My Lenovo P1ma40 Vibe stuck in a boot loop
I have no Custom Recovery installed, everything is original. I have changed my Boot Animation and rebooted my phone, but unfortunately, it stuck in a Boot Loop(never-ending). And, I haven't made any Backups.
I have many important data stored on my phone, so can't go with Factory Reset. I also tried to replace the "bootanimation.zip" with ADB, but it shows :
List of devices attached
But, then shows nothing, I then reinstalled the driver from Device Management Window(on reading a few answers). But, all my efforts were useless.
Since I have no Custom Recovery installed, I couldn't clear my Dalvik Cache as well. Can I do something to save my Phone and Data as well? I guess if I could replace the custom boot animation with the original, my phone will be saved.
Thanks in advance!!!
PLEASE HELP ME OUT
Related
Bottom half of the screen is cracked which makes it very difficult to " swipe to" do anything in TWRP. I locked my device and was unable to unlock with backup pin because the keyboard does not function properly. So I rebooted into recovery and accidentally wiped Calvin Cache, System, Data, Internal Storage and Cache. Rebooted phone and it's stuck in a boot loop. I tried using adb but I could not get it to swipe into adb sideload. I found that connecting the phone to my PC does open up /SDCARD/TWRP but there are no other folders in /SDCARD. I moved a ROM from my PC to the TWRP folder and was able to flash it but got stuck in boot loop. Tried flashing a different ROM and it shows a new loading screen but still stuck in boot loop. No other folders are being created to SDCARD.. Haven't had this pphone for more than a week.... Was thinking I could maybe flash a non touch TWRP or CWM to avoid having to swipe to get things done and use the hardware keys.. but why is it being stuck in boot loop after it says it successfully flashed the ROM.
I did flash the 30b file it says to flash prior to flashing the 2 custom lollipop ROMs in the tmo dev forum. Any help, links, advise would be much appreciated. Thanks.
Yesterday I tried to get rid of the ugly green UI on the TicWatch E following https://forum.xda-developers.com/smartwatch/other-smartwatches/ticwatch-e-chinese-version-ticwear-t3781183 . It worked, and my watch looked beautiful. But Bluetooth didn't work correctly. This wasn't a new issue, as the very first day I got the watch, I had the same issue. I tried to reboot, and many other solutions but had to reset like the first time. This time, it booted into TWRP as I had rooted my watch. I proceeded as normal, wiping the user data partition and cache, and rebooting. This time, the watch didn't reboot but went into TWRP instantly. I tried to reboot a couple of times, but ended up in TWRP every time. So I decide to do the most idiotic thing: try to reset again. This time, the watch simply shut off and dint respond to pressing the button. No sound, no vibration, nothing. Thankfully, it showed up in Mediatek flashing tool, so I followed https://forum.xda-developers.com/smartwatch/other-smartwatches/ticwatch-e-chinese-version-ticwear-t3781183 and got it to boot up. I messed up in flashing the userdata.img as well, but I doubt itll have any consequences as I then erased that partition using fast boot. Now, it has been showing the weird circle-throwing-ball animation for the last 4 hours.
For anyone finding this thread, this 7z worked for me
mega.nz/#!tw4hEZyA!xZD7RkSvnuXKcOayeHSvU3DMUat_NGLi0WI3nwIGU1A
Model WF12066
AutismicPootatoe said:
Yesterday I tried to ...
Click to expand...
Click to collapse
drive.google.com/open?id=1cLp_ALZhG-xdqd3fSj5xD7xj5UWfz95p
To explain more, that previous link was for android 5. It got the watch up and booting again. I found an Android 7 ROM on XDA, spliced in the img files and that booted too. Managed to get into TWRP and load my backups. Rerooted and enabled the black menus.
Above is a dump from my ticwatch e after all is said and done (except for userdata, that's still from the same link from above). The recovery is TWRP, system and boot are my restores from TWRP (running oreo), oem is preserved (to keep my oem.prop changes). The rest of the img files are from that mega link above (filename TicwearToAndroidWear.7z). Note: I haven't tested it, but if my SP Flash reading skills need some work, you should be able to replicate my steps ( download TicwearToAndroidWear.7z, replace recovery with TWRP, splice in the boot, system, userdata from forum.xda-developers.com/smartwatch/other-smartwatches/rom-kernel-t3786600, then find a TWRP backup to restore from. I can probably provide my boot and system WIN files if my img files don't work.
Need Help!!!!
I cleared the cache from Stock recovery (which I do regularly) after that the phone is stuck in the boot at Zenfone logo (dots moving). However it does ask for the password before that and every thing works there, after that it is stuck there forever, nothing happens.
Things I have already tried:
1) Flashing Stock Rom using the Stock Recovery
2) Clearing the Cache again
3) Flashing the updated Stock Rom (Pie)
Able to boot in to recovery and fastboot mode, however bootloader is LOCKED and ADB is DISABLED as well.
Is there any way to recover the data from the phone? It is important for a legal case, and I was not in the position to take the backup, sorry for that.
It would be very greatfull if some once can help me recover this important data or start the phone.
Or should I just go ahead and factory reset the phone?
Hey,
I have a moto e4 flashed with dotOS and TWRP, it ran out of battery yesterday, and on reboot refused to boot into the OS. My first reflex was to try booting into recovery, i managed to get into fastboot, but when i try to enter recovery it freezes on the TWRP splash screen.
I tried to reflash it, and although fastboot reports a successful reflash, It still freezes at the splash screen. I also tried to use the fastboot boot command to boot the recovery directly from memory, unsuccessfully.
For information, exact model number is XT1762.
If anyone has any ideas or experience with this issue i'd really appreciate some help !
Thanks
jman6495 said:
Hey,
I have a moto e4 flashed with dotOS and TWRP, it ran out of battery yesterday, and on reboot refused to boot into the OS. My first reflex was to try booting into recovery, i managed to get into fastboot, but when i try to enter recovery it freezes on the TWRP splash screen.
I tried to reflash it, and although fastboot reports a successful reflash, It still freezes at the splash screen. I also tried to use the fastboot boot command to boot the recovery directly from memory, unsuccessfully.
For information, exact model number is XT1762.
If anyone has any ideas or experience with this issue i'd really appreciate some help !
Thanks
Click to expand...
Click to collapse
You need to repair your /data
Caution All your Data will be lost. Get a Backup first of all!
1) Go to wipe option in twrp.
2) Select Advanced wipe
3) Tick on to Data and Select Repair or Change file system option.
4) Click on Change file system.
Most of the rom support ext4. but in this time it gave some error.
5) Change the data system to exFAT option and re change option to EXT4.
6) That"s it bro :good::good::good:
JOIN IN OUR TELEGRAM GROUP FOR MORE SUPPORTS AND NEW CUSTOM ROM LINKS.
Hi,
I have been using my P Smart (FIG-LX1) for a while with LineageOS 16 and decided to move on to Android 10. Installed LineageOS 17.1 (found it on this forum) and pph-Magisk 20.3 for root - it did work, but the system was unstable so i decided to try AOSP 10.0 instead. I entered TWRP, wiped cache,dalvik,system and data, flashed the ROM, gapps etc. It was advised to now flash stock recovery and use it to do a factory reset - and now i'm stuck here.
After flashing the recovery_ramdisk img the phone stopped being able to enter any recovery at all. The system itself does not boot (stuck on the "Your device has been unlocked (...) Your device is booting now..." screen forever), the recovery never appears (previously in the start screen with 'unlocked device' warning it used to suggest pressing volume UP to enter recovery, now it only shows "Your device is booting now"). As i can still access fastboot, I tried flashing TWRP again - the TWRP splash screen does appear, but the phone gets stuck on it. Also tried flashing another system's img - nothing changed.
Is there anything I can do or did i just brick it completely?
Thanks for help!
SOLVED:
Apparently running fastboot erase on system and userdata partitions made me able to boot into recovery/erecovery again. I do have another problem now, but it's not connected with this one so I will create another thread for that.
Could you try help me? I can't even get ADB to work anymore