I have been trying to root my phone. I have been have problems with twrp. I have installed twrp through both the moto g5 plus toolkit and manually(command prompt and adb/adb fastboobt). I have had several problems with twrp. Firstly I can't seem to install it without wiping everything off my phone. Secondly twrp won't install stock rom, flash zip files and sometimes img files. Thirdly It keeps failing to mount data.
Every time I install TWRP I have to use the moto g5 plus toolkit flash stock rom so I can use my phone.
After flashing twrp I reboot to recovery mode, go to wipe, then "swipe to factory reset." I the go to reboot or reboot to recovery. Most of the installation instruction regarding twrp say to do this. The problem is I have to install/re-install stock rom in my phone via the toolkit because there is nothing on my phone but a twrp after I swipe factory reset an I can't get twrp to install stock rom.
Since I can't get twrp to install stock rom from a zip file I have to use the moto g5 plus toolkit which wipes twrp and flashes the stock rom.
After flashing stock rom I tried again and was prompted for a password. I don't have password and there was something about decryption on the screen. I hit cancel went to Wipe then Format Data and typed yes at the prompt. I went to reboot hit recovery(reboot to recovery). My phone was wiped clean and I had nothing but twrp on it again. I tried install stock rom off my sd but I got allot of errors( can't mount data, ect...) I tried to fix this by using twrp to flash an install img of the latest version of twrp. This did not fix the problem.
I can't use twrp to install stock rom, or zips nor can I install twrp without having to flash stock rom and erase twrp from my phone because installing twrp removes everything and renders my phone useless. Every time I install twrp I'm left with nothing but twrp on my phone. Everything is wiped there is nothing there but twrp.
Could someone please tell me how to install twrp without wiping my phone completely and how to get around the problems I have been having. I have tried several different things but I can't fix the mount error nor can I get twrp to install stock rom. I just can't figure this out.
I have attached several screenshot below. If you are willing to help please take a look at them.
first of all stop using that toolkit. if you were flashing stock rom the right way you wouldnt be replacing recovery.
follow these steps PRECICELY
1. download the actual stock xml.zip and extract it
2. inside the folder make a txtfile called flash rom and rename it to flashrom.bat
2a. right click and select edit, paste this into notepad ans save it (as a .bat --important)
Code:
@echo off
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash boot boot.img
mfastboot flash recovery twrp.img
mfastboot flash dsp adspso.bin
mfastboot flash oem oem.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot flash recovery twrp.img
mfastboot oem fb_mode_clear
pause
mfastboot reboot
3. https://forum.xda-developers.com/attachment.php?attachmentid=2427667&d=1385958280 download this and extract all files into where the stock xml.zip is extracted
4. place the twrp youre trying to use (should be the 64bit one from the 64bit thread) in the place you extracted the xml.zip named twrp.img
5. double click the batch file (flash rom.bat) and let it finish (ignore any errors about signature verification and/or corrupt image). when the flash is done it will say "press any key to continue" once you press a key it will reboot your phone, MAKE SURE YOU ARE HOLDING VOLUME DOWN WHILE YOUR PHONE REBOOTS FOR THE FIRST TIME AFTER THE FLASH
6. at this point you WILL have twrp, AND STOCK ROM. THIS IS A PROBLEM. stock rom will replace twrp at first boot, heres how to solve that, first by decrypting data:
6A. wipe cahce SPECIFICALLY by going to wipe, selecting advanced wipe, check cache, and then tap repair or change file system. then tap change file system then ext4 and swipe to apply
6B go back to twrp's main menu and tap reboot>recovery
6C. once back in recovery wipe data SPECIFICALLY by going to wipe, selecting advanced wipe, check data, and then tap repair or change file system. then tap change file system then f2fs and swipe to apply; reboot to recovery again
7. at this point you are running stock rom, decrypted, and have twrp BUT STOCK ROM WILL STILL REPLACE TWRP IF YOU BOOT, the easiest way to do this is by flashing magisk.
thats it, you should be at stock rooted decrypted with magisk and twrp.
8. come back if that doesnt work. but it should, i literally did the whole process while writing this to make sure i didnt steer you in the wrong direction
Ae3NerdGod said:
2. make a txtfile inside the folder called flash rom and rename it to flashrom.bat
Click to expand...
Click to collapse
The stock rom I downloaded doesn't have a folder call flash rom in it. Is the folder you extracted the Stock Rom called flash rom or should there be a folder called flash rom be in my extracted stock rom folder.
place the twrp youre trying to use (should be the 64bit one from the 64bit thread) in the place you extracted the xml.zip named twrp.img
Click to expand...
Click to collapse
I don't have an xml.zip name twrp.img. I have an image file.(img) not a zip name twrp.img. Did you mean place the twrp image file into the extracted xml.zip.
Would it be easier to place the replace the recovery.img in the extracted xml.zip with the twrp.img and then rename the twrp.img recovery(basicaly replace the recovery.img in the zip with twrp).
no, name the txtfile flash rom, i see the ambiguity though. ill reword it:
inside the folder make a txtfile called flash rom and rename it to flashrom.bat
Click to expand...
Click to collapse
also i meant to name the twrp image file you are using to "twrp.img" and drop it in the folder that contains all the files youve extracted from the xml.zip
and no, it wouldnt be easier because the batch file i wrote flashes "twrp.img" to recovery
attached is roughly what your xml.zip directory should look like (ive deleted a couple unneeded files you do not have to also)
I did everything correctly however when I run the batch file(flashrom.bat) the command prompt displays <waiting for device> and nothing happens.
I have developer setting enabled and usb debugging and my boot loader is unlocked(oem unlocking enabled). I have all the correct drivers for my phone and adb installed on my computer. I do not know why it cannot detect my phone.
:|
Why make it difficult and act like a ****. There no reason to make a .bat file or removing anything. Keep it simple FFS.
This >>> "mirrors . lolinet.com /firmware /moto /potter /official /RETAIL /POTTER_RETAIL_ 7.0_NPN25.137-92 _cid50_subsidy- DEFAULT_regulatory-DEFAULT_CFC .xml .zip" is the Nov 1st firmware for retus, assuming you have that. Extract "mega . nz / #!dqwE1ZJT!OA9N1pxNnDAs9UVkeiVKoVIkvSrZQNWUyKvtORB3" to your desktop for easy access, they are standalone adb/fastboot files. Now take the firmware and extract that into the folder with the adb/fastboot files. Press Shift+Right-click in the folder and choose "open command window here." Make sure you're phone is connected to your PC in bootloader mode. Run "adb shell" and let adb load. Then run "fastboot devices" to assure your device is being discovered. Now you can start manually entering or copy+pastaing the commands to install the firmware one line at a time after the previous command finishes. If you get an error after the "fastboot reboot" reboot, turn your phone off and on again. It should boot up just fine.
EXTREMELY sorry for breaking up the links. I'm not a huge poster and XDA only allows links after 10 posts. so just rebuild the links with h t t p s : / / ahead of them. Stupid rules.
I literally just did this myself because I'm unlocked with a custom kernal, so I do OEM updates manually. It's a slightly tedious task but you can see that everything is installs properly.
If you're not on retus, my time isn't in vein, we can find get the firmware for your device. Here's the commands: Some might say parts are unnecessary, but when you're not sure what's what, it's best to stick with the normal commands.
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
ALSO: Install twrp after you've booted up once, not with the firmware. To make it simple drop the twrp.img into its own folder with the adb/fastboot files, run command prompt with the folder the same way you did before and enter these commands:
adb shell
fastboot devices
fastboot flash recovery twrp.img
fastboot reboot recovery
If theres's s password when twrp loads, cancel writing and wipe your data only. Then reboot back into TWRP again before rebooting the system.
Hope this helps and goes smooth for you.
User0666 said:
Extract "mega. nz/#!dqwE1ZJT!OA9N1pxNnDAs9UVkeiVKoVIkvSrZQNWUyKvtORB3"
Click to expand...
Click to collapse
When I go to the above site I get a message asking for a Decryption Key. I don't know what the decryption key is. You a said that the download was a standalone add/fastboot package. Is the stand alone files you were referring to the same as the googles standalone platform-tools for Android.
Also my moto g5 plus is on retus but it is currently running on Potter NPN 25.137-35. I am going to assume that firmware you said to use(Potter NPN 25.137-92) will work.
Ae3NerdGod said:
first of all stop using that toolkit. if you were flashing stock rom the right way you wouldnt be replacing recovery.
follow these steps PRECICELY
1. download the actual stock xml.zip and extract it
2. inside the folder make a txtfile called flash rom and rename it to flashrom.bat
2a. right click and select edit, paste this into notepad ans save it (as a .bat --important)
Code:
@echo off
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash boot boot.img
mfastboot flash recovery twrp.img
mfastboot flash dsp adspso.bin
mfastboot flash oem oem.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot flash recovery twrp.img
mfastboot oem fb_mode_clear
pause
mfastboot reboot
3. https://forum.xda-developers.com/attachment.php?attachmentid=2427667&d=1385958280 download this and extract all files into where the stock xml.zip is extracted
4. place the twrp youre trying to use (should be the 64bit one from the 64bit thread) in the place you extracted the xml.zip named twrp.img
5. double click the batch file (flash rom.bat) and let it finish (ignore any errors about signature verification and/or corrupt image). when the flash is done it will say "press any key to continue" once you press a key it will reboot your phone, MAKE SURE YOU ARE HOLDING VOLUME DOWN WHILE YOUR PHONE REBOOTS FOR THE FIRST TIME AFTER THE FLASH
6. at this point you WILL have twrp, AND STOCK ROM. THIS IS A PROBLEM. stock rom will replace twrp at first boot, heres how to solve that, first by decrypting data:
6A. wipe cahce SPECIFICALLY by going to wipe, selecting advanced wipe, check cache, and then tap repair or change file system. then tap change file system then ext4 and swipe to apply
6B go back to twrp's main menu and tap reboot>recovery
6C. once back in recovery wipe data SPECIFICALLY by going to wipe, selecting advanced wipe, check data, and then tap repair or change file system. then tap change file system then f2fs and swipe to apply; reboot to recovery again
7. at this point you are running stock rom, decrypted, and have twrp BUT STOCK ROM WILL STILL REPLACE TWRP IF YOU BOOT, the easiest way to do this is by flashing magisk.
thats it, you should be at stock rooted decrypted with magisk and twrp.
8. come back if that doesnt work. but it should, i literally did the whole process while writing this to make sure i didnt steer you in the wrong direction
Click to expand...
Click to collapse
I'm in a similar position... how ever I have no issue mounting my phone. I follow your steps to the T and I end up with my phone failing to load the operating system....Can you please let me know what I can do? I'm on the XT1687. If I try to flash other roms I get a TWRP error 255...
---------- Post added at 12:02 PM ---------- Previous post was at 11:49 AM ----------
bboygmoney said:
I'm in a similar position... how ever I have no issue mounting my phone. I follow your steps to the T and I end up with my phone failing to load the operating system....Can you please let me know what I can do? I'm on the XT1687. If I try to flash other roms I get a TWRP error 255...
Click to expand...
Click to collapse
OMG If you were here I'd kiss you!!!! Fixed. Had to wipe system then I believe i had the wrong firmware....Thank you soo!!!!!!!!
I followed the instructions, but I can't boot to anything except TWRP. No matter what I select in the reboot menu, the phone reboots to TWRP.
salsolomon said:
I followed the instructions, but I can't boot to anything except TWRP. No matter what I select in the reboot menu, the phone reboots to TWRP.
Click to expand...
Click to collapse
Open up adb command window and type these three commands,
Code:
adb devices
adb shell
dd if=/dev/zero of=/dev/block/platform/soc/7824900.sdhci/by-name/misc
Then reboot.
Related
Follow at your own risk. Unlocked bootloader required.
This is how I was able to fix my softbrick after updating to -64 on my US XT1625 Amazon G4. Credit goes to Android Doctor (his YouTube tutorial), I changed his fastboot commands a little though to better match how a real Moto upgade would act (based off of the flashfile.xml file in the firmware zip).
From here download "XT1625_ATHENE_AMAZON_MPJ24.139-64_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip" (Here's a direct link if it works for you).
Extract that zip to a folder and copy ADB/fastboot files to that folder. Navigate or open a command prompt window to that directory. Boot your phone into fastboot (power it off and power it back on holding the volume down key or just run "adb reboot bootloader" if you're in recovery). Run the following commands from the command prompt window when your phone is in the bootloader and your command prompt window is navigated to the folder you extracted XT1625_ATHENE_AMAZON...zip to (you can also copy and paste them all into command prompt):
Running the below commands unmodified will wipe your data. You can try to run them without the "fastboot erase userdata" command at the bottom to possibly save your data (I can't guarantee anything).
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img_sparsechunk.0
fastboot flash oem oem.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Again, I give no guarantees on this and probably won't be checking back on this thread for replying or updating. Also note, Amazon ads will return to your lock screen.
beano311 said:
Follow at your own risk.
This is how I was able to fix my softbrick after updating to -64 on my US XT1625 Amazon G4. Credit goes to Android Doctor (his YouTube tutorial), I changed his fastboot commands a little though to better match how a real Moto upgade would act (based off of the flashfile.xml file in the firmware zip.
From here download "XT1625_ATHENE_AMAZON_MPJ24.139-64_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip" (Here's a direct link if it works for you).
Extract that zip to a folder and copy ADB/fastboot files to that folder. Navigate or open a command prompt window to that directory. Boot your phone into fastboot (power it off and power it back on holding the volume down key or just run "adb reboot bootloader" if you're in recovery). Run the following commands from the command prompt window when your phone is in the bootloader and your command prompt window is navigated to the folder you extracted XT1625_ATHENE_AMAZON...zip to (you can also copy and paste them all into command prompt):
Running the below commands unmodified will wipe your data. You can try to run them without the "fastboot erase userdata" command at the bottom to possibly save your data (I can't guarantee anything).
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img_sparsechunk.0
fastboot flash oem oem.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Again, I give no guarantees on this and probably won't be checking back on this thread for replying or updating. Also note, Amazon ads will return to your lock screen.
Click to expand...
Click to collapse
Will this work on a locked bootloader?
Mathracer1 said:
Will this work on a locked bootloader?
Click to expand...
Click to collapse
I think not. Check out the youtube link I posted. The first thing you see in the video description is "UNLOCKED BOOTLOADER REQUIRED BEFORE DOING THIS THIS,UNLOCKED BOOTLOADER RQUIRED BEFORE DOING THIS, UNLCOKED BOOTLOADER REQUIRED BEFORE DOING THIS". I'll update the main post to reflect this.
I tried this with a unlocked bootloader and it worked.
I then locked the bootloader at the last step. However, the software status still shows "modified". How do I make it official?
SemiConductor said:
I tried this with a unlocked bootloader and it worked.
I then locked the bootloader at the last step. However, the software status still shows "modified". How do I make it official?
Click to expand...
Click to collapse
I don't think there is a way of relock. Well, whatever you do and whatever you see on the screen or your PC says it has been locked again, the hardware counter tells the bootloader has been unlocked once. I read this from somewhere else on the internet. Correct me if it is wrong.
beano311 said:
I think not. Check out the youtube link I posted. The first thing you see in the video description is "UNLOCKED BOOTLOADER REQUIRED BEFORE DOING THIS THIS,UNLOCKED BOOTLOADER RQUIRED BEFORE DOING THIS, UNLCOKED BOOTLOADER REQUIRED BEFORE DOING THIS". I'll update the main post to reflect this.
Click to expand...
Click to collapse
Yes! its able to flash whith Locked Bootloader, but only flash oem, system, recovery, non-hlos, cache, userdata, flash boot, bootloader,gpt, always because a locked bootloader
Lussardi said:
Yes! its able to flash whith Locked Bootloader, but only flash oem, system, recovery, non-hlos, cache, userdata, flash boot, bootloader,gpt, always because a locked bootloader
Click to expand...
Click to collapse
Please could you specify better that I should install, I am desperate :llorando:
stephydth said:
Please could you specify better that I should install, I am desperate :llorando:
Click to expand...
Click to collapse
Code:
only flash oem, system, recovery, non-hlos, cache, userdata, boot, bootloader
download firmware zip extract and flash above mentioned
Hi,
I was flashing many different ROMs in attempt to find a solution to something I was trying to accomplish. In the end, I gave up and decided to go back to stock. I used this instruction to revert back to stock: http://forum.xda-developers.com/moto-x-style/development/pure-firmware-tuff-wip-t3224833
I followed the instruction under Android 6.0, MPH24.49-18-3 FIRMWARE that said to do:
fastboot flash partition gpt.bin
fastboot reboot bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot reboot
I remember when flashing system, there was an invalid sparse header message, but it kept going, so I let it. After that I rebooted bootloader and flashed TWRP again. I then rebooted bootloader once more and entered TWRP. There, I proceeded normally. But then I realized that there was something wrong when I couldn't do the full wipe. I went to look in the mount setting and saw that TWRP was not able to mount internal. The internal was also listed as 0MB. I'm guessing that I need to re-partition/format the internal (or I don't know what I'm talking about lol). Either way, I'm now unable to flash a ROM. Can someone please help me?
Thank you in advance.
try http://forum.xda-developers.com/moto-x-style/development/windows-tool-moto-x-style-pure-edition-t3199905
then flash android 6.0 maybe trupure 2.9 and then get the modem from trupure and flash it
goldentequila said:
Hi,
I was flashing many different ROMs in attempt to find a solution to something I was trying to accomplish. In the end, I gave up and decided to go back to stock. I used this instruction to revert back to stock: http://forum.xda-developers.com/moto-x-style/development/pure-firmware-tuff-wip-t3224833
I followed the instruction under Android 6.0, MPH24.49-18-3 FIRMWARE that said to do:
fastboot flash partition gpt.bin
fastboot reboot bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot reboot
I remember when flashing system, there was an invalid sparse header message, but it kept going, so I let it. After that I rebooted bootloader and flashed TWRP again. I then rebooted bootloader once more and entered TWRP. There, I proceeded normally. But then I realized that there was something wrong when I couldn't do the full wipe. I went to look in the mount setting and saw that TWRP was not able to mount internal. The internal was also listed as 0MB. I'm guessing that I need to re-partition/format the internal (or I don't know what I'm talking about lol). Either way, I'm now unable to flash a ROM. Can someone please help me?
Thank you in advance.
Click to expand...
Click to collapse
Its incomplete comanda... Where is the main spunk files??
These are the main firmware files
---------- Post added at 04:06 PM ---------- Previous post was at 04:00 PM ----------
goldentequila said:
Hi,
I was flashing many different ROMs in attempt to find a solution to something I was trying to accomplish. In the end, I gave up and decided to go back to stock. I used this instruction to revert back to stock: http://forum.xda-developers.com/moto-x-style/development/pure-firmware-tuff-wip-t3224833
I followed the instruction under Android 6.0, MPH24.49-18-3 FIRMWARE that said to do:
fastboot flash partition gpt.bin
fastboot reboot bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot reboot
I remember when flashing system, there was an invalid sparse header message, but it kept going, so I let it. After that I rebooted bootloader and flashed TWRP again. I then rebooted bootloader once more and entered TWRP. There, I proceeded normally. But then I realized that there was something wrong when I couldn't do the full wipe. I went to look in the mount setting and saw that TWRP was not able to mount internal. The internal was also listed as 0MB. I'm guessing that I need to re-partition/format the internal (or I don't know what I'm talking about lol). Either way, I'm now unable to flash a ROM. Can someone please help me?
Thank you in advance.
Click to expand...
Click to collapse
Its incomplete comanda... Where is the main spunk files??
These are the main firmware files
Check all the files that u have flashed
goldentequila said:
Hi,
I was flashing many different ROMs in attempt to find a solution to something I was trying to accomplish. In the end, I gave up and decided to go back to stock. I used this instruction to revert back to stock: http://forum.xda-developers.com/moto-x-style/development/pure-firmware-tuff-wip-t3224833
I followed the instruction under Android 6.0, MPH24.49-18-3 FIRMWARE that said to do:
fastboot flash partition gpt.bin
fastboot reboot bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot reboot
I remember when flashing system, there was an invalid sparse header message, but it kept going, so I let it. After that I rebooted bootloader and flashed TWRP again. I then rebooted bootloader once more and entered TWRP. There, I proceeded normally. But then I realized that there was something wrong when I couldn't do the full wipe. I went to look in the mount setting and saw that TWRP was not able to mount internal. The internal was also listed as 0MB. I'm guessing that I need to re-partition/format the internal (or I don't know what I'm talking about lol). Either way, I'm now unable to flash a ROM. Can someone please help me?
Thank you in advance.
Click to expand...
Click to collapse
Find 18-4 firmware, it's newer anyway... the sparse chunk size error is the problem, the system.img file in that firmware file is too large for the phone to flash via fastboot (thus, it probably isn't an official image, or it's an image for the engineering flash tool, not fastboot). The proper image file with have 6-11 sparce chunks you need to flash individually.
acejavelin said:
Find 18-4 firmware, it's newer anyway... the sparse chunk size error is the problem, the system.img file in that firmware file is too large for the phone to flash via fastboot (thus, it probably isn't an official image, or it's an image for the engineering flash tool, not fastboot). The proper image file with have 6-11 sparce chunks you need to flash individually.
Click to expand...
Click to collapse
I think i made it worse lol... Because I was getting many errors (random reboots), I decided to do a full wipe to install a ROM fresh. When wiping in TWRP, I accidentally wiped "internal" too. I'm guessing that I need to do something to correct this before I can flash 18-4 firmware. Please let me know if you know what I need to do. Thank you.
goldentequila said:
I think i made it worse lol... Because I was getting many errors (random reboots), I decided to do a full wipe to install a ROM fresh. When wiping in TWRP, I accidentally wiped "internal" too. I'm guessing that I need to do something to correct this before I can flash 18-4 firmware. Please let me know if you know what I need to do. Thank you.
Click to expand...
Click to collapse
TWRP shouldn't be a part of this, nor should it matter whats on your internal storage, this is all done with fastboot.
Factory reset in stock recovery, reboot to bootloader, then flash the complete image with fastboot.
Sagar_1401 said:
Its incomplete comanda... Where is the main spunk files??
These are the main firmware files
---------- Post added at 04:06 PM ---------- Previous post was at 04:00 PM ----------
Its incomplete comanda... Where is the main spunk files??
These are the main firmware files
Check all the files that u have flashed
Click to expand...
Click to collapse
The instruction in that post said to not worry about the sparse error message, so I went with it. This is what the post said.
"You may notice a "sparse header error" when flashing at the beginning. Don't worry about it, all is well. The current AutoFlashFirmware.bat file doesn't work with this Firmware file. Flash the files manually!"
Also, i posted above too, but I just accidentally wiped internal via TWRP too. Do you know what I need to do now in order to get my phone back? I've found solutions for other phones regarding this situation, but I haven't come across one for Moto X Pure. This is what happens when you work on your phone all day long and some more into late night lol...
acejavelin said:
TWRP shouldn't be a part of this, nor should it matter whats on your internal storage, this is all done with fastboot.
Factory reset in stock recovery, reboot to bootloader, then flash the complete image with fastboot.
Click to expand...
Click to collapse
Thank you for your ongoing support. I just want to make sure I'm doing this right. I found this firmware: http://forum.xda-developers.com/showpost.php?p=69103575&postcount=243
Could you please tell me if you think that's what I should flash?
Also, if you don't mind, will you please share exact fastboot commands/process? I just don't want to make any more mistakes and make things worse. I apologize for being needy.
goldentequila said:
Thank you for your ongoing support. I just want to make sure I'm doing this right. I found this firmware: http://forum.xda-developers.com/showpost.php?p=69103575&postcount=243
Could you please tell me if you think that's what I should flash?
Also, if you don't mind, will you please share exact fastboot commands/process? I just don't want to make any more mistakes and make things worse. I apologize for being needy.
Click to expand...
Click to collapse
Yes, look in my signature and use the non-relock option: http://forum.xda-developers.com/mot...de-return-to-stock-relock-bootloader-t3489110
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
acejavelin said:
Yes, look in my signature and use the non-relock option: http://forum.xda-developers.com/mot...de-return-to-stock-relock-bootloader-t3489110
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
Thank you very much for that. You mentioned that I would need to factory reset in stock recovery first. Do I just fastboot flash a stock recovery from the firmware zip file from 18-4, boot into its recovery, reset, and then follow the instruction above?
goldentequila said:
Thank you very much for that. You mentioned that I would need to factory reset in stock recovery first. Do I just fastboot flash a stock recovery from the firmware zip file from 18-4, boot into its recovery, reset, and then follow the instruction above?
Click to expand...
Click to collapse
Boot, flash, whatever... It is best to do a factory reset in the default recovery first, but it isn't essential.
acejavelin said:
Boot, flash, whatever... It is best to do a factory reset in the default recovery first, but it isn't essential.
Click to expand...
Click to collapse
Oh ok. Thanks again. I'll report back if I succeed (or not) later today. I appreciate your help.
acejavelin said:
Boot, flash, whatever... It is best to do a factory reset in the default recovery first, but it isn't essential.
Click to expand...
Click to collapse
Thank you so much for your help. It worked perfectly. Now I have my phone back :victory:
goldentequila said:
Thank you so much for your help. It worked perfectly. Now I have my phone back :victory:
Click to expand...
Click to collapse
Glad I could help. You're welcome.
Lol it was sparsechunk i just got confused with it and said spunk??
I have a second Moto G4 and I was curious if anyone got a fix for these issues? it happened a while back when I was trying to go back to factory image. there was a lot of errors. I cant seem ti find the screenshots of the errors that I got at the time. This was around January or so.There is no Mac Address in settings and theres no ip no way to turn data on and when I try wifi. it automatically shuts off. Doesn't detect my Sim Card or Service. says Emergency calls only
I have the same problem, I have got the sim working but no wifi or bluetooth yet.
When I load adb shell and grep the wireless module it says "WCNSS DRIVER NOT FOUND" even though it is there.
I found fix. Delete the old os completely and have the right stock os ready to adb flash. Id say google ATHENE_MPJ24.139-49_cid50_subsidy-DEFAULT_CFC.xml .. then put it in your minimal adb and fastboot file. go to bootloader and then back to computer to do the shift right click in the file on pc and get terminal up and copy and paste this
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Fastboot flash logo logo.bin
The fastboot restart the device and you should be back with the wifi and data. I bought a new phone in feb or march because of this issue and couldn't find a fix till I googled constantly.
I had to delete the os completely and then flash the factory boot image with
AArnold2 said:
I have the same problem, I have got the sim working but no wifi or bluetooth yet.
When I load adb shell and grep the wireless module it says "WCNSS DRIVER NOT FOUND" even though it is there.
Click to expand...
Click to collapse
NeroCZA said:
I found fix. Delete the old os completely and have the right stock os ready to adb flash. Id say google ATHENE_MPJ24.139-49_cid50_subsidy-DEFAULT_CFC.xml .. then put it in your minimal adb and fastboot file. go to bootloader and then back to computer to do the shift right click in the file on pc and get terminal up and copy and paste this
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Fastboot flash logo logo.bin
The fastboot restart the device and you should be back with the wifi and data. I bought a new phone in feb or march because of this issue and couldn't find a fix till I googled constantly.
I had to delete the os completely and then flash the factory boot image with
Click to expand...
Click to collapse
What are the proper steps to completely remove your entire OS safely? Do you mean to just overwrite the current one?
This procedure overwrites your current or completely. You will lose the contents of the internal SD card
Sent from my LG-LS980 using Tapatalk
dayne.rhoades said:
What are the proper steps to completely remove your entire OS safely? Do you mean to just overwrite the current one?
Click to expand...
Click to collapse
Save what you want and it should be safe to just completely wipe your phone cache and all no overwrite.. Then have the stock ready to flash in the file on computer and do the the above steps. Ive done it on both my moto g4's because on my main one which I'm sending off to Motorola for screen repairs, I wiped my phone without thinking about the stock os. panicked but remembered the back to stock steps and attempted them. Ive always gotten errors or wifi and data wipe from over writing with the codes. So I just flashed on the one I deleted OS off of and it worked.
tekweezle said:
This procedure overwrites your current or completely. You will lose the contents of the internal SD card
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Yeah sadly you will lose everything unless you have it all saved. I was mad about losing a lot of things but I was having screen issues and data wifi issues to try to fix. I do have data and wifi now. I just wish I saved what I could.
Would the android data recovery program recover anything? Ive been searching how to recover wiped data. Internet is full of info on how wiped data can be recovered. I just want the text messages and stuff. I had important things in some the text messages I lost
You should save to the external SD card.
Sent from my LG-LS980 using Tapatalk
Delete the old OS via twrp?
You should have made a backup with twrp. Then you could restore your os as it was.
Sent from my Moto G (4) using Tapatalk
Nope the firmware linked above caused the phone to go in to a boot loop.
AArnold2 said:
Delete the old OS via twrp?
Click to expand...
Click to collapse
Yeah that's what I did. Then I flashed the stock rom I googled. Ive been trying to update to nougat for past 2 days since I got back to proper stock rom.
you can;t flash any of the official firmwares via TWRP. You can flash a custom rom or restore a backup of your OS though.
to flash/reload an official firmware, you need ADB and fastboot running from a computer.
Exactly. Don't try with TWRP.
tekweezle said:
you can;t flash any of the official firmwares via TWRP. You can flash a custom rom or restore a backup of your OS though.
to flash/reload an official firmware, you need ADB and fastboot running from a computer.
Click to expand...
Click to collapse
I do not know whether my EFS and Persist are intact but I have backed them up. I had installed Pixel Experience 9.0 and then restored my TWRP backup to go to Stock Oreo, Build Number: OPSS28.85-13-5. This is my current Build, unlocked, rooted and has TWRP.
Can I follow this (https://forum.xda-developers.com/g5-plus/development/stock-firmware-npn25-137-67-5-fastboot-t3694738) guide to go back to Stock Nougat and then upgrade to the latest official update from moto?
I am asking to confirm as the Stock ROM given in the guide is Nougat ROM and I am on Oreo as mentioned above. I won't have any problems right? I do not want to lose VoLTE and my IMEI.
Any help will be appreciated.
Installed Oreo ROM via fastboot on my Moto G5 Plus [RETIN/Indian/ XT1686]
I am sharing my experience here so that it might help someone looking to flash stock ROM via fastboot. This is not meant to be a tutorial, but I will list out the steps I followed. I am not responsible if you mess up or hard/soft brick your device when following the steps I mentioned below. Always make a backup of your data/photos/videos/music and whatever else. Also make a backup with TWRP to be safe.
So instead of following the guide linked in the above post, I followed this one and successfully unrooted and returned to stock: https://forum.xda-developers.com/g5-plus/how-to/moto-g5-plus-fastboot-flash-stock-oreo-t3848433
But I did not use the ROM linked by the OP in that thread. Instead I downloaded this one : https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
This RETIN ROM works for me because I have the Indian XT1686. I don't know if it matters but I had the same version (13-5) before, but I am not sure whether it was RETAIL or RETIN.
Anyways guys make sure you download the right ROM for your device if you are going to install via fastboot. You can download the right ROM for your device from here: https://mirrors.lolinet.com/firmware/moto/potter/official/
There are different folders for ROMs of different regions in the above link. So carefully download the one your device is compatible with.
Also, I installed fastboot drivers from here: https://forum.xda-developers.com/showthread.php?t=2588979
Follow the instructions and also follow the video tutorials in the post to install fastboot drivers if your phone isn't detected in fastboot.
Then once I had downloaded the ROM and installed ADB, I extracted the ROM zip into a folder. Copy pasted ADB Files into the same folder (download ADB Files that worked for me _ attached to this post below).
FInally I put my phone in fastboot (turn off phone, then press volume down and power simultaneously till fastboot shows up). Connected the phone to my PC. Then opened CMD in the folder where I had extracted the ROM and copy pasted the ADB Files. To open cmd in a folder, just type cmd in the address bar of the folder and press enter.
And then I copy pasted the following code into the cmd window:
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
The above commands will run when pasted in cmd and your phone will be flashed with the ROM. It took a couple minutes to install and then I had to press enter while still in cmd to reboot the phone. Then the phone rebooted. Took a couple minutes more to boot, so stay patient. Then once the phone booted, I disconnected it from my PC and set the phone up as usual. DO NOT disconnect the phone when the fastboot commands are running and the ROM is being flashed. Note that the above fastboot commands will only flash the ROM. It will not lock the bootloader.
If you want to lock the bootloader then follow the instructions here: https://forum.xda-developers.com/g5-plus/how-to/moto-g5-plus-fastboot-flash-stock-oreo-t3848433
Note that I haven't locked my bootloader. So you will have to try and see for yourself whether it locks your bootloader.
Also once I booted up I got update notification and was able to update to the Feb 2019 OTA security update. So I can for sure say that updates work. VoLTE, calling, camera, almost everything I checked works.
Cheers. :victory:
Maybe it isn't a right place to ask for it, however, I saw that erfanoabdi made an Ubuntu Touch GSI and also a halium-boot port for river. Maybe it's a silly question, but it is possible to just simply install this GSI (or maybe semi-GSI, because it requires halium port) on river and boot it? There's a simple guide for installing this GSI or any device which has a halium port, here it is:
0) Install treble compatible android 9 rom
1) FORMAT data in twrp
2) Flash halium-boot.img of your device
3) Flash GSI zip (I think I can't give a link here, it is allowed?)
So can it theoretically work? I tried it, but unfortunately I saw just blank screen after booting.
don't format data before LOS16
HueyT said:
don't format data before LOS16
Click to expand...
Click to collapse
So, I should:
1. Flash LOS 16 without formatting data (I'm on Android 10)
2. Format data
3. Flash halium boot
4. Flash UBports GSI
I'll try that but I don't think it's a data problem, because I've already tried it and the zip was successfully installed - files it should copy were copied on data partition, I've checked this. But I'll try once more, without formatting data. Should I boot lineage after flashing?
Yeah, so I followed this and it worked. Thanks!
If anyone had the same problem, I'll write down all what I did:
0. Temporarily booted TWRP and installed it via zip (twrp-3.3.1-14-river)
1. Installed LOS 16 (lineage-16.0-20200127-UNOFFICIAL-river) without formatting data.
2. Booted LOS but it rebooted as the data wasn't formatted and i kept it booting until it booted into LOS Recovery to format data, so I just rebooted phone without formatting data and installed TWRP as in step 0.
3. Flashed halium-boot as boot image in TWRP and installed UBports installed v5 zip, also in TWRP of course.
4. Rebooted phone.
5. Now Ubuntu Touch booted succesfully. Unfortunately, it reboots after about 1 minute. So it's not stable enough at this time. Or maybe I'm doing something wrong, I'll try also another vendor image.
EDIT: I've just tried another vendor.img from newer LOS16 build. Worked fine, but sim doesn't work
Nick_Nicker said:
Maybe it isn't a right place to ask for it, however, I saw that erfanoabdi made an Ubuntu Touch GSI and also a halium-boot port for river. Maybe it's a silly question, but it is possible to just simply install this GSI (or maybe semi-GSI, because it requires halium port) on river and boot it? There's a simple guide for installing this GSI or any device which has a halium port, here it is:
0) Install treble compatible android 9 rom
1) FORMAT data in twrp
2) Flash halium-boot.img of your device
3) Flash GSI zip (I think I can't give a link here, it is allowed?)
So can it theoretically work? I tried it, but unfortunately I saw just blank screen after booting.
Click to expand...
Click to collapse
Did it occur to you to maybe link to what you're talking about? Where is this halium-boot port for River you're talking about? I see nothing in the main GSI thread about anything but the G7 Power. No results on google for halium-boot river or halium river point to anything but this thread, so I have no idea what you could possibly mean.
Check on https://build.lolinet.com/file/halium/
Here you can find GSI and halium-boot images from Erfan. He also posted it on XDA, here you can find all information about it: https://forum.xda-developers.com/pr...development/gsi-ubuntu-touch-ubports-t4110581
So, halium-boot.img is found on build.lolinet.com
But you can also build Halium 9 image if your device's kernel source is available, here's some info https://github.com/ubports/porting-notes/wiki/Generic-system-image-(GSI)#how-to-install-gsi
Also it's very important to have Android 9 ROM installed before. However, stock Android 9 didn't work for me, I prefer LineageOS. So, just install Lineage and then the GSI and halium boot image. For Moto G7 also flash 'river-firmwares.zip' found on lolinet. It'll fix that weird vibration noise bug. For now, there are some visual glitches visible (also only on river), but it'll be fixed. Anbox is working if you have /data partition formatted in ext4 (not f2fs), so if you follow instructions, you can also run some Android apps. Unfortunately, for me internet connection inside Anbox doesn't work.
Thanks sorry I was just starting to feel a bit insane, that stuff is not indexed on google at all by the looks of it. Thank you.
So here is the process that worked for me.
I started with the stock rom.
1. Followed the full Lineage OS install instructions, including the partitions zip etc.
2. Installed Lineage OS on Slot B per the above instructions
3. Wiped data
4. Flash halium-boot.img
5. Flash GSI zip
Everything works perfectly including cellular functionality.
Followed the steps above. Is it possible to revert?
I followed the steps above, but I am have serious issues with the screen jitter. I have been looking all over the place to see if there is a way to revert back to android so that I can use my phone without the screen jitter. Does any one have any instructions on how to do this? I did turn on ADB mode on Ubuntu Touch but my computer does not see an adb device. Thank for any help.
Took me a long time to figure out too.
Main thing is, if you hold down Power and Volume Down, eventually it will reboot to the boot menu. Don't select anything, just plug it in, and you'll have fastboot.
To go back to stock:
1. Hold down Power and Volume till the boot menu shows up.
2. Plug the phone into your PC
3. Get the newest firmware for your phone model. I bought mine at Best Buy, so it was RETUS aka retail US. https://mirrors.lolinet.com/firmware/moto/river/official/
4. Extract the archive, and enter that folder in your terminal
5. Run the following commands from that folder. I saved these commands in a shell script and ran it but I think you can just paste it
THIS WILL WIPE ANY DATA ON YOUR PHONE AND PUT IT BACK TO FULL FACTORY FIRMWARE WITH LOCKED BOOT LOADER. At least when I ran it, it got my phone 100% no more complaints when it boots about untrusted code. After this you should have a fresh phone you can unlock and try flashing again. THis also restored my OTA ability and I was able to get the Android 10 update without any issues.
fastboot oem lock begin
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.2
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot oem lock
fastboot oem lock
fastboot oem lock
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash oem oem.img
fastboot oem lock
Click to expand...
Click to collapse