My P8 Lite is only a few weeks old with no information on it, it’s locked with a password that I cannot remember and when I try to hard reset by pressing the Volume up + power button it goes into eRecovery mode and doesn’t show the Wipe/factory reset option. Instead, it shows “Download latest version and recovery” , “shutdown” and “reboot”
What do I do?
is the bootloader unlocked? if yes, try flashing new system.img, that should overwrite the default system and unlock it
Related
I flashed asian latest firmware, when i tried to revert back to indian version , the gpt flash failed and from that my phone doest not boot correctly
1. reboot - goes to bootloader and again i have press start button in bootloader menu to boot.
2. power off - goes to bootloader and again i have press power off button in boot loader menu.
is it software or hardware issue.
It's clearly software issue. Did you make a nandroid backup before upgrading to asian firmware? If so... Did you apply a factory reset before and after restoring it?
Hello,
I just bought this phone and I would like to know if it is possible to fully unroot the phone after unlocking bootloader and rooting. Cconcretely if there is a way how to lock bootloader the way how stock is (not relocked message etc.) so it could be send to assistance without problems.
Thank you.
1st, extract update app with huawei update extractor. go to custom recovery, flash stock boot IMG and stock recovery IMG. Power off, use three button dload method, reboot, when booting press vol up for three second, now you are in e-recovery. Press shutdown. Press and hold power and vol up for stock recovery. Do factory reset. If need do the factory reset 2/3 times. Now you are with locked bootloader.
But, before send to service center. Recheck OEM unlocked in developer section.
You can use this method at any time, any situation.
You can do any experiment with your device now.
Sent from my NEM-L21 using Tapatalk
I tried to update my wife's P9 lite to Nougat manually and initially succeeded in some way. The version I installed via the dload install method turned out to be some sort of Bluetooth disabled demo firmware (I can't remember the name of it).
I then tried to downgrade back to MM 6.0/EMUI 4.1 and now have a bricked phone. I can't actually turn it off!
Hard reset options do nothing.
Here is the current situation:
The phone is always on - the Huawei logo is displayed with 'powered by Google' at the foot of the screen.
Holding down the power button returns the phone to the same screen after a vibration and a brief moment of blackness.
Holding all three buttons results in a double vibration then back to the same screen.
Power and down vol leads to black screen, vibrate, back to logo screen.
Power and vol up is the same as vol down result.
I'm out of ideas. Nothing online mirrors these faults. I'm ashamed to admit defeat but it is as dead as I've seen any handset. I can't believe it won't even power down. I'm in the doghouse here. Wife is not happy!
Download any update eg b161, download trwp and connect your phone to PC then press power + vol down. U should land to fastboot then open adb/fastboot and type fastboot oem unlock "unlock code" then enter if u get unlocked then flash trwp by fastboot flash recovery trwp.img after that go to trwp and flash the update.zip u downloaded. Then reboot
elliotn said:
Download any update eg b161, download trwp and connect your phone to PC then press power + vol down. U should land to fastboot then open adb/fastboot and type fastboot oem unlock "unlock code" then enter if u get unlocked then flash trwp by fastboot flash recovery trwp.img after that go to trwp and flash the update.zip u downloaded. Then reboot
Click to expand...
Click to collapse
Thank you but it goes straight back to the logo screen when I try this.
Hi,
i have a huawei P8 (GRA-L09) blocked on recovery.
It allows me to perform the factory reset and Wipe.
If I reset, it returns to recovery.
If I turn it on with the Vol- and Power combinations, install the EMUI and fail (install software failed).
If I try to connect it with USB and repeat the operation, it locks to 5%.
Help me.
PS. I do not know EMUI was there before, I have no information.
Hi guys,
Yesterday, I unlocked my Huawei P9 Lite with the given code from EMUI, then I installed TWRP (twrp-3.1.1-0-venus.img) and installed SuperSU. All went okay, i managed to delete useless system app, but I realized i did not pass Safetynet Check anymore (and since i'm a PoGo fan..), so I uninstalled SuperSU and tried with Magisk, same issue. I uninstalled both, and couldn't get back the clean safetynet check.
There, I tried to install a official ROM for VNS-L31 xxxx361, but I did it wrong and the whole thing crashed. Now i'm left with no OS, phone is bootlooping for ever. The only things I can access if TWRP and Fastboot mode. I tried to flash img from a huawei release, but i get this error that scare everyone i asked about : remote : sparse flash write failure.
I've no idea how to not trash my phone and go grab another one if I ever want to make a phone call again!
Please help!!
Kindly,
Antonin
I had similar problem but I had no recovery just eRecovery and fastboot (which didnt let me flash anything).
Download FULL rom from:
hwmt.ru/oth/HWFF/info/view.php?find_model=VNS
(sorry cant post links)
Make sure u choose right model and location.
Extract the update.app and put it on sdcard in folder named dload, insert that sdcard into the phone.
Boot to erecovery and shut down the phone from there, then turn on the phone with both volume buttons pressed and wait till the rom will be installed.
If you didnt success to boot with vol + and vol -, try to press power wait for vibration and quickly press both volume buttons and hold.