now the cell phone only has a black screen and nothing else happens
Take to service center as your first boot bricked, your boot has to be repaired by some boot repairing tool
Related
When I put X rom (any) to the cell worked well for first then she began to have reboots and doesnt recognize the touch. Even entered recovery but eventually I got bored and try to repair with ODIN and was worse because I got brick, he did not exceed bootlogo
Finally repaired again with SmartSwitch (similar to Kies) and shows the welcome and everything but does not recognize the touch and continues restarts
No enters to recovery or installing a custom recovery
I doubt Samsung enforce the guarantee by knox
PD sorry4myenglish
Hiya I managed to brick my d802 after wipng from twrp I believe.
It seems hard bricked and nothing is working, all the happens when I boot is that i gets stuck in the LG logo. If I try download mode its not working, and impossible to boot into recovery mode, when I hit the power button all it shows is "charging! ??/100" in a yellow font in download mode
Its not showing up in windows device manager as anything but "charging" also tried the guide on short circuiting the connections on the processor and its not responding to that also.
Ive attracted a link to a screenshot of the charging error. any advice is appreciated.
https://drive.google.com/file/d/1OO6...ew?usp=sharing
If it's stuck in LG logo, it's possible to turn it off completely, put it in download mode with a computer and flash a stock kdz. No need to fry the transistors.
My device restarted and after a software update and got stuck on a boot loop. I was able to get the phone initially into download mode as I thought I would try flashing it with ODIN back to the previous firmware. But since I haven't been to Sammobile in years, I didn't realize that the download would take hours.
So i tried force rebooting the phone again (vol down+power) in the meantime and nothing happened it was still stuck on the boot screen. So I left the phone connected to the charger and after a while I saw that it was back in downloading mode (but no ODIN mentioned in the top left corner)? I thought that was strange and since I had the download ready to flash, thought to make sure it was in download mode (proper) by pressing power+vol down+home. But this time the screen went black and now seems to be hard bricked and completely unresponsive (with only the blinking blue led) -. I've scoured the interent and the consensus seems to be that a USB jig won't work, will try it though. I'm really looking for an unbrick image to try booting it from the SD card. Would really appreciate the help! I've already tried the adb reboot download etc, but my computer and another one doesn't seem to detect the device. Please help!
Hello friends, I have a pretty specific issue with my Mi A1. My phone suddenly stopped booting and doesn't launch. No matter which buttons I press. When I connect the charger, the blue LED starts blinking and it keeps blinking as long as the charging cable is connected.
I looked at previous forum posts and tried all the solutions but none of them worked for me. However, when I connect the phone to a computer, I get the Qualcomm 9008 mode and when I try to flash a fastboot ROM using MiFlash it actually flashes normally and shows "Success".
Since the phone is able to flash a ROM normally, could this be a faulty LCD screen? Or is this an issue with a faulty motherboard or something else?
if it shows 9008 then its in edl mode when u flash the rom press power on button for 10 to 15 seconds for booting it. and if it won't boot then i think its some kind of hardware issue
I was trying to flash A1 ROM to my 5X
Then flashed the A1 firmware in：https://forum.xda-developers.com/t/firmware-5x-and-a1-firmwares.3719909/
Out of expection, my phone immediately rebooted right after the flashing process completes, without flashing the modded recovery
So my phone became a black brick at the moment
I know clearly how to enter 9008 mode, because I've already unbricked the 5X with 9008 once just half an hour ago
but to my surprise, instead of successfully enter 9008 mode, the 5X started vibrating endless when I connect it to PC
I pulled out the cable, the vibration stopped
Connected again, vibration comes back
Remove and re-install the battery, press the power button, same vibration, nothing shows up on screen or the PC
Please HELP！！！