Hi
i got the Intex Aquafish with sailfish OS
and have successfully used the Jio Sim data only the process is as given below
1.Download jiovoice apk via the internet u wont get it on the android store via the phone
install is as you would any other APK on the phone
2. change the APN setting to jio
3. rebot the phone and insert the jio sim and Bang it works
it worked for me i am using the same
hope it helps :laugh::good::laugh:
jio on aqua fish
hey bro, i can use the data, but it wont connect to voice call..is any solution ? jio4gvoice cant get the permission
I am facing same issues. Jio voice app doesn't even connect
It shows error on connection even the 4g signal bar is full . The sim works fine for data and voice micromax canvas 6 pro
Jii 4g app says connect to a jiofi app with jio sim in it
Here is a guide how to enable VOLTE in RR without Jio4gvoice app.
Supported ROM :
RR 5.7.4
Instructions
1. Open ES File manager and enable hidden folder. Search .Jio4gvoive folder delete it. Then delete jio4g app and voice app.
2. Now again install jio4g voice app and register through it.
3. Now Delete Jio4gvoice app.
4. Open dialer and dial *#*#4636#*#* .
5. Scroll to end and open OEM specific settings.
6. And turn on MBN AUTO LOAD, volte debug, VT DEBUG, WFC DEBUG. ( After clicking on it will show turn off so don't get confused with it. )
7. In SIM Settings Disable Connected line indetification & open APN settings.
8. And If you have loop APN just edit APN "www" to "jionet" and save it. Keep APN PROTOCOL AND ROAMING PROTOCOL TO "IPv4" otherwise internet will not work.
9. Now reboot to recovery and wipe dalvik cache and cache only.
10. Restart your device and open dialer.
Workaround :
If you are not getting network in jio then open system ui tuner by pressing on settings icon in Qs panel or search it in setting.
Then add tiles "LTE" . Now enable LTE from QS Panel(check screenshot) You will get network.
If you are getting volte icon like volte1 and volte2 then volte is enable. Just try to call and enjoy. If it's help just click thanks.
If anyone is on lineage os try this and report me back if it's working on it too then I will edit it to lineage os too.
Those who will publish this guide in their site please give proper credits.
screenshot.
Thnx.. alot.. worked for me..in one go...:good:
Not this one but simple trick worked for me given by @TechGeekD without first step
no need to download any application to fix VoLTE
1). clean install latest build
2). goto settings -> SIM cards
3). set cellular data to Jio 4g & Calls to Jio
4). goto SIM 1 settings (or SIM 2 settings if Jio is in sim slot 2 )
5). see if Enhanced 4G LTE Mode is enabled or not !! enable it if not
6). goto Access Point Names (aka APN)
7). select 3 dot menu press Reset to default
8). add new APN with settings given below
APN SETTINGS
Name: ims
APN: IMS
APN Type : IMS
(notice one thing APN Type & APN is written in Capital !!!)
do not restart thats the bug ims setting stays there but not visible in settings cause after restarting we can not add new ims setting with same APN and APN Type but simple tweaking with APN & APN Type will fix it (but still don't restart after VoLTE gets working it will be gone again and you can't tweak it now)
Edit :- Selinux needs tobe on permissive mode
rohansalunkhe71 said:
Not this one but simple trick worked for me given by @TechGeekD without first step
no need to download any application to fix VoLTE
1). clean install latest build
2). goto settings -> SIM cards
3). set cellular data to Jio 4g & Calls to Jio
4). goto SIM 1 settings (or SIM 2 settings if Jio is in sim slot 2 )
5). see if Enhanced 4G LTE Mode is enabled or not !! enable it if not
6). goto Access Point Names (aka APN)
7). select 3 dot menu press Reset to default
8). add new APN with settings given below
APN SETTINGS
Name: ims
APN: IMS
APN Type : IMS
(notice one thing APN Type & APN is written in Capital !!!)
do not restart thats the bug ims setting stays there but not visible in settings cause after restarting we can not add new ims setting with same APN and APN Type but simple tweaking with APN & APN Type will fix it (but still don't restart after VoLTE gets working it will be gone again and you can't tweak it now)
Edit :- Selinux needs tobe on permissive mode
Click to expand...
Click to collapse
This is a permanent fix. His method is temporary due to restart won't allow volte. But this method works charming after restart also. Your choice, I am not forcing...
Not working here. I am on R 5.7.4. Had done a clean flash.
Tried every method. And even if VoLTE works, neither you can send sms nor receive.
Njishi said:
Not working here. I am on R 5.7.4. Had done a clean flash.
Tried every method. And even if VoLTE works, neither you can send sms nor receive.
Click to expand...
Click to collapse
Same here not working.. we have to wait for proper fixes by the devs
Sent from my LeEco Le 2 using XDA Labs
mdfarazb2 said:
Same here not working.. we have to wait for proper fixes by the devs
Sent from my LeEco Le 2 using XDA Labs
Click to expand...
Click to collapse
That's why moved on to stock until codeworkx will remove VoLTE fix from the to do list. And i yes i have a lot a patience. So i can wait. As developers has their personal life. And they have to manage it.
Njishi said:
That's why moved on to stock until codeworkx will remove VoLTE fix from the to do list. And i yes i have a lot a patience. So i can wait. As developers has their personal life. And they have to manage it.
Click to expand...
Click to collapse
yup.. I'm too waiting no hurry... Not a Hardcore VoLTE user
Sent from my LeEco Le 2 using XDA Labs
mdfarazb2 said:
yup.. I'm too waiting no hurry... Not a Hardcore VoLTE user
Sent from my LeEco Le 2 using XDA Labs
Click to expand...
Click to collapse
Yea !!! Problem is with SMS too... Until Dev fix those things we can have call... Hope so it will be fixed soon. I think there would be frimware patch.
not working on lineage os 14.1 december 22, 2017 build
veer.killerboy said:
Here is a guide how to enable VOLTE in RR without Jio4gvoice app.
Supported ROM :
RR 5.7.4
Instructions
1. Open ES File manager and enable hidden folder. Search .Jio4gvoive folder delete it. Then delete jio4g app and voice app.
2. Now again install jio4g voice app and register through it.
3. Now Delete Jio4gvoice app.
4. Open dialer and dial *#*#4636#*#* .
5. Scroll to end and open OEM specific settings.
6. And turn on MBN AUTO LOAD, volte debug, VT DEBUG, WFC DEBUG. ( After clicking on it will show turn off so don't get confused with it. )
7. In SIM Settings Disable Connected line indetification & open APN settings.
8. And If you have loop APN just edit APN "www" to "jionet" and save it. Keep APN PROTOCOL AND ROAMING PROTOCOL TO "IPv4" otherwise internet will not work.
9. Now reboot to recovery and wipe dalvik cache and cache only.
10. Restart your device and open dialer.
Workaround :
If you are not getting network in jio then open system ui tuner by pressing on settings icon in Qs panel or search it in setting.
Then add tiles "LTE" . Now enable LTE from QS Panel(check screenshot) You will get network.
If you are getting volte icon like volte1 and volte2 then volte is enable. Just try to call and enjoy. If it's help just click thanks.
If anyone is on lineage os try this and report me back if it's working on it too then I will edit it to lineage os too.
Those who will publish this guide in their site please give proper credits.
Click to expand...
Click to collapse
Please help me out bro
im using le 2 x 526 and recently changed rom to lineage os from stock rom.
i couldnot use volte to make calls without jio4g voice app.
please help me to fix this
Nykenztron said:
Please help me out bro
im using le 2 x 526 and recently changed rom to lineage os from stock rom.
i couldnot use volte to make calls without jio4g voice app.
please help me to fix this
Click to expand...
Click to collapse
Did you tried these workaround? Can you get volte icon in dialer in front of sim1 and sim2? If you are able to call through jio4g voice app. Follow steps from starting like deleting .jio4g voice folder and all that. These were tested personally by me in RR . If nothing works I better recommend you to flash 19s eui then clean flash lineage latest rom ( for bugs report to rom's threads) don't try to flash any other bootloader or modem files. As @codeworkx also mentioned that lineage is nothing to do with bootloader or modem. Note - MM have issues but nougat don't.
veer.killerboy said:
Did you tried these workaround? Can you get volte icon in dialer in front of sim1 and sim2? If you are able to call through jio4g voice app. Follow steps from starting like deleting .jio4g voice folder and all that. These were tested personally by me in RR . If nothing works I better recommend you to flash 19s eui then clean flash lineage latest rom ( for bugs report to rom's threads) don't try to flash any other bootloader or modem files. As @codeworkx also mentioned that lineage is nothing to do with bootloader or modem. Note - MM have issues but nougat don't.
Click to expand...
Click to collapse
it didnt work.
thereis no .jio4gvoice folder i checked even in hidden files and root explorer.
can you direct me to any tutorial video?
Nykenztron said:
it didnt work.
thereis no .jio4gvoice folder i checked even in hidden files and root explorer.
can you direct me to any tutorial video?
Click to expand...
Click to collapse
What is your apn?
Nykenztron said:
it didnt work.
thereis no .jio4gvoice folder i checked even in hidden files and root explorer.
can you direct me to any tutorial video?
Click to expand...
Click to collapse
Try other JIO sim from a VoLTE supported phone.
OR
Put your JIO sim in other phone which have VoLTE working then put it back to your phone, try both method because this helped me sometimes.
Hello! I had the problem that the only settings to prefer LTE was CDMA + LTE/EvDo on my Huawei Y6 L-21.
Everytime i chose it, my provider connection was lost and the IMEI deleted. Only after flashing the stock ROM i got my IMEI (and the connection) back. I searched on the internet and found this little workaround / fix:
Using the Dialer USSD code Exploit
This is another easy method for setting 3G/4G only mode on Android devices. It is as easy as dialing some set of USSD codes on your phone dialer.
To force LTE/TDSCDMA/WCDMA only mode on android devices via the USSD code exploit, you’ll need complete the following steps.
Step1: Dial *#*#4636#*#*, on your phone dialer and follow after the pop-up window’s options.
Step2: Click on Phone information1 ==> set preferred network type to complete the LTE/TDSCDMA/WCDMA only mode settings.
Thats it!
Source: https://www.3ptechies.com/force-wcdma-mode-android.html
Greetings,
AenimaEx
PS: I wanted to create this thread in the development forum, but i haven't enough posts.
Now no more volte issue after reboot
The permanent volte fix tricks are available
This trick is working all eui versons
like :19s,20s,23s,26s,28s etc
Watch this video till last & i am sure your volte will be permanent
this video is in Hindi language
if you don't know hindi then i have added English subtitle also...
video link: https://www.youtube.com/watch?v=BmIQudeAHuI
Thank you for sharing this tip. This works very well for me and saved me the pain of enabling Volte every time i restarted the phone. Thank you again
Hiii guys ....now u can enable permanent volte in leeco le1s eco ...just open engineering mode by (*#*#3646633#*#*) and ...
1) select IMS >Common>operator code >volte operator free test
2)mncmcc check>off
3) open call>select 2nd option>untick 1and 3 option.
Now you can see HD icon at top...if u can't then go to engineering mode again and open ims then registration and search for ims_roaming_mode and enable it......
Congrats.. you've enabled volte permanently...
?
mayank07 said:
Hiii guys ....now u can enable permanent volte in leeco le1s eco ...just open engineering mode by (*#*#3646633#*#*) and ...
1) select IMS >Common>operator code >volte operator free test
2)mncmcc check>off
3) open call>select 2nd option>untick 1and 3 option.
Now you can see HD icon at top...if u can't then go to engineering mode again and open ims then registration and search for ims_roaming_mode and enable it......
Congrats.. you've enabled volte permanently...
?
Click to expand...
Click to collapse
Thq for information..
No incoming call working.. hd icon available.. outgoing works..
mayank07 said:
Hiii guys ....now u can enable permanent volte in leeco le1s eco ...just open engineering mode by (*#*#3646633#*#*) and ...
1) select IMS >Common>operator code >volte operator free test
2)mncmcc check>off
3) open call>select 2nd option>untick 1and 3 option.
Now you can see HD icon at top...if u can't then go to engineering mode again and open ims then registration and search for ims_roaming_mode and enable it......
Congrats.. you've enabled volte permanently...
?
Click to expand...
Click to collapse
it;s not working at alll..
The following worked for me.
1. Clean Flash G935UUEU4BQD2 firmware via ODIN.
2. Install all OTAs.
3. Install QuickShortcutMaker to Enable VoLTE.
4. Once you have installed QuickShortcutMaker, find and launch IMS Settings.
5. Goto IMS Service Switch -> Enable MMTEL Switch, VoLTE, VoLTE-Video & SMS over IP.
6. Make sure you have JIO IMS Profile under IMS Profile and ISIM is set to True under ISIM Info.
7. Add a new IMS APN with the following and save (this will not be shown).
Name ims
APN ims
Type ims8. Switch to Flight mode and back to normal.
9. Note that this will not show VoLTE symbol in the status bar but you can make/receive Calls & Sms without Jio4G app.
When i click on "Try" it shows " you don't have permission to open this. Any idea how to fix this?