the device is constantly turning off again.
Does anyone have a clue how to convince the device to finally allow me flashing TWRP and a custom ROM in this situation?
Advice is more than welcome!.
View attachment 5423645
Click to expand...
Click to collapse
This warning screen is still download mode. Try flash stock rom via Odin.
Chosse exact firmware, when start flashing you will see the white bar below that text.
Unfortunately, it does not work as the device switches off too quickly. Odin3 then just reports failure.
I wonder if there is a way to prevent the device from switching off so quickly.
dangtoi1993 said:
This warning screen is still download mode. Try flash stock rom via Odin.
Chosse exact firmware, when start flashing you will see the white bar below that text.
Click to expand...
Click to collapse
ralxx said:
Unfortunately, it does not work as the device switches off too quickly. Odin3 then just reports failure.
I wonder if there is a way to prevent the device from switching off so quickly.
Click to expand...
Click to collapse
so sorry, mine stuck at warning sreen so i can easy flash back.
If your tab fast switches off then maybe it got bootloader damaged, you need research flash by Qualcomn flash tool like QFIL, flashsing for Qualcomn chipset device when it in QDLoader 9008 mode.