Hi everyone, I installed RR on my P10 lite (WAS-LX1A) and all used to work great except for the sound so I thought that the ROM was not good and I began to reinstall the backup of EMUI I did with TWRP but without success. So I searched online the stock firmware and I found several versions and I tried to install one using a guide and It seemed to work until I began the first configuration of the device. Every time I finish the configuration It resends me to the beginning and I cannot install other firmwares because they stuck on 5% or it gives me "Installation failed". I cannot install TWRP too because fastboot says "command not allowed" when I try to flash it even if my bootloader and Phone Finder are unlocked. Please help me.
I succeded in installing EMUI bit it's NRD90M test keys. I found online some guides that say to use twrp in order to flash the full update. But I cannot install any twrp because when I go in fastboot mode it says:
Bootloader unlock (red)
FRP Lock (green)
you need restore device with dcphoenix(paid method)
For any steps of fastboot, need frp unlock.
rambik33 said:
For any steps of fastboot, need frp unlock.
Click to expand...
Click to collapse
fastboot oem unlock xxxxxxxxxxxxxxxxxxxxxx (bootloader code)
exilio99 said:
Hi everyone, I installed RR on my P10 lite (WAS-LX1A) and all used to work great except for the sound so I thought that the ROM was not good and I began to reinstall the backup of EMUI I did with TWRP but without success. So I searched online the stock firmware and I found several versions and I tried to install one using a guide and It seemed to work until I began the first configuration of the device. Every time I finish the configuration It resends me to the beginning and I cannot install other firmwares because they stuck on 5% or it gives me "Installation failed". I cannot install TWRP too because fastboot says "command not allowed" when I try to flash it even if my bootloader and Phone Finder are unlocked. Please help me.
Click to expand...
Click to collapse
Hello, you can not do nothing if either FRP or bootloader are locked. You can either use DC Unlocker to unlock the FRP lock or DC Phoenix To Flash The Stock Image all over again... or you can take it to repair for mainboard replacement. I reccomend that you unlock frp and then extract the stock firmware using huawei update extractor. You can get the firmware by installing Firmware Finder On your pc and then searching for an appropriate firmware.
Thanks, I succeeded installing a stock firmware I found online but there's another problem now. Some stock apps are missing just like the file gestor and the updater in settings. If I go in phone information it gives me that my firmware is NRD90m test-keys. What should do I do?
exilio99 said:
Thanks, I succeeded installing a stock firmware I found online but there's another problem now. Some stock apps are missing just like the file gestor and the updater in settings. If I go in phone information it gives me that my firmware is NRD90m test-keys. What should do I do?
Click to expand...
Click to collapse
missing some apps because of dead cust,vendor,product...etc.
You can restore your phone using stock system updater and huawei firmware finder's proxy server
update to your device firmware version's fullOTA
and you can back to stock!
tested with my was-lx2j
sorry for my bad english
I'll try it. Thank you!
hayabusa2yk said:
missing firmware because of dead cust,vendor,product...etc.
You can restore your phone using stock system updater and huawei firmware finder's proxy server
update to your device firmware version's fullOTA
and you can back to stock!
tested with my was-lx2j
sorry for my bad english
Click to expand...
Click to collapse
is it possible install apk from system/priv-app or similiar, i think is missed
foliaje said:
is it possible install apk from system/priv-app or similiar, i think is missed
Click to expand...
Click to collapse
Yes you can but no need to do it because it already installed.
Sorry for my bad English
hayabusa2yk said:
Yes you can but no need to do it because it already installed.
Sorry for my bad English
Click to expand...
Click to collapse
Excuse me but in 4th post, he hasn't an updater option in settings, in my second huawei(semi-breaked)
No updater, no file manager, no stock gapps(i dont care), build number system-5.1.78(fail to change oeminfo etc..) so tell me clearly like fix.
foliaje said:
Excuse me but in 4th post, he hasn't an updater option in settings, in my second huawei(semi-breaked)
No updater, no file manager, no stock gapps(i dont care), build number system-5.1.78(fail to change oeminfo etc..) so tell me clearly like fix.
Click to expand...
Click to collapse
try firmware updating with hisuite + huawei firmware finder's proxy
I tried but it's stopped at 5% of installation. I cannot do a update through the updater because it doesn't exist in this test version. Can I try something else?
I tried with hisuite and firmware finder using the proxy method but it can't find any update...
Related
Hi Guys
I have huawei p9 lite and I need firmware VNS-L31C900B150
I can't find it in the internet
Please help I need it to reflash my phone ..
Use Huawei firmware finder or just use the c432 version, I recommend it
Potato997 said:
Use Huawei firmware finder or just use the c432 version, I recommend it
Click to expand...
Click to collapse
I already tryed C432 and it doesn't work
And my phone is off because it doesn't have any OS so I can't use huawei firmware finder
Is there any idea or solution for this problem..!
Huawei firmware finder is also a program for Windows, Google it
Potato997 said:
Huawei firmware finder is also a program for Windows, Google it
Click to expand...
Click to collapse
Yeah now I found it and tried it but it's doesn't work
I can't found my device firmware ..
Please any more idea
Can you access to fastboot and TWRP?
Potato997 said:
Can you access to fastboot and TWRP?
Click to expand...
Click to collapse
do u know how to flash Cust, Vendor, Product etc. for p9 lite???
or can you give me link to download them and flash?
Potato997 said:
Can you access to fastboot and TWRP?
Click to expand...
Click to collapse
yes I can access to fastboot only
can't access to TWRP
Try to flash Meticulus's TWRP, if it does not work try Revolution recovery
Potato997 said:
Try to flash Meticulus's TWRP, if it does not work try Revolution recovery
Click to expand...
Click to collapse
Already I tried to flash TWRP and it flashed good but when I try to get TWRP mode my device doesn't work
here is my full problem https://forum.xda-developers.com/huawei-p9lite/help/huawei-p9-lite-flashed-formating-t3576669
Potato997 said:
Try to flash Meticulus's TWRP, if it does not work try Revolution recovery
Click to expand...
Click to collapse
Now I get revolution recovery and I can access to it
I want to install lineageOS 14.1 like here https://www.youtube.com/watch?v=hNhv-fKJFaw
but after I finish my phone doesn't work
I think that's because revolution recovery " I cant install TWRP recovery but my phone doesn't work on TWRP I don't know why "
can you help me with this please..
To install LineageOS you have first to downgrade to stock 6.0
You can find countless thread about how-to, after you downgrade to MM you can install LineageOS following the video that you found
Potato997 said:
To install LineageOS you have first to downgrade to stock 6.0
You can find countless thread about how-to, after you downgrade to MM you can install LineageOS following the video that you found
Click to expand...
Click to collapse
I'm not sure if I understand to you
I don't have any os on my phone now
and I tried to install lineageos like video above and everything done but phone doesn't work..
Follow these steps:
1. Unbrick your phone installing stock EMUI 4.1.1 Android 6
2. Unlock bootloader
3. Flash Meticulus's TWRP
4. Install LineageOS following the video
The reason why you have first to install EMUI 4 is because it's the only way to install LineageOS. To restore your device, you can find a lot of thread on our P9 lite subforum, search in Q&A and Guides and you will find a lot of tutorial to unbrick and restore the phone to stock Android 6.
Potato997 said:
Follow these steps:
1. Unbrick your phone installing stock EMUI 4.1.1 Android 6
2. Unlock bootloader
3. Flash Meticulus's TWRP
4. Install LineageOS following the video
The reason why you have first to install EMUI 4 is because it's the only way to install LineageOS. To restore your device, you can find a lot of thread on our P9 lite subforum, search in Q&A and Guides and you will find a lot of tutorial to unbrick and restore the phone to stock Android 6.
Click to expand...
Click to collapse
Thank you because you're here with me..
I tried every firmware to flash it on my device and no one help me
I can't find my device firmware " VNS-L31C900B150 " even with huawei firmware finder
each time I get new problem or just phone tel me incorrect version please download correct version ..
I don't know what I will do to use my phone :crying:
Do you have any idea to re-life my phone..
Did you searched in the forum the guides..? To unbrick the phone you have to boot to TWRP, either Meticulus's or Revolution one, flash the oeminfo of your device, the dload the c432 firmware
Potato997 said:
Did you searched in the forum the guides..? To unbrick the phone you have to boot to TWRP, either Meticulus's or Revolution one, flash the oeminfo of your device, the dload the c432 firmware
Click to expand...
Click to collapse
yeah I tried c432 and device get error " incorrect version please download correct version "
and what you mean in "oeminfo" I can't find results after search for it and my device name on this forum..!
Download this
https://drive.google.com/open?id=0B3sZyHMlYDO0S1c2Y1lNMlJaVXM
Flash it in TWRP
Retry dload c432
Potato997 said:
Download this
https://drive.google.com/open?id=0B3sZyHMlYDO0S1c2Y1lNMlJaVXM
Flash it in TWRP
Retry dload c432
Click to expand...
Click to collapse
Now I really have bad luck :crying::crying::crying:
I flashed the file you give me
and after that reboot phone to try re-dload C432 and I get same problem " incorrect version "
after that I reboot my phone ti back to recovery mode and I get bootloader lucked
And I don't have bootloader code to re-unlock it
What I can do .. " my phone doesn't work "
baselmd47 said:
Now I really have bad luck :crying::crying::crying:
I flashed the file you give me
and after that reboot phone to try re-dload C432 and I get same problem " incorrect version "
after that I reboot my phone ti back to recovery mode and I get bootloader lucked
And I don't have bootloader code to re-unlock it
What I can do .. " my phone doesn't work "
Click to expand...
Click to collapse
Man, you flash wrong oeminfo...
That oeminfo is maybe for VNS-L21...
Regarding bootloader unlock code if you can provide IMEI/SN from phonebox i can generate a unlock code for you.
<how-to unbrick>(TRY THIS AT YOUR OWN RISK)
this method is useful for was-lx2j,and "can boot stock rom" but "Almost apps not found".
1 )back to your stock recovery using
Code:
fastboot flash recovery RECOVERY.ing
2 )In huawei firmware finder,open the proxy server
3 )follow the proxy server's instraction
(POINT:USE THE LINK TO YOUR LAST STOCK FIRMWARE'S FULLOTA CHANGELOG)
exemple:my stock firmware's version before flashing custom rom and bricking is WAS-LX2JC635B175,so I choose it
Code:
Instructions.
1. Enter a link to the changelog of firmware in the "Firmware for install" field and click "Set".
2. Click the button "Register for update". Registration takes place by IP address.
3. After registration, you need to change your DNS address to 81.177.139.39. Dont forget save your original dns settings for restore it later. (You can change it in network settings, router settings or setup like proxy without port in hisuite).
4. Go to Huawei Updater in phone or go to HiSuite and press check update. After that you should get update.
5. After install dont forget to reset the dns settings to the original state.
4 )reboot your p10lite to huawei erecovery (or boot system)
5 )press "download ~"and update your system(or do a system update)
6 )go to stock recovery and do a factory reset
7 )DONE! reboot to system and phone will successfully booting!!!!!!
any questions,reply to this therd or PM me
<oliginal OP:↓>
edit:MY PHONE WAS FULLY UNBRICKED!!!
THX FOR ALL ADVICE!!!
my p10 lite (WAS-LX2J) was bricked...
1)I flashed a lineage unofficial build.
2)I flashed vendor as dd command from twrp shell.
3)I tested the rom
4)I wanted to back to stock rom,so I flashed system.img,cust.img,boot.img from stock firmware using huawei update extractor and fastboot.
5)I wanted to flash vendor but fastboot says command not allowed.
6)reboot to twrp and flash stock vendor as dd,but it fails(partition broken)
now,my p10 lite bricked...
Anyone has solution or twrp backup(system,cust,vendor,boot)???
any answer is welcome....
sorry for my bad english
Can you still get into TWRP? If you go into wipe, advanced, if you select something there you have the option to fix or repair that file system. I would be guessing if I knew what you needed to select though. Any risk is down to you.
Maybe that will fix your error? I have to sometimes do this to the 'data' file system to be able to boot lineageOS.
If you do manage to restore stock filmware successfully please share your steps on the p10 lite forum.
stonedpsycho said:
Can you still get into TWRP? If you go into wipe, advanced, if you select something there you have the option to fix or repair that file system. I would be guessing if I knew what you needed to select though. Any risk is down to you.
Maybe that will fix your error? I have to sometimes do this to the 'data' file system to be able to boot lineageOS.
If you do manage to restore stock filmware successfully please share your steps on the p10 lite forum.
Click to expand...
Click to collapse
yes,I can get into twrp so I repaired filesystem.
I fixed filesystem:vendor and system.
I wiped all data
still bricked
Find out from the OP on this thread if there is a Service firmware for your device. Hopefully you'll be able to fix your device with a service firmware.
miz_pimp said:
Find out from the OP on this thread if there is a Service firmware for your device. Hopefully you'll be able to fix your device with a service firmware.
Click to expand...
Click to collapse
Yes I already saw it but my phone was not found…
but my phone unbricked by another method!!!
thx for your advice
sorry for my bad english
hayabusa2yk said:
Yes I already saw it but my phone was not found…
but my phone unbricked by another method!!!
thx for your advice
sorry for my bad english
Click to expand...
Click to collapse
You have c635 or c719?
I have backups was-lx2jc635b174 hw/jp. Without data and system.
rambik33 said:
You have c635 or c719?
I have backups was-lx2jc635b174 hw/jp. Without data and system.
Click to expand...
Click to collapse
yes,and firmware is same!
thx very much!
I unbricked my phone,but sadly my phone's frp unlocked…
so i'm happy if you send backup!
sorry for my bad english
hayabusa2yk said:
yes,and firmware is same!
thx very much!
I unbricked my phone,but sadly my phone's frp unlocked…
so i'm happy if you send backup!
sorry for my bad english
Click to expand...
Click to collapse
https://yadi.sk/d/8bBC7la-3Pwv8T
rambik33 said:
https://yadi.sk/d/8bBC7la-3Pwv8T
Click to expand...
Click to collapse
thx very much!!!
Hey, I have the same phone and problem (I tried to installl a lineageos). I want to go back to stock rom.
Where can I get the files for this, thanks! (stock recovery, imgs, firmware etc)
mount_E said:
Hey, I have the same phone and problem (I tried to installl a lineageos). I want to go back to stock rom.
Where can I get the files for this, thanks! (stock recovery, imgs, firmware etc)
Click to expand...
Click to collapse
you can download it with huawei firmware finder!
here:xda
If you want help,contact me at PM so I'll help you...
i am trying to update to b380 ( now 370)
bur every time it fails if got magisk root and twrp 3.1.1-0
i tryed firmware finder but stil fails with twrp
does i do something wrong?? i already tryed with deleting root
bakkertjuh said:
i am trying to update to b380 ( now 370)
bur every time it fails if got magisk root and twrp 3.1.1-0
i tryed firmware finder but stil fails with twrp
does i do something wrong?? i already tryed with deleting root
Click to expand...
Click to collapse
Hello
it's easy to understand.
huawei needs the recovery stock to install.
so, just delete twrp.
To do it just with adb and fastboot, flash recovery.img of your version.
** control / fastboot flash recovery RECOVERY.img
now, download your ota update.
he will install it.
or you can find recovery stock, In the update.app (open with huawei extrator), recover the file you wanted.
here is
huawei extrator https://forum.xda-developers.com/showthread.php?t=2433454
Chisetdel31260 said:
Hello
it's easy to understand.
huawei needs the recovery stock to install.
so, just delete twrp.
To do it just with adb and fastboot, flash recovery.img of your version.
** control / fastboot flash recovery RECOVERY.img
now, download your ota update.
he will install it.
or you can find recovery stock, In the update.app (open with huawei extrator), recover the file you wanted.
here is
huawei extrator https://forum.xda-developers.com/showthread.php?t=2433454
Click to expand...
Click to collapse
Ok I will try this tomorrow and let you know
ive got error failed to check the update files please download the package agian
ive tryed 3 times now still te same
i will try full ota now with firmware finder
bakkertjuh said:
ive got error failed to check the update files please download the package agian
ive tryed 3 times now still te same
i will try full ota now with firmware finder
Click to expand...
Click to collapse
Hello
tell us right away the phone version you have?
it's easier to help you?
ex, I am p9 lite VNS-L31c432b394,
so you are vns-l ?? c ??? B ???.
Maybe there is an easier and faster way to get your phone up.
personally, I have never used FF to install, except to download the firmware.
L31c432b370 but after trying b380 full did get an error after 60% .. i rebooted the phone and i have b380 then i received ota message saying b388 is available so I tried to install that and it worked completely so i don't know why it did not updated from 370 to 380 normally but its ok now thanks for the help
bakkertjuh said:
L31c432b370 but after trying b380 full did get an error after 60% .. i rebooted the phone and i have b380 then i received ota message saying b388 is available so I tried to install that and it worked completely so i don't know why it did not updated from 370 to 380 normally but its ok now thanks for the help
Click to expand...
Click to collapse
have you tested the update with HiSuite?
just connect the phone to the pc, hisuite turns on, and press click on update system.
For me, it works, b160 he offers me b370 and then b380.
Yeah same problems with hisuite then.. I even have tried dload still errors then
bakkertjuh said:
Yeah same problems with hisuite then.. I even have tried dload still errors then
Click to expand...
Click to collapse
I said my last words with you.
I still have a solution.
I will put the firmware vns-l31c432b394 the latest on my google drive.
Like, you could install twrp and the root.
I suppose you knew how to return to MM (c432b160). ok for you.
so,
since, vns-l31c432b160, bootloader code, install twrp for MM, went to wipe, check all except SD card and wipe to wipe. back, back, go to install, install update.zip and install the data full l31.zip.
reboot.
There you go.
problem will be a little longt, it takes time to send it in google-drive.
he tells me 8am so tomorrow I give you the google-drive link.
vns-l31c432b394 full-ota-mf-pv https://drive.google.com/open?id=1UG7Q9HubCRZ2Qo-tQRoEpxikeF9eJBwo
Hi,
Two weeks ago I unlocked and rooted my mi a1 (which was running android pie v10.0.3.0.) with magisk. When I saw the January update was released, I wanted to unroot the phone and I uninstalled magisk. However, the phone rebooted and there was only “no command” screen.
Now I wanted to flash the stock rom to save my phone by flashing the stock rom again, but as you may know, Xiaomi hasn’t released the official android pie firmware on its website. And I can’t go back to Oreo firmware due to anti rollback protection.
I found several v10.0.3.0 firmwares on the internet and downloaded them. However this time I’m having trouble while flashing the stock rom via Mi Flash Tool. When I wanted to flash the firmware, Mi Flash Tools gave error “can not found file flash_all_lock.bat” or any other bats. When I checked the firmware files, there were _Flash_lock.bat, _Flash_.bat, _Flash_erase_userdata_lock.bat and _Flash_erase_userdata_lock.bat files.
Any ideas how I can sort this problem out? Any immediate assistance will be much appreciated.
Thanks
finxminx said:
Hi,
Two weeks ago I unlocked and rooted my mi a1 (which was running android pie v10.0.3.0.) with magisk. When I saw the January update was released, I wanted to unroot the phone and I uninstalled magisk. However, the phone rebooted and there was only “no command” screen.
Now I wanted to flash the stock rom to save my phone by flashing the stock rom again, but as you may know, Xiaomi hasn’t released the official android pie firmware on its website. And I can’t go back to Oreo firmware due to anti rollback protection.
I found several v10.0.3.0 firmwares on the internet and downloaded them. However this time I’m having trouble while flashing the stock rom via Mi Flash Tool. When I wanted to flash the firmware, Mi Flash Tools gave error “can not found file flash_all_lock.bat” or any other bats. When I checked the firmware files, there were “_Flash_lock.bat”, “_Flash_.bat”, “_Flash_erase_userdata_lock.bat” and “_Flash_erase_userdata_lock.bat” files.
Any ideas how I can sort this problem out? Any immediate assistance will be much appreciated.
Thanks
Click to expand...
Click to collapse
what about deleting those underscores before each word, i think they shouldn't be there.
kuartito said:
what about deleting those underscores before each word, i think they shouldn't be there.
Click to expand...
Click to collapse
I tried but no success. Maybe I'm doing wrong to use mi flash tool. Maybe I should just try to use bat files through fastboot, I don't know. I haven't found any information on the forum or google if I can do it like that.
finxminx said:
I tried but no success. Maybe I'm doing wrong to use mi flash tool. Maybe I should just try to use bat files through fastboot, I don't know. I haven't found any information on the forum or google if I can do it like that.
Click to expand...
Click to collapse
i'm by no means an expert and my advice has no value at all, but i don't see why you wouldn't give flashing from fastboot a try.
1: Those firmware are not meant for miflash, flash using twrp
2: Don't use the script that locks if you wanna avoid trouble.
What directory did you select in miflash?
JakobSWE said:
1: Those firmware are not meant for miflash, flash using twrp
2: Don't use the script that locks if you wanna avoid trouble.
Click to expand...
Click to collapse
I downloaded 3 copies of 10.0.3.0 firmware from different places and each one claimed those firmwares were for fastboot, not twrp. I attached the folder's screenshot.
henk_j said:
What directory did you select in miflash?
Click to expand...
Click to collapse
I attached the screenshot of the directory.
finxminx said:
Hi,
Two weeks ago I unlocked and rooted my mi a1 (which was running android pie v10.0.3.0.) with magisk. When I saw the January update was released, I wanted to unroot the phone and I uninstalled magisk. However, the phone rebooted and there was only “no command” screen.
Now I wanted to flash the stock rom to save my phone by flashing the stock rom again, but as you may know, Xiaomi hasn’t released the official android pie firmware on its website. And I can’t go back to Oreo firmware due to anti rollback protection.
I found several v10.0.3.0 firmwares on the internet and downloaded them. However this time I’m having trouble while flashing the stock rom via Mi Flash Tool. When I wanted to flash the firmware, Mi Flash Tools gave error “can not found file flash_all_lock.bat” or any other bats. When I checked the firmware files, there were _Flash_lock.bat, _Flash_.bat, _Flash_erase_userdata_lock.bat and _Flash_erase_userdata_lock.bat files.
Any ideas how I can sort this problem out? Any immediate assistance will be much appreciated.
Thanks
Click to expand...
Click to collapse
flash this official pie rom
http://bigota.d.miui.com/V10.0.4.0....0.PDHMIXM_20190104.0000.00_9.0_2cee840c96.tgz
...
Stuck in Loading Screen after Update Magisk
I have the same problem here,, This morning i got nontification from Magisk to update to the new version,, and update done, Magisk start reboot,,, when reboot,, i always stuck on Loading Screen. I check from TWRP my Internal Storage cannot detect by Pc,, So i think i cannot doing Flashing by TWRP,, I'm wipe out all data to clear this mess,, so i start to do a flashing with MIFlash, i'm download the custom rom and start flashing.. and i got this message "cannot found file flash_all_lock.bat"
Sorry for my Bad english.. cus i'm still young
Hello, i have a mobile Huawei P9 lite model VNS L31 Single Sim. Two months ago I have flashed EliteRom and I didn't have any problems. Recently I wanted to install the stock rom but I couldn't. I tried to go back to Stock from 7.6 with dload, but keep getting an "Software install failed! Incompatibility with current version". I tried with firmware finder app but dns method don't work. Sorry for my bad english but I hope you can help me!
Vanno221 said:
Hello, i have a mobile Huawei P9 lite model VNS L31 Single Sim. Two months ago I have flashed EliteRom and I didn't have any problems. Recently I wanted to install the stock rom but I couldn't. I tried to go back to Stock from 7.6 with dload, but keep getting an "Software install failed! Incompatibility with current version". I tried with firmware finder app but dns method don't work. Sorry for my bad english but I hope you can help me!
Click to expand...
Click to collapse
Hello,
Search for the Huawei Recovery Updater thread,
download the .zip and your rom.
The guide is within the thread.
Pay attention and choose the correct rom, they are three files (FULL OTA - MF)
If you have any doubts about the rom let me know.
Neither the developers of HuRU nor I will take any responsibility
for what you do with your device.
Cheers
Dadditz said:
Hello,
Search for the Huawei Recovery Updater thread,
download the .zip and your rom.
The guide is within the thread.
Pay attention and choose the correct rom, they are three files (FULL OTA - MF)
If you have any doubts about the rom let me know.
Neither the developers of HuRU nor I will take any responsibility
for what you do with your device.
Cheers
Click to expand...
Click to collapse
Thanks for the reply! but I have to download all three files (and what's the difference between the three)?
Then it's better if you install a previous version and then update or can I directly download the latest (of stock roms)?
I tried to download the B389 . I put the files in a folder in the SD (renaming them as they should) but after flashing i need to restore my phone. i try by twrp but it gives me an error "Failed to mount '/data (invalid argument)", Unable to mount storage
Vanno221 said:
Thanks for the reply! but I have to download all three files (and what's the difference between the three)?
Then it's better if you install a previous version and then update or can I directly download the latest (of stock roms)?
Click to expand...
Click to collapse
Vanno221 said:
I tried to download the B389 . I put the files in a folder in the SD (renaming them as they should) but after flashing i need to restore my phone. i try by twrp but it gives me an error "Failed to mount '/data (invalid argument)", Unable to mount storage
Click to expand...
Click to collapse
Well dude here i am.
Let's have to say and apologize for this....
before any attempt of flashing you should have done a full nandroid backup
and also know how to go back to stock. Maybe it's not your case.
So, i suggest you a method but you never wrote the firmware you had before
installing EliteRom.
The difference between the roms are ( obviously ) security patches and various fix, etc..,
as well as different versions for single and dual sim.
I wish ask you two questions:
What was the latest stock firmware your device was on and
are your DATA filesystem EXT4 ? (check into the TWRP )
HERE i wrote how i managed to install stock firmware and correctly relocked
the bootloader. ( depend what you want to do )