Related
I may be doing something stupid, but I've tried various options...
I had an original 5.1.1 build that I let OTA to 6.0. Everything was working fine. I wanted to root, so I installed TWRP... and then the machine wouldn't reboot; it stuck at the "powered by Android" screen and never went into the standard animation screens. I could reboot into TWRP recovery easily enough and using that I could see the filesystem data, but the OS wouldn't boot.
So I reflashed back to 5.1.1 (using http://www.andromods.com/download-files/xt1575-stock-firmware-moto-x-2015-pure-edition.html ), let that OTA to 6.0, installed TWRP... same result.
Third attempt; started at 5.1.1 then installed TWRP (which worked) and then did OTA to 6.0... but this went into a reboot loop.
(Of course during all this I've lost my configs, but I can rebuild that)
Has anyone been able to install TWRP onto an X-Pure 2015 that's running 6.0 ?
What TWRP version are you installing? Make sure it's 2.8.7.1 https://dl.twrp.me/clark/
Sent from my XT1575 using Tapatalk
Sorry, yes, I should have mentioned that; twrp-2.8.7.1-clark.img
Did you install TWRP as read only? I did this and now system recovery is overwriting TWRP and I have no idea how to get out of it.
I had the same problem a couple days ago and posted about it in the 'Android 6.0 Update rolling out! Pure Edition' thread:
"I keep running into a problem after doing the MM update when I flash TWRP (either 2.8.7.0 or 2.8.7.1) where it won't boot into system, just sits there where the animation part should start. Booted/rebooted fine a few times after finishing the MM update, even after flashing the unlocked bootloader logo fix, but as soon as I flash recovery it won't boot system. "
Tried it several times with both TWRP 2.8.7.0 and 2.8.7.1 with no success. Also tried sideloading the OTA per the manual steps in this thread but still couldn't boot to system. Only by already having TWRP installed on 5.1.1 am I able to flash a custom 6.0 ROM successfully. Haven't seen a really clear statement yet that someone has flashed TWRP on fully stock MM with no problem..
EVR_PR said:
Did you install TWRP as read only? I did this and now system recovery is overwriting TWRP and I have no idea how to get out of it.
Click to expand...
Click to collapse
First time I let /system be read-write and second time I let /system be RO. However this likely isn't related to recovery overwriting TWRP; it's documented that on first boot the OS may rewrite the recovery data meaning you'd need to install TWRP again.
Dahenjo said:
I had the same problem a couple days ago and posted about it in the 'Android 6.0 Update rolling out! Pure Edition' thread
...
Haven't seen a really clear statement yet that someone has flashed TWRP on fully stock MM with no problem..
Click to expand...
Click to collapse
Thanks; at least I know it's not me being stupid then (or if I am, then I'm not alone ).
sweh said:
First time I let /system be read-write and second time I let /system be RO. However this likely isn't related to recovery overwriting TWRP; it's documented that on first boot the OS may rewrite the recovery data meaning you'd need to install TWRP again.
Click to expand...
Click to collapse
I have flashed TWRP twice and even rebooted to recovery from recovery and system recovery still overwrites TWRP after booting to system.
Only way I can access TWRP is either flashing it or booting into from the fastboot folder using the fastboot boot command.
Doesn't matter what I do, the option for changing TWRP from read-write to read only doesn't show up anymore.
sweh said:
Thanks; at least I know it's not me being stupid then (or if I am, then I'm not alone ).
Click to expand...
Click to collapse
Well, at age 65 I do put my socks on backwards sometimes..... :silly:
Read on a fairly-detailed post that using adb to flash recovery and rebooting into it should actually work fine!
Could anyone confirm? Is it even possible?
P.S. I'm on XT1572 Indian stock 6.0, and very eager for twrp
I had the exact same problem. I used adb. Stuck on loading screen and then suddenly black. Not able to boot the phone. I'd like to make a nandroid and after that I'd like to use systemless root. If I'm correct, I'll still receive ota's while using systemless root.
Same for me. Returned to stock EU 5.1.1, got update, installed it. Later unlocked bootloader and installed latest TWRP. And now I am stuck on booting up image.
So stock Marshmallow cant be used with TWRP?
BooBzi said:
Same for me. Returned to stock EU 5.1.1, got update, installed it. Later unlocked bootloader and installed latest TWRP. And now I am stuck on booting up image.
So stock Marshmallow cant be used with TWRP?
Click to expand...
Click to collapse
That seems to be the case since I have yet to hear of anyone freshly setting up TWRP for clark/MXPE on purely stock MM without it failing to boot to system afterwards. If you already have TWRP on 5.1.1 you can install a custom MM ROM and then TWRP works normally (ie boots to system), but so far that's the only way I'm aware of to get it functional on MM.
I see you started another thread on this, which may help it get noticed, but maybe also post in the TWRP thread. I posted there on this issue over a week ago but have had zero response from OP, but if others keep doing so maybe that will help.
IMVHO, TWRP for MXPE isn't being supported well - this problem, the version being incorrect for several weeks causing confusion w/dozens of unnecessary posts (this alone could likely be fixed in 2 minutes), as well as the 'SD as internal storage' issue(s) which may be more involved but are still the type of thing those maintaining it are supposed to address. Even some acknowledgement that the issues are recognized and being worked on would be nice, but thus far not even that.
Dahenjo said:
That seems to be the case since I have yet to hear of anyone freshly setting up TWRP for clark/MXPE on purely stock MM without it failing to boot to system afterwards. If you already have TWRP on 5.1.1 you can install a custom MM ROM and then TWRP works normally (ie boots to system), but so far that's the only way I'm aware of to get it functional on MM.
I see you started another thread on this, which may help it get noticed, but maybe also post in the TWRP thread. I posted there on this issue over a week ago but have had zero response from OP, but if others keep doing so maybe that will help.
IMVHO, TWRP for MXPE isn't being supported well - this problem, the version being incorrect for several weeks causing confusion w/dozens of unnecessary posts (this alone could likely be fixed in 2 minutes), as well as the 'SD as internal storage' issue(s) which may be more involved but are still the type of thing those maintaining it are supposed to address. Even some acknowledgement that the issues are recognized and being worked on would be nice, but thus far not even that.
Click to expand...
Click to collapse
Thanks for reply, I did listen to you and post on TWRP thread.
Dahenjo said:
That seems to be the case since I have yet to hear of anyone freshly setting up TWRP for clark/MXPE on purely stock MM without it failing to boot to system afterwards. If you already have TWRP on 5.1.1 you can install a custom MM ROM and then TWRP works normally (ie boots to system), but so far that's the only way I'm aware of to get it functional on MM.
I see you started another thread on this, which may help it get noticed, but maybe also post in the TWRP thread. I posted there on this issue over a week ago but have had zero response from OP, but if others keep doing so maybe that will help.
IMVHO, TWRP for MXPE isn't being supported well - this problem, the version being incorrect for several weeks causing confusion w/dozens of unnecessary posts (this alone could likely be fixed in 2 minutes), as well as the 'SD as internal storage' issue(s) which may be more involved but are still the type of thing those maintaining it are supposed to address. Even some acknowledgement that the issues are recognized and being worked on would be nice, but thus far not even that.
Click to expand...
Click to collapse
I was on pure stock mm and sideloaded twrp without any issues. I use the twrp app (requires root) to reboot into recovery without any problems.
ccic2491 said:
I was on pure stock mm and sideloaded twrp without any issues. I use the twrp app (requires root) to reboot into recovery without any problems.
Click to expand...
Click to collapse
Hello, is it possible to get step by step tutorial?
Later will try on Style with stock MM.
Thanks!
ccic2491 said:
I was on pure stock mm and sideloaded twrp without any issues. I use the twrp app (requires root) to reboot into recovery without any problems.
Click to expand...
Click to collapse
Did you not use the Fastboot Install Method on the TWRP site? We are unable to reboot back into system after using this on stock MM, which always worked fine on stock LP. If you used a different method that worked could you please share what that was?
I am using twrp 2.8.7.1 on my Moto X Style XT1572 Asia retail without any trouble for past two weeks.
I normally flashed it using the fastboot and never ran into trouble.
gulshanstrider said:
I am using twrp 2.8.7.1 on my Moto X Style XT1572 Asia retail without any trouble for past two weeks.
I normally flashed it using the fastboot and never ran into trouble.
Click to expand...
Click to collapse
Just to confirm - when you flashed TWRP you were completely stock after installing the 6.0 OTA (not still on 5.1.1 before taking the OTA), correct?
Dahenjo said:
Just to confirm - when you flashed TWRP you were completely stock after installing the 6.0 OTA (not still on 5.1.1 before taking the OTA), correct?
Click to expand...
Click to collapse
Here is what I did:-
1) I was in Stock 5.1.1 (had unlocked bootloader)
2) I took the OTA.
3) Flashed the twrp 2.8.7.1 using fastboot
So yes I was completely stock 6.0 when I flashed the TWRP for MM
I do not know if this question has been brought up before, but I am in desperate need of an answer. I recently got my 6P and immediately proceeded to unlock the bootloader and flash TWRP to start loading custom roms. I decided to start use Pure Nexus with it's accompanying gapps package but when I go to reboot the device, I am stuck at the circles boot animation. I decide to try CM13 nightlies and the same problem occurs. After searching online for some time, I realize I needed to flash a SuperSU file from recovery that flashes a custom boot.img. I flash Version 2.66 and restart the device. After 5+ minutes on the boot screen, I decided I am stuck still. What do I need to do, I am unable to boot the device.
Thanks.
I'd use Nexus Root Toolkit to unbrick your phone just so that it is working to start with. Then follow the steps more closely for installing a rom. You'll be doing something wrong, I've had no issues!! Best of luck with this.
hmm I'm not sure. this is happening to me right now as I try to restore my backups... maybe has to do with twrp's system handling/mounting, but I just don't know.
I just updated to android 10 oxygen os 10 but can't seem to flash twrp the usual way anyone got some advice? I've saw some tutorials online about extracting boot.img patching with magisk then flashing twrp installer as a module. Is that the only way just now or has someone got an easier way ?
Cheers
Thanks for the replies, I am already on A10 and got the update from Oxygen Updater app. I am using the boot IMG from the update file and patching it through magisk however when I flash it through fastboot method the phone is constantly on the boot animation stage. The only way for me to boot my phone again is to flash the original boot image.
I saw others were having positive results using this method does anyone know why it might not be working for me even though I'm following the same process?
I had some problems with twrp and android 10, so I wouldn't recommend it. I personally wait for the official support for android 10 and then flash twrp.
I downloaded the recovery from here: https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482
And did this: https://forum.xda-developers.com/showpost.php?p=79489698&postcount=2538
But yeah, I still wouldn't recommend it. And I'm not sure if I did everything right. So it's your choice.
There is a pretty good way but you have to be coming from rooted 9.0.17. If you're already on 10 then I'm not sure. There is a parched boot img but I couldn't get everything working properly using it. That's probably my fault as I screwed up getting to A10 with decryptable twrp and magisk many times.
Thanks for the replies
Factory reset your phone from within stock recovery to get rid of any previous configuration. Then fastboot flash patched IMG again.
Evidently backup everything before on a computer
Hey guys,
first time posting here so i dont kow how to style the text, so sorry about that.
last time i rooted a phone was on my sony xperia sp , where all i had to do was to go to towelroot .com and click to root.
I tryed to root my OP6T yesterday, after some setbacks i managed to sucessfully do it.
I did it like this:
1. Downloaded full ROM of OOS 10.3.2,
2. copied the payload to a program called payload dumper that extracted the boot image.
3. Copied the boot image to the phone
4. opened Magisk manager and selected install from source where i chose the boot.img
5. it created a copy called magisk_patched.img
6. booted in fastboot
7. on my pc used the command prompt to "fastboot boot magisk_patched.img"
booted normally and i had root.
but then problem appeared
#Problem 1
everytime i rebooted my phone i would loose root and it would say Magisk not installed. To get it back i would need to perform step 7 again and it was not ideal to do that everytime i turned off my phone.
#Problem 2
While tryng to solve problem 1 i read that i needed to open magisk manager and "Install to Inactive Slot (After OTA)."
After doing that it rebooted but now it wont boot at all, even if i try to "fastboot boot magisk_patched.img" the cmd gives me error:
fastboot boot magisk_patched.img
downloading 'boot.img'...
OKAY [ 0.838s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.845s
now my phone is just sitting there i dont want to reset it again. it would be the 4th time that i need to set up my phone in 2 days, so im trying to see if there are alternatives.
If reset is really the only way, i read that with root you can make a full backup of your phone and then restore it. How to do that? can i do it in the situation im in?
How can i root my OP6T running OOS10.3.2, and keep it? Whats the right method bc the one i followed seemed flawed.
I also tried one that had TWRP but maybe i did something wrong bc it didnt work., also there is no official one working for 10.3.2.
What is happening is normal with those instructions (they aren't right).
All you need to do is install TWRP. Do not use the official one, it is out of date. Use TWRP from this thread Link here. The TWRP from that thread is from the official maintainer. It works fine with OOS 10.
- You need to get the phone in fully working order again. Which may mean you need to use the fastboot ROM, as you've probably "goofed" something up at this point. (no offense meant). Make sure your phone boots and such after this.
- For OOS 10 with the phone in fastboot, fastboot boot recoveryimgfilename.img (<-- For OOS 10 you will need TWRP 3.3.1-32 Q Unofficial by mauronofrio from the thread I linked to above) This will boot to TWRP.
- Now run TWRP 3.3.1-32 Unofficial Installer by mauronofrio this will install TWRP. The installer is the same for Android 9 and 10, doesn't matter.
- Once the installer runs, click back, choose reboot to recovery. If you boot to the system, you have to start over. Reboot to recovery!
- Install Magisk 20.3 <-- The current version. The official download page. After that you can reboot to the system. You should now have a rooted, phone with Magisk, and TWRP installed.
Any questions ask.
OhioYJ said:
What is happening is normal with those instructions (they aren't right).
All you need to do is install TWRP. Do not use the official one, it is out of date. Use TWRP from this thread Link here. The TWRP from that thread is from the official maintainer. It works fine with OOS 10.
- You need to get the phone in fully working order again. Which may mean you need to use the fastboot ROM, as you've probably "goofed" something up at this point. (no offense meant). Make sure your phone boots and such after this.
- For OOS 10 with the phone in fastboot, fastboot boot recoveryimgfilename.img (<-- For OOS 10 you will need TWRP 3.3.1-32 Q Unofficial by mauronofrio from the thread I linked to above) This will boot to TWRP.
- Now run TWRP 3.3.1-32 Unofficial Installer by mauronofrio this will install TWRP. The installer is the same for Android 9 and 10, doesn't matter.
- Once the installer runs, click back, choose reboot to recovery. If you boot to the system, you have to start over. Reboot to recovery!
- Install Magisk 20.3 <-- The current version. The official download page. After that you can reboot to the system. You should now have a rooted, phone with Magisk, and TWRP installed.
Any questions ask.
Click to expand...
Click to collapse
So getting it straight, i need to first reset my phone and then do the steps you described.
Can i backup the data first with TWRP to restore it later and avoid setting up everything again?
Davide1713 said:
So getting it straight, i need to first reset my phone and then do the steps you described.
Can i backup the data first with TWRP to restore it later and avoid setting up everything again?
Click to expand...
Click to collapse
Supposedly. I've never used that function of TWRP. Some people have luck with, some people restore things that shouldn't be restored and end up having to wipe the phone again. Personally I just use TitaniumBackup like I always have. I would search for information on that in the TWRP thread if you want to try method. I don't know enough on that to provide solid information.
OhioYJ said:
Supposedly. I've never used that function of TWRP. Some people have luck with, some people restore things that shouldn't be restored and end up having to wipe the phone again. Personally I just use TitaniumBackup like I always have. I would search for information on that in the TWRP thread if you want to try method. I don't know enough on that to provide solid information.
Click to expand...
Click to collapse
Hey man,
Thank you so much. It worked and i stay rooted even after reboot.
May i ask how you use the Titanium Backup, i think back in the days all i used it for was uninstalling system apps. Or if you know some nice guides. If you know other good things to checkout now that i have root i would appreciate it, i have been far away from rooting for too long.
Once again thank you so much
Davide1713 said:
Hey man,
Thank you so much. It worked and i stay rooted even after reboot.
May i ask how you use the Titanium Backup, i think back in the days all i used it for was uninstalling system apps. Or if you know some nice guides. If you know other good things to checkout now that i have root i would appreciate it, i have been far away from rooting for too long.
Click to expand...
Click to collapse
I use it to back up app and app data primarily. It allows me to restore data to apps after a clean install. Since I have the Pro version it's just a batch action (one click essentially). There is also a way to create a flashable .zip you can use in TWRP, although I haven't tried that method, as I'm typically not restoring apps, just data. I also use it remove apps from time to time.
OhioYJ said:
I use it to back up app and app data primarily. It allows me to restore data to apps after a clean install. Since I have the Pro version it's just a batch action (one click essentially). There is also a way to create a flashable .zip you can use in TWRP, although I haven't tried that method, as I'm typically not restoring apps, just data. I also use it remove apps from time to time.
Click to expand...
Click to collapse
Hey man, im sorry i am once again in need.
Idk why but at first i can reboot the system normally without issues. but after a while once i set up everything it just doesnt boot anymore. Am i missing something? do i have to do anything with magisk? download a module or something?
Could it be that google security update is the fault?
Davide1713 said:
Hey man, im sorry i am once again in need.
Idk why but at first i can reboot the system normally without issues. but after a while once i set up everything it just doesnt boot anymore. Am i missing something? do i have to do anything with magisk? download a module or something?
Could it be that google security update is the fault?
Click to expand...
Click to collapse
When you installed everything originally did you fix everything with a clean install? Both slots are the same version of Android? (Like you don't have something weird going on like Android 9 on one and Android 10 on another?)
You definitely have something abnormal going on. There shouldn't be anything in Magisk that you have to do, at least not to prevent crashing. I normally hide it, but that has to do with keeping apps from detecting root.
OhioYJ said:
When you installed everything originally did you fix everything with a clean install? Both slots are the same version of Android? (Like you don't have something weird going on like Android 9 on one and Android 10 on another?)
You definitely have something abnormal going on. There shouldn't be anything in Magisk that you have to do, at least not to prevent crashing. I normally hide it, but that has to do with keeping apps from detecting root.
Click to expand...
Click to collapse
I got it to boot by uninstalling magisk,
I am 100% sure i dont have two different version of android in different slots, bc yesterday i was in big trouble and nothing was working and i flashed on both slots the same version of android 10(dont remember exactly wich one as i tried a couple, but they were the same).
Today when i couldnt boot anymore i went into stock recovery, factory reset -> when it booted i placed the stockOS.zip file in the phone and applied update from local file -> after that i factory reset again from the system settings, so i think the phone should have installed it properly.
Only after that i did what you told me and installed TWRP and Magisk. and as i said it worked and i could restart my device etc..
After a while when i restarted i couldnt boot anymore and went to bootloader. Removing Magisk fixed it,apperantly on install magisk creates a copy of the boot.img that it restores on uninstall, and i booted to system.
Now i can use my phone but dont have root.
Im very thankful for you being there and helping me out trough this, i cant thank you enough
GuestD2272 said:
I got it to boot by uninstalling magisk,
I am 100% sure i dont have two different version of android in different slots, bc yesterday i was in big trouble and nothing was working and i flashed on both slots the same version of android 10(dont remember exactly wich one as i tried a couple, but they were the same).
Today when i couldnt boot anymore i went into stock recovery, factory reset -> when it booted i placed the stockOS.zip file in the phone and applied update from local file -> after that i factory reset again from the system settings, so i think the phone should have installed it properly.
Only after that i did what you told me and installed TWRP and Magisk. and as i said it worked and i could restart my device etc..
After a while when i restarted i couldnt boot anymore and went to bootloader. Removing Magisk fixed it,apperantly on install magisk creates a copy of the boot.img that it restores on uninstall, and i booted to system.
Now i can use my phone but dont have root.
Im very thankful for you being there and helping me out trough this, i cant thank you enough
Click to expand...
Click to collapse
Not sure if you're still having this issue but I'll post the solution just in case anyone gets stumped, does a google search, and comes across this post. You were using the wrong command.
"fastboot boot" just lets you boot with the img so you can verify that root works.
"fastboot FLASH boot" will flash it and root will stick after reboot.
No need to jump through hoops with TWRP and such.
Hey guys,
So I am at a point where my zte axon 7 won't boot past the Linux tux penguin. It'll show it, then the screen will go blank and the led will flash red 3 times and seems like it turns itself off (blank screen).
I can't get into the fastboot menu anymore. I can get into TWRP 3.2.1-0 though.
Anyone got any ideas to bring it back to life?
Thank you. If I work it out I'll comment back. Spent about 5 hours trying to get it going thus far.
Worked it out
Okay after many hours of fun....
Got it going
Had to flash the Full EDL and I changed the bootloader to one of the custom ones from here. When I put the fastboot image from the axon7toolkit, it was actually causing the loops. So I don't have that installed but I still have an unlocked bootloader. Anyway, got the full edl installed, then went to twrp, used that party vendor image app thing, rebooted into TWRP, used the universal bootstack, 2017g modem, lineage 17. 1 Android 10, gapps nano for Android 10. I rebooted, lineage loaded I was so excited, then bam, password apparently exists. So I flashed Magisk on and did the reset data partition in twrp and rebooted. It worked happy days. I now have an axon 7 2017g on lineage 17.1 (android 10) happy days. All the info is across the forum posts, just gotta read a lot of garbage comments to find it. Thanks past and future axon 7 owners.
obit11 said:
Hey guys,
So I am at a point where my zte axon 7 won't boot past the Linux tux penguin. It'll show it, then the screen will go blank and the led will flash red 3 times and seems like it turns itself off (blank screen).
I can't get into the fastboot menu anymore. I can get into TWRP 3.2.1-0 though.
Anyone got any ideas to bring it back to life?
Thank you. If I work it out I'll comment back. Spent about 5 hours trying to get it going thus far.
Click to expand...
Click to collapse
Weird I had the same problem after changing battery
ZTE won't boot pass the wifi Page after factory reset.
obit11 said:
Okay after many hours of fun....
Got it going
Had to flash the Full EDL and I changed the bootloader to one of the custom ones from here. When I put the fastboot image from the axon7toolkit, it was actually causing the loops. So I don't have that installed but I still have an unlocked bootloader. Anyway, got the full edl installed, then went to twrp, used that party vendor image app thing, rebooted into TWRP, used the universal bootstack, 2017g modem, lineage 17. 1 Android 10, gapps nano for Android 10. I rebooted, lineage loaded I was so excited, then bam, password apparently exists. So I flashed Magisk on and did the reset data partition in twrp and rebooted. It worked happy days. I now have an axon 7 2017g on lineage 17.1 (android 10) happy days. All the info is across the forum posts, just gotta read a lot of garbage comments to find it. Thanks past and future axon 7 owners.
Click to expand...
Click to collapse
Hi,
I currently restored my AXON A2017G to factory setting but when it loads it won't pass the WiFi connection page.
When it loads after the welcome page, it show the SIM part..after clicking next it shows the WiFi details page after entering my details and I click next it would show "just a sec" and return me back to the WiFi details page.
Kindly help with how I can resolve this.
Thanks
Hi Pls how do i get my system to recognize my phone when it recovery state. Also how do i get the axon7toolkit
obit11 said:
Okay after many hours of fun....
Got it going
Had to flash the Full EDL and I changed the bootloader to one of the custom ones from here. When I put the fastboot image from the axon7toolkit, it was actually causing the loops. So I don't have that installed but I still have an unlocked bootloader. Anyway, got the full edl installed, then went to twrp, used that party vendor image app thing, rebooted into TWRP, used the universal bootstack, 2017g modem, lineage 17. 1 Android 10, gapps nano for Android 10. I rebooted, lineage loaded I was so excited, then bam, password apparently exists. So I flashed Magisk on and did the reset data partition in twrp and rebooted. It worked happy days. I now have an axon 7 2017g on lineage 17.1 (android 10) happy days. All the info is across the forum posts, just gotta read a lot of garbage comments to find it. Thanks past and future axon 7 owners.
Click to expand...
Click to collapse
Hey please i want to ask u can i flash the modem -N , because am now i have the custom rom naugat , can i use the modem naugat with the lineage os 17.1 !!!!