Database Users

Zuk Z1 Soft Brick

Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.

triby said:
Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.
Click to expand...
Click to collapse
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?

Life Engineer said:
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?
Click to expand...
Click to collapse
thank you life engineer! No luck . I'll try to send it back. Thanks again for you're help. Much appreciated!

hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.

rusty96379 said:
hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.
Click to expand...
Click to collapse
How does the bootloop look like?

crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
The bootloop is just showing the ''ZUK logo'' in the middle of screen and "'powered by Android logo'' below,and the phone vibrates everytime it flashes these logos. I tried QFIL but it can only detects the unit on the first boot or first flash that is 2 secs. only from the time i press the power button, and then it disconnects and not detect the unit again. Does anyone know where can i find the scatter file , MTK ROM for zuk z1, i would like to try the SP flasher tool. Or if anyone have any idea how to solve this issue on lenovo zuk z1,pls. help.tnx

Can y get to fastboot ?

im facing the same problem after i had the stupid idea to lock the bootloader again, before that i flashed the phone successfully with the cm mod recovery and cm 13.
Has anyone found a solution to this ? or do i have to send it back ?
What i did exactly :
I locked the bootloader again and just to test it i tried flashing the recovery again , ofcourse it didn't work which was what i wanted.
Afterwards i rebootet the bootloader with sudo fastboot -i 0x2b4c reboot
now im stuck in a bootloop that i cant even stop , in other words i cant turn my phone off nor can i access the recovery or fastboot
Im feeling so stupid that i locked it again .... i will try to get into recovery after my phone ran out of battery but so far it looks quite bad...does anyone know if i will get a replacement even though it was my fault ? ( i don't need to say that it was my fault ..and the bootloader is now locked again )
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/

CPP11 said:
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/
Click to expand...
Click to collapse
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!

Need some help
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now

Any solution?!
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help
---------- Post added at 01:20 AM ---------- Previous post was at 01:08 AM ----------
Amen Ghazy said:
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now
Click to expand...
Click to collapse
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help

Please help , same problem
I am facing same issue too from 2 days. I didnt even try to flash custom roms or play with boot loader or recovery or anything. All of a sudden my phone entered boot loop. After two three bootloops phone is entering "12 apps optimized of 230 apps" mode, completing optimizing all apps and then failing to start apps, entering boot loop again.
Effort made so far to fix -
1) Went to recovery and cleared cache - didnt work
2) Went to recovery and did factory reset - factory reset did happen but boot loop didnt stop, I realized that factory reset happened because now its saying optimizing 120 apps instead of my 230 apps during the bootloop.
3) Went to recovery, Entered fast boot mode but not able to connect to PC. Fastboot devices is not showing anything. I made sure proper driver is installed after researching on XDA.
4) Went to recovery, Tried "Install update". Didnt install anything but browsed through folder structure and realized my data is intact
It will be great if someone can help me atleast recover my data before I handover phone to service center for fixing boot loop issue.

Same problem
crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
i have same problwm what to do plz help mme

Abhishekjain31291 said:
i have same problwm what to do plz help mme
Click to expand...
Click to collapse
Explain in detail

errecez1 said:
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!
Click to expand...
Click to collapse
The link is not accessible now. Can you let me know what you have done. My phone is in a boot loop now and showing only Logo and 'powered by Android' message. It keeps turning on and off again and again.

Guys when u are in fast boot mode .. pls install Twrp ... After insatlling that press power button abd vibration comes hold volum doen+volume up button at the same time ..
Then u will be getting recovery Twrp mode .. then connect it to pc and u will see internal srorage in pc...now u have to copy any rom to the phone and install it via Twrp ... Thats all

Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press POWER KEY only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
EDITED:
While connecting to pc and by pressing Volume key you also need to press Power key for 1 sec or 2 sec until it gets detected. Thanks addicted777 (for tip)

rajendra0072 said:
Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
Click to expand...
Click to collapse
I'm happy that my videos were helpful. Enjoy.

keeps vibrating showing logo again and again, neither won't turn off neither turn on till for so many hour until the charge is empty....

how to stop boot loop ??????
can you provide videos how to stop boot loop ??????

Yotaphone 2 - another bricked phone after update

Hi guys,
My Yotaphone 2 is currently stuck in a boot loop (shows android logo, then black screen, repeat) after a software update. I can get to the 'Downloading...' screen via power + vol. key and so have tried adb/fastboot as suggested in other similar threads. ADB can't see the device, which I guess is probably normal since it isn't booted up, but fastboot seemingly can. I've tried flashing the TWRP recovery which seems to go through fine on the PC end but doesn't seem to do anything at all on the phone itself. Calling a fastboot reboot gets the phone back to the boot loop and power + vol. goes back to the 'Downloading...' screen.
I've also tried using the Yotaphone flashing tool to flash a full android image - this also looked like everything was operating OK on the PC end but didn't seem to change anything on the phone once the process was complete.
Is there anything I'm missing or anything else I can try? Any help/ideas much appreciated!
Cheers.

pjrj said:
Hi guys,
My Yotaphone 2 is currently stuck in a boot loop (shows android logo, then black screen, repeat) after a software update. I can get to the 'Downloading...' screen via power + vol. key and so have tried adb/fastboot as suggested in other similar threads. ADB can't see the device, which I guess is probably normal since it isn't booted up, but fastboot seemingly can. I've tried flashing the TWRP recovery which seems to go through fine on the PC end but doesn't seem to do anything at all on the phone itself. Calling a fastboot reboot gets the phone back to the boot loop and power + vol. goes back to the 'Downloading...' screen.
I've also tried using the Yotaphone flashing tool to flash a full android image - this also looked like everything was operating OK on the PC end but didn't seem to change anything on the phone once the process was complete.
Is there anything I'm missing or anything else I can try? Any help/ideas much appreciated!
Cheers.
Click to expand...
Click to collapse
Do you have any idea what caused the bootloop? (maybe installing xposed or something?)
When you keep vol-up pressed at (not after) the moment the phone vibrates during power on, you will end up in TWRP recovery. There you can at least wipe->factory reset. Don't do this if you have stuff on your phone you'd like to keep though. (you can try to rescue/backup those by trying "adb pull <path_to_file>" when the phone is booted into TWRP)

SteadyQuad said:
Do you have any idea what caused the bootloop? (maybe installing xposed or something?)
When you keep vol-up pressed at (not after) the moment the phone vibrates during power on, you will end up in TWRP recovery. There you can at least wipe->factory reset. Don't do this if you have stuff on your phone you'd like to keep though. (you can try to rescue/backup those by trying "adb pull <path_to_file>" when the phone is booted into TWRP)
Click to expand...
Click to collapse
It was caused by doing an OS update (wasn't rooted or modified), I've only since tried installing the TWRP recovery and using fastboot to flash an official image to fix the looping. Flashing TWRP appears to work according to flashboot but holding the volume up key at the vibrate on power on doesn't do anything sadly.

pjrj said:
It was caused by doing an OS update (wasn't rooted or modified), I've only since tried installing the TWRP recovery and using fastboot to flash an official image to fix the looping. Flashing TWRP appears to work according to flashboot but holding the volume up key at the vibrate on power on doesn't do anything sadly.
Click to expand...
Click to collapse
Maybe I should rephrase: the vol-up should already be pressed once the vibrate starts. For a timing-insensitive, fool-proof (no pun intended) way you can enable bootloader (like you did before: you get the Downloading... screen). Then keep vol-up and power pressed together, after 15 seconds the device reboots hard, keep both keys pressed until you see TWRP 'curtain' screen, then release.
Did you try to use the YotaFlasher Windows application to reinstall an official ROM and restore factory defaults? You can get it from here, also download a ROM for your region here.

TWRP install gone badly wrong i think

I have a problem after installing TWRP on my P9 Lite i have a screen saying:
Your device has been unlocked and can't be trusted
To Learn more, visit: long www adress
Your device is booting now...
Cant put a picture because i don't know how. But this is all it says, and then nothing else happens. Just stays on that screen. Can't connect to my pc or reboot in Recovery mode it always ends here.
Hopefully one of you guys can help. In a bit of panic.
Can't shut it down, everytime i try to turn it off, it reboots into this screen.

Can tell us some more information? Like what ROM are you on now, what TWRP you used etc..

Potato997 said:
Can tell us some more information? Like what ROM are you on now, what TWRP you used etc..
Click to expand...
Click to collapse
I Used TWRP 3.1.1.0 and havn't gooten to custom rom, i am on Android Nougat with EMUI 5.0.
Cant start it other then ending on this screen. I managed to get it booting again, but now my Bluetooth didn't work. So i tryed again and now i am stuck again.
It's a B380 Model

Potato997 said:
Can tell us some more information? Like what ROM are you on now, what TWRP you used etc..
Click to expand...
Click to collapse
Just tryed to make the dload folder on the root of my SDcard but still no success. I havn't been able to start boot screen other than this locked screen.
I have tryed to start with volume up + power both volume up and down + power and volume down + power. Nothing changes, just get this screen everytime.
Cant do anything, not even shut the phone down, it only reboots. I have seen other simular problems, but they have been able to get to the screen with 3 options. I havn't been able to come to that part.

Plug USB cable to your phone but not on your computer, restart the phone and as soon as it restart press volume + (or volume - I don't remember which is fastboot) and plug the USB cable to the computer. So you can check if the bootloader is unlocked

Potato997 said:
Plug USB cable to your phone but not on your computer, restart the phone and as soon as it restart press volume + (or volume - I don't remember which is fastboot) and plug the USB cable to the computer. So you can check if the bootloader is unlocked
Click to expand...
Click to collapse
I can't get to fastboot, dosn't matter what i do. I have no clue what have happened.

stubbeDk81 said:
I can't get to fastboot, dosn't matter what i do. I have no clue what have happened.
Click to expand...
Click to collapse
After i ran out of power and the phone went out. I have been able to boot again. Anybody who knows a bootloader i can install that works on my phone for sure. My bootloader is ****ed up.
It is unlocked now, so i have to be sure it works.

Note 8 with boot loop and no access to bootloader

Hi, big problem with my note.
Unlocked with custom rom today starts going in bootloop with warning screen about this is not the original rom. So I shut down the phone and after a bit I connect it to the power ac and the phone starts to boot loop with logo honor heavenly background. I cannot enter in bootloader pressing the right buttons.
Is it bricked? There's anything I can do? Please help me and sorry for my english.
Thanks.

Hi @rolling_bonzy
you can try to enter erecovery and let it install the latest version of stockrom.
to do this, connect your device to your computer with usb, then hold powerbutton as long as it needs to restart, then keep holding "vol+" until on the screen "your device has been blablabla not trusted" and the message shows up "your device is booting now..." - wait a while and you land in the Huawei eRecovery, where you can "Download latest version and recovery" ... do that
perhaps it is needed a second time after that for doing a factory reset in the same menu
let us know if it worked, cheers =)

pixel81k said:
Hi @rolling_bonzy
you can try to enter erecovery and let it install the latest version of stockrom.
to do this, connect your device to your computer with usb, then hold powerbutton as long as it needs to restart, then keep holding "vol+" until on the screen "your device has been blablabla not trusted" and the message shows up "your device is booting now..." - wait a while and you land in the Huawei eRecovery, where you can "Download latest version and recovery" ... do that
perhaps it is needed a second time after that for doing a factory reset in the same menu
let us know if it worked, cheers =)
Click to expand...
Click to collapse
Many thanks for your reply. Unfortunately no succes. But I notice that if I press "vol -" it stops to boot loop and the screen is black. If I release the button restart flashing.

and does it flash or only wants to?
perhaps you have a chance if you create a 'dload'-folder on your sdcard and therein copy this file (for example): http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3130/g1699/v168765/f1/full/update.zip (i have it from the topmost entry from http://pro-teammt.ru/firmware-database/?firmware_model=EDI-AL10&firmware_page=0 -> click on 'filelist')
After that, connect your device with usb on the computer, restart and keep holding vol+ and vol-
keep us updated

$25 Paypal TO *YOU* for fixing VKY-L29 boot issues / possibly brick

Hey guys,
A friend of mine handed me a phone I used a few years ago - a Huawei P10+. The problem is, it won't boot. A friend offered a small bounty - so I thought I'd extend that small bounty to people here for immediate assistance. If you take Paypal, there $25 USD up for grabs if your links/instructions and assistance lead to unbricking - correct booting of the phone....
WHAT WE KNOW:
- VKY-L29 dual sim phone
- Previously been successfully rooted and was functioning fine
- Previous User may have tried wiping EVERYTHING (unsuccessfully, obviously) for re-installation of stock ROM
THE PROBLEM:
The phone displays the white/orange text screen, stating "Your device has been unlocked and can't be trusted. To learn more visit: http://zh.ui.vmall.com/emotiondownload.php?mod=restore
(1) Press power to continue .... nothing happens when pressed
(2) Press volume up for 3 secs to enter ERecovery to restore your device ... this works, but CANNOT download, or fails to download package over WIFI (only other options are to shutdown/reboot)
(3) Your device will continue to boot 5 seconds later if no operation ... nothing happens, it just hangs on this screen - even when prompt shows "Your device is rebooting now"
It doesn't matter if this stays rooted or not, we just need to successfully reinstall the STOCK ROM and booting/functioning normally.
Any assistance is appreciated.
Regards
RoOSTA

roosta said:
Hey guys,
A friend of mine handed me a phone I used a few years ago - a Huawei P10+. The problem is, it won't boot. A friend offered a small bounty - so I thought I'd extend that small bounty to people here for immediate assistance. If you take Paypal, there $25 USD up for grabs if your links/instructions and assistance lead to unbricking - correct booting of the phone....
WHAT WE KNOW:
- VKY-L29 dual sim phone
- Previously been successfully rooted and was functioning fine
- Previous User may have tried wiping EVERYTHING (unsuccessfully, obviously) for re-installation of stock ROM
THE PROBLEM:
The phone displays the white/orange text screen, stating "Your device has been unlocked and can't be trusted. To learn more visit: http://zh.ui.vmall.com/emotiondownload.php?mod=restore
(1) Press power to continue .... nothing happens when pressed
(2) Press volume up for 3 secs to enter ERecovery to restore your device ... this works, but CANNOT download, or fails to download package over WIFI (only other options are to shutdown/reboot)
(3) Your device will continue to boot 5 seconds later if no operation ... nothing happens, it just hangs on this screen - even when prompt shows "Your device is rebooting now"
It doesn't matter if this stays rooted or not, we just need to successfully reinstall the STOCK ROM and booting/functioning normally.
Any assistance is appreciated.
Regards
RoOSTA
Click to expand...
Click to collapse
Boot in eRecovery by holding the Volume Up button, after booting in eRecovery just download the latest package via connecting to a Wi-Fi network and it should boot up just fine.

LesterDMolester said:
Boot in eRecovery by holding the Volume Up button, after booting in eRecovery just download the latest package via connecting to a Wi-Fi network and it should boot up just fine.
Click to expand...
Click to collapse
Hey,
Perhaps read point 2 in my message first..?
RoOSTA

roosta said:
Hey,
Perhaps read point 2 in my message first..?
RoOSTA
Click to expand...
Click to collapse
Try downloading an older firmware extract the contents of the .app file using huawei firmware extractor and flash system.img recovery_ramdisk.img oeminfo.img product.img and vendor.img using fastboot and if the phone boots up just update it to a newer firmware, that's how i did it to my P10 Plus, it didn't wanna download via eRecovery too, sorry for the misunderstanding i forgot that it doesn't wanna download for you, i don't have the device with me now because i broke my display (again) so it's getting fixed but it won't be done untill saturday, i'll upload the firmware i used so that you can try too.

if the bootloader is unlocked flash twrp using the command: fastboot flash recovery_ramdisk "path to TWRP.img"
after flashing type: fastboot reboot and immediately start pressing the Volume Up and power button untill the HUAWEI logo shows up, after booting to TWRP flash oeminfo.img using the install option in TWRP, after that reboot and try downloading the firmware using eRecovery again, hopefully this time it will let you download it.

LesterDMolester said:
if the bootloader is unlocked flash twrp using the command: fastboot flash recovery_ramdisk "path to TWRP.img"
after flashing type: fastboot reboot and immediately start pressing the Volume Up and power button untill the HUAWEI logo shows up, after booting to TWRP flash oeminfo.img using the install option in TWRP, after that reboot and try downloading the firmware using eRecovery again, hopefully this time it will let you download it.
Click to expand...
Click to collapse
Thanks Lester I will try this when Ian home and let you know how I go...

roosta said:
Thanks Lester I will try this when Ian home and let you know how I go...
Click to expand...
Click to collapse
Dude pls wait don't try this i found another way, i bricked my phone accidentally today and i found a way, gonna take me some time to explain but i'll try my best.

So first of all download this firmware here extract it on your pc and boot to bootloader and flash TWRP_kirin.img to recovery_ramdisk, after that reboot the phone and boot in recovery via holding the volume up and power button, when in TWRP copy the dload folder from the firmware you extracted on your pc to your phone after that copy the RECOVERY8_NoCheck.img to your phone and flash it as recovery ramdisk via the install option in TWRP, power off your phone and press and hold the volume buttons and the power button and wait for it to boot and let it install the update, i really hope this helps you, it helped me after struggling with it all day long.

Hi Lester, it's been an eternity since I was online here as I put this on the back-burner with more pressing work and family priorities. Thank you very much for providing the files. I noticed the ROM firmware is EU, when i am outside of EU....but shouldn't be too big of a problem.... I am getting around to doing all of this now, I have downloaded the files. When are you typically online to chat about this?
RoOSTA

It cannot boot into TWRP, only the eRecovery. No option to flash anything on SD card, other than connecting to WIFI...

Hii roosta,
I might have some problem with you, let me facing your thread , I 'like to learn too how to make my P1o plus back to normal again, it's being long time for me to bring this up...

LesterDMolester said:
So first of all download this firmware here extract it on your pc and boot to bootloader and flash TWRP_kirin.img to recovery_ramdisk, after that reboot the phone and boot in recovery via holding the volume up and power button, when in TWRP copy the dload folder from the firmware you extracted on your pc to your phone after that copy the RECOVERY8_NoCheck.img to your phone and flash it as recovery ramdisk via the install option in TWRP, power off your phone and press and hold the volume buttons and the power button and wait for it to boot and let it install the update, i really hope this helps you, it helped me after struggling with it all day long.
Click to expand...
Click to collapse
I had try to download from ( https://androidhost.ru/29Qt ) ....but its need much time event with IDM ( 20hrs ) )