Request: TWRP or CWM Recovery Image - Huawei Y5 (2017) Questions & Answers

I've gotten really close to having a working copy of TWRP on the Huawei Y5 2017, but the slide controls do not work so you cannot progress through the dialogs. The Y5 2017 is really temperamental about it's recovery and often seems to ignore being flashed and will just boot into it's own recovery.
The bootloader is unlocked, FRP is unlocked, I just need a recovery image that works.

Related

Help twrp

I have a Huawei P9 Lite and i have installed twrp and android 7.0 on it. Now I want to install Google assistant, but when i try to boot in twrp recovery (volume down + power b) it shows me the screen where it says ''Installing update'' and then freezes at 5 % so i have to hold my power button to power off the phone.
If I dont try to run in the twrp, phone works just fine.
I apologize for my bad english.
Hi there,
I will move your thread in the correct forum dedicated to Huawei P9 Lite for more relevant answers.
Good luck
Bump..
Just to state that I am in the same boat here; as I am facing the same issue. Here's what happened in my case (using a guide found here at XDA-Developers):
-- unlocked the bootloader
-- booted to bootloader and flashed twrp
-- used adb to reboot to recovery (adb reboot recovery)
-- used twrp recovery to flash nougat update (two zip files, one ~1300mb and second ~680mb)
-- had some errors that were expected, the guide said ignore them and reboot after both zips have been flashed.
-- the flash overall was successful as the phone booted in emui 5 with android nougat. However, there was no virtual keyboard; so decided to do a factory reset
-- rebooted to recovery, but this time, the phone booted to huawei erecovery
-- did a factory reset, but to no avail
-- now, i can't boot into twrp to flash anything else. booting into bootloader and using fastload to flash recovery image is successful, but the phone does not boot to twrp recovery; remain stuck on "your phone is booting up" (or something similar).
My phone is not bricked, as basic telephony, wifi and built-in apps are working fine. But, without a keyboard, its pretty useless for everyday use. Any help in this matter will be appreciated.
KashifSMalik said:
Just to state that I am in the same boat here; as I am facing the same issue. Here's what happened in my case (using a guide found here at XDA-Developers):
-- unlocked the bootloader
-- booted to bootloader and flashed twrp
-- used adb to reboot to recovery (adb reboot recovery)
-- used twrp recovery to flash nougat update (two zip files, one ~1300mb and second ~680mb)
-- had some errors that were expected, the guide said ignore them and reboot after both zips have been flashed.
-- the flash overall was successful as the phone booted in emui 5 with android nougat. However, there was no virtual keyboard; so decided to do a factory reset
-- rebooted to recovery, but this time, the phone booted to huawei erecovery
-- did a factory reset, but to no avail
-- now, i can't boot into twrp to flash anything else. booting into bootloader and using fastload to flash recovery image is successful, but the phone does not boot to twrp recovery; remain stuck on "your phone is booting up" (or something similar).
My phone is not bricked, as basic telephony, wifi and built-in apps are working fine. But, without a keyboard, its pretty useless for everyday use. Any help in this matter will be appreciated.
Click to expand...
Click to collapse
Your twrp is gone.You need flash revolution recovery from Badwolfye,that is for nougat!
Claleale said:
Your twrp is gone.You need flash revolution recovery from Badwolfye,that is for nougat!
Click to expand...
Click to collapse
Did that and it worked thanks!
Claleale said:
Your twrp is gone.You need flash revolution recovery from Badwolfye,that is for nougat!
Click to expand...
Click to collapse
This seems helpful; but how can I flash recovery if I can't boot to fastboot?
[Update] Oh, got to fastboot, trying the suggested recovery now.
Fixed
Fixed using the suggestion above. Thanks.

P9 Lite FRP Lock - How to unlock

All,
I had flashed Elite ROM v4 and it was successful except messing up on MagiskSu where one application still detected the phone is rooted. To solve the problem, decided to flash it again without realizing OEM lock is off - forgotten to activate before start flash. Now, after wipe everything using TWRP,reboot to continue the flashing procedure, the phone is unable to boot into TWRP recovery and only able to boot to stock recovery and fastboot. Unfortunately the FRP is lock and I could not not flash TWRP again. Any advice?

From bugged TWRP to stock recovery to working TWRP

Hello mates.
I have a P9 Lite (VNS-L31C432B380, Android 7.0, EMUI 5.0).
Bootloader is unlocked, and I have fastboot and adb on my pc.
I currently have a bugged TWRP, and I have a looooot of troubles installing a working version (for obscure reasons. Booting into TWRP just locks my phone in the "your phone has been unlocked etc..." screen. However, I can boot on Huawei eRecovery and OS just fine.).
I would like to know how I can reflash the stock recovery (completely remove TWRP basically), then flash a WORKING version of TWRP (link appreciated).
Thanks in advance.

how to root huawei y6 2017 MYA-U29

i have unlocked bootloader , flashed twrp image but i can not access to twrp menu
my phone always shows some sort of things when i try to put it into recovery mode. i m not being able to reach recovery mode. i can access erecovery mode but in recovery mode it shows download from wi-fi but while trying to download from there it shows failed. what to do????
Root Huawei Y5 2017
You can do it with the help of TWRP..
If you can't open the twrp mode then search for it on YouTube.. Download the magisk.zip package and move it to your phone and install it with the help of twrp... it worked for me...

Huawei Mediapad M3 Lite 10 (BAH-W09) Bootloop

Hi there,
I got a problem with updating my M3 Lite: First I unlocked the bootloader, installed TWRP 3.2.0-0 and then lineage-16.0-20191112-UNOFFICIAL-bach.zip without Gapps. Booted into Lineage and everything went fine.
After that I installed via TWRP version 3.3.1-0 of TWRP and rebooted into TWRP. Then I reset the M3 and installed via Fastboot TWRP 3.3.1-3 and tried to reboot into TWRP but had no luck. Now I'm stuck with the screen saying "Your device has been unlocked and can't be trusted". Wether I try to boot with holding Volume Up or Volume Down, I always got back to that screen. Unfortunatly I can't even get into Fastboot mode.
Did I brick my M3 Lite or has somebody a clue how to fix that bootloop?
same problem here
Same here, would love to hear if anyone has any info on this!
Hi !
If you can't put your device in TWRP, I guess that there's is no way to recover your device. Unfortunately it happens also to me with two different Huawei devices ... I fixed my devices after I googled about unbrick Huawei tools, there's 2 or more tools which are able to fix your device, but unfortunately they are not free.
Bring them to Huawei's service center
clemsche said:
Hi there,
I got a problem with updating my M3 Lite: First I unlocked the bootloader, installed TWRP 3.2.0-0 and then lineage-16.0-20191112-UNOFFICIAL-bach.zip without Gapps. Booted into Lineage and everything went fine.
After that I installed via TWRP version 3.3.1-0 of TWRP and rebooted into TWRP. Then I reset the M3 and installed via Fastboot TWRP 3.3.1-3 and tried to reboot into TWRP but had no luck. Now I'm stuck with the screen saying "Your device has been unlocked and can't be trusted". Wether I try to boot with holding Volume Up or Volume Down, I always got back to that screen. Unfortunatly I can't even get into Fastboot mode.
Did I brick my M3 Lite or has somebody a clue how to fix that bootloop?
Click to expand...
Click to collapse
Hi! How can I unlock the bootloader, my tablet doesn't have imei and all methods that I found required the imei.
Which method did you use?
Thanks!

Categories

Resources