XT1687 running NPN25.137-83 - OTA update - Moto G5 Plus Questions & Answers

Hey guys,
My G5+, which is running NPN25.137-83, rooted with Magisk, TWRP, Xposed just prompted me for an OTA update.
I'm guessing if i try to update i'll (best case scenario) break something, worst case brick my phone.
I'm running Aug2017 security patch.
This OTA update says it includes Security updates till Nov2017 + Stability improvements.
Any suggestions? Thanks!

seed_87 said:
Hey guys,
My G5+, which is running NPN25.137-83, rooted with Magisk, TWRP, Xposed just prompted me for an OTA update.
I'm guessing if i try to update i'll (best case scenario) break something, worst case brick my phone.
I'm running Aug2017 security patch.
This OTA update says it includes Security updates till Nov2017 + Stability improvements.
Any suggestions? Thanks!
Click to expand...
Click to collapse
Do not apply the update, it will end up failing as you have TWRP installed, but every time you restart your phone, it will boot to TWRP and then you'll have to reboot from TWRP to bootloader and then system. Anyways, I recommend waiting until the OP of the TWRP flashable stock thread updates the links with that update and then flash the update via TWRP. Make sure you go into developer options and turn off automatic updates. You can also use an app to freeze Motorola update service if you don't want to be notified about the update.

jeffsga88 said:
Do not apply the update, it will end up failing as you have TWRP installed, but every time you restart your phone, it will boot to TWRP and then you'll have to reboot from TWRP to bootloader and then system. Anyways, I recommend waiting until the OP of the TWRP flashable stock thread updates the links with that update and then flash the update via TWRP. Make sure you go into developer options and turn off automatic updates. You can also use an app to freeze Motorola update service if you don't want to be notified about the update.
Click to expand...
Click to collapse
Per the TWRP flashable stock thread guide, I downloaded the OTA and shared the zip there
Thanks @jeffsga88! I will disable automatic updates to avoid any accidents.

Related

OTA update with Magisk

Hi guys! I'm on stock rom Nougat, since i installed magisk i'll always get error when i tried to update my phone from Update setting (samsung things...).
But when i installed Xposed and especially a module known as Firefds which set fake system status to "Official" (it was "Custom"), when i go back to check for a new update i found this (attachement).
So what do you think guys? Should i update? Maybe its November security patch...
But i don't want to lose twrp, magisk and all the stuff !!
This update didn't includes November patch so far I know. This will be listed in the patch notes for sure.
If you install the OTA update...this will end not well I think. You will running in an unstable system because of root, twrp etc. This update will replace files which are eventually needed and so on.
I suggest you flash stock rom with odin, then install the update then re-root and re-flash twrp. Yes it is annoying, but its better to be safe than sorry
zzThrain said:
I suggest you flash stock rom with odin, then install the update then re-root and re-flash twrp. Yes it is annoying, but its better to be safe than sorry
Click to expand...
Click to collapse
What about flash this update using FlashFire and keep twrp & magisk? I saw it in many other phones
Mrbinki said:
What about flash this update using FlashFire and keep twrp & magisk? I saw it in many other phones
Click to expand...
Click to collapse
You can of course do so...but my experience is that such methods will not end well. Do it like @zzThrain wrote it and download firmware from SamMobile with DQJ3 and reflash twrp and re-root to be sure that your system don't come unstable.
Any chance for OTA updates with Magisk only (without Xposed, etc.)?
If there is no chance - is there a place to download only monthly security updates - since full firmware versions (found at sammobile) are at least 10x times larger than the monthly updates?

MetroPCS OTA Update

My MetroPCS Moto E4 was just prompted with an OTA update, NCQ26.69-46-5-4. It says it's an update to include Android security updates through January 1, 2018.
I've got TWRP installed, and I'm rooted with Magisk, but I'm still on the stock ROM. I've been holding off to install Lineage until after the bump to 15.1, and (hopefully) "official" status.
Has anybody taken the OTA yet? If so, can you confirm that TWRP and Magisk still work?
OTA Release Notes:
https://mobilesupport.lenovo.com/us/en/solution/ms126534
wrkerr said:
My MetroPCS Moto E4 was just prompted with an OTA update, NCQ26.69-46-5-4. It says it's an update to include Android security updates through January 1, 2018.
I've got TWRP installed, and I'm rooted with Magisk, but I'm still on the stock ROM. I've been holding off to install Lineage until after the bump to 15.1, and (hopefully) "official" status.
Has anybody taken the OTA yet? If so, can you confirm that TWRP and Magisk still work?
OTA Release Notes:
https://mobilesupport.lenovo.com/us/en/solution/ms126534
Click to expand...
Click to collapse
You're going to have to jump through a few hoops to take that ota. I know there are methods for pixels and nexus' for doing it, but they likely won't work on this device.
Probably gonna have to backup your data, then flash the stock firmware, re root and restore data. But there shouldn't be any reason twrp won't work after updating.

Is it safe to OTA install updates while rooted and magisk?

I rooted my phone and use magisk modules too. New update appeared, am I safe to install it OTA? Will I lose root or magisk if I update?
Tomogitarist said:
I rooted my phone and use magisk modules too. New update appeared, am I safe to install it OTA? Will I lose root or magisk if I update?
Click to expand...
Click to collapse
The update won't go through and you will encounter an installation problem error. Revert back to the stock boot.img of your security patch month (e.g. January, Feb patch) and then try the OTA and you should be able to update.
Google "how to apply OTA with Magisk" if you haven't touched the system partition. But no it is not safe, I bootlooped.
It is safe. OTA updates system partition. Magisk uses boot partition.
In other hand if you ever mounted system as read AND WRITE even if you didn't make any change to it the OTA will fail.
OTA also will fail if detects boot partition modification, what means you'll have to temporally restore boot (uninstall Magisk) to update and then reinstall it. You'll find how to in this forum.

B355 Update

Firmware Finder shows there's a new update available for my BTV-W09. It's B355 dated 06/05/18. It's a small OTA, only 190mb. Has anybody installed it? Does anybody know what's in it?
Firmware Finder provides the changelog. It has the June security patches.
No netflix hd update? ****!
How install? I don't remember. [emoji28]. Thanks in advance.
Enviat des del meu ONEPLUS A6003 usant Tapatalk
Anyone have any luck applying this update with TWRP recovery? Looks like it is going to require a flash back to stock to apply?
I was only able to install it with stock. Even then, it had to be the full install, not the OTA update. That install locks the bootloader and unroots; so I then had to re-unlock, which of course wipes the entire device, and then restore from a Google and Titanium backup. Not sure updating is worth the pain. really.
My rooted tab is now threatening to install this update when I reboot. Does anybody remember how to stop a firmware update when it wants to update on reboot?
I don't think there's much to worry about as if you're rooted with TWRP, it'll just reboot into TWRP and wait for you to manually apply it, if you can find it on the file system.
I'm currently trying to apply B356 which was recently released. This minor update contains the July 2018 Google security patches. The last time I did this from B351, this is what I did:
Via TWRP, Installed the 2 full OTA zip files for B352 downloaded with firmwarefinder. This replaced TWRP with the stock recovery but did not wipe my data.
Rebooted, and applied B353 via the normal OTA through settings. This installed the B353 full package (2.52GB).
Reinstalled TWRP with fastboot (twrp_BTV-W09_5_greatslon.img)
Booted to TWRP & installed Magisk
Re-enabled the 5GHz wifi radio
However, this doesn't seem to be working with B356 thus far. Installing the Firmwarefinder zip files failed (at least update.zip did, I didn't try the other two) so I installed the FF B352 images mentioned above. However, applying the stock OTA through settings wants to install 3 patches (B353, June 18, July 18) of size 786MB. They downloaded successfully but then it fails to apply during the reboot.
Anyone else have any luck? What did you wind up doing?
Thanks!
Every time I've applied an update, I ended up locking the bootloader and then having the phone wiped when I unlock the bootloader. I'd love to find a way to update without locking the bootloader. If you find a way to that with this update, please let post how you did it!

Mia1 April OTA Update couldn't install - installation problem

Helpp!! I am running my STOCK ROM Android Pie March Update 2019. Previously, I decided to root my phone via Magisk, and then I unroot it today because I need to get the OTA update so I unrooted it.
I selected from the Magisk, restore images because I think when you choose completely uninstall you're going to bootloop because you're going to flash a stock and clean boot.img from the March 2019 Update.
After unrooting it, my phone is not a rooted, i even checked it via Root Checker on playstore and the result is not rooted.
Now, I am trying to install April 2019. I tried to factory reset my phone via settings and still the OTA update wont work.
It says -> Couldn't update, installation problem.
Would you help me please?? Thanks!
I had the same problem flashed the latest update from here via twrp and now my phone is updated.
bahabo64 said:
I had the same problem flashed the latest update from here via twrp and now my phone is updated.
Click to expand...
Click to collapse
I guess I am going to flash the new update, thank you for the reply!
Yeah, flashing latest the new update via TWRP on the link that you given to me works. Thank you again!

Categories

Resources