So im trying to install twrp recovery but when i try to flash it thru odin, i get a Custom Binary (RECOVERY) blocked by FRP lock. I cant factory reset because it also disabled by FRP. I cant verify the tablet because i dont know the account information as the tablet was bought through craigslist. I have tried flashing a stock firmware version and that installed fine, but i still couldnt get past the verify screen. So thats when i decided to try and flash twrp but came into the binary error. I have been trying for the past two days to find a way around the verify identity and the frp lock. I cant enable oem unlock. I have tried rootjunky method but OTG flash wont pull up the file manager when plugged into the tablet. I cant use adb because i cant enable the developer settings because you guessed it i cant get past verify identity screen. Any help would be greatly appreciated.
Sounds like you need to find the Combination Firmware.
softasspoptart said:
So im trying to install twrp recovery but when i try to flash it thru odin, i get a Custom Binary (RECOVERY) blocked by FRP lock. I cant factory reset because it also disabled by FRP. I cant verify the tablet because i dont know the account information as the tablet was bought through craigslist. I have tried flashing a stock firmware version and that installed fine, but i still couldnt get past the verify screen. So thats when i decided to try and flash twrp but came into the binary error. I have been trying for the past two days to find a way around the verify identity and the frp lock. I cant enable oem unlock. I have tried rootjunky method but OTG flash wont pull up the file manager when plugged into the tablet. I cant use adb because i cant enable the developer settings because you guessed it i cant get past verify identity screen. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Read the post by Beut in this thread and then watch the video.
4929york said:
Read the post by Beut in this thread and then watch the video.
Click to expand...
Click to collapse
I already tried that method but didn't work. It's on android 7.0. I tried downgrading to sm-t580.. XAR firmware 6.1 and it worked but when it boots it goes straight to a black screen asking for a password. I tried the frp call method as well but it doesnt have wifi calling.
softasspoptart said:
I already tried that method but didn't work. It's on android 7.0. I tried downgrading to sm-t580.. XAR firmware 6.1 and it worked but when it boots it goes straight to a black screen asking for a password. I tried the frp call method as well but it doesnt have wifi calling.
Click to expand...
Click to collapse
It only works with certain versions of 6. The one ending is PL4 is the one you want. The trick is in adding the fake wifi network instead of connecting to your home network. Pay close attention to the beginning of the video.
lewmur said:
It only works with certain versions of 6. The one ending is PL4 is the one you want. The trick is in adding the fake wifi network instead of connecting to your home network. Pay close attention to the beginning of the video.
Click to expand...
Click to collapse
Okay thank you. I will try that again when I get home. And this works on version 7.0? The device is currently on 7.0 but when I tried the pl4 md5 it flashes it but when I boot up the device it just goes to a black screen and asks for a password. It doesn't start at the setup wizard
softasspoptart said:
Okay thank you. I will try that again when I get home. And this works on version 7.0? The device is currently on 7.0 but when I tried the pl4 md5 it flashes it but when I boot up the device it just goes to a black screen and asks for a password. It doesn't start at the setup wizard
Click to expand...
Click to collapse
You have to use Odin to install PL4. You can't flash it via TWRP. Also, make sure you wipe everything first.
lewmur said:
You have to use Odin to install PL4. You can't flash it via TWRP.
Click to expand...
Click to collapse
I know. I can't install twrp like I said. I've been using Odin to flash everything. But when I flashed the pl4 file and tablet goes to reboot. It doesn't load the setup wizard. Doesn't show the welcome screen and pick a language. It goes straight to a black screen and asks for a password. Doesn't ask for an email or anything.
softasspoptart said:
I know. I can't install twrp like I said. I've been using Odin to flash everything. But when I flashed the pl4 file and tablet goes to reboot. It doesn't load the setup wizard. Doesn't show the welcome screen and pick a language. It goes straight to a black screen and asks for a password. Doesn't ask for an email or anything.
Click to expand...
Click to collapse
Never heard of that. Can you boot from there into recovery and wipe again?
lewmur said:
Never heard of that. Can you boot from there into recovery and wipe again?
Click to expand...
Click to collapse
Yea but when I try to factory wipe it says mdm doesn't allow factory reset and reboots and takes me back to that same black screen. I can only wipe cache partition. I will post a picture of the screen when I get home.
softasspoptart said:
Yea but when I try to factory wipe it says mdm doesn't allow factory reset and reboots and takes me back to that same black screen. I can only wipe cache partition. I will post a picture of the screen when I get home.
Click to expand...
Click to collapse
I found this site. It is apparently an "MDM lock" and not FRP.
lewmur said:
I found this site. It is apparently an "MDM lock" and not FRP.
Click to expand...
Click to collapse
Tried this as well. I did it about 20 times before giving up. I might try it again and do it about 30 to 50 times. If I was just able to get to settings I'd be straight but I can't get to the settings so that's why I'm trying to reset it as a completely new device. Do you know if I could flash the 7 inch tab A firmware onto the smt580? Or flash the smt585 firmware onto the t580 and flash the BL AP and CSC?
softasspoptart said:
Tried this as well. I did it about 20 times before giving up. I might try it again and do it about 30 to 50 times. If I was just able to get to settings I'd be straight but I can't get to the settings so that's why I'm trying to reset it as a completely new device. Do you know if I could flash the 7 inch tab A firmware onto the smt580? Or flash the smt585 firmware onto the t580 and flash the BL AP and CSC?
Click to expand...
Click to collapse
From what I've read, Airwatch MDM lock can't be removed by flashing ANYTHING. It is third party anti-theft protection that has nothing to do with what ROM is installed. I know I ran into their stuff a few years ago with a used laptop I bought and only Airwatch was able to solve the problem after contacting their customer and verifying the laptop wasn't stolen.
4929york said:
From what I've read, Airwatch MDM lock can't be removed by flashing ANYTHING. It is third party anti-theft protection that has nothing to do with what ROM is installed. I know I ran into their stuff a few years ago with a used laptop I bought and only Airwatch was able to solve the problem after contacting their customer and verifying the laptop wasn't stolen.
Click to expand...
Click to collapse
Okay thanks. I'll get in contact with airwatch.
lewmur said:
I found this site. It is apparently an "MDM lock" and not FRP.
Click to expand...
Click to collapse
I did end up finding this. Seems the device is completely locked with no way to get around. When i flashed the device i may have deleted the admin privilages so there is no way of gettting around it as of now. I might end up paying someone to fix it or get around it or i wasted 180$ on a locked device. The guy i bought it from either blocked my number or deactivated his number as i cant get in contact with him. Pretty pissed. Thanks for all the help tho
I had the black screen password happen to me when I downgraded my SM-P580 from Android 7 to 6. Try clearing the cache. If that doesn't work, try reflashing, then turn it off and reboot to recovery and clear the cache.
BBowermaster said:
I had the black screen password happen to me when I downgraded my SM-P580 from Android 7 to 6. Try clearing the cache. If that doesn't work, try reflashing, then turn it off and reboot to recovery and clear the cache.
Click to expand...
Click to collapse
Okay I'll try that. Didn't try that yet. Will keep updated
lewmur said:
I found this site. It is apparently an "MDM lock" and not FRP.
Click to expand...
Click to collapse
Do you think if i changed the CSC to a different region on the tablet, and put a unlocked bootloader on it, would it might get rid of the frp lock? Do you happen to have a smt580? If so do you think there is anyother way of getting around this? say if i flashed like your firmware on to my tablet? Im desperate to get this thing unlocked as i would be out 180$ :crying:. Thanks for all your help so far. I really appreciate it man. Thanks to everyone who has helped so far.
Or what if i downgrade it to 6.1 and then downgrade it again to a even farther back version? Do you think this might work and gett me around the black screen? If so then i would be able to bypass the google verify account. Ima go ahead and try it unless its a risk of bricking the tablet completely.
I also read somewhere that if i flash the cp part on odin that it will erase all data. Think that might be worth a shot? But what do i need to insert in the cp slott? I know BL goes to BL and AP to AP and CSC home goes in CSC. So what goes in the cp slot?
EDIT: So instead of putting csc home in the csc slot i put the other csc file in its place. I checked the re partition box. When i did this i got a new message on the tablet in the top left of tthe download mode that says FRP is enabled, ignore PIT download. Any idea what this means?
Related
Hi Guys,
I'm sure some of you may have heard about this error before.
Well, here's my sad sad story.
After trying to root my s7 edge,
Everything seems fine.
One day when i re-format my phone, and after which downloaded a few apps, there wasn't any issue at all
However when i restarted my phone, i saw the error msg : Custom Binary block by FRP Lock
And after which it can't boot up anymore.
Anyone of you guys able to help me ?
It'll be much appreciated!
Flash the stock firmware with ODIN
Envoyé de mon SM-G935F en utilisant Tapatalk
Thanks for the reply,
Sorry but I'm new. How do i do that?
pr0cupid said:
Thanks for the reply,
Sorry but I'm new. How do i do that?
Click to expand...
Click to collapse
What model? Country
Sent from my Blackberry Bold
Model : SM-G935FD
Country : Singapore
frp lock s7 edge
pr0cupid said:
Hi Guys,
I'm sure some of you may have heard about this error before.
Well, here's my sad sad story.
After trying to root my s7 edge,
Everything seems fine.
One day when i re-format my phone, and after which downloaded a few apps, there wasn't any issue at all
However when i restarted my phone, i saw the error msg : Custom Binary block by FRP Lock
And after which it can't boot up anymore.
Anyone of you guys able to help me ?
It'll be much appreciated!
Click to expand...
Click to collapse
i have same issue here, did you find any solutions ?
AFAIK when you factory reset your phone etc. if rooted you must remember to go back into Developer Options and re enable OEM Unlocking. This depends on the method you used to root, if you flashed dm-verity then you "May not" have this issue but cannot say for sure.
If it is already too late for you then I think you need to flash stock via Odin, plenty of threads out there on where to find the firmware (SamMobile) and how to do it. Even a quick google of the error gave me plenty of results...
One thing I have read is that you may have to keep trying to get your phone into download mode as the timing is much stricter with this error message.
I've the same problem with my g935x blocked on FRP when ii treid to root if any one can help .plz
https://drive.google.com/file/d/0B4sLrKlVs0CPQTBaamduLXdNYW8/view?usp=sharing
wHEN THE PHONE INICIALIZES PUT THIS FILE IN A OTG pendrivve install and do the reset by the menu of the phone.
djluisbento said:
https://drive.google.com/file/d/0B4sLrKlVs0CPQTBaamduLXdNYW8/view?usp=sharing
wHEN THE PHONE INICIALIZES PUT THIS FILE IN A OTG pendrivve install and do the reset by the menu of the phone.
Click to expand...
Click to collapse
@djluisbento This method seems to be interesting. But would you please clarify more about it. How to install the apk file on official recovery? Or it's enough to have the pendrive connected? And if yes, when this step should take place, after flashing the official ROM or when?
I'm stuck in a boot loop into recovery mode with dm-verity error, and unfortunately I have the FRP locked, so I can't install TWRP to flash the no-dm-verity.zip file to skip it.
Appreciate your suggestions.
I have the same issure. stock firmware wont install either. im just stuck on the FRP screen, cant even get into recovery
Same issue here, please help
Everything was fine with rooting and installing TWRP. after that did a restart/ attempt to goto twrp recovery, from then the s7 edge is stuck at "Custom Binary Blocked By FRP" and doesnt boot. please help!!
Have you do a Wipe then Format Data.
Then flash the no-verity-opt-encrypt zip in TWRP
Only if you want internal storage or data to work in TWRP:
Go to [Wipe] -> [Format Data] (not advanced wipe) -> type "yes".
WARNING: This will wipe your internal storage, disable encryption, and factory reset your phone!
Go to [Reboot] -> [Recovery].
If you want to be rooted with SuperSU:
Download the latest SuperSU by Chainfire.
Without exiting TWRP, transfer the SuperSU zip to your device over MTP* and flash it using [Install] in TWRP.
If you only want a bootable system partition or writable data in TWRP:
Download the latest dm-verity and force encryption disabler zip.
Without exiting TWRP, transfer the no-verity-opt-encrypt zip to your device over MTP* and flash it using [Install] in TWRP.
Click to expand...
Click to collapse
just quoting from the original thread by jcadduono.
Had that problem with a brand new phone, just wanted to get into download mode to see if the phone was tampered with and boom, flash screen with the red warning, flashed stock KSA (phone original CSC) , worked and phone was formatted, another surprise was faced, google did not accept my gmail account, had to shut down phone for 72 hours as read in my google search for people encountering same issue, once the 72 hours passed I was able to sign in and using my phone again.
maxkento said:
Have you do a Wipe then Format Data.
Then flash the no-verity-opt-encrypt zip in TWRP
just quoting from the original thread by jcadduono.
Click to expand...
Click to collapse
taiseer999 said:
Had that problem with a brand new phone, just wanted to get into download mode to see if the phone was tampered with and boom, flash screen with the red warning, flashed stock KSA (phone original CSC) , worked and phone was formatted, another surprise was faced, google did not accept my gmail account, had to shut down phone for 72 hours as read in my google search for people encountering same issue, once the 72 hours passed I was able to sign in and using my phone again.
Click to expand...
Click to collapse
Yes, flashed both Zips in recovery. I used my regular google account during the initial set up. If i wait for 72 hours, will the phone just boot back online just fine? Still, how do i make sure it wont goto the FRP lock again while trying to reboot or reboot to TWRP?
Solved,
Flashed with stock firmware, logged in with same google account, rooted with TWRP, installed Zubi's sound mod. Made sure to keep the 'OEM Unlock' stay turned on.
anoopgopalpt said:
Flashed with stock firmware, logged in with same google account, rooted with TWRP, installed Zubi's sound mod. Made sure to keep the 'OEM Unlock' stay turned on.
Click to expand...
Click to collapse
Helo
But U did this after 72 hours?
There are several methods depending on firmware version installed on your phone. Basically you have to enter in your phone, launch chrome, install an app which gives you the possibility to log into your google account from chrome and not set-up program.
I used successfully the Bluetooth method. Search for with google. You need a bluetooth headset and follow the steps described on youtube.
BTW. My phone was brand new and I flashed different official samsung firmware ( csc). I had to change google password in between and that resulted in FRP lock....
The wait time is 24 hours as is stated in google docs from site
Sent from my SM-G935F using XDA-Developers mobile app
Hello I have a related problem, opened a new thread, but my thread was closed, because my problem is related to this one, but more complicated. I have the same problem with FRP lock as described here, I can turn on the download mode but it wont be recognized by my computer. I tried different usb cables, drivers, even computers, it wont help. I cant flash it with odin, smartswitch, kies, no matter what I try. If I go to recovery mode it says `dm-verity verification failed...`and if I choose `apply update from ADB or SD card` it says `update from external storage disabled`. I dont know what to do anymore Its a new phone
FRP Block - no Dev Tools enabled
Hey guys,
you're my last resort, I've tried everything I happened to come across, to no avail.
First off, I did something incredibly stupid, don't even ask me why, as I have no idea what the heck drove me to do this in the first place.
Anyways, I was using the stock ROM on my S7 Edge, not tweaked or tinkered with besides the usual CF-Auto_Root. It never caused any trouble whatsoever. But for no reason at all this morning I decided to disable USB debuggin and OEM unlock. A short while later I rebooted my phone, which ended up in "Custom binary blocked by FRP Lock".
I gave a factory reset a try, but that obviously didn't change a thing. So I went to sammobile.com and downloaded the latest official stock ROM for my device and tried flashing it with Odin. Unfortnately Odin always fails with "Complete(Write) operation failed.", which I assume is because I messed with the settings in dev mode.
Next stop: ADB. I've never used that thing before, but I thought I should possibly be able to get it done following a simple guide. Unfortunately ADB won't even list my device when typing "adb devices". It's just an empty list.
So please guys, give me some tipps on how I can bring my phone back to life.
(Soft-)Bricked S7 Edge/G935F with FRP lock & DRK error, but no root/OEM unlock/ADB
Hello guys,
I bought a, what I thought to be, soft bricked S7 Edge (G935F) from the bay. It was listed as having sw issues, so I thought I could easily fix the issue myself. Stupid me, this one really isn't easy to fix. I've tried a lot of different hints that I found meandering around the web, but none of them have proofed working so far. I would appreciate some help because I don't seem to be making any progress.
When I got the phone, it would boot directly into Android Recovery with a dm-verity error on the bottom.
Below is what I have tried already:
1 . First I did the obvious, factory reset and wipe partition. No change.
2. Downloaded the latest firmware with updato (SM-G935F Region DBT) and flashed with Odin. It then booted into a screen with a hazard sign and a DRK error (Device does not have DRK, please install DRK first. press any button). Then returned to Android Recovery with variations of the DRK and dm-verity error messages
3. I flashed the same firmware again. This time the phone booted up to a Samsung error that said to use SmartSwitch's Emergency recovery. I tried but it asks for a recovery code and I don't have one.
4. I used an older version of SmartSwitch which gave me the initialization option where you need to input the device model and SN - SmartSwitch decided not to cooperate and noted that the S7 edge does not support initialization
5. I tried to flash CF-autoroot but it gave an error in Odin and failed because it is "Blocked by FRP Lock". I can't boot normally into android. Any workaround?
6. I used a dm-verity workaround file (G935FXXU1DQC4_FIX_DRK_dm-verity.tar) to actually get the phone booted up- but then it asks for the account information to do away with the FRP lock. And the former owner does not want to give me his login information. In addition, none of the workarounds (bluetooth, modem terminal prompts, etc.) did work.
7. Flashed oldest Android version I could find for the G935F - 5.1.1 - this gave me a prompt right after reboot that looks like the password request for encrypting memory. default_password and variations did not work. I am still stuck with...
No Support SINGLE-SKU
Supported API: 3
dm-verity error...
failed code : 0x02
...in the recovery
8. I flashed the combination file and was able to boot into Factory Binary and used the IMEI recovery option which is supposed to fix also the DRK issue. No luck.
So, this is where I am right now. If anyone out there still has sparks of hope, I would be delighted to hear about them.
Thanks much in advance!
Conversion software and ADB Shell
Small update - I booted into factory mode again using the conversion firmware. This way, I could connect to the device via ADB and use ADB shell. There is a guide (here: https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516) which guides through IMEI recovery using the conversion software and factory mode - that is supposed to also help with DRK issues. Did not work for me.
Another great guide (here: https://forum.xda-developers.com/no...fix-drk-dm-verity-factory-csc-serial-t3422965) used ADB shell to push and repair the DRK with some additional files. Since the device is not rooted, I did not get very far, either.
So, no progress whatsoever.
In summary, I can get the device booted up into factory mode using the conversion firmware, or, by using the dm-verity tweaked firmware, I can end up in the Google Account locked part of the initial start-up settings.
Any ideas?
Have you looked at the process to completely re-do a phone stuck in the Google auth log-in? At least that is how I understand where you are stuck. I have a phone arriving soon that I will need to re-flash to get out of that, via Odin.
JeffDC said:
Have you looked at the process to completely re-do a phone stuck in the Google auth log-in? At east that is how I understand where you are stuck. I have a phone arriving soon that I will need to re-flash to get out of that, via Odin.
Click to expand...
Click to collapse
Hi JeffDC,
Thanks a lot for the reply. How would this process look like? I have flashed the phone with all sorts of variations of Android L, M and N - plus the combination fw and the one with the dm-verity/DRK workaround which at least got the phone booted up. But then I am stuck at the google auth request.
I cannot flash anything custom since the FRP lock is on.
Hence, if there is any other way to re-do the phone as you are saying, I would live to hear about it.
https://forum.xda-developers.com/s7-edge/help/s7-edge-custom-binary-block-frp-lock-t3347688
https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516
https://forum.xda-developers.com/no...fix-drk-dm-verity-factory-csc-serial-t3422965
JeffDC said:
https://forum.xda-developers.com/s7-edge/help/s7-edge-custom-binary-block-frp-lock-t3347688
https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516
https://forum.xda-developers.com/no...fix-drk-dm-verity-factory-csc-serial-t3422965
Click to expand...
Click to collapse
Hi JeffDC,
Thanks a lot for the links.
Link #1: I can flash the file #1 and get the device visible for ADB by using the combination FW before starting the steps. Unfortunately, step #2 does not work due to lack of permissions. I guess because of missing root.
Links #2 and #3: These are the guides I was already referencing in my post #2 - they both do not work due to, I guess, missing root.
Smart Switch initialization
Update: I got smart switch to do the update and initialization for the device. Workaround was to use a different real serial number than the one of the actual device (I can only assume that it has got to do with country presets).
Cool stuff, all went smooth - but, still the same result. The device ends up in recovery showing the dm-verity error (failed code : 0x02) with FRP lock on and no root.
https://forum.xda-developers.com/ve...-factory-reset-protect-unlock-t3414590/page11
Interesting read, particularly ignoring the trojan squabbling.
Uses script and setup files to get around FRP.
I suggest you to re-try flashing with Odin the Stock Marshmallow Firmware. Then Boot Into Stock Recovery do a Full Wipe.
zzThrain said:
I suggest you to re-try flashing with Odin the Stock Marshmallow Firmware. Then Boot Into Stock Recovery do a Full Wipe.
Click to expand...
Click to collapse
Thanks for the recommendation. Done that (MM downgrade and full wipe) - same result, still DRK error only booting to recovery.
JeffDC said:
https://forum.xda-developers.com/ve...-factory-reset-protect-unlock-t3414590/page11
Interesting read, particularly ignoring the trojan squabbling.
Uses script and setup files to get around FRP.
Click to expand...
Click to collapse
Hi JEffDC, thanks for the follow-up hints. Very interesting read and approach. As commented in the other thread, I think the package download link in the opening post is dead. I am also curious to see 2 more complexities in action:
1. Will this work on a G935F variant (Exynos vs Snapdragon)?
2. The only way for me to get to the Google Account prompt is by using the modded dm-verity version mentioned in my first post - but I am not sure I can get ADB access enabled simultaneously
Good luck.
Deleted
Hey sathiere,
Came across this. It apparently removes the FRP before the system can start it up! Let me know what you think. I'm going to try it on a locked Edge next week or two. Seems to go right after the FRP protection file.
https://forum.xda-developers.com/galaxy-s7/help/how-to-bypass-frp-galaxy-s7-possibly-6-t3622126
and the download link works.
JeffDC said:
Hey sathiere,
Came across this. It apparently removes the FRP before the system can start it up! Let me know what you think. I'm going to try it on a locked Edge next week or two. Seems to go right after the FRP protection file.
https://forum.xda-developers.com/galaxy-s7/help/how-to-bypass-frp-galaxy-s7-possibly-6-t3622126
and the download link works.
Click to expand...
Click to collapse
Hi JeffDC, came across that thread last night - checked it out, but cannot really make sense of it just now. I will be posting directly in this one in the next minutes.
Regarding the link for the other thread - the google drive link for me shows invalid/no content...
sathiere said:
Hi JeffDC, came across that thread last night - checked it out, but cannot really make sense of it just now. I will be posting directly in this one in the next minutes.
Regarding the link for the other thread - the google drive link for me shows invalid/no content...
Click to expand...
Click to collapse
Yes, I am hoping for a response to my post there, near the end, clarifying. I think I get the method, and it's really pretty straight forward, really.
sathiere, I think basically what it does is provide two connections to the phone at the same time, one via Odin, and the other via direct ADB.
Step one is to flash a Universal boot loader, which is unlocked or can be unlocked via ADB. Now with the locked boot loader out of the way, on to getting rid of FRP.
Step two is run the. bat file which deletes the Persistence file, which is the Google encrypted setup file/FRP file. BOOM, FRP gone.
Then either stay on the Universal bootloader, or go back and flash the OEM.
Brilliant!
I have the same problem with a sm930f binary 2 boot loader. Stock Rom doesn't start and frp lock. How you fix it ? Thank you
Try this method
https://forum.xda-developers.com/general/general/solved-bypass-frp-lock-drk-error-t3779082
Hey All
Was looking for some help. I have a Galaxy sm-t550 with a passcode lock. I am unable to do a hard reset (holding down power + volume up + home button) because this device has been locked to an MDM, so that option is out.
I have successfully flashed the stock firmware using Odin downloaded from SamMobile. The issue is that is hasn't erased the user data and I'm back where I started. The only file contained in the download was the AP file (No BL or CSC). Is there a way to flash with Odin using this file to completely erase the old user data? Maybe it's simple but couldn't find this exact situation on the forum.
Thanks!
bhoebler said:
Hey All
Was looking for some help. I have a Galaxy sm-t550 with a passcode lock. I am unable to do a hard reset (holding down power + volume up + home button) because this device has been locked to an MDM, so that option is out.
I have successfully flashed the stock firmware using Odin downloaded from SamMobile. The issue is that is hasn't erased the user data and I'm back where I started. The only file contained in the download was the AP file (No BL or CSC). Is there a way to flash with Odin using this file to completely erase the old user data? Maybe it's simple but couldn't find this exact situation on the forum.
Thanks!
Click to expand...
Click to collapse
Current firmware build and why does it have an mdm in the first place?
ashyx said:
Current firmware build and why does it have an mdm in the first place?
Click to expand...
Click to collapse
It's through my company that uses an MDM. User forgot passcode and it's not connect to WiFi so can't sync remotely.
Current build is 6.0. Just flashing to 7.0.1 T550XXU1CQJ6
bhoebler said:
It's through my company that uses an MDM. User forgot passcode and it's not connect to WiFi so can't sync remotely.
Current build is 6.0. Just flashing to 7.0.1 T550XXU1CQJ6
Click to expand...
Click to collapse
Stop don't flash an update!
ashyx said:
Stop don't flash an update!
Click to expand...
Click to collapse
Ok. Well, I flashed to T550XXU1CQJ6 but I can always flash back to 6.0.1.
Do you know of any solutions?
bhoebler said:
Ok. Well, I flashed to T550XXU1CQJ6 but I can always flash back to 6.0.1.
Do you know of any solutions?
Click to expand...
Click to collapse
Install the combination firmware then factory reset from settings. Hopefully it should wipe mdm.
Enable OEM unlock also in developer settings if it's available.
ashyx said:
Install the combination firmware then factory reset from settings. Hopefully it should wipe mdm.
Enable OEM unlock also in developer settings if it's available.
Click to expand...
Click to collapse
I'm in the same boat. Son bought a tablet on Offerup. Dude quickly removed his seller profile. Son didn't even test to see if the device was locked as the buyer quote on quote told him "That the device was just dead and needed a charge." Device can't be factory reset due to MDM lock.
No idea what the password may be.
Unable to reach encryption settings to force the device to wipe itself due to a password..
Feels like he just bought a really expensive paperweight. Mind helping? I'll post any other information that is needed.
bhoebler said:
Ok. Well, I flashed to T550XXU1CQJ6 but I can always flash back to 6.0.1.
Do you know of any solutions?
Click to expand...
Click to collapse
Have You fixed it yet?
I'd say pop a sim card in and sync it with the mdm database
Cannot find a way to do it otherwise,
Tab 5se Stock firmware
So I bought a 3rd 5se from a third party, all I checked for was for FRP lock, well it wasn't locked, but when I got it home and rebooted, it says is has a unlocked bootloader. So I hard factory reset it and now it states that only stock firmware can be installed in boot and won't go any further.
So I'm guessing I need to use ODIN to flash a factory ROM but I'm not sure which one as I can't seem to find a USA one on Sammoble, I do see a Canada one though.
Which version of ODIN should I use (WIN 10)
Which ROM, I'm in the USA, WIFI ONLY SM-T720, country code ?
Any other tips, as I haven't flashed anything in almost a decade probably.
Need to get this back to all stock, help
You want the XAR country code version which is the US rom. For Odin, use the newest version for our tablet. Good luck.
puredigital said:
Tab 5se Stock firmware
So I bought a 3rd 5se from a third party, all I checked for was for FRP lock, well it wasn't locked, but when I got it home and rebooted, it says is has a unlocked bootloader. So I hard factory reset it and now it states that only stock firmware can be installed in boot and won't go any further.
So I'm guessing I need to use ODIN to flash a factory ROM but I'm not sure which one as I can't seem to find a USA one on Sammoble, I do see a Canada one though.
Which version of ODIN should I use (WIN 10)
Which ROM, I'm in the USA, WIFI ONLY SM-T720, country code ?
Any other tips, as I haven't flashed anything in almost a decade probably.
Need to get this back to all stock, help
Click to expand...
Click to collapse
I use Frija instead of Sammobile to get the latest stock. Just use SM-T720 as the model and XAR as the CSC. If you search for how to unlock the bootloader, you can use the same proceedure to relock it. It should perform a factory reset as part of the process and you might not need to reflash a ROM.
Not sure..
Since the device won't turn off, restart nor go into download mode
Aqua blue sorta cyan screen. Top in red (like a terminal response) says," Only official released binaries are allowed to be flashed (vbmeta)"
Then on main screen in center;
Security Error: This phone has been flashed with unauthorized software & is locked. Call your mobile operator for additional support
lewmur said:
I use Frija instead of Sammobile to get the latest stock. Just use SM-T720 as the model and XAR as the CSC. If you search for how to unlock the bootloader, you can use the same proceedure to relock it. It should perform a factory reset as part of the process and you might not need to reflash a ROM.
Click to expand...
Click to collapse
puredigital said:
Since the device won't turn off, restart nor go into download mode
Aqua blue sorta cyan screen. Top in red (like a terminal response) says," Only official released binaries are allowed to be flashed (vbmeta)"
Then on main screen in center;
Security Error: This phone has been flashed with unauthorized software & is locked. Call your mobile operator for additional support
Click to expand...
Click to collapse
The only time a ran into a situation where I couldn't turn off that tablet, I just had to put it aside for a day or so till the battery ran down. Then use the method of holding both vol up and down, and NOT power, and then plugging in the cable from the PC. Must be from PC and not charger.
puredigital said:
Since the device won't turn off, restart nor go into download mode
Aqua blue sorta cyan screen. Top in red (like a terminal response) says," Only official released binaries are allowed to be flashed (vbmeta)"
Then on main screen in center;
Security Error: This phone has been flashed with unauthorized software & is locked. Call your mobile operator for additional support
Click to expand...
Click to collapse
I ran into this recently when I went back to stock to get the fingerprint for Magisk Module and then went back to Lineage. You just need to Odin the factory firmware. The tablet will turn off, I think the key combination to force it off is power and volume down? Its been a few weeks, but I was able to get back into download mode. I found other threads for samsung phones that had this same issue and basically used them as rough guides.
As mentioned you just need to use XAR ROMs, your box should say XAR. I believe both Canada and Cellular South ROMs will come up as XAR roms IIRC?
Bruh. I had the same issue and you will not be able to flash your way around and FRP lock. I found a guy on eBay to remove the FRP lock and NOT through flashing. For $10 is was done in 10 minutes. I get if you want to figure it out. I'm a flasher and love to figure this **** out too but with a recent update Samsung blocks this. Trust me. Spend $10 and it's done. Also many people say they can do this on eBay. I only recommend this guy: https://www.ebay.com/itm/273424666857. Just select a new auction of his and message him.
Sent from my SM-T720 using Tapatalk
elcidroyale said:
Bruh. I had the same issue and you will not be able to flash your way around and FRP lock. I found a guy on eBay to remove the FRP lock and NOT through flashing. For $10 is was done in 10 minutes. I get if you want to figure it out. I'm a flasher and love to figure this **** out too but with a recent update Samsung blocks this. Trust me. Spend $10 and it's done. Also many people say they can do this on eBay. I only recommend this guy: https://www.ebay.com/itm/273424666857. Just select a new auction of his and message him.
Sent from my SM-T720 using Tapatalk
Click to expand...
Click to collapse
He said he checked to make sure this was not the FRP lock. Assuming this is the same message I got which says only official binaries can be flashed, please take this to a service center and it there maybe a cost involved (obviously I'm paraphrasing), you can fix it with Odin. I was on the latest firmware as well, as I updated fully to get the fingerprint for the MagiskHide module. This sounds like a different issue, to me.
I mean if that works it's $10 well spent I guess.
Oh my apologies as I misread his post. I just saw "FRP" and chimed in. Hope he gets it sorted out.
OhioYJ said:
He said he checked to make sure this was not the FRP lock. Assuming this is the same message I got which says only official binaries can be flashed, please take this to a service center and it there maybe a cost involved (obviously I'm paraphrasing), you can fix it with Odin. I was on the latest firmware as well, as I updated fully to get the fingerprint for the MagiskHide module. This sounds like a different issue, to me.
I mean if that works it's $10 well spent I guess.
Click to expand...
Click to collapse
Almost !
Well, I finally reflashed the device with factory stuff, it's working fine now, no locks, except now it tells me the bootloader is unlocked on boot. I flashed it with Odin, no options, just loaded the 4 files and done.
How do I get this to STOCK, out of the box status. Steps ?
Hello Everyone,
First of all I am a newbie when it comes to Android, so forgive me for asking such a noob question.
So here is the story, my girlfriend's dad passed away few months ago. He used an old Samsung S8, sadly we do not know what the login pattern is or his Google account password (We did try recovery options but to no avail)
As there was no other option, I went ahead and had the phone factory reset, and from what I learned the phone is now FRP locked.
After a reading a few more guides I downloaded a tool called Odin and some 'Stock ROM' and flashed it hoping that would resolve the issue (Oh boy, how wrong I was) and the phone is now stuck on a screen saying "Error occurred while updating the device software, use the emergency recovery function"
My girlfriend just wanted to be able to use it for some time, and now I feel really bad for screwing it up.
Just wondering what my options are and if the phone is salvageable at all?
Hey, are you sure you downloaded the right ROM for this S8? Since there are two models of this phone, each with a different chipset (Exynos / Qualcomm Snapdragon). I feel like this error could come from a bad firmware? Does Odin still see the phone when you connect it to the PC?
Edit: Apparently people solved this problem using Samsung's Smart Switch on PC.
Yes, I think I downloaded the correct one. The phone is from Telstra Australia and so downloaded the ROM from Samfrew that was listed as Telstra, I typed in the model number which is SM-G950F it is this firmware that came up.
Yes when I put the phone into Recovery mode and connect to PC, Odin detects it, but the flash gets stuck halfway. I've loaded the BL, AP, CP and CSC that came within the ZIP file from Samfrew and under options only ticked 'Auto Reboot' and 'F.Reset Time'
Also tried just with the BL and AP but same deal.
blackslash said:
Also tried just with the BL and AP but same deal.
Click to expand...
Click to collapse
Have you tried Samsung's Smart Switch app on PC? Apparently people successfuly fixed this error with it.
blackslash said:
Also tried just with the BL and AP but same deal.
Click to expand...
Click to collapse
I've never had to deal with a Samsung that has a FRP lock, that could just be the reason why the flashing fails, i wouldn't know. I hope you can get the Factory Reset to work :/
Also tried the Smart Switch app but it would recognize the phone. Thank you for looking into this.
You could send a message to this user "makeyourself" : https://forum.xda-developers.com/t/i-think-i-screwed-the-pooch-on-this-one.3939572/post-79729654 , he seems aware about the FRP locks / flashing issues.
Good luck with your S8.
@Derbi75 thanks heaps, will message makeyourself now.
Ideas? Anyone?
blackslash said:
Ideas? Anyone?
Click to expand...
Click to collapse
From what I know, the error only appears if the phone was interrupted during flashing. Such as, Odin was writing into phone but you probably removed the USB or stuff. The screen you see is actually download mode. It is just renamed. Try plugging in your device when it's on the error screen then re-flash it.