Dear All
Im stuck at yu logo bootloop. I have gone almost through all posts. And was unable to get a solution.
I bought my phone with Yu os KitKat version. Rooted and installed twrp. Installed resurrection remix and was working fine, except for the battery. So decided to install quake Os. As it is from.android 5.1 . Got stuck at bootloop. So afterwards clean wiped using twrp and installed nitrogen os. Which worked, but no compatible gapps. Then decided to come back to cm11 stock rom. Which again crashed and was having vertical blue line issue which I sorted out by flashing cm13(flash_all.bat file). But still in bootloop. Flashed cm12(flash all) . Still on bootloop. Finally tried ygdp with Yu os reliance jio firmware, again on bootloop. Can someone help me? Is there any solution.
If someone can help, im.sharing my what'sapp number +91.9744.75.7702. hope someone can help me. And I bet all files and links given the posts are now either not working or the downloads has been expire and cannot be downloaded again. So kindly post on the links for a solution.
Thanks in Advance. Hope the moderator can understand my situation.
Related
hi guys
this is singh,i got my lenovo a6000 plus phone 6 months ago i have rooted my phone using king root.then i have flashed lolipop it went good.then after 5 days i flashed Cynagen 11 after that my phone got struck at boot screen as " LENOVO POWERED BY ANDROID ".then i have tried many ADB and flash drives but i was unable to get result same as above mentioned. so,is it my phone is totally bricked or it can be repaired pls reply
Unbrick dead Lenovo A6000 or revert to 4.4.4
Hey,
I tried the method : devs-lab. com/2015/10/how-to-unbrick-dead-lenovo-a6000-plus-or-revert-back-to-kitkat-4-4-4.html Even I bricked my device after installing CM 11. This article helped me unbrick it, very easily. I think CM11 is still buggy. Anyways, stock VibeUI (4.4.4) gives me around 400mb free (after boot 500mb) RAM after unbricking by the above method. :fingers-crossed: Amd yeah, after unbricking you can install OTA updates.
PS: I can't post links. Copy the above link in browser
Regards.
dont wory singh
dont wory singh. do u hav the correct version of cyanogenmod(ie kraft-t or k30-t).
plese check it . then dload the correct version and then using cwm flash....
same happened with me yesterday so i restarted the phone in TWRP and wiped the cache and problem solved and nothing deleted from the phone
Lenovo bricked
Thank u for ur msg I have done the twrp and I got my phone back.but can u tell where can I download a6000 + stock from I got flashed a6000 rom
hi everybody
i'm new at lenovo development thread ,and as i'am bored of laggy a6000 firmware especially after updates i decided to do root and flash custom roms so i did root successfully and installed TWRP recovery and then downloaded Carbon rom and placed it on memory and flashed "CM11 MoStock v1.48 .img"Kernel ,after flashing kernel system couldn't start and stucked on Lenovo logo and i think it's normal as the kernel not compatible with the stock rom so on TWRP i did wipe for data ,cach and dalvik cach and flashed the rom but i'm not sure if it was flashed properly or not it always says at the start of installation "not found MD5 " and after 2 minutes it say successful
after rebooting system it goes on bootloop and now i don't no what i have to do to please help me
http://forum.xda-developers.com/lenovo-a6000/help/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247
You can read my guide on how to fix nearly all software sided problems HERE.
I'd appreciate a Thanks! thrown my way!
try this tutorial
my phone lenovo a6000 once was bricked, and solved with follow those tutorial.
thnx every body i tried to flash another rom "MIUI 8" via recovery and finally it worked well
miz0ooo0 said:
thnx every body i tried to flash another rom "MIUI 8" via recovery and finally it worked well
Click to expand...
Click to collapse
Try using CM 12.1 by ED300.
if we are in any custom rom then how to flash different kernel.
if we directly flash through recovery then phone stuck on lenovo logo.
recently i got an update from redmi about a new software with lollipop so i happily updated my phone from kitkat to lollipop (miui 7.5.2.0) but after updating i was unable to root my device.
i searched many places even i used this software to root "en.miui.com/thread-223314-1-1.html "
but i failed because what happens is after rebooting the mi logo shows up and even after 30 mins there is no progress. so it seems like bootloop but basically this is no bootloop as when i take out my battery and then reinsert it and restart it phone it starts and works fine. but i want to root it
please some senior expert or any developers kindly help me
Flash Custom Recovery Like TWRP..
en.miui.com/thread-228118-1-1.html
Then reboot into recovery and flash UPDATE-SuperSU-v2.46.zip from official site..
download.chainfire.eu/696/supersu/
Work for me..Hope work for you also..
Facing the same problem but still don't get any solution
Same here. I installed the MIUI8 Global Developer ROM and lost the TWRP recovery. The Phone is rooted but not able to re-install TWRP by any means. :/
I heard that Flashing the Fastboot ROM of the smartphone and reverting to MIUI Kitkat is helpful. I am downloading the MIUI 7 Kitkat Fastboot ROM.
Will inform you about the results!
indian_chynnus said:
recently i got an update from redmi about a new software with lollipop so i happily updated my phone from kitkat to lollipop (miui 7.5.2.0) but after updating i was unable to root my device.
i searched many places even i used this software to root "en.miui.com/thread-223314-1-1.html "
but i failed because what happens is after rebooting the mi logo shows up and even after 30 mins there is no progress. so it seems like bootloop but basically this is no bootloop as when i take out my battery and then reinsert it and restart it phone it starts and works fine. but i want to root it
please some senior expert or any developers kindly help me
Click to expand...
Click to collapse
CONFIRMED! If your Redmi is not rooting, then Revert to the MIUI 7 ROM. Flash the MIUI7 Kitkat ROM via Fastboot and then try to Root it. Everything will be fine. I Tried this and it worked.
I have the very latest version of TWRP installed 3.1.0, I did have 3. 0.2, my problem started after installing lineage 14.1, it was working great until I decided to do a factory reset as I was selling to my friend, the phone rebooted as expected, but now the phone only goes into TWRP even after reinstalling a rom of any kind.
How do I fix this please, it's sending me crazy.
Help and advice please TYI
Download and Install stock MM rom using spftools.
Here is the link- https://cloud.mail.ru/public/Cco5/JYk3ytrW1
For further info follow this post- https://forum.xda-developers.com/k3...3-note-k50-t3584564/post71749243#post71749243
Do exactly the post says and you'll get your k3 note in factory mode at the end of the day.
Hi, I have yu yureka plus yu5510a p2 which had stock Android 5.1 with locked bootloader, I have installed cm 12.1 from Rohit Jaiswal method. now after 2 months my device is keeps rebooting on yu logo even after flashing stock cm and whenever I try to flash via ygpd tool, it's not even getting detecting in that tool but device manager shows Android bootloader interface. Any solution for this?
any1 here? guys?
Happens with me also not also flashing any roms
Here is the fix. You don't need to change ROM or battery
https://m.youtube.com/watch?v=Q60ZkevoESc
I tried but messedup with it
siddhesh9146 said:
Hi, I have yu yureka plus yu5510a p2 which had stock Android 5.1 with locked bootloader, I have installed cm 12.1 from Rohit Jaiswal method. now after 2 months my device is keeps rebooting on yu logo even after flashing stock cm and whenever I try to flash via ygpd tool, it's not even getting detecting in that tool but device manager shows Android bootloader interface. Any solution for this?
Click to expand...
Click to collapse
Hi , flash twrp..
and install stable ROM... I had used Resurrection Remix OS with volte update. Its great. You too give a try