Just bought a 7x off swappa for my wife and it has the bootloader unlocked but not rooted, with TWRP as recovery and it still has the November(b101) update so it hasn't been updated. What would be the best way to update it to the latest firmware as I don't want to brick it since I can't find any fix, it's model Bnd-L24.... Any help would be most welcome thanks all
Ultraman666 said:
Just bought a 7x off swappa for my wife and it has the bootloader unlocked but not rooted, with TWRP as recovery and it still has the November(b101) update so it hasn't been updated. What would be the best way to update it to the latest firmware as I don't want to brick it since I can't find any fix, it's model Bnd-L24.... Any help would be most welcome thanks all
Click to expand...
Click to collapse
You can't install an ota with TWRP as your recovery. You'd have to flash the stock recovery
XandeR180 said:
You can't install an ota with TWRP as your recovery. You'd have to flash the stock recovery
Click to expand...
Click to collapse
So I can flash the stock recovery thru twrp right?
Ultraman666 said:
So I can flash the stock recovery thru twrp right?
Click to expand...
Click to collapse
Uhhh not that I know of. Only method I'm aware of is flashing through Fastboot mode. Not sure about flashing through TWRP
XandeR180 said:
Uhhh not that I know of. Only method I'm aware of is flashing through Fastboot mode. Not sure about flashing through TWRP
Click to expand...
Click to collapse
Ok cool I'll research some more for the adb method
Ultraman666 said:
Ok cool I'll research some more for the adb method
Click to expand...
Click to collapse
It's really simple. If you flashed TWRP to your phone via the fastboot method, it's almost the same procedure to get it back. You just need to get the recovery images for the Honor 7x (since there's none available for the Mate SE. They're pretty much identical, though).
XandeR180 said:
It's really simple. If you flashed TWRP to your phone via the fastboot method, it's almost the same procedure to get it back. You just need to get the recovery images for the Honor 7x (since there's none available for the Mate SE. They're pretty much identical, though).
Click to expand...
Click to collapse
That's my issue I have no idea how they installed TWRP, since I bought it used I want to make sure I don't brick it ?
Ultraman666 said:
That's my issue I have no idea how they installed TWRP, since I bought it used I want to make sure I don't brick it ?
Click to expand...
Click to collapse
http://www.desinerd.co.in/how-to-huawei-mate-se-root-twrp-recovery/
Follow the procedure on this site, but instead of TWRP recovery, use the Honor 7x Stock recovery. I'll see if I can find there I found mine but if I can't I'll just upload the ones I have
XandeR180 said:
http://www.desinerd.co.in/how-to-huawei-mate-se-root-twrp-recovery/
Follow the procedure on this site, but instead of TWRP recovery, use the Honor 7x Stock recovery. I'll see if I can find there I found mine but if I can't I'll just upload the ones I have
Click to expand...
Click to collapse
Thanks bro much appreciated
Ultraman666 said:
Thanks bro much appreciated
Click to expand...
Click to collapse
No problem. If you have anything specific you need help with, feel free to ask
XandeR180 said:
No problem. If you have anything specific you need help with, feel free to ask
Click to expand...
Click to collapse
Just let me know when you have the files it the site, and if I need anything else I will ask. Huge help thanks
Ultraman666 said:
Just let me know when you have the files it the site, and if I need anything else I will ask. Huge help thanks
Click to expand...
Click to collapse
Couldn't find where I specifically got these from so I put them up myself.
https://drive.google.com/open?id=1NF-IQD4SBNyrBXbpWeqPvvju2XS7pYvs
When you get to the step where it has you flash the recovery image, you gotta do it a little differently
"fastboot flash recovery recovery.img"
then
"fastboot flash recovery2 recovery2.img"
make sure they're both in the same folder and that you open up a cmd prompt in that folder (shift + right click, then "open command prompt here"
XandeR180 said:
Couldn't find where I specifically got these from so I put them up myself.
https://drive.google.com/open?id=1NF-IQD4SBNyrBXbpWeqPvvju2XS7pYvs
When you get to the step where it has you flash the recovery image, you gotta do it a little differently
"fastboot flash recovery recovery.img"
then
"fastboot flash recovery2 recovery2.img"
make sure they're both in the same folder and that you open up a cmd prompt in that folder (shift + right click, then "open command prompt here"
Click to expand...
Click to collapse
Awesome thanks I will let you know how it goes, again much appreciated
Ultraman666 said:
Awesome thanks I will let you know how it goes, again much appreciated
Click to expand...
Click to collapse
Before proceeding take a complete nandroid backup.
It will help you in case device is bricked.
Also backup system image through adb
miststudent2011 said:
Before proceeding take a complete nandroid backup.
It will help you in case device is bricked.
Also backup system image through adb
Click to expand...
Click to collapse
Ya planned on backing up first just incase, didnt think about the system image good call!! thanks much
Ok successfully removed twrp and stock recovery is there..... I have tried to enter Huawei erecovery to download latest version and recovery but i get this error after its connected to the wifi, getting package info from server..... Getting package info failed? How do I update the phone?
That's because there's no stock ROMs on the Huawei server for the BND-L24. You have to be a little bit patient for the release.
Sidenote: If you are willing to assist. Can you do myself and a few others on this forum a favour by kindly doing a full backup of your L24 and share for the benefit of us who bricked ours. Would greatly appreciate it
wisdomzw said:
That's because there's no stock ROMs on the Huawei server for the BND-L24. You have to be a little bit patient for the release.
Sidenote: If you are willing to assist. Can you do myself and a few others on this forum a favour by kindly doing a full backup of your L24 and share for the benefit of us who bricked ours. Would greatly appreciate it
Click to expand...
Click to collapse
Ok didn't know there wasn't any OTA's for this version
So the November security patch is the latest? If so that's scary
Sure I will do a full backup when I get a sec....
Ultraman666 said:
Ok didn't know there wasn't any OTA's for this version
So the November security patch is the latest? If so that's scary
Sure I will do a full backup when I get a sec....
Click to expand...
Click to collapse
1 March is the latest security patch but only if you signed up for the beta and got the OTA pushed to you. Thanks, will await your backup ?
XandeR180 said:
Couldn't find where I specifically got these from so I put them up myself.
https://drive.google.com/open?id=1NF-IQD4SBNyrBXbpWeqPvvju2XS7pYvs
When you get to the step where it has you flash the recovery image, you gotta do it a little differently
"fastboot flash recovery recovery.img"
then
"fastboot flash recovery2 recovery2.img"
make sure they're both in the same folder and that you open up a cmd prompt in that folder (shift + right click, then "open command prompt here"
Click to expand...
Click to collapse
By chance do you have TWRP 3.1.1 openkirin img you can send me, the one in The TWRP thread isn't working I need to root this thing thanks
Related
Hello, after two weeks with my OPT I've decided to sell it, I don't like it.
My OPT has Unlocked Bootloader, root and TWRP. I would like to know how can I restore it like it comes from factory (Locked bootloader, unroot and stock recovery)
Thanks everyone.
There are quite a few tutorials on this, i think there is one here also (sorry cant post links), otherwise there is on the official forum on Oneplus website. IF you need video tutorial search for TheUnlockr on YT they posted a tutorial yesterday. Best of luck.
Ok thank you. It's done.
nathebest said:
Ok thank you. It's done.
Click to expand...
Click to collapse
can you say how you did it? i know i can flash the stock Oxygen file but i am having no luck finding the stock recovery so i can replace TWRP.
Rattles said:
can you say how you did it? i know i can flash the stock Oxygen file but i am having no luck finding the stock recovery so i can replace TWRP.
Click to expand...
Click to collapse
This vvv
iterva said:
There are quite a few tutorials on this, i think there is one here also (sorry cant post links), otherwise there is on the official forum on Oneplus website. IF you need video tutorial search for TheUnlockr on YT they posted a tutorial yesterday. Best of luck.
Click to expand...
Click to collapse
Of course, after you have flashed stock OxygenOS in TWRP, you wipe data/cache and click reboot system. TWRP ask you to swipe to keep TWRP or you click on Not Disable. Just click on it and the stock recovery is back.
For the bootloader, start the phone on fastboot mode (VOL UP+POWER) and type "fastboot oem lock" in a terminal window.
nathebest said:
Of course, after you have flashed stock OxygenOS in TWRP, you wipe data/cache and click reboot system. TWRP ask you to swipe to keep TWRP or you click on Not Disable. Just click on it and the stock recovery is back..
Click to expand...
Click to collapse
that's the problem, it never asked me to swipe to keep twrp. it just flashed OxygenOS but kept the recovery. oh well, all good now!
nathebest said:
TWRP ask you to swipe to keep TWRP or you click on Not Disable. Just click on it and the stock recovery is back.
Click to expand...
Click to collapse
This is available only on the unofficial TWRP.There's no such choice in the official one.
Tapped from my ❶+❷
vaisakh7 said:
This is available only on the unofficial TWRP.There's no such choice in the official one.
Tapped from my ❶+❷
Click to expand...
Click to collapse
Ok, I didn't know that.
v7 said:
This is available only on the unofficial TWRP.There's no such choice in the official one.
Tapped from my ❶+❷
Click to expand...
Click to collapse
I have Official TWRP how do i go back to stock recovery ?
nathebest said:
Ok thank you. It's done.
Click to expand...
Click to collapse
Hi. Are you able to successfully relock your bootloader? Because I've read some people who relocked the bootloader just bricked the device.
Same situation, though in my case, Im returning the device. Does anybody know if I even have to relock the bootloader before I return it? Its unlocked and rooted with official twrp recovery.
From what I have read so far, relocking the bootloader will brick the device if one does not restore the stock recovery first. But am not 100% sure this is right. Also, I saw a few people posting the stock recovery, but its unclear what version of the device the recovery is for. If Im not mistaken, there are three versions of the hardware, Chinese, Europe (and India) and US. Is it okay to flash a stock recovery from a different region? If not, is there any other way to go back to stock recovery before bootloader relock?
UPDATE: Scratch that, I just had a chat with OnePlus Support and was told that when returning a device to seller, there is no need to unroot and relock the bootloader. If anything, trying to do so might brick the device and kill the warranty, but unlocked and rooted, warranty still applies, and its perfectly fine to return as is.
So I flashed the 7.1.1 update and everything was fine. I then tried to root through TWRP with the most recent version of recovery and and SuperSu and when I went to reboot it would get to the "Google" splash screen and go back to the warning. I then tried to restore to my Nandroid that I made right before the 7.1.1 flash but it does the same thing. I ended up doing a factory reset, still looping. I tried flashing an old firmware but it still would loop. I got desperate and did a full wipe and then flashed the old firmware from September's update but it still will not boot. I'm a long time lurker I just don't post much. Any help will be appreciated. Thanks in advance!
http://forum.xda-developers.com/nexus-6p/help/figure-brick-t3450921/page32
Welcome to the club
jamaniek said:
http://forum.xda-developers.com/nexus-6p/help/figure-brick-t3450921/page32
Welcome to the club
Click to expand...
Click to collapse
Ahh, great. I tried searching to see if anyone else posted anything, couldn't find it.
jamaniek said:
http://forum.xda-developers.com/nexus-6p/help/figure-brick-t3450921/page32
Welcome to the club
Click to expand...
Click to collapse
Wait are you able to get into Recovery?
ChazLanier said:
Wait are you able to get into Recovery?
Click to expand...
Click to collapse
Nope. And so are other folks.
But if you can, there's still hope to save your device.
What version of twrp were you using?? Also what company makes the storage (not memory) on your device?
jamaniek said:
Nope. And so are other folks.
But if you can, there's still hope to save your device.
Click to expand...
Click to collapse
I can still get into recovery. I just can't get it past the Google splash screen.
ChazLanier said:
I can still get into recovery. I just can't get it past the Google splash screen.
Click to expand...
Click to collapse
Have you tried installing custom ROM, instead of a stock one?
And tell us what @ArminasAnarion asked for. There may be a pattern here. :good:
I haven't tried a custom ROM. I'll try that if I get any down time at work. Also, I'll check for you @ArminasAnarion in a bit.
Might be a noob question, but how do I get the custom rom files over to my phone to flash in recovery?
ChazLanier said:
Might be a noob question, but how do I get the custom rom files over to my phone to flash in recovery?
Click to expand...
Click to collapse
Well if you cant access twrp then your not flashing anything; did you try downloading the latest Nexus 6p factory image and using adb to flash it?? If you need help with that I can lay it out for you. Also there was an efs partition issue with twrp 3.0.2-1 and down so make sure your twrp is 3.0.2-2!
ArminasAnarion said:
Well if you cant access twrp then your not flashing anything; did you try downloading the latest Nexus 6p factory image and using adb to flash it?? If you need help with that I can lay it out for you. Also there was an efs partition issue with twrp 3.0.2-1 and down so make sure your twrp is 3.0.2-2!
Click to expand...
Click to collapse
I can access TWRP. I haven't tried the latest factory image, only September's release. I just tried a custom rom and it gets to the Google screen but then loops just after the G starts to animate.
ChazLanier said:
I can access TWRP. I haven't tried the latest factory image, only September's release. I just tried a custom rom and it gets to the Google screen but then loops just after the G starts to animate.
Click to expand...
Click to collapse
Make sure your using twrp 3.0.2-2; and download the latest factory image for the Nexus 6p (NBD90X) and use adb (fastboot) to flash that whole thing. Extract the files to your android sdk platform tools folder then run the flash-all.bat file. (If you are using a 64gb or 128gb device DONT DO THIS) Only do this with the 32gb model. If its a 64 or 128 model go here -> http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928 and go to sub section 10. How To Flash The Factory Images (And Return To Stock) (On post two) and follow that.
ArminasAnarion said:
Make sure your using twrp 3.0.2-2; and download the latest factory image for the Nexus 6p (NBD90X) and use adb (fastboot) to flash that whole thing. Extract the files to your android sdk platform tools folder then run the flash-all.bat file. (If you are using a 64gb or 128gb device DONT DO THIS) Only do this with the 32gb model. If its a 64 or 128 model go here -> http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928 and go to sub section 10. How To Flash The Factory Images (And Return To Stock) (On post two) and follow that.
Click to expand...
Click to collapse
Downloading the image now. I'm familiar on how to flash stock images, they're how I usually do all of my updates.
ChazLanier said:
Downloading the image now. I'm familiar on how to flash stock images, they're how I usually do all of my updates.
Click to expand...
Click to collapse
Oh okay cool! Good luck!
ArminasAnarion said:
What version of twrp were you using?? Also what company makes the storage (not memory) on your device?
Click to expand...
Click to collapse
Samsung storage, and I thought I was on -2 but it seems like I was on -1.
ArminasAnarion said:
Oh okay cool! Good luck!
Click to expand...
Click to collapse
Newest image didn't work either..
Have you tried WugFresh's Nexus Root Toolkit? Not sure if it will work for your situation, but it has an option to restore to factory settings and unroot if you're soft-bricked or bootlooped. Might be worth a shot if everything else isn't working.
FWIW, I successfully updated to 7.1.1 NPF10C and rooted by using fastboot to flash bootloader, radio, boot, system, and vendor. Then used TWRP 3.0.2-2 to flash SuperSU 2.78 SR1. No issues.
Howie Dub said:
Have you tried WugFresh's Nexus Root Toolkit? Not sure if it will work for your situation, but it has an option to restore to factory settings and unroot if you're soft-bricked or bootlooped. Might be worth a shot if everything else isn't working.
Click to expand...
Click to collapse
No luck on this either.
I did factory reset my Moto G5 Plus, and now I am left with custom ROMs only. Where can I download the stock Motorola ROM for the Moto G5 Plus?
mstoic said:
I did factory reset my Moto G5 Plus, and now I am left with custom ROMs only. Where can I download the stock Motorola ROM for the Moto G5 Plus?
Click to expand...
Click to collapse
Check here: https://mirrors.lolinet.com/firmware/moto/potter/official/
Anyways you should always make backups in twrp :good:
tywinlannister7 said:
Check here: https://mirrors.lolinet.com/firmware/moto/potter/official/
Anyways you should always make backups in twrp :good:
Click to expand...
Click to collapse
Thanks a ton. I will surely backup everything right after installing TWRP from now on.
I'm on stock ROM NPN25.137-15, rooted with TWRP installed. Can I just upgrade it to NPN25.137-35 by downloading the zip from above link and flash it under TWRP?
anoop.ch said:
I'm on stock ROM NPN25.137-15, rooted with TWRP installed. Can I just upgrade it to NPN25.137-35 by downloading the zip from above link and flash it under TWRP?
Click to expand...
Click to collapse
I have the same questions are the linked files flashable in TWRP? My stock backup is rooted and now I can't play Pokemon GO. Just looking for the easiest way to unroot my stock rom. Thanks!
anoop.ch said:
I'm on stock ROM NPN25.137-15, rooted with TWRP installed. Can I just upgrade it to NPN25.137-35 by downloading the zip from above link and flash it under TWRP?
Click to expand...
Click to collapse
No Stock ROM can not be flashed via twrp, only the OTA zips can be flashed via stock Recovery. This is the link to the fastboot ROM.
emoney1219 said:
I have the same questions are the linked files flashable in TWRP? My stock backup is rooted and now I can't play Pokemon GO. Just looking for the easiest way to unroot my stock rom. Thanks!
Click to expand...
Click to collapse
As I mentioned above. Moreover you can flash UnSU and then root using Magisk. Magisk allows hiding root detection for Safetynet.
tywinlannister7 said:
No Stock ROM can not be flashed via twrp, only the OTA zips can be flashed via stock Recovery. This is the link to the fastboot ROM.
As I mentioned above. Moreover you can flash UnSU and then root using Magisk. Magisk allows hiding root detection for Safetynet.
Click to expand...
Click to collapse
Where would I find UnSU if you don't mind my asking?
emoney1219 said:
Where would I find UnSU if you don't mind my asking?
Click to expand...
Click to collapse
Everything is on xda. just search before posting
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
tywinlannister7 said:
Everything is on xda. just search before posting
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
Click to expand...
Click to collapse
Never knew UnSU existed, thanks for the link. It seems to have worked, thanks.
Can't lock the bootloader
mstoic said:
Thanks a ton. I will surely backup everything right after installing TWRP from now on.
Click to expand...
Click to collapse
Hi. I am not able to lock the bootloader. As soon I enter the command
Code:
fastboot oem lock
CMD gives me the error "Still require signed boot.img"
tywinlannister7 said:
Check here: https://mirrors.lolinet.com/firmware/moto/potter/official/
Click to expand...
Click to collapse
Hi,
Where is the stock firmware for the EU version? Moto G5 Plus XT1685 3/32GB
tywinlannister7 said:
Check here: https://mirrors.lolinet.com/firmware/moto/potter/official/
Anyways you should always make backups in twrp :good:
Click to expand...
Click to collapse
Hi, i downloaded the zip file, but how do i install it? Can you point me to a tutorial or something?
Thank you
Hi, i followed this = https://forum.xda-developers.com/showpost.php?p=67031808&postcount=4
Got it
Thanks
pablofior said:
Hi, i downloaded the zip file, but how do i install it? Can you point me to a tutorial or something?
Thank you
Click to expand...
Click to collapse
Assuming that you have set up adb/fastboot drivers, extract all the rom files to that folder and type in the commands mentioned here :
https://pastebin.com/ZWTaWuyr
tywinlannister7 said:
Assuming that you have set up adb/fastboot drivers, extract all the rom files to that folder and type in the commands mentioned here :
https://pastebin.com/ZWTaWuyr
Click to expand...
Click to collapse
Thank you but i found here on XDA a tutorial to flash stock rom on G4 and it worked for me.
mstoic said:
Hi. I am not able to lock the bootloader. As soon I enter the command
Code:
fastboot oem lock
CMD gives me the error "Still require signed boot.img"
Click to expand...
Click to collapse
I have the same issue.
I also get these errors:
http://imgur.com/a/mRKEz
Is there a way to relock the bootloader?
tywinlannister7 said:
Assuming that you have set up adb/fastboot drivers, extract all the rom files to that folder and type in the commands mentioned here :
https://pastebin.com/ZWTaWuyr
Click to expand...
Click to collapse
I unlocked the bootlader and rooted the phone before giving it to my wife. During that whole process, fastboot had no problems recognizing the phone (obviously). Then my wife tried to update via the OTA which got her stuck in TWRP. I'd like to reflash the stock ROM, but the problem I have is I can't use fastboot to do commands line by line (as shown in the link above) since "fastboot devices" doesn't show my phone anymore. I was able to get her going on a custom ROM for now, but I'd like to put her back on the stock ROM so we won't encounter this problem again. I've reinstalled the Motorola driver several times, but no luck. ADB has no problems recognizing the phone when in recovery. One thing that happened recently was a big update to Windows 10, but I'm not sure if that is the reason for my fastboot issues.
I intend to give it a go on another computer once I get the phone again from the wife, but any advice until then would be appreciated.
Thanks. I've installed a custom ROM but im not happy with the results (specially the poor camera performace). Will this "undo" everything? I mean, stock apps, stock widgets, etc etc? (don't care if the bootloader stays unlocked and the warning moto message while booting). I know this may be a stupid question, but like Homer would say: "it's my first day"
manos78 said:
Hi,
Where is the stock firmware for the EU version? Moto G5 Plus XT1685 3/32GB
Click to expand...
Click to collapse
Did u find it?
WiteFlash said:
I intend to give it a go on another computer once I get the phone again from the wife, but any advice until then would be appreciated.
Click to expand...
Click to collapse
Just a follow up to my previous post, I tried uninstalling/reinstalling the Motorola driver and ADB on the original computer, but for some reason it still won't "see" the phone in fastboot. I was able to install ADB/Fastboot and the Motorola driver on a separate computer (also Windows 10) to get fastboot to recognize the phone so I could issue commands to reinstall the stock firmware. I noticed, though, that the following commands FAILED when I entered them:
fastboot erase customize
fastboot erase clogo
I'm not sure what those were for, but the phone seems to be working fine on the stock firmware now.
I flashed the one in the retail folder and it says ret-EU in the settings so flash that one
This is the same version as here. I just added more langage xml files so now has 17 languages.
unzip file and flash in bootloader mode
Code:
fastboot flash recovery recovery.img
You can rename .img file as you want.
or use SPFlashTool.
Works on MYA-L02_L03_L11_L13_L22_L23_L41 models
Note: twrp-3.2.1 now available here
Credits:
@teamwin
@SGS3_0 (for original link)
Hello, I only load up the twrp menu but the touch screen does not work, I have a Huawei mya-l03. I hope you can fix it. Thanks to the programmers for taking their time.
Juan Centi said:
Hello, I only load up the twrp menu but the touch screen does not work, I have a Huawei mya-l03. I hope you can fix it. Thanks to the programmers for taking their time.
Click to expand...
Click to collapse
I am not developer of this twrp, but the mya-l03 has same kernel as mya-l11 so*it should work!
Just try re-installing twrp to see if it rectifies the issue.
Will I get the official OTA security updates after the root?
nicoX said:
Will I get the official OTA security updates after the root?
Click to expand...
Click to collapse
You will be notified but they will not install with twrp installed, afaik!
I received one recently but was unable to install it without reverting to stock recovery temporarily!
shanman-2 said:
You will be notified but they will not install with twrp installed, afaik!
I received one recently but was unable to install it without reverting to stock recovery temporarily!
Click to expand...
Click to collapse
Where can I download the stock recovery for Y6 2017 (MYA-L11) please?
seanbirkhead said:
Where can I download the stock recovery for Y6 2017 (MYA-L11) please?
Click to expand...
Click to collapse
You can get the full firmware here, get the SPflashtool here
shanman-2 said:
You can get the full firmware here, get the SPflashtool here
Click to expand...
Click to collapse
That's great thanks and thanks for the fast reply. Is there a simple guide anywhere for using spflashtool to flash the stock recovery or can it be done from command line (with adb etc.) ?
seanbirkhead said:
That's great thanks and thanks for the fast reply. Is there a simple guide anywhere for using spflashtool to flash the stock recovery or can it be done from command line (with adb etc.) ?
Click to expand...
Click to collapse
SPfashtool is fairly straight forward to use, you can always flash the stock recovery image from fastboot,
Code:
fastboot flash recovery recovery.img
Note: You will re-lock your bootloader flashing stock recovery!
TWRP for Huawei Nova Young MYA-L11
Hello, I'd like to know if this twrp is compatible with the Huawei Nova Young MYA-L11 and if i don't risk bricking my phone. Thank you
xtremegamer87 said:
Hello, I'd like to know if this twrp is compatible with the Huawei Nova Young MYA-L11 and if i don't risk bricking my phone. Thank you
Click to expand...
Click to collapse
Check the op.
your link not working give me another
Please
Here's the patched boot.img for OnePlus 8T Android 13 KB2005_11_F.13 and F.15
Bootloader must be unlocked
(Have the img on your PC)
Instructions:
1: Reboot to bootloader "adb reboot bootloader"
2: Run CMD "fastboot flash boot" ~name of img~
Profit!
You're now rooted.
I've also attached the stock boot.img just in case anyone wants it.
Boot - Google Drive
drive.google.com
Thank's
BobbyLynn said:
Here's the patched boot.img for OnePlus 8T Android 13 KB2005_11_F.13
Bootloader must be unlocked
(Have the img on your PC)
Instructions:
1: Reboot to bootloader "adb reboot bootloader"
2: Run CMD "fastboot flash boot magisk_patched-25200_575Sf.img"
You're now rooted.
I've also attached the stock boot.img just in case anyone wants it.
Boot - Google Drive
drive.google.com
Click to expand...
Click to collapse
what if there is ota update?
MevishL said:
what if there is ota update?
Click to expand...
Click to collapse
I highly doubt there'll be another OTA until next month. Check with the developer of the unofficial orange fox recovery, he'll most likely release a new version for A13. If not, I'll pull the boot.img and patch it again and post it here.
MevishL said:
what if there is ota update?
Click to expand...
Click to collapse
Nevermind he's already released a version for A13. Here it is
Thread '[RECOVERY][UNOFFICIAL] OrangeFox Recovery Project [OnePlus 8t / 9r] [13-Nov-2022]' https://forum.xda-developers.com/t/...ry-project-oneplus-8t-9r-13-nov-2022.4391139/
BobbyLynn said:
I highly doubt there'll be another OTA until next month. Check with the developer of the unofficial orange fox recovery, he'll most likely release a new version for A13. If not, I'll pull the boot.img and patch it again and post it here.
Click to expand...
Click to collapse
okay thx , much appreciated
BobbyLynn said:
Nevermind he's already released a version for A13. Here it is
Thread '[RECOVERY][UNOFFICIAL] OrangeFox Recovery Project [OnePlus 8t / 9r] [13-Nov-2022]' https://forum.xda-developers.com/t/...ry-project-oneplus-8t-9r-13-nov-2022.4391139/
Click to expand...
Click to collapse
what if i bricked my phone , how do i flash stock file. do i need to download it in oxygen updater , and then?
MevishL said:
what if i bricked my phone , how do i flash stock file. do i need to download it in oxygen updater , and then?
Click to expand...
Click to collapse
Lol don't tell me you've bricked it!!! You can probably flash the stock boot.img and that might fix it. Otherwise you'll have to use the msm tool to reflash the firmware.
BobbyLynn said:
Lol don't tell me you've bricked it!!! You can probably flash the stock boot.img and that might fix it. Otherwise you'll have to use the msm tool to reflash the firmware.
Click to expand...
Click to collapse
no i didn't ! i'm just scared i might brick it cuz oneplus is harder to deal with than my previous phones . thnks for helping
MevishL said:
no i didn't ! i'm just scared i might brick it cuz oneplus is harder to deal with than my previous phones . thnks for helping
Click to expand...
Click to collapse
Well if you're worried about bricking it then before you start making modifications, be sure to have the latest msm for it on your PC, and also take a full backup using Orange Fox recovery, and also have the stock boot.img on your PC. And if anything goes wrong just flash the stock boot.img. And if that doesn't fix it then restore the backup, and if that still doesn't work then you'll have to do a complete restore using a msm tool
BobbyLynn said:
Well if you're worried about bricking it then before you start making modifications, be sure to have the latest msm for it on your PC, and also take a full backup using Orange Fox recovery, and also have the stock boot.img on your PC. And if anything goes wrong just flash the stock boot.img. And if that doesn't fix it then restore the backup, and if that still doesn't work then you'll have to do a complete restore using a msm tool
Click to expand...
Click to collapse
BobbyLynn said:
Well if you're worried about bricking it then before you start making modifications, be sure to have the latest msm for it on your PC, and also take a full backup using Orange Fox recovery, and also have the stock boot.img on your PC. And if anything goes wrong just flash the stock boot.img. And if that doesn't fix it then restore the backup, and if that still doesn't work then you'll have to do a complete restore using a msm tool
Click to expand...
Click to collapse
now u made it clear in my head , thx for all
MevishL said:
now u made it clear in my head , thx for all
Click to expand...
Click to collapse
No problem. If you run into any problems just let me know and I'll do what I can to figure out the simplest solution
I flash this boot.img and work like a charm easy root. Don't forget to post boot for next updates for KB2005. Thanks
Can these instructions be used for the KB2007?
kevinco1 said:
Can these instructions be used for the KB2007?
Click to expand...
Click to collapse
If it's Android 13 11_F.13 then yes. But Orange Fox has a working recovery for A13 on our phone. So you can always flash Magisk that way if you want
MrOnizuka said:
I flash this boot.img and work like a charm easy root. Don't forget to post boot for next updates for KB2005. Thanks
Click to expand...
Click to collapse
As long as I have this phone I'll continue to post the patched boot.img after each update
BobbyLynn said:
As long as I have this phone I'll continue to post the patched boot.img after each update
Click to expand...
Click to collapse
It is your time to shine again, good sir F.15 is upon us!
Thank you, kindly.
BobbyLynn said:
As long as I have this phone I'll continue to post the patched boot.img after each update
Click to expand...
Click to collapse
i have kb2005 but when i install ota update f.15 , it says installation failed at 26% . before that , i fastboot flashed stock boot.img. What should i do ?
Marduc said:
It is your time to shine again, good sir F.15 is upon us!
Thank you, kindly.
Click to expand...
Click to collapse
Thanks for reminding me. I'll upload the new boot.img shortly
MevishL said:
i have kb2005 but when i install ota update f.15 , it says installation failed at 26% . before that , i fastboot flashed stock boot.img. What should i do ?
Click to expand...
Click to collapse
You did flash unmodified boot.img before trying to update? Well, honestly idk why it won't install. Maybe you should try a different method of installing the update, like manually installing it