doogee x5 max pro brick - Doogee X5 Guides, News, & Discussion

Hello,
I come to ask your help to solve a problem on a doogee x5 max pro.
After using it for a few months and then put away, I wanted to bring it out for a very small project.
I had the good idea to do a factory reset with an unofficial rom. I left it out and rescued a short time ago and I saw that there was still access to recovery.
I draw spflashtool and managed to install an official rom, February 2017.
The phone started but no access to Android, the phone was blocked in the boot process (on the logo doogee precisely)
After another test of ineffective flash, I now come to a stage or when I want to flash with an official ROM; spflashtool returns me:
Code:
BROM ERROR: S_FT_GET_Memory_FAIL (0xFDA)
Cannot found memory
I'm stuck at this stage ..

Related

Redmi pro rom problem

Hi everyone!
I have bougth a Redmi Pro on Gearbest and it came with Chinese/English Version of MIUI.
After a week of usage, i turned off my xiaomi and when i turned back on, it stucked on a Mi logo. Far as i discovered searching on web, it was a bug that other peopel have reported too.
I took a opportunity of having this bug to fix, to put other rom on the phone. A rom with Portuguese language witch is my mother lang.
I tried to put the new rom via "SP Flash took" with the fastboot mod but without success.
I requested the unlocking on Xiaomi Unlocking site and when they repplyed and i connected the xiaomi to the computer, the program (XiaomiMiFlash) gave me an error message telling ""Couldn´t verify device. Current account is diferent from the account info in the device"
No i can´t do nothing with the phone.
Can you guys have some idea how can i solve this?
Thank you all!
There is a good chance that the phone is already unlocked.
What was the problem with fastboot? Maybe drivers issue?
Have you tried flashing TWRP? If it takes then the phone is unlocked and you can proceed with flashing the xiaomi.eu or globerom.
kremmit said:
There is a good chance that the phone is already unlocked.
What was the problem with fastboot? Maybe drivers issue?
Have you tried flashing TWRP? If it takes then the phone is unlocked and you can proceed with flashing the xiaomi.eu or globerom.
Click to expand...
Click to collapse
Tks 4 the support!
About the Fastboot i putted the phone on fastboot mode and i disabled the Driver Signature Enforcement on Windows. I connected the phone to the computer and started to run the SP Flash Tool. After the process was completed it wont gave me any result because the phone still stucked on Mi logo..
I did'n tried the TWRP because in every tutorial tells me that i need to go to the Developer Mode and activate the USB debugging i can not access to that because the phone don't give me more than the Mi logo.
hmm the fastboot method should have worked. Have you tried it on another computer, maybe 32bit windows?
When finished flashing with miflash in fastboot did it say it was ok at the end or did it give you an error? Als tried to reboot a few times after flashing without usb cable in the phone?
kremmit said:
hmm the fastboot method should have worked. Have you tried it on another computer, maybe 32bit windows?
When finished flashing with miflash in fastboot did it say it was ok at the end or did it give you an error? Als tried to reboot a few times after flashing without usb cable in the phone?
Click to expand...
Click to collapse
Im losing my mind!
I tried again in my father's desktop wich have a 64bit windows 7 (I havent a 32 bit at home. I will try to get one borrowed)
I tried with the SP Flash Tool following a guide from "xiaomitips" and, in this computer, the program dornt even recognize my phone. I push the Download button but that give me no signal.
Is there any other way to do this? Other ways to put the rom in the phone? (Sorry the noob language)
franciscobcl said:
Im losing my mind!
I tried again in my father's desktop wich have a 64bit windows 7 (I havent a 32 bit at home. I will try to get one borrowed)
I tried with the SP Flash Tool following a guide from "xiaomitips" and, in this computer, the program dornt even recognize my phone. I push the Download button but that give me no signal.
Is there any other way to do this? Other ways to put the rom in the phone? (Sorry the noob language)
Click to expand...
Click to collapse
I'm out of ideas at this point.
I had some trouble with fastboot that my phone did restart when in fastboot mode.
Then i had to change the order of plugging in the cable and starting the program but after that all worked.
No idea what next ...
I had this issue with a Redmi 3. I can't remember the exact solution but I believe you have to have the developer ROM installed in order to unlock the bootloader. Maybe if you search for an anterior model such as the Redmi 3 you will find more information on how to load your ROM. I'm sure that it's the same method for most Xiaomi phones. Good luck!
I heard about do a Hard Reset but i dont know how to do that because i cant access to the OS of the xiaomi.
Is there a way to do a hard reset with the xiaomi stucked on Mi logo?
Tks!
Happy 2017 for all!
I tried to put my phone one Recovery Mode but it is blocked. Its like the phone on this video:
https://www.youtube.com/watch?v=tTzdQpex7BQ
How can i unlock this?
I never could get into the xiaomi recovery either but i managed to flash twrp through fastboot though.
franciscobcl said:
Tks 4 the support!
About the Fastboot i putted the phone on fastboot mode and i disabled the Driver Signature Enforcement on Windows. I connected the phone to the computer and started to run the SP Flash Tool. After the process was completed it wont gave me any result because the phone still stucked on Mi logo..
I did'n tried the TWRP because in every tutorial tells me that i need to go to the Developer Mode and activate the USB debugging i can not access to that because the phone don't give me more than the Mi logo.
Click to expand...
Click to collapse
Hi
Does your problem with sp flashtools and flashing the ROM be solved ?
Sent from my Redmi Pro
I had this problem, but I'd installed TWRP already. But you shouldn't need USB Debugging on to flash TWRP. If you manage to flash TWRP, flash a new ROM (I recommend xiaomi.eu (I think they have Portuguese)) and wipe the Dalvik cache, /cache, and /data (you probably won't have to wipe /data/media).
Miui themes
Sorry will start new item
Have you tried a different cable, that is why mine wasn't recognized at first.
I'm having the same problem here. The phone rebooted itself when I changed the locale, and hung at the Mi logo. I already had TWRP flashed. I also took the opportunity to install a new ROM; the Global Dev ROM. It installed with no errors and I wiped the Dalvik, cache, etc. Still hangs at the Mi logo, but this time without the little loading dots at the bottom. Any suggestions?
Update: I can bring it back to the original state with the loading dots and "powered by Android" at the bottom with a backup I took before flashing the new rom, but still no progress.
I managed to restore my phone using the video:
Flash Xiaomi Redmi Pro Using SP Flash Tool [Locked Bootloader]
I can't post links since I don't have enough posts here yet, but search for it on Youtube.
Update: It seems like the unlocking permissions on my account have been retroactively rejected, I wonder if that has something to do with it. I also can't seem to find the Global ROM for the Redmi Pro anymore, just the China one. Does anyone have a link for the official Global ROM on the Xiaomi site?
Update 2: Suddenly I have unlock permission again, without reapplying, so that's cool. I installed the Eu HMPro ROM, everything's working well so far.
Phosphenes said:
I managed to restore my phone using the video:
Flash Xiaomi Redmi Pro Using SP Flash Tool [Locked Bootloader]
I can't post links since I don't have enough posts here yet, but search for it on Youtube.
Update: It seems like the unlocking permissions on my account have been retroactively rejected, I wonder if that has something to do with it. I also can't seem to find the Global ROM for the Redmi Pro anymore, just the China one. Does anyone have a link for the official Global ROM on the Xiaomi site?
Update 2: Suddenly I have unlock permission again, without reapplying, so that's cool. I installed the Eu HMPro ROM, everything's working well so far.
Click to expand...
Click to collapse
What I did bro ?
I still have the same problem?
franciscobcl said:
Hi everyone!
I have bougth a Redmi Pro on Gearbest and it came with Chinese/English Version of MIUI.
After a week of usage, i turned off my xiaomi and when i turned back on, it stucked on a Mi logo. Far as i discovered searching on web, it was a bug that other peopel have reported too.
I took a opportunity of having this bug to fix, to put other rom on the phone. A rom with Portuguese language witch is my mother lang.
I tried to put the new rom via "SP Flash took" with the fastboot mod but without success.
I requested the unlocking on Xiaomi Unlocking site and when they repplyed and i connected the xiaomi to the computer, the program (XiaomiMiFlash) gave me an error message telling ""Couldn´t verify device. Current account is diferent from the account info in the device"
No i can´t do nothing with the phone.
Can you guys have some idea how can i solve this?
Thank you all!
Click to expand...
Click to collapse
You could try dowloading the official rom and then download the CHINESE version of mipc suite then enter fastboot and connect the phone
Normally the chinese mi pcsuite automaticly detects the phone is in fastboot mode, you could use google translate to translate it all just choose redmi pro on model selector (the top selection bar)the text there is untranslateable just choose the one that says pro
And then under it chose the one that translate to chinese
After That there's two tick box under it, choose the ROM you downloaded
After that chose the one that translate to install brush package, if it doesn't work choose the download brush package next to it
Thus method worked for me when my phone bricked hope it helps you

How to revive Hard bricked asus zenfone max 2016 zc550kl

Hi everyone i was trying to upgrade my phone's os which is 6.1 to 7.1. i did it with the help of TWRP which failed and my phone was working in recovery mode and. Later was strucked in boot loop. Later i was trying to flash stock rom. But my phone got bricked. It's off for several days it doesn't respond to pressing power buttons nor does it responds to connecting to charger. But while i connect it to computer the new usb added sound comes from computer.
I'm really strucked guys help me out. Every video i see online is for phone which are strucked in boot loop. I'm sure if I'm able to reach that state I'll make it working but for instance ineed to revive it. My friend says i have deleted bootloader how can i put it back ?. Also we disassembled it and assembled it again. It also didn't work.
Well you did something stupid. Upgrading from MM to Nougat without clean flash? Also flashing stock rom with TWRP? Well you can't revive anymore.. If you really Hard bricked buy new phone
Hitler97 said:
Hi everyone i was trying to upgrade my phone's os which is 6.1 to 7.1. i did it with the help of TWRP which failed and my phone was working in recovery mode and. Later was strucked in boot loop. Later i was trying to flash stock rom. But my phone got bricked. It's off for several days it doesn't respond to pressing power buttons nor does it responds to connecting to charger. But while i connect it to computer the new usb added sound comes from computer.
I'm really strucked guys help me out. Every video i see online is for phone which are strucked in boot loop. I'm sure if I'm able to reach that state I'll make it working but for instance ineed to revive it. My friend says i have deleted bootloader how can i put it back ?. Also we disassembled it and assembled it again. It also didn't work.
Click to expand...
Click to collapse
any luck reviving your phone? isn't there something like Odin for ASUS to reflash stock rom back?
Search youtube for asus zenfone max 8939 you will find twrp and 7.0 custom rom. My phone is zenfone max 2016 and I'm using resurrection remix rom.

Mi A1 stuck at MI logo page

Alright. just to get this out of the way, I used to do tech support for HTC many moons ago. like back when they were *the* name in originating new tech to smart phones. I worked my ass off to get into the R&D team that handled all the new products that got released and to our product recovery team(the idiots that try to put a good light on a bad decision made by corporate). I have rooted and installed custom ROMS and recovery software on several phones from them as well as since then with the latest being my old galaxy S7 loaded up with TWRP and lineagoe OS(although i do not remember which version now)
But i did not do literally *ANY* of that with my Xiaomi MiA1. the phone functioned how i wanted it to out of the box and with the stock ROM, i had no need or desire to do anything with the ROM.
I have all but completely given up on doing this on my own now. I have gone over every guide on the MI forums for xiaomi and i think i may have even exhausted the ones that are available here now too. I am not sure WTH the problem at this point even is but here is the lowdown:
:fingers-crossed:
got the update near the end of December/beginning of January to update my MI A1 to the new android pie version that just came out OTA(i actually have two of these phones, one i have not updated since the first update to oreo, and this one that is hardbricked from after the PIE update)
At first when i got the OTA update, my phone started to act sluggish. simple apps like messenger, or google drive that had always worked flawlessly suddenly were taking ages to load. So like any sensible person, i pulled my info to my SD card, took it out, and then did a system recovery to restore factory defaults and start with a fresh OS again, just like when windows starts behaving poorly.
only this did not fix the problem. It persisted with poor performance after the factory data reset and upon my next reboot, my phone just stopped loading when it got to the MI logo on the screen. i literally let the phone sit on this screen overnight thinking just maybe it was being slow to boot after the reset. No luck and in the morning it remained at this screen.
just to make a note:
-phone was purchased off of amazon, i have reached out to the seller(it was a business)
-phone is in CANADA, so there are no service centers
-i CANNOT enter recovery mode(pwr + volup + voldn), it just freezes at the mi screen
-i CAN enter fastboot, but cannot flash room
-bootloader is locked and i have not yet found a method that will successfully unlock it
-the miflash tool does not work(on any version what-so-ever)
-the mi unlock tool gets to 50% and then fails, cannot unlock
-i have installed minimal adb for fastboot, none of the related commands succeed(yes system sees the phone:
c:\adb>fastboot devices
91c0963c0804 fastboot)
-i cannot unlock bootloader here and cannot install twrp or any other recovery image and it will not allow it even temporarily
I've gotten desperate enough to have even gone to the extreme and tried EDL mode by using test point to enter, computer recognizes the device even as the qualcom 9008, still no luck with any of the tools or ROMs provided on Xiaomi's website.
So be real with me here ladies and gents.... should i take this thing on my next trip up a telecomm tower and biff it as hard as i can at the ground(obviously in a snowless area for the most satisfaction) or can you saintly people actually offer me some support on this to turn my brick paperweight back into a phone again?
it is also worth mentioning that this is my first post here because i have never before had a problem with following any of he guides on here to accomplish any task i've ever set out to do with an android device, but this beastly lil mother is seriously making me consider becoming an iphone person(not really but do you get the frustration here?)
I'm writing this at 5:30 in the morning after being up all night working on this task so if my info is missing somewhere along the line just poke me with stick and i will fill in the blanks as needed.
I couldn't be bothered to get and load screenshots tonight but i will get some up tomorrow after sleep, for now i am going to the graveyard to rest.
Thanks for any responses in advance here.
What error show miflash when you try to flash in edl mode?
balannaer said:
Alright. just to get this out of the way, I used to do tech support for HTC many moons ago. like back when they were *the* name in originating new tech to smart phones. I worked my ass off to get into the R&D team that handled all the new products that got released and to our product recovery team(the idiots that try to put a good light on a bad decision made by corporate). I have rooted and installed custom ROMS and recovery software on several phones from them as well as since then with the latest being my old galaxy S7 loaded up with TWRP and lineagoe OS(although i do not remember which version now)
But i did not do literally *ANY* of that with my Xiaomi MiA1. the phone functioned how i wanted it to out of the box and with the stock ROM, i had no need or desire to do anything with the ROM.
I have all but completely given up on doing this on my own now. I have gone over every guide on the MI forums for xiaomi and i think i may have even exhausted the ones that are available here now too. I am not sure WTH the problem at this point even is but here is the lowdown:
:fingers-crossed:
got the update near the end of December/beginning of January to update my MI A1 to the new android pie version that just came out OTA(i actually have two of these phones, one i have not updated since the first update to oreo, and this one that is hardbricked from after the PIE update)
At first when i got the OTA update, my phone started to act sluggish. simple apps like messenger, or google drive that had always worked flawlessly suddenly were taking ages to load. So like any sensible person, i pulled my info to my SD card, took it out, and then did a system recovery to restore factory defaults and start with a fresh OS again, just like when windows starts behaving poorly.
only this did not fix the problem. It persisted with poor performance after the factory data reset and upon my next reboot, my phone just stopped loading when it got to the MI logo on the screen. i literally let the phone sit on this screen overnight thinking just maybe it was being slow to boot after the reset. No luck and in the morning it remained at this screen.
just to make a note:
-phone was purchased off of amazon, i have reached out to the seller(it was a business)
-phone is in CANADA, so there are no service centers
-i CANNOT enter recovery mode(pwr + volup + voldn), it just freezes at the mi screen
-i CAN enter fastboot, but cannot flash room
-bootloader is locked and i have not yet found a method that will successfully unlock it
-the miflash tool does not work(on any version what-so-ever)
-the mi unlock tool gets to 50% and then fails, cannot unlock
-i have installed minimal adb for fastboot, none of the related commands succeed(yes system sees the phone:
c:\adb>fastboot devices
91c0963c0804 fastboot)
-i cannot unlock bootloader here and cannot install twrp or any other recovery image and it will not allow it even temporarily
I've gotten desperate enough to have even gone to the extreme and tried EDL mode by using test point to enter, computer recognizes the device even as the qualcom 9008, still no luck with any of the tools or ROMs provided on Xiaomi's website.
So be real with me here ladies and gents.... should i take this thing on my next trip up a telecomm tower and biff it as hard as i can at the ground(obviously in a snowless area for the most satisfaction) or can you saintly people actually offer me some support on this to turn my brick paperweight back into a phone again?
it is also worth mentioning that this is my first post here because i have never before had a problem with following any of he guides on here to accomplish any task i've ever set out to do with an android device, but this beastly lil mother is seriously making me consider becoming an iphone person(not really but do you get the frustration here?)
I'm writing this at 5:30 in the morning after being up all night working on this task so if my info is missing somewhere along the line just poke me with stick and i will fill in the blanks as needed.
I couldn't be bothered to get and load screenshots tonight but i will get some up tomorrow after sleep, for now i am going to the graveyard to rest.
Thanks for any responses in advance here.
Click to expand...
Click to collapse
take your sd card off your phone i had similar issues and fixed them that way
ccalixtro said:
What error show miflash when you try to flash in edl mode?
Click to expand...
Click to collapse
it depends on which version of the flash tool is used. the beta version of the flash tool claims that it is successful, but the phone will not load to the Android OS after that is completed and it still will not load into the recovery mode to attempt to factory reset or anything else.
other versions have given errors:
miflash 2017.7.20.0 gives the response after attempting for about 10 seconds of "ACK count don't match!"
miflash 2018.11.15.0 gives the error response of "cannot receive hello packet"
and as stated before the miflash beta goes through the complete flash process with the result stating a "success" response, but the phone will not load to OS, just remains stuck on the MI logo screen when the phone is booting up
i have some screen grabs of all this but i am not yet worthy through XDA to be permitted to share them
thanks for the reply
kuartito said:
take your sd card off your phone i had similar issues and fixed them that way
Click to expand...
Click to collapse
i dismantled the phone manually bro, when you use EDL mode this way the SIM/SD tray is removed you then remove the entire backplate and then disconnect the battery cable from the circuit board and you use the test point method to short two pins that force the system to start in EDL mode when you connect the usb-C cable, so unfortunately that is not the issue :crying:
it never seems to be the simple solutions
Thanks for the reply!
Still dead in the water on this one.
Going to look into getting a replacement, that is a disappointing end to the Xiaomi experience
Facing similar issue. Am able to flash however still stuck when device is rebooted with this message;
Supported API: 3
E: Failed to clear BCB message: failed to FSync/dev/block/bootdevice/by-name/miscperation not permitted.

Lenovo A6000 Hard Bricked - Cannot Find Solution - Sahara errors

Hi, so I've been around here for a while and I've had pretty good success with flashing phones.
However, I have a Lenovo A6000 that is hardbricked with Resurrection Remix ROM:
https://forum.xda-developers.com/lenovo-a6000/development/rom-resurrectionremix-5-8-1-t3555184
Followed the destructions and now it is stuck rebooting. I'll see the neat RR logo start and then it will freeze, and then reboot.....over and over. I didn't wipe the phone and start new...thought I could install TWRP and wipe it, flash the new ROM and be done. Nothing like being confident.
So now, it is hardbricked after trying to flash the stock rom....and I cannot figure out how to fix it. Downloaded QFIL, and the stock ROM, installed the Qualcomm drivers, put the phone into Fastboot with VOLUME DOWN + POWER BUTTON and QFIL see's the phone but gets stuck on fail sahara error. I have done countless searches online and the videos I have found don't resolve the problem. Google search turns up no solution. There is a thread here that basically just dies with no solution.
The phone ready for the trash bin?
Also tried Lenovo Downloader and it also gets stuck on step Sahara.
The little cheap phone belongs to a girlfriend of mine (she's a single mom) who has no money to buy a new one, and everyone here knows how awful the stock ROM. So I'm trying to help her out and flash this bugger. I had an A6000 before I bought my MiMax2 and it wasn't a bad little phone after getting RR on it.
Will anyone be willing to help?
?
So no one is willing to help with this problem huh?
From what I can tell the phone is junk now....even though both QFIL and Lenovo Downloader will see it when I plug it in.
Well...thanks anyway.
So who wants to be paid to help fix this problem? You must have PayPal and must be able to solve the problem.
I guess the problem is that a lower version OS can't be installed via QFIL. For example if the phone got bricked in lollipop you can't install kitkat on it via QFIL. Although the same version OS might work (lollipop to lollipop) and of course higher version OS will work.
I have also had some version of QcomDLoader flash tool work where other flash tools simply failed or even older versions of QcomDLoader didn't work.
This is the one that worked for me https://androiddatahost.com/dt3gh9
move firmware (SW_LENOVO BLABLABLA) to loca disk :C
restart pc > then flash again.

ALE-L21 Board Software Bricked please help!

Hello, Dear XDA-Developers.
I was trying some custom ROMs but when I installed Viper4Android and flashed it using Magisk the phone stucks on boot
However I have another problem, I found out that the internal storage of my phone got too small after upgrading into another version of Android, so I wanted to get back to Android 5 stock firmware completed to format the internal storage and not partitioning it as I thought so I tried to flash it in TWRP recovery but sadly after that I bricked the bootloader and the recovery. Next, I decided to flash a board image ALE-L02&L21&L23_MAA001077_Board_Software_general_05021SJN using IMAGE Download Software - IDTML01Ver1001, Still, the process got interrupted maybe because the phone was restarting itself and now I'm getting a screen that shows error after showing Huawei Ascend logo. Is there any chance to fix this dead phone but consider that my pc is no longer detecting the driver that I used to flash the board image, and I can't even turn off the phone now except if I let the battery dies.
Notice: I don't dare to use test points if there is no other choice how much it usually costs to fix it?

Categories

Resources