So guys, i have tried to downgrade my phone from android 7.1.1 to 6.0 which ended in a softbrick, after that i tried 2 flash a stock rom but that completely bricked it and now my phone wont dont anything anymore except for some kind of mode that my computer can detect in device it sees the qualcomm port 9008 device but there a thing it just wont work miflash doesnt recognize it and i cant find any sollutions online please help
tnhx
Daan_K said:
So guys, i have tried to downgrade my phone from android 7.1.1 to 6.0 which ended in a softbrick, after that i tried 2 flash a stock rom but that completely bricked it and now my phone wont dont anything anymore except for some kind of mode that my computer can detect in device it sees the qualcomm port 9008 device but there a thing it just wont work miflash doesnt recognize it and i cant find any sollutions online please help
tnhx
Click to expand...
Click to collapse
I wonder:
-Which is your phone model, as stated on the back of the phone?
-Which is the file that you used to downgrade?
-Which stock rom did you try to flash?
The fix is pretty simple but seeing how you borked three simple procedures I'd like to know everything and lay it out for you precisely. You have to have done something horribly wrong to softbrick a phone with the stock updater system...
Choose an username... said:
I wonder:
-Which is your phone model, as stated on the back of the phone?
-Which is the file that you used to downgrade?
-Which stock rom did you try to flash?
The fix is pretty simple but seeing how you borked three simple procedures I'd like to know everything and lay it out for you precisely. You have to have done something horribly wrong to softbrick a phone with the stock updater system...
Click to expand...
Click to collapse
Okay at first my phone model on the back of my device is, as i mentioned before, "zte a2017g" thats the european version of this phone, chinese is "a2017" and the us version is "2017u".
The file i used 2 downgrade was the stock rom from the official website of zte
it was the full edl file buildnumber b10.
and again i once sofbricked it, i know how 2 fix that, but now it hard bricked, well i think so at least, i cant get it to boot into bootloader, recovery or anything, when i hold the power button it shakes the device, and it shows the zte logo for about 2 seconds then it disappears, and nothing happens but my computer does recognize it as a connected device but i cant use miflash of something else because those programs dont see it.
Daan_K said:
Okay at first my phone model on the back of my device is, as i mentioned before, "zte a2017g" thats the european version of this phone, chinese is "a2017" and the us version is "2017u".
The file i used 2 downgrade was the stock rom from the official website of zte
it was the full edl file buildnumber b10.
and again i once sofbricked it, i know how 2 fix that, but now it hard bricked, well i think so at least, i cant get it to boot into bootloader, recovery or anything, when i hold the power button it shakes the device, and it shows the zte logo for about 2 seconds then it disappears, and nothing happens but my computer does recognize it as a connected device but i cant use miflash of something else because those programs dont see it.
Click to expand...
Click to collapse
all right. it's still freaking weird. Use my DFU unbrick guide but only do step 4 and 5 (but use the files on the top anyways)(you just have to hold Vol+ and Vol - and insert the cable instead of taking the phone apart and shorting pins). After that check the driver, if it is still Qualcomm HS-USB QDLoader 9008 then flash with MiFlash, if not, tell me what appears
Choose an username... said:
all right. it's still freaking weird. Use my DFU unbrick guide but only do step 4 and 5 (but use the files on the top anyways)(you just have to hold Vol+ and Vol - and insert the cable instead of taking the phone apart and shorting pins). After that check the driver, if it is still Qualcomm HS-USB QDLoader 9008 then flash with MiFlash, if not, tell me what appears
Click to expand...
Click to collapse
allright allready thanks loads for your support but could you maybe send the right file to flash because i have no idea, and please, the files for a2017g not a2017 or a2017u thankyou so much
Daan_K said:
allright allready thanks loads for your support but could you maybe send the right file to flash because i have no idea, and please, the files for a2017g not a2017 or a2017u thankyou so much
Click to expand...
Click to collapse
they are in the guide. at the top, there's a link to WesTD's EDL flashable files. Get one for A2017G, for example B09
Choose an username... said:
they are in the guide. at the top, there's a link to WesTD's EDL flashable files. Get one for A2017G, for example B09
Click to expand...
Click to collapse
Allright, thankyou so much my dude
Choose an username... said:
all right. it's still freaking weird. Use my DFU unbrick guide but only do step 4 and 5 (but use the files on the top anyways)(you just have to hold Vol+ and Vol - and insert the cable instead of taking the phone apart and shorting pins). After that check the driver, if it is still Qualcomm HS-USB QDLoader 9008 then flash with MiFlash, if not, tell me what appears
Click to expand...
Click to collapse
aight, as i thought this didnt work, i tired it but miflash basicly just gave me an error notification.
also when i go into device manager i can see that my device is connected but i show the name with a yellow triangle with a ! in it i have no clue what this means can u please help me with this. i rlly want my phone back
Daan_K said:
aight, as i thought this didnt work, i tired it but miflash basicly just gave me an error notification.
also when i go into device manager i can see that my device is connected but i show the name with a yellow triangle with a ! in it i have no clue what this means can u please help me with this. i rlly want my phone back
Click to expand...
Click to collapse
First of all, if you get an error TELL ME what it says!
Send me a screenshot of the device manager, i can do very little with "yellow triangle"
Don't bother? That guy is using XDA as a free emergency support without looking for one second.
He probably would like you to do a teamviewer while he's watching football with a beer and not even say thank you.
I'm horrified.
RedWave31 said:
Don't bother? That guy is using XDA as a free emergency support without looking for one second.
He probably would like you to do a teamviewer while he's watching football with a beer and not even say thank you.
I'm horrified.
Click to expand...
Click to collapse
rlly m8. im just a guy who needs help with his phone the guy "choose a username..." i helping me with it, ive been unable 2 fix my phone with any of the other threads i just need some help and i have said thanks alot, dont call me that
Daan_K said:
rlly m8. im just a guy who needs help with his phone the guy "choose a username..." i helping me with it, ive been unable 2 fix my phone with any of the other threads i just need some help and i have said thanks alot, dont call me that
Click to expand...
Click to collapse
Sorry, I don't believe you for one second. Like litterally THOUSANDS of people here and here opening "bricked plz hlp" threads, you didn't even have the BASIC, LOWEST courtesy of writing more than 10 words of gibberish whining about your situation, without a single usefull element of context.
Proof of that in the NUMEROUS questions asked about ELEMENTARY elements about your situation. You're litterally the kind of person that would go to a car mechanic, drop the keys on the counter saying "my car is broken, fix it" and just leave without a single word added. That's RUDE and, yeah, I'm tired AF of people like you who can't READ THE DAMN XDA RULES and got NOT education whatsoever.
Nd writng frm a phone in T9 mde dsnt rlly bring nythng mre on the tble either.
Too bad you found somebody to help, as it's only encouraging that kind of behaviour.
//Rant off//
@Daan_K this EDL Tool can help https://forum.xda-developers.com/axon-7/development/axon-7-edl-tool-flash-backup-restore-t3750759
Choose an username... said:
First of all, if you get an error TELL ME what it says!
Send me a screenshot of the device manager, i can do very little with "yellow triangle"
Click to expand...
Click to collapse
this is a screenshot of my device manager, and what I meant with yellow triangle, also it doesn't work with the edl-tool nor the axon7tool
Daan_K said:
this is a screenshot of my device manager, and what I meant with yellow triangle, also it doesn't work with the edl-tool nor the axon7tool
Click to expand...
Click to collapse
Okay, let's try two things:
First right click on it and uninstall the device, also delete driver software for the device (it will be a checkbix asking for that after you hit 'uninstall device'). After that, hold Volume up, Volume down, and Power until the Device manager refreshes. After that the driver should reinstall itself. If it still shows with the yellow triangle, right click it, click on Properties, and send me a screenshot (or translate me what it says on the status part)
https://forum.xda-developers.com/axon-7/how-to/a2017-4th-category-brick-repair-manual-t3585898
if you can only get to dfu mode and nothing else, use thise guide, you'll have to dismantle your phone. Had to unbrick mine with this from a hardbrick, worked flawlessly
IvI97 said:
https://forum.xda-developers.com/axon-7/how-to/a2017-4th-category-brick-repair-manual-t3585898
if you can only get to dfu mode and nothing else, use thise guide, you'll have to dismantle your phone. Had to unbrick mine with this from a hardbrick, worked flawlessly
Click to expand...
Click to collapse
Hey, a couple of things: one, i've updated the guide, it's around, much simpler to use. just saying. Two, this guy has the right driver. Don't confuse him with DFU while at least for now it is not.
Choose an username... said:
Okay, let's try two things:
First right click on it and uninstall the device, also delete driver software for the device (it will be a checkbix asking for that after you hit 'uninstall device'). After that, hold Volume up, Volume down, and Power until the Device manager refreshes. After that the driver should reinstall itself. If it still shows with the yellow triangle, right click it, click on Properties, and send me a screenshot (or translate me what it says on the status part)
Click to expand...
Click to collapse
omg the triangle is gone, thankyousomuch, but what can I use now 2 fix it further?? is that in your guide maybe?
choose an username... said:
hey, a couple of things: One, i've updated the guide, it's around, much simpler to use. Just saying. Two, this guy has the right driver. Don't confuse him with dfu while at least for now it is not.
Click to expand...
Click to collapse
omygod it ****ing working, choose an username man, i can't thank you enough, seriously ur the best man lots of love for doing this
Related
I need some serious help guys. Phone is stuck at boot logo and wont turn on. IT wont enter recovery mode. it wont hard reset. It wont enter download mode.
The phone was completely stock originally. So i rooted using towelroot and ran the 'AutoREC' program. That did its thing and restarted and got stuck in fastboot mode. couldnt get out of it. Eventually managed to reflash all the original stock ROM partitions and it started to boot again... only to get stuck at the LG logo. I need some serious help.
PC wont detect the phone at all and its as if there is no OS on the phone. I have the D802 variant 32gb.
which kdz variant did you flash.
v.konvict said:
which kdz variant did you flash.
Click to expand...
Click to collapse
D80220C_00
got it from "lg-firmware-rom" after entering my imei
spookyleaf said:
D80220C_00
got it from "lg-firmware-rom" after entering my imei
Click to expand...
Click to collapse
same thing happened to a d802 of a friend of mine. but he flashed the d802h variant. will keep you posted if i find a way out.
I am in the same position. Except I tried to flashify stock recovery on d800 at&t variant. I wanted to install the stock update because I was still stock. Just root with twrp before...I had the sprint variant before the ls980 and it never screwed me over like this. I'll post if I figure anything out... I got to get ahold of shellnutt... He's the g2's god.
Dam. Leme me know what happens
Sent from my Nexus 5 using XDA Free mobile app
spookyleaf said:
Dam. Leme me know what happens
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Have you tried both ways to enter recovery?
Push PWR + Vol Down till you see the LG Logo then release and press both again
Push PWR + Vol Down till you see the LG logo then release and press and hold the volume up and volume down buttons until reset screen appears.
If you can see the LG logo I think you are not Hard Bricked
I haven't tried that exactly. I'll give it a shot when I get a chance
Sent from my Nexus 5 using XDA Free mobile app
You may want to check your internal hardware to be sure it's marked as a D802. Typically the feint white stamp in the lower center/left of the phone with rear cover removed is the true model number. It's also stamped on the board and on the ribbon cables going up eithe side. Your device is showing the signs of a false d802 which has become sadly common in recent months.
If it's legit d802 then flash aboot, boot, laf and power it off.
Then hold voume up and connect to pc while still holding volume up.
Make sure you have the drivers installed, fire up lg mobile support tool or the lg flash tool 2014 (you need your kdz file now - find it using your imei and lg-firmware site)
Okay so I found this: http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404 to get it to come up as a device in Windows and Linux. And this: http://forum.xda-developers.com/showthread.php?t=2582142 I'm sure you read this but you need to do it after following the first guide. I already have a Linux installed and I'm going to try today. I'll update with a guide for you only if you need it and if I succeed. I just need to remind you. You CANNOT mess up on the second guide... Well as far I can tell. But if the first guides label is actually true then maybe I'm wrong.
ok so ive ordered some tools to open up the phone and check the internals. Hopefully its a legit G2. Meanwhile every single possible combination of the power and volume keys does absolutely nothing. If all else fails ill try shorting the capacitors as ive seen on a guide from here and hopefully that will be the end of it. Thanks for all the input guys. Ill keep you posted!
darkpower_4 said:
Okay so I found this: http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404 to get it to come up as a device in Windows and Linux. And this: http://forum.xda-developers.com/showthread.php?t=2582142 I'm sure you read this but you need to do it after following the first guide. I already have a Linux installed and I'm going to try today. I'll update with a guide for you only if you need it and if I succeed. I just need to remind you. You CANNOT mess up on the second guide... Well as far I can tell. But if the first guides label is actually true then maybe I'm wrong.
Click to expand...
Click to collapse
thanks i appreciate that very much. Keep me informed on how it goes. Fingers crossed!
spookyleaf said:
ok so ive ordered some tools to open up the phone and check the internals. Hopefully its a legit G2. Meanwhile every single possible combination of the power and volume keys does absolutely nothing. If all else fails ill try shorting the capacitors as ive seen on a guide from here and hopefully that will be the end of it. Thanks for all the input guys. Ill keep you posted!
Click to expand...
Click to collapse
Plug it into a windows machine, open device manager and look for Qualcomm qhsusb_bulk. If you get that, you're already in bulk and don't need to worry about shorting capacitors. If it's not being recognized in any way, you may be forced into that as a last resort.
spookyleaf said:
ok so ive ordered some tools to open up the phone and check the internals. Hopefully its a legit G2. Meanwhile every single possible combination of the power and volume keys does absolutely nothing. If all else fails ill try shorting the capacitors as ive seen on a guide from here and hopefully that will be the end of it. Thanks for all the input guys. Ill keep you posted!
Click to expand...
Click to collapse
All you really need to open it up is a guitar pick. It pries apart make sure you take the sim card out. After that it's going to take a little swipe around the edge and it'll pop open no problem.
iowabowtech said:
Plug it into a windows machine, open device manager and look for Qualcomm qhsusb_bulk. If you get that, you're already in bulk and don't need to worry about shorting capacitors. If it's not being recognized in any way, you may be forced into that as a last resort.
Click to expand...
Click to collapse
I checked that already. Not going into bulk mode. Seems like the capacitors are my last resort
so ive poped the phone open and guess what... its not a D802.. its a D800.. the at&t version... wtf.. no wonder i bricked it. gonna see if i can use the unbrickable method
did you checked the IMEI?
nope its says on the speaker grille after you remove the back cover. "D800"
how is that possible? did phone information apps showed your device as 802 aswell? did kernel info and phone info in system settings lied too?
Hey guys I just installed the full image of 7.1.2 beta 2 over top of beta 1 using Flashfire without the bootloader and modem selected and all went fine until I decided to use Flashfire to upgrade the bootloader and modem forgetting that we must use Fastboot as I am new to Flashfire and I was reading all through the beta thread before I did it and didn't understand we still must use Fastboot so anyways I am stuck in a hard brick now with the phone not powering on at all and can't do anything to restore it as my Windows 10 now detects the phone as unknown device (device descriptor request failed) is there anything I can do at this point as I just bought this phone used.
The error that I got in Flashfire was that the device storage is full when updating the bootloader as the modem went fine.
@rmorris003
You said the phone won't even power on. You mean no Google? Hold the power button down for a couple of minutes and see if it will reboot. If not put it on a charger, and after fully charging try the long press power button again. If you can get it to start, try to put it in fastboot mode. (ie. power+vol dn). If you can get to bootloader you can send fastboot commands and fix it. If you can get to this point, there are instructions here.
rmorris003 said:
Hey guys I just installed the full image of 7.1.2 beta 2 over top of beta 1 using Flashfire without the bootloader and modem selected and all went fine until I decided to use Flashfire to upgrade the bootloader and modem forgetting that we must use Fastboot as I am new to Flashfire and I was reading all through the beta thread before I did it and didn't understand we still must use Fastboot so anyways I am stuck in a hard brick now with the phone not powering on at all and can't do anything to restore it as my Windows 10 now detects the phone as unknown device (device descriptor request failed) is there anything I can do at this point as I just bought this phone used.
The error that I got in Flashfire was that the device storage is full when updating the bootloader as the modem went fine.
Click to expand...
Click to collapse
Hello... Well if your device is recognized as unknown, you could try to give this a shot:
https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
Try to install Qualcomm driver first check the device manager. If you see your phone recognized as:
HS-USB QDLOADER 9008
You may be lucky!
Good luck...
5.1 said:
Hello... Well if your device is recognized as unknown, you could try to give this a shot:
https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
Try to install Qualcomm driver first check the device manager. If you see your phone recognized as:
HS-USB QDLOADER 9008
You may be lucky!
Good luck...
Click to expand...
Click to collapse
I will try this when I get back from work, I just cant get my pc to see it as anything other than unknown device as it says this is the best driver for it.
rmorris003 said:
I will try this when I get back from work, I just cant get my pc to see it as anything other than unknown device as it says this is the best driver for it.
Click to expand...
Click to collapse
I see... There's a txt file in the driver folder. Follow its instructions.
Good luck...
5.1 said:
I see... There's a txt file in the driver folder. Follow its instructions.
Good luck...
Click to expand...
Click to collapse
I am stumped, I have disabled driver enforcement and can't get any drivers to see my phone so I am not sure what to do.
rmorris003 said:
I am stumped, I have disabled driver enforcement and can't get any drivers to see my phone so I am not sure what to do.
Click to expand...
Click to collapse
You disabled driver signature and rebooted your computer? Then installed Qualcomm drivers from the thread I linked you to? I think you have to reboot your computer once more...
Good luck...
I held the power and vol down and now it shows up under com ports so this is a good sign.
Ok got bootloader back and now put twrp on, I had to use qfil with nexus6p_fix_bricked but it got stuck at writing system.img but atleast the phone is on now.
Flashed the 7.1.2 beta 2 full image using the fastboot method included and all is back to normal.
Thanks so much for the help.
rmorris003 said:
Ok got bootloader back and now put twrp on, I had to use qfil with nexus6p_fix_bricked but it got stuck at writing system.img but atleast the phone is on now.
Flashed the 7.1.2 beta 2 full image using the fastboot method included and all is back to normal.
Thanks so much for the help.
Click to expand...
Click to collapse
Wow glad it worked for you... You might push the thanks button in the OP of the thread where you found the debrick tools and thanks @tenfar since he offered the solution. He already saved a few N6P devices. I only linked you to his thread which you could have found yourself anyway...
Cheers...
5.1 said:
Wow glad it worked for you... You might push the thanks button in the OP of the thread where you found the debrick tools and thanks @tenfar since he offered the solution. He already saved a few N6P devices. I only linked you to his thread which you could have found yourself anyway...
Cheers...
Click to expand...
Click to collapse
I'm pretty sure I was reading it before but I had to do some extensive reading on how to get the driver to read properly. I work night shift so I was kinda tired yesterday.
rmorris003 said:
I'm pretty sure I was reading it before but I had to do some extensive reading on how to get the driver to read properly. I work night shift so I was kinda tired yesterday.
Click to expand...
Click to collapse
You could report your experience in the other thread. Maybe it could help other users who faced the issue you had. :good:
Cheers...
rmorris003 said:
I'm pretty sure I was reading it before but I had to do some extensive reading on how to get the driver to read properly. I work night shift so I was kinda tired yesterday.
Click to expand...
Click to collapse
Hi there, I'm extremely new to Forums and the whole android scene please could you help?
I have the same issue with my Nexus 6P Hard bricked, only detected as a 9008 Port, no vibrations no power nothing!
I've tried to follow so many guides for the past three days however I've managed nothing. I've tried to do as you mentioned in the first posts, used the nexus6p_unbrick in Qfil but Sahara download fails.
Please Please Help, No Warranty just a Brick!
Clarkeofcurtis said:
Hi there, I'm extremely new to Forums and the whole android scene please could you help?
I have the same issue with my Nexus 6P Hard bricked, only detected as a 9008 Port, no vibrations no power nothing!
I've tried to follow so many guides for the past three days however I've managed nothing. I've tried to do as you mentioned in the first posts, used the nexus6p_unbrick in Qfil but Sahara download fails.
Please Please Help, No Warranty just a Brick!
Click to expand...
Click to collapse
I have the same exact problem, everytime i try to flash with qfil it says it can't connect to my COMPORT
Clarkeofcurtis said:
Hi there, I'm extremely new to Forums and the whole android scene please could you help?
I have the same issue with my Nexus 6P Hard bricked, only detected as a 9008 Port, no vibrations no power nothing!
I've tried to follow so many guides for the past three days however I've managed nothing. I've tried to do as you mentioned in the first posts, used the nexus6p_unbrick in Qfil but Sahara download fails.
Please Please Help, No Warranty just a Brick!
Click to expand...
Click to collapse
Falitheman said:
I have the same exact problem, everytime i try to flash with qfil it says it can't connect to my COMPORT
Click to expand...
Click to collapse
Hello,
Someone mentioned this in another post:
Hold volume up and plug the USB cord to.your computer and start qfil flash. Keep holding volume up until the flash ends...
Good luck...
5.1 said:
Hello,
Someone mentioned this in another post:
Hold volume up and plug the USB cord to.your computer and start qfil flash. Keep holding volume up until the flash ends...
Good luck...
Click to expand...
Click to collapse
So i have some good news...it connects now. it says start sending programmer but then it says download failed: unable to download flash programmer using sahara protocol and then it fails. Any help?:crying:
Falitheman said:
So i have some good news...it connects now. it says start sending programmer but then it says download failed: unable to download flash programmer using sahara protocol and then it fails. Any help?:crying:
Click to expand...
Click to collapse
Hey,
What version of qpst did you install?
Good luck...
5.1 said:
Hey,
What version of qpst did you install?
Good luck...
Click to expand...
Click to collapse
I am using 2.7.441
Update: It seemed to be working for a second but then it says download failed: qsahara server fail: process fail. Any idea what that means? I really need my phone back
Falitheman said:
I am using 2.7.441
Update: It seemed to be working for a second but then it says download failed: qsahara server fail: process fail. Any idea what that means? I really need my phone back
Click to expand...
Click to collapse
Hey,
Google qpst 2.7.453
It's easy to find. Scan the files on virustotal.com though.
Maybe the older versions are incompatible...
Good luck...
5.1 said:
Hey,
Google qpst 2.7.453
It's easy to find. Scan the files on virustotal.com though.
Maybe the older versions are incompatible...
Good luck...
Click to expand...
Click to collapse
I tried with the version you suggested and i got the same error i just had. Can you send me your version so i can see if that works?
Hi there, I've been browsing through the threads related to unbricking of the Nexus 6P stuck in qualcomm hs-usb qdloader 9008 mode, really desperate to get my device working again if even possible however I've tried for about four days now different ways and files and I've had no luck.
My bootloader is locked and no ADB etc managed to get my device showing as the 9008 port so I think it's stuck in EDL.
Following guides, this is the furthest I've yet to get (In screenshot)
Could anyone shed some light and some assistance please? what am I doing wrong!?
attempted to apply for heat some to the device then re flash ?
blackcell1 said:
attempted to apply for heat to the device then re flash ?
Click to expand...
Click to collapse
Sorry, I don't quite understand what you mean?
Clarkeofcurtis said:
Sorry, I don't quite understand what you mean?
Click to expand...
Click to collapse
Use a hairdryer to warm up the back of the phone.
Are you pulling my leg? Warm it up then reflash?
nah im not trying to make you destroy your phone, being rather serious with this method. i use it on a daily basis to solve phones that fail during restoring factory images. i wouldn't know how long to give it with a hair dryer as i have access to a heat gun/heat mats .
just think of it as a cheap mans re balling method
blackcell1 said:
nah im not trying to make you destroy your phone, being rather serious with this method. i use it on a daily basis to solve phones that fail during restoring factory images. i wouldn't know how long to give it with a hair dryer as i have access to a heat gun/heat mats .
just think of it as a cheap mans re balling method
Click to expand...
Click to collapse
Sorry haha, I'm a noob with most of this android stuff bar rooting and flashing a few devices prior! I shall give it a go now and get back to you - thank you for the advice
Clarkeofcurtis said:
Sorry haha, I'm a noob with most of this android stuff bar rooting and flashing a few devices prior! I shall give it a go now and get back to you - thank you for the advice
Click to expand...
Click to collapse
good luck, id give it a good couple of minutes on the highest setting, just so its a little hot to the touch. and attempt the flashing of the files when its still hot/warm.
blackcell1 said:
good luck, id give it a good couple of minutes on the highest setting, just so its a little hot to the touch. and attempt the flashing of the files when its still hot/warm.
Click to expand...
Click to collapse
thank you so much that worked, it has said flash successful, first time I got a google logo but now nothing, what would be my next step please?
if the bootloader is unlocked then you can directly flash the firmware. but if its not google "nexus ota" and then on your phone jump into the recovery and check the firmware model number and download the same ota and adb sideload it.
im not 100% sure on the next step as I've never had a nexus 6p with a dead bootloader. but thats what id do.
---------- Post added at 04:50 PM ---------- Previous post was at 04:49 PM ----------
but from my personal experience with having to heat a phone up to restore factory images, it kinda means the phone is nearing the end of its life and id start thinking about buying your next phone before it sh*ts the bed.
blackcell1 said:
if the bootloader is unlocked then you can directly flash the firmware. but if its not google "nexus ota" and then on your phone jump into the recovery and check the firmware model number and download the same ota and adb sideload it.
im not 100% sure on the next step as I've never had a nexus 6p with a dead bootloader. but thats what id do.
Click to expand...
Click to collapse
Thank you for the reply and continuing to help, after seeing the google logo just once I'm getting nothing again - I'm even more determined now though as It's been dead for 2 months so this is the furthest I've gotten - the application of heat is what did it for me and fixed the error I was getting, can't get into recovery now though holding power + down etc
Clarkeofcurtis said:
Thank you for the reply and continuing to help, after seeing the google logo just once I'm getting nothing again - I'm even more determined now though as It's been dead for 2 months so this is the furthest I've gotten - the application of heat is what did it for me and fixed the error I was getting, can't get into recovery now though holding power + down etc
Click to expand...
Click to collapse
yeah can you access the bootloader at all ? does it say that the bootloader is locked ? from trying to restore LG's it sometimes has to be re heated a few times, but yeah if you need to re heat it to get further into the phone then its pretty much a lost cause. the only reason i do it is to remove the data so we can resell the device.
blackcell1 said:
yeah can you access the bootloader at all ? does it say that the bootloader is locked ? from trying to restore LG's it sometimes has to be re heated a few times, but yeah if you need to re heat it to get further into the phone then its pretty much a lost cause. the only reason i do it is to remove the data so we can resell the device.
Click to expand...
Click to collapse
I can get into the andriod screen where you can select recovery and such, with the BL, Baseband product variation and such, where should I go from here?
Oh right, so even once restored to firmware, will it be useless do you think if I can even manage to?
Clarkeofcurtis said:
I can get into the andriod screen where you can select recovery and such, with the BL, Baseband product variation and such, where should I go from here?
Oh right, so even once restored to firmware, will it be useless do you think if I can even manage to?
Click to expand...
Click to collapse
Sorry if you can't access the recovery from the bootloader and its in locked state then your a member of the lovely group of BLOD (bootloader of death) if you hit recovery does it show a little android logo and sit there?
Sorry for the late reply
blackcell1 said:
Sorry if you can't access the recovery from the bootloader and its in locked state then your a member of the lovely group of BLOD (bootloader of death) if you hit recovery does it show a little android logo and sit there?
Sorry for the late reply
Click to expand...
Click to collapse
I believe so, I can just about get into the bootloader at the best of times and when I do I can select options but once proceeding to start said mode phone freezes so can't get into recovery mode :/
Thank you for your continuous help, only way i can get it into bootloader is by heating it up so does that mean for the device to ever work It'll need heat every time? looking like a spares and repairs listing on ebay
Clarkeofcurtis said:
I believe so, I can just about get into the bootloader at the best of times and when I do I can select options but once proceeding to start said mode phone freezes so can't get into recovery mode :/
Thank you for your continuous help, only way i can get it into bootloader is by heating it up so does that mean for the device to ever work It'll need heat every time? looking like a spares and repairs listing on ebay
Click to expand...
Click to collapse
Hello....
How did you manage to get in to EDL mode..? I'm really curious. With stock bootloader? Since you can't access recovery
Also what is exactly displayed in Windows device manager?
You are using an outdated QFil version... It is from 2014 àr 2015.
Do a google search with: QPST_2.7.453.0 . This version seem to be from 2016.
Use the first link from the result. I analysed the files with virustotal, those seem clean or malware...
Also when plugging your usb cord to your PC, does your phone vibrate? Or does the LED blink in red?
You may have to press power button when plugging the usb cord or press power button for a certain amount of time before you plug the usb cord. I'm not completly sure, but your phone may not be in the "proper" EDL state to accept the QFil flash.
Good luck... :good:
Is it possible to send me the guide you used? Thanks.
Clarkeofcurtis said:
Hi there, I've been browsing through the threads related to unbricking of the Nexus 6P stuck in qualcomm hs-usb qdloader 9008 mode, really desperate to get my device working again if even possible however I've tried for about four days now different ways and files and I've had no luck.
My bootloader is locked and no ADB etc managed to get my device showing as the 9008 port so I think it's stuck in EDL.
Following guides, this is the furthest I've yet to get (In screenshot)
Could anyone shed some light and some assistance please? what am I doing wrong!?
Click to expand...
Click to collapse
Hey there sorry for slow replies, will be back on my desktop in an hour I'll send you links for what I followed and such, I think the only reason my device was in EDL mode was due to a hardware fault? As my device is faulty indefinitely as I had to use a hairdryer to warm it up while flashing this then allowed it to enter firehose state which a lot of people seem to error with - after all my attempts and research I'm to velieve there's a fault with the phone itself the only way I could get it to even power up was applying heat to it after removing the back panel
As blackcell said deballing or something? Worked a treat!
Furthest I've managed to get now is into my boot loader however everything is locked - when I press enter recovery my handset just freezes ?
5.1 said:
Hello....
How did you manage to get in to EDL mode..? I'm really curious. With stock bootloader? Since you can't access recovery
Also what is exactly displayed in Windows device manager?
You are using an outdated QFil version... It is from 2014 àr 2015.
Do a google search with: QPST_2.7.453.0 . This version seem to be from 2016.
Use the first link from the result. I analysed the files with virustotal, those seem clean or malware...
Also when plugging your usb cord to your PC, does your phone vibrate? Or does the LED blink in red?
You may have to press power button when plugging the usb cord or press power button for a certain amount of time before you plug the usb cord. I'm not completly sure, but your phone may not be in the "proper" EDL state to accept the QFil flash.
Good luck... :good:
Click to expand...
Click to collapse
Thanks pal if you check last post I wrote about my EDL mode forgot to tag you my apologies, as for my LED I've never seen that light up since I bricked it, even when google logo came up etc and while in the boot loader
Clarkeofcurtis said:
Thanks pal if you check last post I wrote about my EDL mode forgot to tag you my apologies, as for my LED I've never seen that light up since I bricked it, even when google logo came up etc and while in the boot loader
Click to expand...
Click to collapse
Light usually a red LED blink while in proper EDL state as far as I know. Could be something else on the N6P. Well, it looks like you are SOL. Sorry, I don't know what else to say, since you exhausted all possibilities...
Good luck...
My problem is that I can't even try to do the procedure in the other threads that i've read because my pc simples dont recognize anything when i install the qualcomm drivers. Any tips? Thank you in advance. I want to try this thread [GUIDE][QFIL MODE]Unbrick your Le Pro3, tested and working. But simply the qualcomm port doesnt appear in the device manager.
Bad cable or need to reinstall drivers...
marik1 said:
Bad cable or need to reinstall drivers...
Click to expand...
Click to collapse
I tried with two different cables and reinstalled the drivers a few times now. No port in the device manager. Just the Android ADB Interface tha showed when I installed the leeco adb drivers. On the ports just appear the standard Comunication port and printer port. I tried everything, the volume bottons power, etc. The Flash One dont recognize the phone for QFIL.
Say sth more about your phone state and history...
marik1 said:
Say sth more about your phone state and history...
Click to expand...
Click to collapse
I dont have hardware problems. I flashed the Pixel Experience rom in february with sucess but I didnt like it. It had too much battery drain. Then I wanned to try some other rom like AICP. But in the process of flashing something went wrong. I wasnt able to flash it, always gave me the error 7. Then it simply died. I was rebooting TWRP mode and it went dead. Now just vibrates when I try to turn on. I tried the QFIL process (both volumes + power) but I dont even know. How can we know that it in qfil mode? My pc wont recognize anything. Not in Flash One, Not in QPST, nothing. Am I doing something wrong? The phone vibrates so its charged. I installed the Qualcomm drivers properly, I thing, eventhow it doesnt appear the qualcomm 9008 port in the device manager. Its suppose to appear before the phone is pluged right? Thank you for the reply.
I've no idea how to help you... Sorry.
gradim said:
I dont have hardware problems. I flashed the Pixel Experience rom in february with sucess but I didnt like it. It had too much battery drain. Then I wanned to try some other rom like AICP. But in the process of flashing something went wrong. I wasnt able to flash it, always gave me the error 7. Then it simply died. I was rebooting TWRP mode and it went dead. Now just vibrates when I try to turn on. I tried the QFIL process (both volumes + power) but I dont even know. How can we know that it in qfil mode? My pc wont recognize anything. Not in Flash One, Not in QPST, nothing. Am I doing something wrong? The phone vibrates so its charged. I installed the Qualcomm drivers properly, I thing, eventhow it doesnt appear the qualcomm 9008 port in the device manager. Its suppose to appear before the phone is pluged right? Thank you for the reply.
Click to expand...
Click to collapse
Instead of creating a new post why not just read the enormous unbrick forums that exists and have proven steps. Many, Many phones have been debricked using those steps.
Hint, read the last pages for updated links to the software tools needed.
Next, I just found this cable which will help immensely with unbricking your device: https://www.amazon.com/GPG-EDL-Cabl...r1&keywords=edl+cable+for+wall+qualcomm+usb+c
tsongming said:
Instead of creating a new post why not just read the enormous unbrick forums that exists and have proven steps. Many, Many phones have been debricked using those steps.
Hint, read the last pages for updated links to the software tools needed.
Next, I just found this cable which will help immensely with unbricking your device: https://www.amazon.com/GPG-EDL-Cabl...r1&keywords=edl+cable+for+wall+qualcomm+usb+c
Click to expand...
Click to collapse
I've tried four different cables now and nothing. Thank you for minding but I think there isn't a solution for my leeco. Its dead and no one can help him.
Is yours 722?
Sent from my SM-A730F using xda premium
mchlbenner said:
Is yours 722?
Sent from my SM-A730F using xda premium
Click to expand...
Click to collapse
No, x720 6gb ram 64 rom.
gradim said:
No, x720 6gb ram 64 rom.
Click to expand...
Click to collapse
Is your phone completely Dead or do you have fashboot or anything working.
Do have a red flashing light?
Sent from my SM-A730F using xda premium
mchlbenner said:
Is your phone completely Dead or do you have fashboot or anything working.
Do have a red flashing light?
Sent from my SM-A730F using xda premium
Click to expand...
Click to collapse
Completely dead, just vibrates when I press power and yes, I sometimes have the red light, sometimes flashing, sometimes stable.
gradim said:
I dont have hardware problems. I flashed the Pixel Experience rom in february with sucess but I didnt like it. It had too much battery drain. Then I wanned to try some other rom like AICP. But in the process of flashing something went wrong. I wasnt able to flash it, always gave me the error 7. Then it simply died. I was rebooting TWRP mode and it went dead. Now just vibrates when I try to turn on. I tried the QFIL process (both volumes + power) but I dont even know. How can we know that it in qfil mode? My pc wont recognize anything. Not in Flash One, Not in QPST, nothing. Am I doing something wrong? The phone vibrates so its charged. I installed the Qualcomm drivers properly, I thing, eventhow it doesnt appear the qualcomm 9008 port in the device manager. Its suppose to appear before the phone is pluged right? Thank you for the reply.
Click to expand...
Click to collapse
Your phone is probably fixable.
Based on what you stated above, it seems that you downloaded and attempted to install the wrong version of TWRP and now your phone has no recovery at all.
Here is partial instructions I posted in the unbricking forum : https://forum.xda-developers.com/showpost.php?p=76100899&postcount=121
Use those instructions along with is mentioned below. I have personally helped so many people unbrick their phone that I have lost track and this is the reason why the posts are so long and extensive. Because sometimes what works for one person does not work for the next. So I have essentially have taken everyone's great advice and updated the links, made the instructions steps a little more concise and easier to read, fixed some incorrect steps or added the needed skipped steps. Plus added my own research into what I believe is now a definitive guide for unbricking the Leeco variants X720 and X727. The point of not reposting the information here is to keep everything from becoming more fragmented.
Yes, it's possible that you have a hardware issue. But, its also possible that it can be fixed!
Remember that you will not see the port unless you are in EDL mode
Just press volume △ (+) and volume ▽ (–) buttons together while powering the phone on.
It should now be EDL mode. If you cannot get into EDO mode, you cannot do anything else.
If you get an error, press and hold the power button while at the same time hold vol up + and down simultaneously plug the usb cord into the back of the computer while holding the buttons.
Yes, It's a pain and this is why the deep flash cable is handy....it's a special cable ( so your extra cables will do nothing to help you) The deep flash cable will automatically put your phone into EDL mode and allow you to use Flash on.
Install the Qualcomm QDLoader 9008 driver: https://goo.gl/9E3bKq or the from links provided in the unbrick forum.
There are multiple versions or Qfil, some have issues. I posted the correct one that works.
FOR anything else go to that forum read my and everyone else's posts. Again, I keep all of my linked files are up to date, and many are located on my own drives.
You can make one of these cables. Here's a video that shows you how:
https://www.youtube.com/watch v=kSiGsYK66gM&lc=z220yhtqvwyyct21pacdp432sh2xjecek10dae1jen5w03c010c.1524884617336803
it will not be a quick fix.
There are 4 or 5 different unbricking options and it requires persistence and patience.
The good news is that your phone has a solution that may work.
So when your where flashing a rom you got error 7 and your phone went dead.
I had gotten that same error.
Error could mean two things 1) update recovery or update firmware.
My point is sounds nice like hardware issue.
These phones are known for just dieing.
Also getting into that mode you have to push power+volume+volume- at the same time.
Sent from my SM-A730F using xda premium
After trying to update my LG G6 (H870DS) via LG Bridge I got a bootloop issue, with no possibility to go out (even a hard reset was impossible to perform). Then I tried to flash the device using LG Up and stock KDZ file, which result in a cryptic error message in my PC, and a device sudden death. Phone it´s 100% dead, LG Bridge/ LG Up don´t detect the phone, I can´t turn it on (not even download mode). I tried to charge the phone, it becames slightly hot (hope signal?).
The thing is that, for several reasons, I have no warranty, that means I have nothing to lose and I am ready to open the phone, shortcircuit the processor or whatever it could work. Any suguestions what to do now in order to bring the phone back to live?
before you open your phone up, double check you got the right kdz file for your region. Opening the phone up will make it not as waterproof as it should, and probably break something! There is discussions about "uppercut" that might be worth checking out (i don't have experience of this so I can't comment on it).
tweedie said:
before you open your phone up, double check you got the right kdz file for your region. Opening the phone up will make it not as waterproof as it should, and probably break something! There is discussions about "uppercut" that might be worth checking out (i don't have experience of this so I can't comment on it).
Click to expand...
Click to collapse
I can't even find the qualcomm device in the windows device manager. I think I tried to flash the wrong KDZ File:
I flashed H870DS10m_00_OPEN_HK_DS_OP_1019.kdz
and now I think that the correct kdz File for my H870DS HONG KONG was: H870DS10b_00_OPEN_HK_DS_OP_0406.kdz
Uppercut is not detecting my G6 either.
Raziel022 said:
I can't even find the qualcomm device in the windows device manager. I think I tried to flash the wrong KDZ File:
I flashed H870DS10m_00_OPEN_HK_DS_OP_1019.kdz
and now I think that the correct kdz File for my H870DS HONG KONG was: H870DS10b_00_OPEN_HK_DS_OP_0406.kdz
Uppercut is not detecting my G6 either.
Click to expand...
Click to collapse
I read something about complete discharge the phone than connect the cable to lg up and it will be recognized.. Search the thread for the correct way
If you can see download mode then definitely right KDZ file will work try again don't worry
Baijoosharma said:
If you can see download mode then definitely right KDZ file will work try again don't worry
Click to expand...
Click to collapse
I can't access the download mode, the phone is 100% dead, PC does not recognice the phone, I can't turn the phone on in any way (no download mode, nothing) :/
siggey said:
I read something about complete discharge the phone than connect the cable to lg up and it will be recognized.. Search the thread for the correct way
Click to expand...
Click to collapse
I do not know how to discharge a phone which I can not be turn on in any way, any suggestions?
Raziel022 said:
I do not know how to discharge a phone which I can not be turn on in any way, any suggestions?
Click to expand...
Click to collapse
Try this
https://forum.xda-developers.com/android/general/unbrick-lg-model-download-recovery-t3060184
Keep pressing off key asa long as hou can with key one by one charfrrit And hold and press vol* and try To connect lg up
After attempting all your tips I just gived up and go to a repair shop, they just confirmed my suspicion, the phone is a dead device, nothing can be done.
Anyone has something I could try? At this point, doing crazy stuff like short the chip or something like that it's ok for me, I have nothing to lose, any guide will be welcomed.
I suggest u to try to fix it with medusa box or octopus box as final option before openning your device ...
If u will open it .. U can read these guides may help u to have a background about what u goning to ..
As always i wish u luck in your situation because u hardbricked yours .. Wish u luck dude ?
Read this :
https://forum.xda-developers.com/tmobile-lg-g3/help/lg-g3-d851-unbrick-qualcomm-9008-t3430221
This too :
https://www.mylgphones.com/unbrick-...-smart-boot-diag-tool-all-lg-g3-variants.html
This :
https://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091/page1