Database Users

Need help harbricked S8 G950U

Hello,
I really need assistance to unbrick my hard bricked SM-G950U. I need either the service rom (fastboot rom) to flash with QFIL or the SDC repair image for SD card rescue (usually created by Atf box). My phone is hardbricked, it shows "qualcomm hs-usb qdloader 9008" when plugged into pc and it is in fact unresponsive. Please help me.
Thank you.

Hi I just wanted to give this thread a bump... see if there is an official/ unofficial unbrick process for this device... I've read upon the qualcomm unbrick process.. and still have no luck.. if anybody has successfully unbridled their s8.. please pm or as how me some light at the end of this dark and lonely tunnel... Thank you.

Same
dkns1 said:
Hi I just wanted to give this thread a bump... see if there is an official/ unofficial unbrick process for this device... I've read upon the qualcomm unbrick process.. and still have no luck.. if anybody has successfully unbridled their s8.. please pm or as how me some light at the end of this dark and lonely tunnel... Thank you.
Click to expand...
Click to collapse
I'm in the same boat, but it's my wife's S8. Blackscreened while on the charger about an hour after the 8.0 OTA was applied.

dkns1 said:
Hi I just wanted to give this thread a bump... see if there is an official/ unofficial unbrick process for this device... I've read upon the qualcomm unbrick process.. and still have no luck.. if anybody has successfully unbridled their s8.. please pm or as how me some light at the end of this dark and lonely tunnel... Thank you.
Click to expand...
Click to collapse
Westen81 said:
I'm in the same boat, but it's my wife's S8. Blackscreened while on the charger about an hour after the 8.0 OTA was applied.
Click to expand...
Click to collapse
I can confirm there is a edl brick fix. Its up to the man thought if he wants to or has it for release...
@ elliwigy

TheMadScientist said:
I can confirm there is a edl brick fix. Its up to the man thought if he wants to or has it for release...
@ elliwigy
Click to expand...
Click to collapse
The files he currently has are for the S8+, he lost a lot of the stuff he had for other devices in a HDD failure. Still looking for a current FireHose programmer, RawProgram, and Patch files for MSM8998 on the Galaxy S8. If *anybody* has any hints even on where I can get a valid, current set of QFIL files for the SM-G950U, that would be great! If I can get the files and it works, I'll share the version of QPST/QFIL I'm using, etc. on here!
Edit: also, I've been using a USB 3.0 port on the front header with my attempts. My next go at it, I'm going to try one of the 2.0 ports on the back.

I will look back and speak with him. I helped test some edl and first tests where for a 955 so I may still have them myself.

Westen81 said:
The files he currently has are for the S8+, he lost a lot of the stuff he had for other devices in a HDD failure. Still looking for a current FireHose programmer, RawProgram, and Patch files for MSM8998 on the Galaxy S8. If *anybody* has any hints even on where I can get a valid, current set of QFIL files for the SM-G950U, that would be great! If I can get the files and it works, I'll share the version of QPST/QFIL I'm using, etc. on here!
Edit: also, I've been using a USB 3.0 port on the front header with my attempts. My next go at it, I'm going to try one of the 2.0 ports on the back.
Click to expand...
Click to collapse
Are you s8? I have the edl fix for s8 but I have to clear it with him first as they where for testing I have used them. My self. I may have edl recovery for 8+ but I know I got the reg s8s. Keep em put up like gold. Lol

thehaXor said:
Hello,
I really need assistance to unbrick my hard bricked SM-G950U. I need either the service rom (fastboot rom) to flash with QFIL or the SDC repair image for SD card rescue (usually created by Atf box). My phone is hardbricked, it shows "qualcomm hs-usb qdloader 9008" when plugged into pc and it is in fact unresponsive. Please help me.
Thank you.
Click to expand...
Click to collapse
dkns1 said:
Hi I just wanted to give this thread a bump... see if there is an official/ unofficial unbrick process for this device... I've read upon the qualcomm unbrick process.. and still have no luck.. if anybody has successfully unbridled their s8.. please pm or as how me some light at the end of this dark and lonely tunnel... Thank you.
Click to expand...
Click to collapse
Westen81 said:
I'm in the same boat, but it's my wife's S8. Blackscreened while on the charger about an hour after the 8.0 OTA was applied.
Click to expand...
Click to collapse
Ok guys I got the go ahead I have the edl files I can help you guys possibly these are not my work but we can make a telegram chat and we can see if we can get some life back to you guys:good::good::good:

TheMadScientist said:
Are you s8? I have the edl fix for s8 but I have to clear it with him first as they where for testing I have used them. My self. I may have edl recovery for 8+ but I know I got the reg s8s. Keep em put up like gold. Lol
Click to expand...
Click to collapse
Yes, it is a T-Mobile US Galaxy S8 (SM-G950U). I was talking to him in Hangouts the other day when I was trying with the files I do have, he was trying to EDL flash a tablet he has later that day. Thanks for the reply, man!

So here is my log from the most recent attempt:
Validating Application Configuration
Load APP Configuration
COM:-1
SAHARA:True
SAHARA:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
SEARCHPATH:C:\Users\sacre\Downloads\G950U2
RAWPROGRAM:
rawprogram3.xml
PATCH:
patch3.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:UFS
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:True
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
PROVISIONPROGRAMMERPATH:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
PROVISIONXMLPATH:C:\Users\sacre\Downloads\G950U2\provision_samsung.xml
Load ARG Configuration
Validating Download Configuration
Image Search Path: C:\Users\sacre\Downloads\G950U2
RAWPROGRAM file path: C:\Users\sacre\Downloads\G950U2\rawprogram3.xml
PATCH file path:C:\Users\sacre\Downloads\G950U2\patch3.xml
Programmer Path:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
Process Index:0
Image Search Path: C:\Users\sacre\Downloads\G950U2
RAWPROGRAM file path: C:\Users\sacre\Downloads\G950U2\rawprogram0.xml
PATCH file path:C:\Users\sacre\Downloads\G950U2\patch0.xml
Start Download
Program Path:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.exe -p \\.\COM4 -s 13:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf 'Current working dir: C:\Users\sacre\AppData\Roaming\Qualcomm\QFIL
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
02:47:47: Requested ID 13, file: "C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf"
02:47:47: 600504 bytes transferred in 0.172000 seconds (3.3296MBps)
02:47:47: File transferred successfully
02:47:47: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:UFS
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
Binary build date: Jun 3 2015 @ 17:12:06
Build version: 15.06. 3.17.12.06
02:47:51: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=C:\Users\sacre\Downloads\G950U2 --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=UFS
************************************************
02:47:51: INFO: Current working dir (cwd): C:\Users\sacre\AppData\Roaming\Qualcomm\QFIL\
02:47:51: INFO: Showing network mappings to allow debugging
02:47:51: INFO:
02:47:51: INFO: Trying to store 'rawprogram0.xml' in string table
02:47:51: INFO: Looking for file 'rawprogram0.xml'
02:47:51: INFO: User wants to talk to port '\\.\COM4'
02:47:51: INFO: Took 0.00000000 seconds to open port
02:47:51: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
02:47:51: INFO: If you don't want this, use --dontsorttags
02:47:51: INFO: Looking for file 'gpt_main0.bin'
02:47:51: INFO: Looking for file 'gpt_backup0.bin'
02:47:51: INFO:
Total to be tansferd with <program> or <read> is 44.00 KB
02:47:51: INFO: Sending <configure>
02:47:51: INFO: TARGET SAID: 'Binary build date: Jan 2 2018 @ 13:14:45'
02:47:51: INFO: TARGET SAID: 'Chip serial num: 4294967295 (0xffffffff)'
02:47:51: INFO: TARGET SAID: 'Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke '
02:47:51: INFO: TARGET SAID: 'Calling usb_al_bulk_set_zlp_mode(TRUE) since ZlpAwareHost='1''
02:47:51: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
02:47:51: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
02:47:51: INFO: In handleProgram('gpt_main0.bin')
02:47:51: INFO: Looking for file 'gpt_main0.bin'
02:47:51: INFO: =======================================================
02:47:51: INFO: {<program> FILE: 'C:\Users\sacre\Downloads\G950U2\gpt_main0.bin'}
02:47:51: INFO: {<program> (24.00 KB) 6 sectors needed at location 0 on LUN 0}
02:47:51: INFO: =======================================================
02:47:51: INFO: TARGET SAID: 'ERROR: Failed to initialize (open whole lun) UFS Device slot 0 partition 0'
02:47:51: INFO: TARGET SAID: 'ERROR: ufs_open_error_code 0 :: 0x114'
02:47:51: INFO: TARGET SAID: 'ERROR: last ufs_open_error_code 16 :: 0x114'
02:47:51: INFO: TARGET SAID: 'ERROR: Failed to open the device 3 slot 0 partition 0'
02:47:51: INFO: TARGET SAID: 'INFO: Device type 3, slot 0, partition 0, error 0'
02:47:51: INFO: TARGET SAID: 'WARN: Get Info failed to open 3 slot 0, partition 0, error 0'
02:47:51: INFO: TARGET SAID: 'storage_device_get_num_partition_sectors FAILED!'
02:47:51: INFO: TARGET SAID: 'parseSectorValue could not handle start_sector value'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:47:51: {ERROR: program FAILED - Please see log}
Writing log to 'C:\Users\sacre\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\sacre\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Download Fail:FireHose Fail FHLoader Failrocess fail
Finish Download
Com4 is the port in use, but there's a weird com port callout at the very beginning there. Also noticed it changed the RawProgram and Patch from 3 to 0. Damn software. Damn phone.

Westen81 said:
So here is my log from the most recent attempt:
Validating Application Configuration
Load APP Configuration
COM:-1
SAHARA:True
SAHARA:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
SEARCHPATH:C:\Users\sacre\Downloads\G950U2
RAWPROGRAM:
rawprogram3.xml
PATCH:
patch3.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:UFS
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:True
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
PROVISIONPROGRAMMERPATH:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
PROVISIONXMLPATH:C:\Users\sacre\Downloads\G950U2\provision_samsung.xml
Load ARG Configuration
Validating Download Configuration
Image Search Path: C:\Users\sacre\Downloads\G950U2
RAWPROGRAM file path: C:\Users\sacre\Downloads\G950U2\rawprogram3.xml
PATCH file path:C:\Users\sacre\Downloads\G950U2\patch3.xml
Programmer Path:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
Process Index:0
Image Search Path: C:\Users\sacre\Downloads\G950U2
RAWPROGRAM file path: C:\Users\sacre\Downloads\G950U2\rawprogram0.xml
PATCH file path:C:\Users\sacre\Downloads\G950U2\patch0.xml
Start Download
Program Path:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.exe -p \\.\COM4 -s 13:C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf 'Current working dir: C:\Users\sacre\AppData\Roaming\Qualcomm\QFIL
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf
02:47:47: Requested ID 13, file: "C:\Users\sacre\Downloads\G950U2\prog_ufs_firehose_8998_ddr.elf"
02:47:47: 600504 bytes transferred in 0.172000 seconds (3.3296MBps)
02:47:47: File transferred successfully
02:47:47: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:UFS
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
Binary build date: Jun 3 2015 @ 17:12:06
Build version: 15.06. 3.17.12.06
02:47:51: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=C:\Users\sacre\Downloads\G950U2 --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=UFS
************************************************
02:47:51: INFO: Current working dir (cwd): C:\Users\sacre\AppData\Roaming\Qualcomm\QFIL\
02:47:51: INFO: Showing network mappings to allow debugging
02:47:51: INFO:
02:47:51: INFO: Trying to store 'rawprogram0.xml' in string table
02:47:51: INFO: Looking for file 'rawprogram0.xml'
02:47:51: INFO: User wants to talk to port '\\.\COM4'
02:47:51: INFO: Took 0.00000000 seconds to open port
02:47:51: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
02:47:51: INFO: If you don't want this, use --dontsorttags
02:47:51: INFO: Looking for file 'gpt_main0.bin'
02:47:51: INFO: Looking for file 'gpt_backup0.bin'
02:47:51: INFO:
Total to be tansferd with <program> or <read> is 44.00 KB
02:47:51: INFO: Sending <configure>
02:47:51: INFO: TARGET SAID: 'Binary build date: Jan 2 2018 @ 13:14:45'
02:47:51: INFO: TARGET SAID: 'Chip serial num: 4294967295 (0xffffffff)'
02:47:51: INFO: TARGET SAID: 'Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke '
02:47:51: INFO: TARGET SAID: 'Calling usb_al_bulk_set_zlp_mode(TRUE) since ZlpAwareHost='1''
02:47:51: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
02:47:51: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
02:47:51: INFO: In handleProgram('gpt_main0.bin')
02:47:51: INFO: Looking for file 'gpt_main0.bin'
02:47:51: INFO: =======================================================
02:47:51: INFO: {<program> FILE: 'C:\Users\sacre\Downloads\G950U2\gpt_main0.bin'}
02:47:51: INFO: {<program> (24.00 KB) 6 sectors needed at location 0 on LUN 0}
02:47:51: INFO: =======================================================
02:47:51: INFO: TARGET SAID: 'ERROR: Failed to initialize (open whole lun) UFS Device slot 0 partition 0'
02:47:51: INFO: TARGET SAID: 'ERROR: ufs_open_error_code 0 :: 0x114'
02:47:51: INFO: TARGET SAID: 'ERROR: last ufs_open_error_code 16 :: 0x114'
02:47:51: INFO: TARGET SAID: 'ERROR: Failed to open the device 3 slot 0 partition 0'
02:47:51: INFO: TARGET SAID: 'INFO: Device type 3, slot 0, partition 0, error 0'
02:47:51: INFO: TARGET SAID: 'WARN: Get Info failed to open 3 slot 0, partition 0, error 0'
02:47:51: INFO: TARGET SAID: 'storage_device_get_num_partition_sectors FAILED!'
02:47:51: INFO: TARGET SAID: 'parseSectorValue could not handle start_sector value'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:47:51: {ERROR: program FAILED - Please see log}
Writing log to 'C:\Users\sacre\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\sacre\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Download Fail:FireHose Fail FHLoader Failrocess fail
Finish Download
Com4 is the port in use, but there's a weird com port callout at the very beginning there. Also noticed it changed the RawProgram and Patch from 3 to 0. Damn software. Damn phone.
Click to expand...
Click to collapse
Yea that's a lot different than what mine did. You are making it a lot farther. In qfil.
Like it's conflicting with it self. Hmmmmm. I show shoot. Few PM's this afternoon and see if any one can shed light on this one

TheMadScientist said:
Yea that's a lot different than what mine did. You are making it a lot farther. In qfil.
Like it's conflicting with it self. Hmmmmm. I show shoot. Few PM's this afternoon and see if any one can shed light on this one
Click to expand...
Click to collapse
W3RD. I even tweaked the port configuration settings in Windows for the 9008, as far as stop bits. left flow control off, set baud at 14.4 . If nobody has an epiphany between now and when I get off work, I'm gonna call it and tell the wife we're going to T-Mobile.

TheMadScientist said:
Ok guys I got the go ahead I have the edl files I can help you guys possibly these are not my work but we can make a telegram chat and we can see if we can get some life back to you guys:good::good::good:
Click to expand...
Click to collapse
Did you end up getting this figured out? I have 2 s8 G950u that have black screens after attempting to unlock with octoplus pro box. Any help would be appreciated.

amourer2 said:
Did you end up getting this figured out? I have 2 s8 G950u that have black screens after attempting to unlock with octoplus pro box. Any help would be appreciated.
Click to expand...
Click to collapse
hollar at me on hangouts and I can live chat you
https://hangouts.google.com/group/JyLSy4hFLPwGYx9g1
I will be on for the next few hours but you can hollar anytime ill respond back once i see it

I would love to get ahold of this S8 EDL fix if someone can part with the files. If you want them private I will keep them private. Trying to help someone with their bricked S8. Not my first EDL 9008 recovery but will be my first S8 so I can definitely use the practice. I could trade a carrier unlock or frp unlock job for the files if they are all intact and are for sure working. I have a few boxes I use for my phone repair work too.

Hi pros
I'm in kind of a similar situation....I think I flashed MY 950U PIE with wrong BL
This phone is dead....Doesn't boot...no download mode....No recovery mode....
When connected to pc....device manager Recognises device as QUALCOMM HS USB 9008
Any way to brig it back to life...?
Im a newbie in flashing if anybody has a solution.....step by step process will be hoghly appropriated

Help! Trying to unbrick my Leeco Le Pro 3 with flashone and getting this error.

04:18:53: INFO: TARGET SAID: 'Storage device of type 'UFS' cannot be opened'
04:18:53: INFO: TARGET SAID: 'storage_device_open() returned FALSE'
04:18:53: INFO: TARGET SAID: 'ERROR 13: Line 1142: HANDLE_CONFIGURE_FAILURE'
04:18:53: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 49152
04:18:53: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
04:18:53: INFO: Something failed. The target rejected your <configure>. Please inspect log for more information

I can't flash anything in qfil and qgdp

my phone stuck in corrupted recovery mode but i can still access edl mode. i can't flash another custom recovery and can't flash stock rom too, it always says:
Validating Application Configuration
Load APP Configuration
COM:4
PBLDOWNLOADPROTOCOL:0
PROGRAMMER:True
PROGRAMMER:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn
RESETSAHARASTATEEMACHINE:False
SEARCHPATH:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
AUTOPRESERVEPARTITIONS:False
PARTITIONPRESERVEMODE:0
PRESERVEDPARTITIONS:0
PRESERVEDPARTITIONS:
ERASEALL:False
Load ARG Configuration
Validating Download Configuration
Image Search Path: E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp
RAWPROGRAM file path: E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\rawprogram0.xml
PATCH file path:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\patch0.xml
Programmer Path:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn
Process Index:0
Start Download
Program Path:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn
***** Working Folder:C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.exe -u 4 -s 13:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn 'Current working dir: C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
***** Working Folder:C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
Binary build date: Jun 3 2015 @ 17:12:06
Build version: 15.06. 3.17.12.06
02:49:12: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=emmc
************************************************
02:49:12: INFO: Current working dir (cwd): C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4\
02:49:12: INFO: Showing network mappings to allow debugging
02:49:12: INFO:
02:49:12: INFO: Trying to store 'rawprogram0.xml' in string table
02:49:12: INFO: Looking for file 'rawprogram0.xml'
02:49:12: INFO: User wants to talk to port '\\.\COM4'
02:49:12: INFO: Took 0.01500000 seconds to open port
02:49:12: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
02:49:12: INFO: If you don't want this, use --dontsorttags
02:49:12: INFO: Looking for file 'recovery.img'
02:49:12: INFO: Looking for file 'boot.img'
02:49:12: INFO:
Total to be tansferd with <program> or <read> is 35.30 MB
02:49:12: INFO: Sending <configure>
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:49:12: {ERROR: XML not formed correctly. Expected a < character at loc 0}
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:49:12: {ERROR: 3. TAG not found or recognized}
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:49:12: {ERROR:
There is a chance your target is in SAHARA mode!!
There is a chance your target is in SAHARA mode!!
There is a chance your target is in SAHARA mode!!
This can mean
1. You forgot to send DeviceProgrammer first (i.e. QSaharaServer.exe -s 13rog_emmc_firehose_8994_lite.mbn)
2. OR, you did send DeviceProgrammer, but it has crashed and/or is not correct for this target
Regardless this program speaks FIREHOSE protocol and your target is speaking SAHARA protcol, so this will not work
}
Writing log to 'C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4\port_trace.txt', might take a minute
Log is 'C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4\port_trace.txt'
Download Fail:FireHose Fail:FHLoader Failrocess fail
Finish Download

aidenskcyu said:
my phone stuck in corrupted recovery mode but i can still access edl mode. i can't flash another custom recovery and can't flash stock rom too, it always says:
Validating Application Configuration
Load APP Configuration
COM:4
PBLDOWNLOADPROTOCOL:0
PROGRAMMER:True
PROGRAMMER:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn
RESETSAHARASTATEEMACHINE:False
SEARCHPATH:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
AUTOPRESERVEPARTITIONS:False
PARTITIONPRESERVEMODE:0
PRESERVEDPARTITIONS:0
PRESERVEDPARTITIONS:
ERASEALL:False
Load ARG Configuration
Validating Download Configuration
Image Search Path: E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp
RAWPROGRAM file path: E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\rawprogram0.xml
PATCH file path:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\patch0.xml
Programmer Path:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn
Process Index:0
Start Download
Program Path:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn
***** Working Folder:C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.exe -u 4 -s 13:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn 'Current working dir: C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
***** Working Folder:C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
Binary build date: Jun 3 2015 @ 17:12:06
Build version: 15.06. 3.17.12.06
02:49:12: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=emmc
************************************************
02:49:12: INFO: Current working dir (cwd): C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4\
02:49:12: INFO: Showing network mappings to allow debugging
02:49:12: INFO:
02:49:12: INFO: Trying to store 'rawprogram0.xml' in string table
02:49:12: INFO: Looking for file 'rawprogram0.xml'
02:49:12: INFO: User wants to talk to port '\\.\COM4'
02:49:12: INFO: Took 0.01500000 seconds to open port
02:49:12: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
02:49:12: INFO: If you don't want this, use --dontsorttags
02:49:12: INFO: Looking for file 'recovery.img'
02:49:12: INFO: Looking for file 'boot.img'
02:49:12: INFO:
Total to be tansferd with <program> or <read> is 35.30 MB
02:49:12: INFO: Sending <configure>
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:49:12: {ERROR: XML not formed correctly. Expected a < character at loc 0}
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:49:12: {ERROR: 3. TAG not found or recognized}
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:49:12: {ERROR:
There is a chance your target is in SAHARA mode!!
There is a chance your target is in SAHARA mode!!
There is a chance your target is in SAHARA mode!!
This can mean
1. You forgot to send DeviceProgrammer first (i.e. QSaharaServer.exe -s 13rog_emmc_firehose_8994_lite.mbn)
2. OR, you did send DeviceProgrammer, but it has crashed and/or is not correct for this target
Regardless this program speaks FIREHOSE protocol and your target is speaking SAHARA protcol, so this will not work
}
Writing log to 'C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4\port_trace.txt', might take a minute
Log is 'C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4\port_trace.txt'
Download Fail:FireHose Fail:FHLoader Failrocess fail
Finish Download
Click to expand...
Click to collapse
Since EDL mode is still accessible, try flashing EUI from MiFlash tool (EUI5.9 ZAXCNFN5902606201S can be flashed from this tool ) and get your device back up running.

nml_krishna said:
Since EDL mode is still accessible, try flashing EUI from MiFlash tool (EUI5.9 ZAXCNFN5902606201S can be flashed from this tool ) and get your device back up running.
Click to expand...
Click to collapse
hey thanks! can you give me some link to this EUI5.9 ZAXCNFN5902606201S rom? i can't find the right rom for miflash
edit: thanks dude it works! but the problem now is how can i flash twrp because it still giving same error in qfil

aidenskcyu said:
hey thanks! can you give me some link to this EUI5.9 ZAXCNFN5902606201S rom? i can't find the right rom for miflash
edit: thanks dude it works! but the problem now is how can i flash twrp because it still giving same error in qfil
Click to expand...
Click to collapse
Try Flashing the same EUI twrp through MiFlash tool.
Open MiFlash and browse to twrp folder in EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92 and connect device in EDL mode.
Once you see the device in MiFlash tool, click on Flash ( leave the flash all except storage checked ).
After flash is complete keep holding power + vol up button for twrp recovery. Hopefully this should fix corrupted twrp.
OR
If you have stock rom CPB file flashed through YGDP tool, follow below procedure to flash it through MiFlash
- Extract CPB file contents using CPB unpacker.
- Rename prog_emmc_firehose.mbn to prog_emmc_firehose_8976_ddr.mbn under the CPB extracted files
- Open MiFlash tool, browse to the CPB extracted folder.
- Connect device in EDL mode
- Click on Flash
Once the flash is complete, device should be able to boot to stock rom.

Unable to flash Stock Rom

I was on oxygen os port
after 6th or 7 day it suddenly goes off
and never boot again
i was able to boot in fastboot but not a
single command worked
so i fire up QFIL and try to flash
stock rom but nothing worked
finlly i click [erase all before download]
now i cANT boot in to faSR BOOT and
unable to flash stock rom by qfil
help me

QFIL log
Start Download
Program Path:\repair\HARD BRICK\[firmware27]ZB630KL_ZQL1820_Factory_201812071630_ChangeFlash\prog_emmc_ufs_firehose_Sdm660_ddr.elf
***** Working Folder:C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22
Binary build date: Oct 31 2016 @ 22:51:05
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files\Qualcomm\QPST\bin\QSaharaServer.ex'Current working dir: C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: D:\repair\HARD BRICK\[firmware27]ZB630KL_ZQL1820_Factory_201812071630_ChangeFlash\prog_emmc_ufs_firehose_Sdm660_ddr.elf
19:27:15: Requested ID 13, file: "D:\repair\HARD BRICK\[firmware27]ZB630KL_ZQL1820_Factory_201812071630_ChangeFlash\prog_emmc_ufs_firehose_Sdm660_ddr.elf"
19:27:16: 624548 bytes transferred in 0.219000 seconds (2.7197MBps)
19:27:16: File transferred successfully
19:27:16: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:UFS
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:True
Use Verbose:True
***** Working Folder:C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22
Base Version: 16.10.28.15.28
Binary build date: Oct 31 2016 @ 22:51:02
Incremental Build version: 16.10.31.22.51.02
19:27:19: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM22 --erase=0 --noprompt --showpercentagecomplete --testvipimpact --verbose --zlpawarehost=1 --memoryname=ufs
************************************************
19:27:19: INFO: Current working dir (cwd): C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22\
19:27:19: INFO: Showing network mappings to allow debugging
19:27:19: INFO: User wants to talk to port '\\.\COM22'
19:27:19: INFO: Took 0.00000000 seconds to open port
19:27:19: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
19:27:19: INFO: If you don't want this, use --dontsorttags
19:27:19: INFO: Sending <configure>
19:27:19: INFO: TARGET SAID: 'Binary build date: Dec 7 2018 @ 17:09:09'
19:27:19: INFO: TARGET SAID: 'Chip serial num: 4294438911 (0xfff7efff)'
19:27:19: INFO: TARGET SAID: 'Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase '
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 17 ('AlwaysValidate') with value '1' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 2 ('MaxDigestTableSizeInBytes') with value '8192' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 1 ('MaxPayloadSizeToTargetInBytes') with value '1048576' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 14 ('ZlpAwareHost') with value '1' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 23 ('SkipStorageInit') with value '0' type is 'i''
19:27:19: INFO: TARGET SAID: 'Calling usb_al_bulk_set_zlp_mode(TRUE) since ZlpAwareHost='1''
19:27:19: INFO: TARGET SAID: 'Calling storage_device_open(0x2) - If this hangs use SkipStorageInit='1' for configure'
19:27:19: INFO: TARGET SAID: 'memory_name set to 'UFS' and fh.sector_size = 4096'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'MinVersionSupported' with value '1'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'MaxXMLSizeInBytes' with value '4096'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'Version' with value '1'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'DateTime' with value 'Dec 7 2018 - 17:09:09'
19:27:19: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
19:27:19: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
19:27:19: INFO: Issuing Erase
19:27:19: INFO: _____ _ _____
19:27:19: INFO: |_ _| (_) | ___|
19:27:19: INFO: | | ___ ___ _ _ _ _ __ __ _ | |__ _ __ __ _ ___ ___
19:27:19: INFO: | |/ __/ __| | | | | '_ \ / _` | | __| '__/ _` / __|/ _ \
19:27:19: INFO: _| |\__ \__ \ |_| | | | | | (_| | | |__| | | (_| \__ \ __/
19:27:19: INFO: \___/___/___/\__,_|_|_| |_|\__, | \____/_| \__,_|___/\___|
19:27:19: INFO: __/ |
19:27:19: INFO: |___/
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 8 ('SECTOR_SIZE_IN_BYTES') with value '512' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 10 ('physical_partition_number') with value '0' type is 'i''
19:27:19: INFO: TARGET SAID: 'Calling storage_device_erase(0)'
19:27:19: INFO: TARGET SAID: 'In handleErase Calling storage_device_erase()'
19:27:19: INFO: TARGET SAID: 'Did not specify start/size, format whole device'
19:27:19: INFO: TARGET SAID: 'ERROR: Failed to initialize (open whole lun) UFS Device slot 0 partition 0'
19:27:19: INFO: TARGET SAID: 'ERROR: Failed to open the device 3 slot 0 partition 0'
19:27:19: INFO: TARGET SAID: 'INFO: Device type 3, slot 0, partition 0, error -528043608'
19:27:19: INFO: TARGET SAID: 'WARN: Format failed to open 3 slot 0, partition 0, error -528043608'
19:27:19: INFO: TARGET SAID: 'storage_device_format returned FALSE'
19:27:19: INFO: TARGET SAID: 'ERROR 17: Line 1607: HANDLE_ERASE_FAILURE'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
19:27:19: {ERROR: Something failed with the <erase> command. The port_trace.txt can shed more information on this
Note that for eMMC <erase> is only valid for physical_partition 0. For UFS <erase> is valid for all LUNs
}
Writing log to 'C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22\port_trace.txt', might take a minute
Log is 'C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22\port_trace.txt'
Download Fail:FireHose Fail:FireHose Fail:FHLoader Failrocess fail
Finish Download

Failed to write error
I aslo did the same thing. selected erase all before download. Now getting failed to write ( Sahara firehose error)
Have you find solution for this @Neo neer

Neo neer said:
Start Download
Program Path:\repair\HARD BRICK\[firmware27]ZB630KL_ZQL1820_Factory_201812071630_ChangeFlash\prog_emmc_ufs_firehose_Sdm660_ddr.elf
***** Working Folder:C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22
Binary build date: Oct 31 2016 @ 22:51:05
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files\Qualcomm\QPST\bin\QSaharaServer.ex'Current working dir: C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: D:\repair\HARD BRICK\[firmware27]ZB630KL_ZQL1820_Factory_201812071630_ChangeFlash\prog_emmc_ufs_firehose_Sdm660_ddr.elf
19:27:15: Requested ID 13, file: "D:\repair\HARD BRICK\[firmware27]ZB630KL_ZQL1820_Factory_201812071630_ChangeFlash\prog_emmc_ufs_firehose_Sdm660_ddr.elf"
19:27:16: 624548 bytes transferred in 0.219000 seconds (2.7197MBps)
19:27:16: File transferred successfully
19:27:16: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:UFS
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:True
Use Verbose:True
***** Working Folder:C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22
Base Version: 16.10.28.15.28
Binary build date: Oct 31 2016 @ 22:51:02
Incremental Build version: 16.10.31.22.51.02
19:27:19: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM22 --erase=0 --noprompt --showpercentagecomplete --testvipimpact --verbose --zlpawarehost=1 --memoryname=ufs
************************************************
19:27:19: INFO: Current working dir (cwd): C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22\
19:27:19: INFO: Showing network mappings to allow debugging
19:27:19: INFO: User wants to talk to port '\\.\COM22'
19:27:19: INFO: Took 0.00000000 seconds to open port
19:27:19: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
19:27:19: INFO: If you don't want this, use --dontsorttags
19:27:19: INFO: Sending <configure>
19:27:19: INFO: TARGET SAID: 'Binary build date: Dec 7 2018 @ 17:09:09'
19:27:19: INFO: TARGET SAID: 'Chip serial num: 4294438911 (0xfff7efff)'
19:27:19: INFO: TARGET SAID: 'Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase '
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 17 ('AlwaysValidate') with value '1' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 2 ('MaxDigestTableSizeInBytes') with value '8192' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 1 ('MaxPayloadSizeToTargetInBytes') with value '1048576' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 14 ('ZlpAwareHost') with value '1' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 23 ('SkipStorageInit') with value '0' type is 'i''
19:27:19: INFO: TARGET SAID: 'Calling usb_al_bulk_set_zlp_mode(TRUE) since ZlpAwareHost='1''
19:27:19: INFO: TARGET SAID: 'Calling storage_device_open(0x2) - If this hangs use SkipStorageInit='1' for configure'
19:27:19: INFO: TARGET SAID: 'memory_name set to 'UFS' and fh.sector_size = 4096'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'MinVersionSupported' with value '1'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'MaxXMLSizeInBytes' with value '4096'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'Version' with value '1'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'DateTime' with value 'Dec 7 2018 - 17:09:09'
19:27:19: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
19:27:19: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
19:27:19: INFO: Issuing Erase
19:27:19: INFO: _____ _ _____
19:27:19: INFO: |_ _| (_) | ___|
19:27:19: INFO: | | ___ ___ _ _ _ _ __ __ _ | |__ _ __ __ _ ___ ___
19:27:19: INFO: | |/ __/ __| | | | | '_ \ / _` | | __| '__/ _` / __|/ _ \
19:27:19: INFO: _| |\__ \__ \ |_| | | | | | (_| | | |__| | | (_| \__ \ __/
19:27:19: INFO: \___/___/___/\__,_|_|_| |_|\__, | \____/_| \__,_|___/\___|
19:27:19: INFO: __/ |
19:27:19: INFO: |___/
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 8 ('SECTOR_SIZE_IN_BYTES') with value '512' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 10 ('physical_partition_number') with value '0' type is 'i''
19:27:19: INFO: TARGET SAID: 'Calling storage_device_erase(0)'
19:27:19: INFO: TARGET SAID: 'In handleErase Calling storage_device_erase()'
19:27:19: INFO: TARGET SAID: 'Did not specify start/size, format whole device'
19:27:19: INFO: TARGET SAID: 'ERROR: Failed to initialize (open whole lun) UFS Device slot 0 partition 0'
19:27:19: INFO: TARGET SAID: 'ERROR: Failed to open the device 3 slot 0 partition 0'
19:27:19: INFO: TARGET SAID: 'INFO: Device type 3, slot 0, partition 0, error -528043608'
19:27:19: INFO: TARGET SAID: 'WARN: Format failed to open 3 slot 0, partition 0, error -528043608'
19:27:19: INFO: TARGET SAID: 'storage_device_format returned FALSE'
19:27:19: INFO: TARGET SAID: 'ERROR 17: Line 1607: HANDLE_ERASE_FAILURE'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
19:27:19: {ERROR: Something failed with the <erase> command. The port_trace.txt can shed more information on this
Note that for eMMC <erase> is only valid for physical_partition 0. For UFS <erase> is valid for all LUNs
}
Writing log to 'C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22\port_trace.txt', might take a minute
Log is 'C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22\port_trace.txt'
Download Fail:FireHose Fail:FireHose Fail:FHLoader Failrocess fail
Finish Download
Click to expand...
Click to collapse
So, basicially did it work for you??? @Neo neer

some how Emmc write protection is enabled
thriloksaiy said:
I aslo did the same thing. selected erase all before download. Now getting failed to write ( Sahara firehose error)
Have you find solution for this @Neo neer
Click to expand...
Click to collapse
i don't know how but
emmc write protention is enabled and there is
only two ways
1) change the motherbord
2) take out storage and reformat it using UFI box and solder again it on bord without damaging any part
i highly recomand visit any expert or go to service center
and my phone is still bricked
unable to go out due to lockdown

somehow EMMC write protection i enabled
kool.5 said:
So, basicially did it work for you??? @Neo neer
Click to expand...
Click to collapse
i don't know how but
emmc write protention is enabled and there is
only two ways
1) change the motherbord
2) take out storage and reformat it using UFI box and solder again it on bord without damaging any part
i highly recomand visit any expert or go to service center
and my phone is still bricked
unable to go out due to lockdown

Neo neer said:
i don't know how but
emmc write protention is enabled and there is
only two ways
1) change the motherbord
2) take out storage and reformat it using UFI box and solder again it on bord without damaging any part
i highly recomand visit any expert or go to service center
and my phone is still bricked
unable to go out due to lockdown
Click to expand...
Click to collapse
Okay, thanks for the heads-up.

[Help][Urgent] Oppo A37f qdloader 9008 [Edited Linux Test]

Hello first,
i got my friend's Oppo A37f phone just jumped into qdloader while trying to factory reset.
Now:
i cannot flash full stock even using: EMMC Cracked, Qfil, MSM Download Tool, UniTool Cracked, Miracel Thunder Cracked, EMMCDL.EXE.... i know just jumped over there gives high possibility its hardware/emmc problem but:
each firmware for the phone gives different error, each software i've used to flash firmwares gives different error too...
best points I've reached is QFIL error that gives it took
1- (eg 15 seconds to open port which is longer than 3.000) sometimes it reaches 180 second with different firmware, line ends with FIREHOSEFAIL
2- it almost goes to flash but then fails (your device probably not in that port)
all fails are kinda around Firehose fail, DA Unrecognized, waiting for programmer to boot but never happens...
so im kinda asking, since all firmware's downloaded had 8936 firehose and the phone is 8916 is it possible all firmwares aren't for this phone?
does anyone have Firehose8916 that actually worked on that model (Oppo A37F)
here is some logs from tries via qfil
Spoiler
Process Index:0
Programmer Path:E:\old\ungames\A37fEX_11_A.38_190711\A37fEX_11_A.38_190711\prog_emmc_firehose_8936.mbn
Image Search Path:E:\old\ungames\A37fEX_11_A.38_190711\A37fEX_11_A.38_190711
Please select the XML file
Start Download
Program Path:E:\old\ungames\A37fEX_11_A.38_190711\A37fEX_11_A.38_190711\prog_emmc_firehose_8936.mbn
COM Port number:23
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Sending Programmer Finished
Switch To FireHose
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Ack Raw Data:False
Skip Write:False
Always Validate:False
Use Verbose:False
COM Port number:23
Sending NOP
NOP: Fail Code: 9
Unable to send FireHose NOP, Device is not in Firehose mode !
Download Fail:System.Exception: Failed to send Firehose NOP to the phone.
at QC.QMSLPhone.Phone.QPHONEMS_FireHoseNOP()
at QC.SwDownloadDLL.SwDownload.FireHoseDownloadImage(Boolean bResetPhone, List`1 rawprogramFilesList, List`1 patchFilesList, Single& fImageSizeInMB, Single& fThroughput)
Download Fail:FireHose Fail FireHose Fail
Finish Download
Spoiler
2021-03-22 03:15:15.607 Start Download
2021-03-22 03:15:15.607 Program Path:E:\old\ungames\A37fEX_11_A.38_190711\A37fEX_11_A.38_190711\prog_emmc_firehose_8936.mbn
2021-03-22 03:15:15.607 ***** Working Folder:C:\Users\Bone Crusher\AppData\Roaming\Qualcomm\QFIL\COMPORT_23
2021-03-22 03:15:15.669 Binary build date: Jun 25 2019 @ 03:16:15
2021-03-22 03:15:15.669 QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.ex'Current working dir: C:\Users\Bone Crusher\AppData\Roaming\Qualcomm\QFIL\COMPORT_23
2021-03-22 03:15:15.669 Sahara mappings:
2021-03-22 03:15:15.669 2: amss.mbn
2021-03-22 03:15:15.669 6: apps.mbn
2021-03-22 03:15:15.669 8: dsp1.mbn
2021-03-22 03:15:15.669 10: dbl.mbn
2021-03-22 03:15:15.669 11: osbl.mbn
2021-03-22 03:15:15.669 12: dsp2.mbn
2021-03-22 03:15:15.685 16: efs1.mbn
2021-03-22 03:15:15.685 17: efs2.mbn
2021-03-22 03:15:15.685 20: efs3.mbn
2021-03-22 03:15:15.685 21: sbl1.mbn
2021-03-22 03:15:15.685 22: sbl2.mbn
2021-03-22 03:15:15.685 23: rpm.mbn
2021-03-22 03:15:15.685 25: tz.mbn
2021-03-22 03:15:15.685 28: dsp3.mbn
2021-03-22 03:15:15.685 29: acdb.mbn
2021-03-22 03:15:15.685 30: wdt.mbn
2021-03-22 03:15:15.685 31: mba.mbn
2021-03-22 03:15:15.685 13: E:\old\ungames\A37fEX_11_A.38_190711\A37fEX_11_A.38_190711\prog_emmc_firehose_8936.mbn
2021-03-22 03:15:15.685
2021-03-22 03:15:15.685 03:15:15: Requested ID 13, file: "E:\old\ungames\A37fEX_11_A.38_190711\A37fEX_11_A.38_190711\prog_emmc_firehose_8936.mbn"
2021-03-22 03:15:15.685
2021-03-22 03:15:15.685 03:15:15: 91624 bytes transferred in 0.047000 seconds (1.8591MBps)
2021-03-22 03:15:15.685
2021-03-22 03:15:15.685
2021-03-22 03:15:15.685
2021-03-22 03:15:15.685 03:15:15: File transferred successfully
2021-03-22 03:15:15.685
2021-03-22 03:15:15.685
2021-03-22 03:15:15.685 NOTE: Target requested image 13 which is DeviceProgrammer. Forcing QUIT. This is by design, ** All is well ** SUCCESS!!
2021-03-22 03:15:15.700
2021-03-22 03:15:15.700
2021-03-22 03:15:15.700 03:15:15: Sahara protocol completed
2021-03-22 03:15:15.700 Sending Programmer Finished
2021-03-22 03:15:15.700 Switch To FireHose
2021-03-22 03:15:15.700 Wait for 3 seconds...
2021-03-22 03:15:18.711 Max Payload Size to Target:49152 Bytes
2021-03-22 03:15:18.711 Active Boot Partition:0
2021-03-22 03:15:18.711 Device Type:emmc
2021-03-22 03:15:18.711 Platform:8x26
2021-03-22 03:15:18.711 Disable Ack Raw Data Every N Packets
2021-03-22 03:15:18.711 Skip Write:False
2021-03-22 03:15:18.711 Always Validate:False
2021-03-22 03:15:18.711 Use Verbose:False
2021-03-22 03:15:18.711 ***** Working Folder:C:\Users\Bone Crusher\AppData\Roaming\Qualcomm\QFIL\COMPORT_23
2021-03-22 03:15:26.137
2021-03-22 03:15:26.137 Base Version: 19.06.10.18.44
2021-03-22 03:15:26.137 Binary build date: Jun 25 2019 @ 03:16:10
2021-03-22 03:15:26.137 Incremental Build version: 19.06.25.03.16.10
2021-03-22 03:15:26.137
2021-03-22 03:15:26.137 03:15:18: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
2021-03-22 03:15:26.137 ************************************************
2021-03-22 03:15:26.152 C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM23 --sendxml=rawprogram0_MSM_15399.xml --search_path=E:\old\ungames\A37fEX_11_A.38_190711\A37fEX_11_A.38_190711 --noprompt --showpercentagecomplete --zlpawarehost=1 --verify_programming --memoryname=emmc
2021-03-22 03:15:26.152 ************************************************
2021-03-22 03:15:26.152
2021-03-22 03:15:26.152 03:15:18: INFO: Current working dir (cwd): C:\Users\Bone Crusher\AppData\Roaming\Qualcomm\QFIL\COMPORT_23\
2021-03-22 03:15:26.152 03:15:18: INFO: Showing network mappings to allow debugging
2021-03-22 03:15:26.152 03:15:18: INFO:
2021-03-22 03:15:26.152
2021-03-22 03:15:26.152
2021-03-22 03:15:26.152
2021-03-22 03:15:26.152 03:15:18: INFO: Trying to store 'rawprogram0_MSM_15399.xml' in string table
2021-03-22 03:15:26.152 03:15:18: INFO: Looking for file 'rawprogram0_MSM_15399.xml'
2021-03-22 03:15:26.152 03:15:18: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.152 03:15:18: INFO: Reading through sparse file 'system.img' and pulling out relevant header information...
2021-03-22 03:15:26.152 03:15:25: INFO: File system.img is a sparse file, being split up into 46 separate XML tags
2021-03-22 03:15:26.152 03:15:25: INFO: Looking for file 'cache.img'
2021-03-22 03:15:26.152 03:15:25: INFO: Reading through sparse file 'cache.img' and pulling out relevant header information...
2021-03-22 03:15:26.152 03:15:25: INFO: File cache.img is a sparse file, being split up into 1 separate XML tags
2021-03-22 03:15:26.152 03:15:25: INFO: Looking for file 'persist.img'
2021-03-22 03:15:26.168 03:15:25: INFO: Reading through sparse file 'persist.img' and pulling out relevant header information...
2021-03-22 03:15:26.168 03:15:25: INFO: File persist.img is a sparse file, being split up into 1 separate XML tags
2021-03-22 03:15:26.168 03:15:25: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.168 03:15:25: INFO: Reading through sparse file 'userdata.img' and pulling out relevant header information...
2021-03-22 03:15:26.168 03:15:26: INFO: File userdata.img is a sparse file, being split up into 95 separate XML tags
2021-03-22 03:15:26.168 03:15:26: INFO: User wants to talk to port '\\.\COM23'
2021-03-22 03:15:26.168 03:15:26: INFO: Took 0.00000000 seconds to open port
2021-03-22 03:15:26.168 03:15:26: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
2021-03-22 03:15:26.168 03:15:26: INFO: Looking for file 'NON-HLOS.bin'
2021-03-22 03:15:26.168 03:15:26: INFO: Looking for file 'ddr.img'
2021-03-22 03:15:26.168 03:15:26: INFO: Looking for file 'sec.dat'
2021-03-22 03:15:26.168 03:15:26: INFO: Looking for file 'sbl1.mbn'
2021-03-22 03:15:26.168 03:15:26: INFO: Looking for file 'sbl1.mbn'
2021-03-22 03:15:26.168 03:15:26: INFO: Looking for file 'emmc_appsboot.mbn'
2021-03-22 03:15:26.168 03:15:26: INFO: Looking for file 'emmc_appsboot.mbn'
2021-03-22 03:15:26.168 03:15:26: INFO: Looking for file 'rpm.mbn'
2021-03-22 03:15:26.168 03:15:26: INFO: Looking for file 'rpm.mbn'
2021-03-22 03:15:26.168 03:15:26: INFO: Looking for file 'tz.mbn'
2021-03-22 03:15:26.168 03:15:26: INFO: Looking for file 'tz.mbn'
2021-03-22 03:15:26.168 03:15:26: INFO: Looking for file 'hyp.mbn'
2021-03-22 03:15:26.168 03:15:26: INFO: Looking for file 'hyp.mbn'
2021-03-22 03:15:26.168 03:15:26: INFO: Looking for file 'dynamic_nvbk.bin'
2021-03-22 03:15:26.168 03:15:26: INFO: Looking for file 'static_nvbk.bin'
2021-03-22 03:15:26.184 03:15:26: INFO: Looking for file 'logo.bin'
2021-03-22 03:15:26.184 03:15:26: INFO: Looking for file 'boot.img'
2021-03-22 03:15:26.184 03:15:26: INFO: Looking for file 'recovery.img'
2021-03-22 03:15:26.184 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.184 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.184 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.184 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.184 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.184 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.184 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.184 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.184 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.184 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.184 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.184 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.184 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.184 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.184 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.184 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.184 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.184 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.184 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.184 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.184 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.184 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.184 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.184 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.184 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.199 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.199 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.199 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.199 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.199 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.199 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.199 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.199 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.199 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.199 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.199 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.199 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.199 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.199 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.199 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.199 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.199 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.199 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.199 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.199 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.199 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.199 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.199 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.199 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.199 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.199 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.199 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.199 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.199 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.199 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.199 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.199 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.199 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.199 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.215 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.215 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.215 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.215 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.215 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.215 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.215 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.215 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.215 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.215 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.215 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.215 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.215 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.215 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.215 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.215 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.215 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.215 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.215 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.215 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.215 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.215 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.215 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.215 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.215 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.215 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.215 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.230 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.230 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.230 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.230 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.230 03:15:26: INFO: system.img is a sparse image
2021-03-22 03:15:26.230 03:15:26: INFO: Looking for file 'system.img'
2021-03-22 03:15:26.230 03:15:26: INFO: cache.img is a sparse image
2021-03-22 03:15:26.230 03:15:26: INFO: Looking for file 'cache.img'
2021-03-22 03:15:26.230 03:15:26: INFO: persist.img is a sparse image
2021-03-22 03:15:26.230 03:15:26: INFO: Looking for file 'persist.img'
2021-03-22 03:15:26.230 03:15:26: INFO: Looking for file 'DRIVER.ISO'
2021-03-22 03:15:26.230 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.230 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.230 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.230 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.230 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.230 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.230 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.230 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.230 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.230 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.230 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.230 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.230 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.230 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.230 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.246 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.246 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.246 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.246 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.246 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.246 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.246 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.246 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.246 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.246 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.246 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.246 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.246 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.246 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.246 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.246 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.246 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.246 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.246 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.246 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.246 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.246 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.246 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.246 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.246 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.246 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.246 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.246 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.246 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.246 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.246 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.246 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.246 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.246 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.262 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.262 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.262 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.262 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.262 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.262 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.262 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.262 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.262 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.262 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.262 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.262 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.262 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.262 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.262 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.262 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.262 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.262 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.262 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.262 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.262 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.262 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.262 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.262 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.262 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.262 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.262 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.277 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.277 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.277 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.277 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.277 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.277 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.277 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.277 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.277 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.277 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.277 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.277 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.277 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.277 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.277 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.277 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.277 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.277 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.277 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.277 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.277 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.277 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.277 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.277 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.277 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.277 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.293 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.293 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.293 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.293 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.293 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.293 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.293 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.293 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.293 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.293 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.293 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.293 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.293 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.293 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.293 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.293 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.293 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.293 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.293 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.293 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.293 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.293 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.293 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.293 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.293 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.293 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.293 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.308 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.308 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.308 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.308 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.308 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.308 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.308 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.308 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.308 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.308 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.308 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.308 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.308 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.308 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.308 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.308 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.308 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.308 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.308 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.324 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.324 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.324 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.324 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.324 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.324 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.324 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.324 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.324 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.324 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.324 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.324 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.324 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.324 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.324 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.324 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.324 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.324 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.324 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.324 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.324 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.324 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.324 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.324 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.324 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.324 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.324 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.340 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.340 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.340 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.340 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.340 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.340 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.340 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.340 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.340 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.340 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.340 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.340 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.340 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.340 03:15:26: INFO: userdata.img is a sparse image
2021-03-22 03:15:26.340 03:15:26: INFO: Looking for file 'userdata.img'
2021-03-22 03:15:26.340 03:15:26: INFO: Looking for file 'gpt_main0_partition_MSM_15399.xml.bin'
2021-03-22 03:15:51.237 03:15:26: INFO: Looking for file 'gpt_backup0.bin'
2021-03-22 03:15:51.237 03:15:26: INFO:
2021-03-22 03:15:51.237
2021-03-22 03:15:51.237 Total to be tansferd with <program> or <read> is 5.79 GB
2021-03-22 03:15:51.237
2021-03-22 03:15:51.237
2021-03-22 03:15:51.237 03:15:26: INFO: Sending <configure>
2021-03-22 03:15:51.237
2021-03-22 03:15:51.237
2021-03-22 03:15:51.237 _____
2021-03-22 03:15:51.237 | ___|
2021-03-22 03:15:51.237 | |__ _ __ _ __ ___ _ __
2021-03-22 03:15:51.237 | __| '__| '__/ _ \| '__|
2021-03-22 03:15:51.237 | |__| | | | | (_) | |
2021-03-22 03:15:51.237 \____/_| |_| \___/|_|
2021-03-22 03:15:51.237
2021-03-22 03:15:51.237
2021-03-22 03:15:51.253 03:15:51: {ERROR: Could not write to '\\.\COM23', Windows API WriteFile failed! Your device is probably *not* on this port, attempted 100 times}
2021-03-22 03:15:51.253
2021-03-22 03:15:51.253 Writing log to 'C:\Users\Bone Crusher\AppData\Roaming\Qualcomm\QFIL\COMPORT_23\port_trace.txt', might take a minute
2021-03-22 03:15:51.253
2021-03-22 03:15:51.253
2021-03-22 03:15:51.253 Log is 'C:\Users\Bone Crusher\AppData\Roaming\Qualcomm\QFIL\COMPORT_23\port_trace.txt'
2021-03-22 03:15:51.253
2021-03-22 03:15:51.253 Download Fail:FireHose Fail:FHLoader Failrocess fail
2021-03-22 03:15:51.253 Finish Download
Spoiler
2021-03-22 03:06:56.689 Start Download
2021-03-22 03:06:56.689 Program Path:E:\old\ungames\aFull a37f\SMARTPHONES.HOW_MSM8916_64-USER_5.1.1_LMY47V_ENG.ROOT.20190711.032745_RELEASE-KEYS\prog_emmc_firehose_8936.mbn
2021-03-22 03:06:56.689 ***** Working Folder:C:\Users\Bone Crusher\AppData\Roaming\Qualcomm\QFIL\COMPORT_23
2021-03-22 03:08:26.717 Binary build date: Jun 25 2019 @ 03:16:15
2021-03-22 03:08:26.717 QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.ex'Current working dir: C:\Users\Bone Crusher\AppData\Roaming\Qualcomm\QFIL\COMPORT_23
2021-03-22 03:08:26.717 Sahara mappings:
2021-03-22 03:08:26.717 2: amss.mbn
2021-03-22 03:08:26.717 6: apps.mbn
2021-03-22 03:08:26.717 8: dsp1.mbn
2021-03-22 03:08:26.717 10: dbl.mbn
2021-03-22 03:08:26.717 11: osbl.mbn
2021-03-22 03:08:26.717 12: dsp2.mbn
2021-03-22 03:08:26.717 16: efs1.mbn
2021-03-22 03:08:26.717 17: efs2.mbn
2021-03-22 03:08:26.717 20: efs3.mbn
2021-03-22 03:08:26.717 21: sbl1.mbn
2021-03-22 03:08:26.717 22: sbl2.mbn
2021-03-22 03:08:26.717 23: rpm.mbn
2021-03-22 03:08:26.717 25: tz.mbn
2021-03-22 03:08:26.717 28: dsp3.mbn
2021-03-22 03:08:26.717 29: acdb.mbn
2021-03-22 03:08:26.717 30: wdt.mbn
2021-03-22 03:08:26.717 31: mba.mbn
2021-03-22 03:08:26.717 13: E:\old\ungames\aFull a37f\SMARTPHONES.HOW_MSM8916_64-USER_5.1.1_LMY47V_ENG.ROOT.20190711.032745_RELEASE-KEYS\prog_emmc_firehose_8936.mbn
2021-03-22 03:08:26.717
2021-03-22 03:08:26.717 03:08:26: ERROR: function: sahara_rx_data:276 Unable to read packet header. Only read 0 bytes.
2021-03-22 03:08:26.717
2021-03-22 03:08:26.717 03:08:26: ERROR: function: sahara_main:982 Sahara protocol error
2021-03-22 03:08:26.717
2021-03-22 03:08:26.717 03:08:26: ERROR: function: main:320 Uploading Image using Sahara protocol failed
2021-03-22 03:08:26.732
2021-03-22 03:08:26.732
2021-03-22 03:08:26.732 Download Fail:Sahara Fail:QSaharaServer Failrocess fail
2021-03-22 03:08:26.732 Finish Download
2021-03-22 03:09:48.429 Start Download
2021-03-22 03:09:48.429 Program Path:E:\old\ungames\aFull a37f\SMARTPHONES.HOW_MSM8916_64-USER_5.1.1_LMY47V_ENG.ROOT.20190711.032745_RELEASE-KEYS\prog_emmc_firehose_8936.mbn
2021-03-22 03:09:48.429 ***** Working Folder:C:\Users\Bone Crusher\AppData\Roaming\Qualcomm\QFIL\COMPORT_23
2021-03-22 03:09:48.507 Binary build date: Jun 25 2019 @ 03:16:15
2021-03-22 03:09:48.507 QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.ex'Current working dir: C:\Users\Bone Crusher\AppData\Roaming\Qualcomm\QFIL\COMPORT_23
2021-03-22 03:09:48.522 Sahara mappings:
2021-03-22 03:09:48.522 2: amss.mbn
2021-03-22 03:09:48.522 6: apps.mbn
2021-03-22 03:09:48.522 8: dsp1.mbn
2021-03-22 03:09:48.522 10: dbl.mbn
2021-03-22 03:09:48.522 11: osbl.mbn
2021-03-22 03:09:48.522 12: dsp2.mbn
2021-03-22 03:09:48.522 16: efs1.mbn
2021-03-22 03:09:48.522 17: efs2.mbn
2021-03-22 03:09:48.522 20: efs3.mbn
2021-03-22 03:09:48.522 21: sbl1.mbn
2021-03-22 03:09:48.522 22: sbl2.mbn
2021-03-22 03:09:48.522 23: rpm.mbn
2021-03-22 03:09:48.522 25: tz.mbn
2021-03-22 03:09:48.522 28: dsp3.mbn
2021-03-22 03:09:48.522 29: acdb.mbn
2021-03-22 03:09:48.522 30: wdt.mbn
2021-03-22 03:09:48.522 31: mba.mbn
2021-03-22 03:09:48.522 13: E:\old\ungames\aFull a37f\SMARTPHONES.HOW_MSM8916_64-USER_5.1.1_LMY47V_ENG.ROOT.20190711.032745_RELEASE-KEYS\prog_emmc_firehose_8936.mbn
2021-03-22 03:09:48.522
2021-03-22 03:09:48.522 03:09:48: Requested ID 13, file: "E:\old\ungames\aFull a37f\SMARTPHONES.HOW_MSM8916_64-USER_5.1.1_LMY47V_ENG.ROOT.20190711.032745_RELEASE-KEYS\prog_emmc_firehose_8936.mbn"
2021-03-22 03:09:48.522
2021-03-22 03:09:48.522 03:09:48: 91624 bytes transferred in 0.031000 seconds (2.8187MBps)
2021-03-22 03:09:48.522
2021-03-22 03:09:48.522
2021-03-22 03:09:48.522
2021-03-22 03:09:48.522 03:09:48: File transferred successfully
2021-03-22 03:09:48.538
2021-03-22 03:09:48.538
2021-03-22 03:09:48.538 NOTE: Target requested image 13 which is DeviceProgrammer. Forcing QUIT. This is by design, ** All is well ** SUCCESS!!
2021-03-22 03:09:48.538
2021-03-22 03:09:48.538
2021-03-22 03:09:48.538 03:09:48: Sahara protocol completed
2021-03-22 03:09:48.538 Sending Programmer Finished
2021-03-22 03:09:48.538 Switch To FireHose
2021-03-22 03:09:48.538 Wait for 3 seconds...
2021-03-22 03:09:51.549 Max Payload Size to Target:49152 Bytes
2021-03-22 03:09:51.549 Active Boot Partition:0
2021-03-22 03:09:51.549 Device Type:emmc
2021-03-22 03:09:51.549 Platform:8x26
2021-03-22 03:09:51.549 Disable Ack Raw Data Every N Packets
2021-03-22 03:09:51.549 Skip Write:False
2021-03-22 03:09:51.549 Always Validate:False
2021-03-22 03:09:51.549 Use Verbose:False
2021-03-22 03:09:51.549 ***** Working Folder:C:\Users\Bone Crusher\AppData\Roaming\Qualcomm\QFIL\COMPORT_23
2021-03-22 03:09:51.767
2021-03-22 03:09:51.767 Base Version: 19.06.10.18.44
2021-03-22 03:09:51.767 Binary build date: Jun 25 2019 @ 03:16:10
2021-03-22 03:09:51.767 Incremental Build version: 19.06.25.03.16.10
2021-03-22 03:09:51.767
2021-03-22 03:09:51.767 03:09:51: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
2021-03-22 03:09:51.767 ************************************************
2021-03-22 03:09:51.767 C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM23 --sendxml=rawprogram0.xml --search_path=E:\old\ungames\aFull a37f\SMARTPHONES.HOW_MSM8916_64-USER_5.1.1_LMY47V_ENG.ROOT.20190711.032745_RELEASE-KEYS --noprompt --showpercentagecomplete --zlpawarehost=1 --verify_programming --memoryname=emmc
2021-03-22 03:09:51.767 ************************************************
2021-03-22 03:09:51.767
2021-03-22 03:09:51.767 03:09:51: INFO: Current working dir (cwd): C:\Users\Bone Crusher\AppData\Roaming\Qualcomm\QFIL\COMPORT_23\
2021-03-22 03:09:51.767 03:09:51: INFO: Showing network mappings to allow debugging
2021-03-22 03:09:51.767 03:09:51: INFO:
2021-03-22 03:09:51.767
2021-03-22 03:09:51.767
2021-03-22 03:09:51.767
2021-03-22 03:09:51.767 03:09:51: INFO: Trying to store 'rawprogram0.xml' in string table
2021-03-22 03:09:51.767 03:09:51: INFO: Looking for file 'rawprogram0.xml'
2021-03-22 03:09:51.783 03:09:51: INFO: User wants to talk to port '\\.\COM23'
2021-03-22 03:09:51.783 03:09:51: INFO: Took 0.15600000 seconds to open port
2021-03-22 03:09:51.783 03:09:51: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
2021-03-22 03:09:51.783 03:09:51: INFO: Looking for file 'gpt_main0_partition_MSM_15399.xml.bin'
2021-03-22 03:09:51.783 03:09:51: INFO: Looking for file 'NON-HLOS.bin'
2021-03-22 03:09:51.783 03:09:51: INFO: Looking for file 'DDR'
2021-03-22 03:09:51.783
2021-03-22 03:09:51.783
2021-03-22 03:09:51.783 (_)
2021-03-22 03:09:51.783 __ ____ _ _ __ _ __ _ _ __ __ _
2021-03-22 03:09:51.783 \ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
2021-03-22 03:09:51.783 \ V V / (_| | | | | | | | | | | (_| |
2021-03-22 03:09:51.783 \_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
2021-03-22 03:09:51.783 __/ |
2021-03-22 03:09:51.783 |___/
2021-03-22 03:09:51.783
2021-03-22 03:09:51.783
2021-03-22 03:09:51.783 03:09:51: WARNING: Couldn't find the file 'DDR', returning NULL
2021-03-22 03:09:51.783
2021-03-22 03:09:51.783
2021-03-22 03:09:51.783 _____
2021-03-22 03:09:51.783 | ___|
2021-03-22 03:09:51.783 | |__ _ __ _ __ ___ _ __
2021-03-22 03:09:51.783 | __| '__| '__/ _ \| '__|
2021-03-22 03:09:51.783 | |__| | | | | (_) | |
2021-03-22 03:09:51.783 \____/_| |_| \___/|_|
2021-03-22 03:09:51.798
2021-03-22 03:09:51.798
2021-03-22 03:09:51.798 03:09:51: {ERROR: 'DDR' not found. You could possibly try --notfiles=DDR,OtherFileToSkip.bin (note, exiting since you specified --noprompt)}
2021-03-22 03:09:51.798
2021-03-22 03:09:51.798 Writing log to 'C:\Users\Bone Crusher\AppData\Roaming\Qualcomm\QFIL\COMPORT_23\port_trace.txt', might take a minute
2021-03-22 03:09:51.798
2021-03-22 03:09:51.798
2021-03-22 03:09:51.798 Log is 'C:\Users\Bone Crusher\AppData\Roaming\Qualcomm\QFIL\COMPORT_23\port_trace.txt'
2021-03-22 03:09:51.798
2021-03-22 03:09:51.798 Download Fail:FireHose Fail:FHLoader Failrocess fail
2021-03-22 03:09:51.798 Finish Download
LINUX 20.10 (Ubuntu Groovy)
after installing QDL and compilng different versions i've found many command orders, each gives different value or error... also changing firehose dose the same
Spoiler
./qdl --debug --storage emmc prog_emmc_firehose_8936_oppo1.mbn rawprogram0_MSM_15399.xml patch0.xml
HELLO version: 0x2 compatible: 0x1 max_len: 1024 mode: 0
READ image: 13 offset: 0x0 length: 0x34
READ image: 13 offset: 0x34 length: 0x60
READ image: 13 offset: 0x1000 length: 0x1000
READ image: 13 offset: 0x2000 length: 0x988
READ image: 13 offset: 0x3000 length: 0x1000
READ image: 13 offset: 0x4000 length: 0x1000
READ image: 13 offset: 0x5000 length: 0x1000
READ image: 13 offset: 0x6000 length: 0x1000
READ image: 13 offset: 0x7000 length: 0x1000
READ image: 13 offset: 0x8000 length: 0x1000
READ image: 13 offset: 0x9000 length: 0x1000
READ image: 13 offset: 0xa000 length: 0x1000
READ image: 13 offset: 0xb000 length: 0x1000
READ image: 13 offset: 0xc000 length: 0x1000
READ image: 13 offset: 0xd000 length: 0x1000
READ image: 13 offset: 0xe000 length: 0x1000
READ image: 13 offset: 0xf000 length: 0x1000
READ image: 13 offset: 0x10000 length: 0x1000
READ image: 13 offset: 0x11000 length: 0x1000
READ image: 13 offset: 0x12000 length: 0x1000
READ image: 13 offset: 0x13000 length: 0x1000
READ image: 13 offset: 0x14000 length: 0x1000
READ image: 13 offset: 0x15000 length: 0x1000
READ image: 13 offset: 0x16000 length: 0x1000
READ image: 13 offset: 0x17000 length: 0x1000
READ image: 13 offset: 0x18000 length: 0x670
END OF IMAGE image: 13 status: 0
DONE status: 0
FIREHOSE WRITE: <?xml version="1.0"?>
<data><nop value="ping"/></data>
nothing will happen or show i waited for 5 minutes and nothing
different firehose
Spoiler
./qdl --debug --storage emmc prog_emmc_firehose_8936.mbn rawprogram0_MSM_15399.xml patch0.xml
HELLO version: 0x2 compatible: 0x1 max_len: 1024 mode: 0
READ image: 13 offset: 0x0 length: 0x34
READ image: 13 offset: 0x34 length: 0x60
READ image: 13 offset: 0x1000 length: 0x1000
READ image: 13 offset: 0x2000 length: 0x988
READ image: 13 offset: 0x3000 length: 0x1000
READ image: 13 offset: 0x4000 length: 0x1000
READ image: 13 offset: 0x5000 length: 0x1000
READ image: 13 offset: 0x6000 length: 0x1000
READ image: 13 offset: 0x7000 length: 0x1000
READ image: 13 offset: 0x8000 length: 0x1000
READ image: 13 offset: 0x9000 length: 0x1000
READ image: 13 offset: 0xa000 length: 0x1000
READ image: 13 offset: 0xb000 length: 0x1000
READ image: 13 offset: 0xc000 length: 0x1000
READ image: 13 offset: 0xd000 length: 0x1000
READ image: 13 offset: 0xe000 length: 0x1000
READ image: 13 offset: 0xf000 length: 0x1000
READ image: 13 offset: 0x10000 length: 0x1000
READ image: 13 offset: 0x11000 length: 0x1000
READ image: 13 offset: 0x12000 length: 0x1000
READ image: 13 offset: 0x13000 length: 0x1000
READ image: 13 offset: 0x14000 length: 0x1000
READ image: 13 offset: 0x15000 length: 0x1000
READ image: 13 offset: 0x16000 length: 0x1000
READ image: 13 offset: 0x17000 length: 0xbcc
END OF IMAGE image: 13 status: 0
DONE status: 0
FIREHOSE READ: <?xml version="1.0" encoding="UTF-8" ?><data><log value="init storage:fail " /></data>
LOG: init storage:fail
FIREHOSE WRITE: <?xml version="1.0"?>
<data><nop value="ping"/></data>
FIREHOSE READ: <?xml version="1.0" encoding="UTF-8" ?><data><log value="init storage:fail " /></data>
LOG: init storage:fail
this will repeat for ever...
different command order
Spoiler
./qdl --storage emmc --include '/media/bonescrusher/Kk/Drive D/old/ungames/A37fEX_11_A.38_190711/test' '/media/bonescrusher/Kk/Drive D/old/ungames/A37fEX_11_A.38_190711/test/prog_emmc_firehose_8936_oppo1.mbn' '/media/bonescrusher/Kk/Drive D/old/ungames/A37fEX_11_A.38_190711/test/rawprogram0_MSM_15399.xml' '/media/bonescrusher/Kk/Drive D/old/ungames/A37fEX_11_A.38_190711/test/patch0.xml'
HELLO version: 0x2 compatible: 0x1 max_len: 1024 mode: 0
READ image: 13 offset: 0x0 length: 0x34
READ image: 13 offset: 0x34 length: 0x60
READ image: 13 offset: 0x1000 length: 0x1000
READ image: 13 offset: 0x2000 length: 0x988
READ image: 13 offset: 0x3000 length: 0x1000
READ image: 13 offset: 0x4000 length: 0x1000
READ image: 13 offset: 0x5000 length: 0x1000
READ image: 13 offset: 0x6000 length: 0x1000
READ image: 13 offset: 0x7000 length: 0x1000
READ image: 13 offset: 0x8000 length: 0x1000
READ image: 13 offset: 0x9000 length: 0x1000
READ image: 13 offset: 0xa000 length: 0x1000
READ image: 13 offset: 0xb000 length: 0x1000
READ image: 13 offset: 0xc000 length: 0x1000
READ image: 13 offset: 0xd000 length: 0x1000
READ image: 13 offset: 0xe000 length: 0x1000
READ image: 13 offset: 0xf000 length: 0x1000
READ image: 13 offset: 0x10000 length: 0x1000
READ image: 13 offset: 0x11000 length: 0x1000
READ image: 13 offset: 0x12000 length: 0x1000
READ image: 13 offset: 0x13000 length: 0x1000
READ image: 13 offset: 0x14000 length: 0x1000
READ image: 13 offset: 0x15000 length: 0x1000
READ image: 13 offset: 0x16000 length: 0x1000
READ image: 13 offset: 0x17000 length: 0x1000
READ image: 13 offset: 0x18000 length: 0x670
END OF IMAGE image: 13 status: 0
DONE status: 0
nothing will come up..
another firehose(s)
Spoiler
./qdl --storage emmc --include '/media/bonescrusher/Kk/Drive D/old/ungames/A37fEX_11_A.38_190711/test' '/media/bonescrusher/Kk/Drive D/old/ungames/A37fEX_11_A.38_190711/test/prog_emmc_firehose_8936.mbn' '/media/bonescrusher/Kk/Drive D/old/ungames/A37fEX_11_A.38_190711/test/rawprogram0_MSM_15399.xml' '/media/bonescrusher/Kk/Drive D/old/ungames/A37fEX_11_A.38_190711/test/patch0.xml'
HELLO version: 0x2 compatible: 0x1 max_len: 1024 mode: 0
READ image: 13 offset: 0x0 length: 0x34
READ image: 13 offset: 0x34 length: 0x60
READ image: 13 offset: 0x1000 length: 0x1000
READ image: 13 offset: 0x2000 length: 0x988
READ image: 13 offset: 0x3000 length: 0x1000
READ image: 13 offset: 0x4000 length: 0x1000
READ image: 13 offset: 0x5000 length: 0x1000
READ image: 13 offset: 0x6000 length: 0x1000
READ image: 13 offset: 0x7000 length: 0x1000
READ image: 13 offset: 0x8000 length: 0x1000
READ image: 13 offset: 0x9000 length: 0x1000
READ image: 13 offset: 0xa000 length: 0x1000
READ image: 13 offset: 0xb000 length: 0x1000
READ image: 13 offset: 0xc000 length: 0x1000
READ image: 13 offset: 0xd000 length: 0x1000
READ image: 13 offset: 0xe000 length: 0x1000
READ image: 13 offset: 0xf000 length: 0x1000
READ image: 13 offset: 0x10000 length: 0x1000
READ image: 13 offset: 0x11000 length: 0x1000
READ image: 13 offset: 0x12000 length: 0x1000
READ image: 13 offset: 0x13000 length: 0x1000
READ image: 13 offset: 0x14000 length: 0x1000
READ image: 13 offset: 0x15000 length: 0x1000
READ image: 13 offset: 0x16000 length: 0x1000
READ image: 13 offset: 0x17000 length: 0xbcc
END OF IMAGE image: 13 status: 0
DONE status: 0
LOG: init storage:fail
LOG: init storage:fail
LOG: init storage:fail
will keep repeating...
another one
Spoiler
/qdl6 prog_emmc_firehose_8936.mbn rawprogram0_MSM_15399.xml patch0.xml
Waiting for EDL device
/dev/bus/usb/001/105
HELLO version: 0x2 compatible: 0x1 max_len: 1024 mode: 0
READ image: 13 offset: 0x0 length: 0x34
READ image: 13 offset: 0x34 length: 0x60
READ image: 13 offset: 0x1000 length: 0x1000
READ image: 13 offset: 0x2000 length: 0x988
READ image: 13 offset: 0x3000 length: 0x1000
READ image: 13 offset: 0x4000 length: 0x1000
READ image: 13 offset: 0x5000 length: 0x1000
READ image: 13 offset: 0x6000 length: 0x1000
READ image: 13 offset: 0x7000 length: 0x1000
READ image: 13 offset: 0x8000 length: 0x1000
READ image: 13 offset: 0x9000 length: 0x1000
READ image: 13 offset: 0xa000 length: 0x1000
READ image: 13 offset: 0xb000 length: 0x1000
READ image: 13 offset: 0xc000 length: 0x1000
READ image: 13 offset: 0xd000 length: 0x1000
READ image: 13 offset: 0xe000 length: 0x1000
READ image: 13 offset: 0xf000 length: 0x1000
READ image: 13 offset: 0x10000 length: 0x1000
READ image: 13 offset: 0x11000 length: 0x1000
READ image: 13 offset: 0x12000 length: 0x1000
READ image: 13 offset: 0x13000 length: 0x1000
READ image: 13 offset: 0x14000 length: 0x1000
READ image: 13 offset: 0x15000 length: 0x1000
READ image: 13 offset: 0x16000 length: 0x1000
READ image: 13 offset: 0x17000 length: 0xbcc
END OF IMAGE image: 13 status: 0
DONE status: 0
LOG: init storage:fail
qdl6: failed to read: Connection timed out
ERROR: n = -1, errno = 110 (Connection timed out)
ends here
1- im still having the feeling this is firehose/parsing errors
so if anyone have 8916 firehose and full emmc backup which is for this phone, can end all the doubts,
2- i've already searched and downloaded many firmwares wasted around 45 GB of internet quota, all comes with 8936
3- if anyone knows how to put this phone in RIGHT OR REAL 9008 MODE (Test Points) (Keys)..etc beacuse all i've found also isnt for this board, because there might be a chance this phone is giving a fake 9008 mode or even wrong drivers masking the real state.
Many Thanks in Advance