Related
I am using moto x style and unlocked bootloader with 'Windroid Universal Android Toolkit' v2.5 but cannot flash TWRP and root this apl. Today I tried flash TWRP and then root but after showing 'Congratulation' pop up,my phone stucked on 'No command' page. I tried twice and same result. Later i check there is either no TWRP or root by SuperSU. And i see youtube video and and read many XDA forum and comments and most of the users says the phone stuck on M logo page when reboot after the root process. And all says its a issue with Marshmallow. And most of the xda posts and youtube video are made during 5.1.1 so there is no problem in that video during flash TWRP and root. So i need a seamless process to flash TWRP and root on Marshmallow so that it doesnot stuck on M logo. And I dont want to downgrade to L for root. And unluckily if it stuck M logo thwn what to do to go back to home screen?Thank you.
http://forum.xda-developers.com/moto-x-style/general/guide-how-to-root-pure-style-t3503958
Look in my sig...
It's in my signature... There are multiple links to what your looking for and other threads, if you are on computer they should be immediately below the message, if you're in the XDA app you have to look in the user profile (don't think it's possible in Tapatalk though).
http://forum.xda-developers.com/moto-x-style/general/guide-how-to-root-pure-style-t3503958
acejavelin said:
It's in my signature... There are multiple links to what your looking for and other threads, if you are on computer they should be immediately below the message, if you're in the XDA app you have to look in the user profile (don't think it's possible in Tapatalk though).
http://forum.xda-developers.com/moto-x-style/general/guide-how-to-root-pure-style-t3503958
Click to expand...
Click to collapse
My build no is 24.49-18-4. So is this process suitable for this build no? And still i dont flash TWRP. I tried with "Windroid Universal Android Toolkit app" to flash TWRP. though it showed a 'Successful' pop up but it didn't. Can I go with any old process to flash TWRP or u have a new process?
Atanu Mukherjee said:
My build no is 24.49-18-4. So is this process suitable for this build no? And still i dont flash TWRP. I tried with "Windroid Universal Android Toolkit app" to flash TWRP. though it showed a 'Successful' pop up but it didn't. Can I go with any old process to flash TWRP or u have a new process?
Click to expand...
Click to collapse
Step 1 - Stop using toolkits! They rarely work right on modern Android devices. With the Moto the only safe, reliable way to root is manually.
I don't know what the 'old way' is to flash TWRP your referring to here... I recommend one time booting twrp with "fastboot boot twrp.img" command (replace twrp.img with your actual twrp image file) then perform a backup to the SD card or USB OTG device and put it away for safe keeping. Then flash twrp either with twrp you have booted, or manually with "fastboot flash recovery twrp.img"
The rooting method I linked before is valid for all Marshmallow builds, if you have Lollipop or Nougat you need to find a different method.
acejavelin said:
Step 1 - Stop using toolkits! They rarely work right on modern Android devices. With the Moto the only safe, reliable way to root is manually.
I don't know what the 'old way' is to flash TWRP your referring to here... I recommend one time booting twrp with "fastboot boot twrp.img" command (replace twrp.img with your actual twrp image file) then perform a backup to the SD card or USB OTG device and put it away for safe keeping. Then flash twrp either with twrp you have booted, or manually with "fastboot flash recovery twrp.img"
The rooting method I linked before is valid for all Marshmallow builds, if you have Lollipop or Nougat you need to find a different method.
Click to expand...
Click to collapse
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
I am saying about this official method which is on twrp.me site. And after typing 'fastboot reboot' what I have to do to go home page? Sorry to ask u so many things. Actually I am totally new in this thing and very much worry after facing issues 2-3 times. And thank u very much for fast reply.
One more ques, I have unlocked bootloader with that "Windroid Universal Android Toolkit". Now in fastboot it shows 'bootloader unlocked,code 3' is that ok? As u say toolkit doesnot work on modern devices.
Atanu Mukherjee said:
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
I am saying about this official method which is on twrp.me site. And after typing 'fastboot reboot' what I have to do to go home page? Sorry to ask u so many things. Actually I am totally new in this thing and very much worry after facing issues 2-3 times. And thank u very much for fast reply.
One more ques, I have unlocked bootloader with that "Windroid Universal Android Toolkit". Now in fastboot it shows 'bootloader unlocked,code 3' is that ok? As u say toolkit doesnot work on modern devices.
Click to expand...
Click to collapse
So Moto is a tad different... After you flash recovery, do not reboot with fastboot, instead use the Vol Dn key select Recovery and press Power to start it. When the splash screen comes up, allow changes to system, then I the TWRP main menu select Reboot - Recovery, the device will start TWRP again and it should be "locked" in. From there perform the rooting.
acejavelin said:
So Moto is a tad different... After you flash recovery, do not reboot with fastboot, instead use the Vol Dn key select Recovery and press Power to start it. When the splash screen comes up, allow changes to system, then I the TWRP main menu select Reboot - Recovery, the device will start TWRP again and it should be "locked" in. From there perform the rooting.
Click to expand...
Click to collapse
That mean after typing fastboot flash recovery twrp.img press enter and then i can plug off the usb keeping my device on fastboot then changes to recovery and do the rest?
Btw suppose if i dont want to root it at that time,then what i do? I mean just after flash recovery how to go to home screen without rooting?
And when i want to perform root process later,after installing SuperSU zip if I press power button and vol down then may I go to twrp recovery or ph stock recovery?
Atanu Mukherjee said:
That mean after typing fastboot flash recovery twrp.img press enter and then i can plug off the usb keeping my device on fastboot then changes to recovery and do the rest?
Btw suppose if i dont want to root it at that time,then what i do? I mean just after flash recovery how to go to home screen without rooting?
And when i want to perform root process later,after installing SuperSU zip if I press power button and vol down then may I go to twrp recovery or ph stock recovery?
Click to expand...
Click to collapse
OK... I'm confused, why are you unlocking and installing twrp if your not going root or flash a custom ROM?
acejavelin said:
OK... I'm confused, why are you unlocking and installing twrp if your not going root or flash a custom ROM?
Click to expand...
Click to collapse
I will definately do so. I also want to use CM14.1 but i want to do so step by step. Actually after facing issues 2-3 times i am little bit worry now. That is true. So hesitate to perform both at a single time.
Atanu Mukherjee said:
I will definately do so. I also want to use CM14.1 but i want to do so step by step. Actually after facing issues 2-3 times i am little bit worry now. That is true. So hesitate to perform both at a single time.
Click to expand...
Click to collapse
You don't need to root if your going CM, flash TWRP, backup, and flash CM. You don't need to over complicate it.
If you boot (not flash) TWRP and backup then get a copy to safe place there is little risk of anything going wrong.
acejavelin said:
You don't need to root if your going CM, flash TWRP, backup, and flash CM. You don't need to over complicate it.
If you boot (not flash) TWRP and backup then get a copy to safe place there is little risk of anything going wrong.
Click to expand...
Click to collapse
Ok. But is there any regular chance of going wrong during flash TWRP or flash CM? I backed up all internal important data to external sd card and when I perform these process I just remove that sd from phone.
You pls tell me how to go to home screen after flashing TWRP?
And if I need to root it later then also what to do then? I mean if then I press power and vol minus then will I get TWRP recovery to root it or it will be redirectred to phone custom recovery?
Atanu Mukherjee said:
Ok. But is there any regular chance of going wrong during flash TWRP or flash CM? I backed up all internal important data to external sd card and when I perform these process I just remove that sd from phone.
You pls tell me how to go to home screen after flashing TWRP?
And if I need to root it later then also what to do then? I mean if then I press power and vol minus then will I get TWRP recovery to root it or it will be redirectred to phone custom recovery?
Click to expand...
Click to collapse
There is always a chance of something going wrong, no one can guarantee everything will be fine. We have had people do everything perfectly but something happens and it's bricked... It's rare but does happen.
After you flash TWRP in the bootloader, press Vol Dn until it says Recovery and press power to start it, after several seconds you will get a screen that will ask if it can write to system, select yes, the next screen will be the TWRP home screen.
Once you flash TWRP, your stock recovery is gone, but you access it the same way... Power off, press and hold PWR+Vol Dn and in the bootloader menu select Recovery and press power.
acejavelin said:
There is always a chance of something going wrong, no one can guarantee everything will be fine. We have had people do everything perfectly but something happens and it's bricked... It's rare but does happen.
After you flash TWRP in the bootloader, press Vol Dn until it says Recovery and press power to start it, after several seconds you will get a screen that will ask if it can write to system, select yes, the next screen will be the TWRP home screen.
Once you flash TWRP, your stock recovery is gone, but you access it the same way... Power off, press and hold PWR+Vol Dn and in the bootloader menu select Recovery and press power.
Click to expand...
Click to collapse
Thank you very much for your kind guidance and quick reply. I will perform this may be tomorrow and then inform you. If it is bricked or stucked in any stage/page then is there any instant process to go back to safety?
acejavelin said:
There is always a chance of something going wrong, no one can guarantee everything will be fine. We have had people do everything perfectly but something happens and it's bricked... It's rare but does happen.
After you flash TWRP in the bootloader, press Vol Dn until it says Recovery and press power to start it, after several seconds you will get a screen that will ask if it can write to system, select yes, the next screen will be the TWRP home screen.
Once you flash TWRP, your stock recovery is gone, but you access it the same way... Power off, press and hold PWR+Vol Dn and in the bootloader menu select Recovery and press power.
Click to expand...
Click to collapse
I am listing here only the commands,u just tell me is this ok?
adb devices
adb reboot bootloader
fastboot devices
fastboot flash recovery twrp.img
fastboot boot twrp.img
Will these commands directly take me to twrp page?
And here I put a pic of the twrp page. If I dont want to root it then what to do? Click reboot option or anything else to do?
Atanu Mukherjee said:
I am listing here only the commands,u just tell me is this ok?
adb devices
adb reboot bootloader
fastboot devices
fastboot flash recovery twrp.img
fastboot boot twrp.img
Will these commands directly take me to twrp page?
And here I put a pic of the twrp page. If I dont want to root it then what to do? Click reboot option or anything else to do?
Click to expand...
Click to collapse
Your last two are redundant, either flash or boot, you don't have to do both, but each has a purpose... Flash is permanent, boot is transient and will disappear on a reboot.
Boot TWRP first, the first time it will not take you to the main page initially but show you a notification page asking if you want allow it to make changes to the system or keep it read-only, this time only do not allow changes... Then the main screen of TWRP will be displayed and you should do a full backup of all partitions to the SD card.
Flash will just write the recovery partition, it doesn't start anything, you select recovery from the fastboot menu to start it.
acejavelin said:
Your last two are redundant, either flash or boot, you don't have to do both, but each has a purpose... Flash is permanent, boot is transient and will disappear on a reboot.
Boot TWRP first, the first time it will not take you to the main page initially but show you a notification page asking if you want allow it to make changes to the system or keep it read-only, this time only do not allow changes... Then the main screen of TWRP will be displayed and you should do a full backup of all partitions to the SD card.
Flash will just write the recovery partition, it doesn't start anything, you select recovery from the fastboot menu to start it.
Click to expand...
Click to collapse
So after "fastboot boot twrp.img" i have to allow to make changes and have to do a nandroid backup. After that will I get option to "Reboot?"
And later when I went to recovery I will get twrp page instead of stock recovery? 1st I think I should flash cm13 then root then upgrade to 14.1 bcz still a feel little worry to root it on stock rom.
Atanu Mukherjee said:
So after "fastboot boot twrp.img" i have to allow to make changes and have to do a nandroid backup. After that will I get option to "Reboot?"
And later when I went to recovery I will get twrp page instead of stock recovery? 1st I think I should flash cm13 then root then upgrade to 14.1 bcz still a feel little worry to root it on stock rom.
Click to expand...
Click to collapse
No, almost every part of what your saying is wrong...
Boot twrp and do not allow changes first time and backup. This will give a clean backup to restore from if things go badly.
After this is complete, in TWRP go to Reboot menu and select Bootloader, flash TWRP, do not reboot but use the bootloader menu to start TWRP. This time allow it to make changes to system. At the main menu if twrp go to Reboot - Recovery the device will restart and TWRP will load automatically, this step will lock in twrp so the stock OS doesn't replace it.
You only need to root stock rom, you don't need to root CM roms as they are already rooted (there are a few roms that are not pre-rooted but they are rare and none of the ones your talking about). As far as CM 13 vs 14.1 I can't really help you but from I've read both are stable enough for a daily driver device.
acejavelin said:
No, almost every part of what your saying is wrong...
Boot twrp and do not allow changes first time and backup. This will give a clean backup to restore from if things go badly.
After this is complete, in TWRP go to Reboot menu and select Bootloader, flash TWRP, do not reboot but use the bootloader menu to start TWRP. This time allow it to make changes to system. At the main menu if twrp go to Reboot - Recovery the device will restart and TWRP will load automatically, this step will lock in twrp so the stock OS doesn't replace it.
You only need to root stock rom, you don't need to root CM roms as they are already rooted (there are a few roms that are not pre-rooted but they are rare and none of the ones your talking about). As far as CM 13 vs 14.1 I can't really help you but from I've read both are stable enough for a daily driver device.
Click to expand...
Click to collapse
After typing 'fastboot flash recovery twrp.img' i switch to recovery and select it. But it shows recovery failed,bla bla in red colour. I tried 3 times but same result. What to do? now again when I go to the recovery,i see still it is the stock recovery.
Hi,
don't know if this problem has already occurred before.
I had lineage and TRWP installed on my Axon 7 (EU version) and wanted to go back to the stock a2017g.
Therefore I deleted the ROM and wiped everything with TWRP.
Then I deleted TWRP and now i'm stuck at the the bootloader (which is unlocked), but TWRP seems to be gone.
The main problem is, whenever I try to flash a new stock rom (via recovery), I get the error "signature verification failed" and the process is aborted with no change to the system whatsoever.
Is there anything I can do at this point or is my phone practically dead?
Thanks in advance for any help.
tempest89 said:
Hi,
don't know if this problem has already occurred before.
I had lineage and TRWP installed on my Axon 7 (EU version) and wanted to go back to the stock a2017g.
Therefore I deleted the ROM and wiped everything with TWRP.
Then I deleted TWRP and now i'm stuck at the the bootloader (which is unlocked), but TWRP seems to be gone.
The main problem is, whenever I try to flash a new stock rom (via recovery), I get the error "signature verification failed" and the process is aborted with no change to the system whatsoever.
Is there anything I can do at this point or is my phone practically dead?
Thanks in advance for any help.
Click to expand...
Click to collapse
Try to boot into bootloader interface, and issue command "fastboot flash recovery TWRP.img" on your computer( the current working directory should contain the TWRP.img file) . If your bootloader is unlocked, you should see no error of this command. Then press up/down button to select recovery mode. You should see the familiar TWRP again. Good luck!
tempest89 said:
Hi,
don't know if this problem has already occurred before.
I had lineage and TRWP installed on my Axon 7 (EU version) and wanted to go back to the stock a2017g.
Therefore I deleted the ROM and wiped everything with TWRP.
Then I deleted TWRP and now i'm stuck at the the bootloader (which is unlocked), but TWRP seems to be gone.
The main problem is, whenever I try to flash a new stock rom (via recovery), I get the error "signature verification failed" and the process is aborted with no change to the system whatsoever.
Is there anything I can do at this point or is my phone practically dead?
Thanks in advance for any help.
Click to expand...
Click to collapse
Did you try flashing an official full zip, like B10? That's another thing you can try, since you're going to lose TWRP after you flash a stock rom anyways
If you dont have recovery, flash it from edl mode, you can flash twrp or stock.
Once you install it, performa a full wipe from stock recovery, and flash a full zip.
I have similar problems, I dont loose recovery, but stock dont boot after coming back from aosp, a factory reset did the job. I think is because different filesystems in data partition
Choose an username... said:
Did you try flashing an official full zip, like B10? That's another thing you can try, since you're going to lose TWRP after you flash a stock rom anyways
Click to expand...
Click to collapse
Hi, the B10 ROM from the ZTE homepage did the trick.
Worked out nicely.
Thank you so much.
One final question remains for myself: How can I relock the bootloader (so that the 5 second screen won't show up at the start).
Tried different ways with adb and fastload, but nothing seemed to have an effect here.
So what to do?
Thank you again for your help.
tempest89 said:
Hi, the B10 ROM from the ZTE homepage did the trick.
Worked out nicely.
Thank you so much.
One final question remains for myself: How can I relock the bootloader (so that the 5 second screen won't show up at the start).
Tried different ways with adb and fastload, but nothing seemed to have an effect here.
So what to do?
Thank you again for your help.
Click to expand...
Click to collapse
you shouldn't. Fastboot should do the trick, by doing fastboot oem lock, but many people reported bricking and bad stuff...
Actually that screen comes very handy in case of a brick or if you want to enter a specific mode.l, you just select the mode and voila
Do you have fastboot? I don't know if B10 still has it, but 7.0 hasn't got it
Choose an username... said:
you shouldn't. Fastboot should do the trick, by doing fastboot oem lock, but many people reported bricking and bad stuff...
Actually that screen comes very handy in case of a brick or if you want to enter a specific mode.l, you just select the mode and voila
Do you have fastboot? I don't know if B10 still has it, but 7.0 hasn't got it
Click to expand...
Click to collapse
Hi,
I tried adb and fastboot via pc and with the axon toolkit.
The adb worked fine, but no sign of effect by the fastboot commands.
So I guess I don't have it.
Is there any other solution to at least bypass the 5 second screen?
Thanks
tempest89 said:
Hi,
I tried adb and fastboot via pc and with the axon toolkit.
The adb worked fine, but no sign of effect by the fastboot commands.
So I guess I don't have it.
Is there any other solution to at least bypass the 5 second screen?
Thanks
Click to expand...
Click to collapse
Lol fastboot is not something like EDL, it looks similar to the 5 sec screen...
When you get the 5 sec screen, use the vol keys and pwr to get to the Fastboot option and enter - it should reboot and get to fastboot after some time
You should look up what fastboot, EDL, ADB and DFU are before doing all this stuff - you can mess up badly, and by not knowing you're complicating everything - my explanation and your understanding
I think I messed up my PH-1 something royally.
All I was trying to do is unlock my bootloader and load Magisk.
To preface this, my PH-1 seemed to act a little wonky from the get-go. I bought it 3rd person from a guy on craigslist so anything warranty involved I think I'm out of luck.
The phone would take a while to power on, it took something like 10secs on the power button just to turn it on. And if I set it to reboot , it boots into the bootloader. Also, I was never able to access the recovery (even using power + up). It always felt like I had to hold the buttons for way to long to get to its destination; e.g. up and power to get into fastboot.
Ok where I'm at now. In can occasionally get into fastboot mostly after it bootlooping a few times. It won't get past the Essential logo if I try to boot it up.
PS I was able to unlock the bootloader.
Steps I took to remedy this:
> erase all user data in fastboot
> hold power + u + d to hard power off
> follow this guide https://forum.xda-developers.com/essential-phone/how-to/guide-rooting-essential-ph-1-magisk-t3701976
> attempt to install stock system image via flash-all
>a ton other
Here are the results of that.
https://imgur.com/a/iVwwS
Help me guys please. :crying:
A little progress, I was unable to unlock_critical but its still hanging here
https://imgur.com/a/IdZum
jAm-0 said:
I think I messed up my PH-1 something royally.
All I was trying to do is unlock my bootloader and load Magisk.
To preface this, my PH-1 seemed to act a little wonky from the get-go. I bought it 3rd person from a guy on craigslist so anything warranty involved I think I'm out of luck.
The phone would take a while to power on, it took something like 10secs on the power button just to turn it on. And if I set it to reboot , it boots into the bootloader. Also, I was never able to access the recovery (even using power + up). It always felt like I had to hold the buttons for way to long to get to its destination; e.g. up and power to get into fastboot.
Ok where I'm at now. In can occasionally get into fastboot mostly after it bootlooping a few times. It won't get past the Essential logo if I try to boot it up.
PS I was able to unlock the bootloader.
Steps I took to remedy this:
> erase all user data in fastboot
> hold power + u + d to hard power off
> follow this guide https://forum.xda-developers.com/essential-phone/how-to/guide-rooting-essential-ph-1-magisk-t3701976
> attempt to install stock system image via flash-all
>a ton other
Here are the results of that.
https://imgur.com/a/iVwwS
Help me guys please. :crying:
Click to expand...
Click to collapse
read through this and follow the steps should be good to go.
https://forum.xda-developers.com/essential-phone/development/stock-7-1-1-nmj20d-t3701681
This is also very helpful
https://mata.readthedocs.io/en/latest/
That's the exact process I was going through, and it finally booted up.
The issue I was having was a bad usb connection which wouldn't allow me to unlock_critical.
SOLVED. Still no Magisk, we'll worry about that another time. 5hrs of troubleshooting is enough for one night.
https://imgur.com/a/ZiBzp
SO close to getting Magisk to install, any reason the refuses to flash the boot partition? I used the stock boot.img and had Magisk patch it before I flashed
SO close to getting Magisk to install, any reason the refuses to flash the boot partition? I used the stock boot.img and had Magisk patch it before I flashed
jAm-0 said:
SO close to getting Magisk to install, any reason the refuses to flash the boot partition? I used the stock boot.img and had Magisk patch it before I flashed
Click to expand...
Click to collapse
You have to flash magisk in twrp recovery NOT bootloader mode.
It's right in the OP from the rooting guide you followed:
Do not set up a password if you are on 8.1 twrp doesn't work.
You need to read through that rooting guide and make sure you know what you're doing before you try.
This phone is easy to hard brick and there is no solution to recover from that.
OREO 8.0/8.1
REQUIREMENTS:
An unlocked bootloader.
A working ADB/Fastboot environment on your computer. Knowledge on how ADB and Fastboot works is also preferred.
The stock boot image for whatever build you're running/trying to root.
The latest TWRP build for our device.
If on 8.1, remove your pin/pattern/passcode until the root process is done.
1. Download both the stock boot image for whatever build you're running and the Magisk or SuperSU zip. Transfer both files to your device's internal storage.
2. Reboot your phone into the bootloader, then open up your command prompt or terminal and flash the latest TWRP build for the device using:
Code:
fastboot flash boot twrp.img
3. Once TWRP has finished flashing, reboot into your recovery. When prompted, enter your pattern/passcode/password to decrypt your data in order to gain access to your internal storage.
4. Once you're in TWRP, install the stock boot image and then the Magisk/SuperSU zip.
5. Whenever Magisk/SuperSU finishes installing, simply reboot your device! You should now be rooted.
*NOTE: TWRP will NOT remain installed on your device.
wolfu11 said:
You have to flash magisk in twrp recovery NOT bootloader mode.
It's right in the OP from the rooting guide you followed:
Do not set up a password if you are on 8.1 twrp doesn't work.
You need to read through that rooting guide and make sure you know what you're doing before you try.
This phone is easy to hard brick and there is no solution to recover from that.
OREO 8.0/8.1
REQUIREMENTS:
An unlocked bootloader.
A working ADB/Fastboot environment on your computer. Knowledge on how ADB and Fastboot works is also preferred.
The stock boot image for whatever build you're running/trying to root.
The latest TWRP build for our device.
If on 8.1, remove your pin/pattern/passcode until the root process is done.
1. Download both the stock boot image for whatever build you're running and the Magisk or SuperSU zip. Transfer both files to your device's internal storage.
2. Reboot your phone into the bootloader, then open up your command prompt or terminal and flash the latest TWRP build for the device using:
Code:
fastboot flash boot twrp.img
3. Once TWRP has finished flashing, reboot into your recovery. When prompted, enter your pattern/passcode/password to decrypt your data in order to gain access to your internal storage.
4. Once you're in TWRP, install the stock boot image and then the Magisk/SuperSU zip.
5. Whenever Magisk/SuperSU finishes installing, simply reboot your device! You should now be rooted.
*NOTE: TWRP will NOT remain installed on your device.
Click to expand...
Click to collapse
I realize all that, the issue is I cannot access any sort of recovery because I think my bootloader is defective.
For example from a cold restart if I press the power button for say 3 -5 seconds it wont boot, just boot to the Essential logo and loop. To get the phone to boot I have to hold the power down for 15-20 seconds while it bootloops a couple times then it'll boot.
Is there a possible way to reflash the bootloader software if it is defective? It's unlocked btw
There is a way to install magisk via fastboot with a patched_boot img which I'm working on. Cant seem to find the right boot img to patch for 8.1
PS Is it possible to flash .zips through fastboot? e.g. custom roms etc
Was finally able to get into recovery, so all is well. Thanks for the help yall
OP, what was your process to successfully get into recovery and fix your problems?
It may help others sometime?
gimpy1 said:
OP, what was your process to successfully get into recovery and fix your problems?
It may help others sometime?
Click to expand...
Click to collapse
It's really hard to say, my phone has a serious problem with it. sometimes I cant get it to boot, it will boot into the bootloader over and over and over. I've managed to get Lineage 15.1 on if for a bit until I tried to get back into the recovery which sent it manic.
I just got lucky I was able to get into TWRP and flash lineage.
my first issue not being able to flash the stock image via fastboot because I didn't unlock_critical which can sometimes fail when the usb connection is bad.
Currently flashing stock again if my phone will boot up. I'm not sure whats wrong with my bootloader but its causing a ton of havoc
My essential phone stuck in boot logo,bootloader work but recovery doesn´t work
Bootloader locked.
Oem unlocking disable.
Usb debugging disable.
How to flash stock recovery or twrp on bootloader locked ? please
Thank you!
katastyle971 said:
My essential phone stuck in boot logo,bootloader work but recovery doesn´t work
Bootloader locked.
Oem unlocking disable.
Usb debugging disable.
How to flash stock recovery or twrp on bootloader locked ? please
Thank you!
Click to expand...
Click to collapse
Same boat for me - just keep rebooting to show Powered by Android Screen and then reboot again and again. Was able to see my device using fastboot devices command but all attempts to access recory just repeat the bootloop entry. I would happily check the OEM UNLOCK option in dev settings but can't even get it to book to any OS to make that option happen. Still shows bootloader locked on bootloader screen - any help someone can suggest?
I had this problem tonight also. In my case I suspect it had to do with the install of magisk in which I checked both boxes and patched the bootloader. on reboot I was stuck on boot. Just wanted to add my solution. I got the pie back to stock zip here https://forum.xda-developers.com/essential-phone/development/stock-7-1-1-nmj20d-t3701681 then I put it into the adb folder and ran the flashall.bat script. I tried the no wipe one and it saved my information. very happy I didnt have to resetup my phone in the end.
katastyle971 said:
My essential phone stuck in boot logo,bootloader work but recovery doesn´t work
Bootloader locked.
Oem unlocking disable.
Usb debugging disable.
How to flash stock recovery or twrp on bootloader locked ? please
Thank you!
Click to expand...
Click to collapse
I am in the same boat. I tried to re-install the OS, but because my USB debugging was not enabled, Fastboot worked but ADB would not and since I basically wiped the recovery area, my phone will only boot into Fastboot but will not allow any loading of recovery. I would pay for someone to help. This is so hard to figure out. I have contacted Essential but since my phone is over 12 months old, the warranty has expired.
Help please. It seems like such a waste to have a bricked phone.
So I gave my IMEI, serial number and $5 to someone on the internet, and in return I got an email attachment to flash to my phone. So I did, and it unlocked the bootloader. Strangely enough, now I'm getting a stupid yellow message that my device is unlocked and can't be trusted, and it's a bit of a roundabout way to get into bootloader or recovery. One ONLY works with buttons, the other ONLY with adb.
Ok, never mind, so I tried installing both the 3.1.1. and 3.2.1 of TWRP custom recovery, but I am unable to boot into it to make it stick. On top of that, my phone now says "encrypted"? WTF?
Clearly this latest incarnation of Nokia is a bunch of asswipes, offering us Sophie's choice instead of just unlocking the damn things from the start, so there's no point in asking them for help, but I'd expect members here would be able to help?
Any ideas how to proceed? Is there a factory ROM somewhere? This is 7.1.2. by the way, I'm not interested in updating. Come to think of it, I hate this so-called "progress" with convoluted "security" and whatnot. Just give me the damn phone and go away, Google+Nokia. Stick your "features" up ya clacker.
1. Okk first you jeed to go this link and download official recovery for nokia 5 running android 8.1 oreo
https://drive.google.com/file/d/1Cl1...w?usp=drivesdk
2. Rename it to twrp and give the command to flash the recovery.
3. After give command fastboot flash recovery twrp.img. Give the command fastboot boot twrp.img
And boooom you enter in official twrp
Jitender Baloda said:
1. Okk first you jeed to go this link and download official recovery for nokia 5 running android 8.1 oreo
https://drive.google.com/file/d/1Cl1...w?usp=drivesdk
2. Rename it to twrp and give the command to flash the recovery.
3. After give command fastboot flash recovery twrp.img. Give the command fastboot boot twrp.img
And boooom you enter in official twrp
Click to expand...
Click to collapse
Link broken. File doesn't exist
Try this
https://drive.google.com/file/d/1Cl1yV7tV_VsIC3XIWlCIJXmFfdDZGUbG/view?usp=drivesdk
Err... no, not quite.
1. Your link is (was) dead, but in any case I'd be wary of installing something stashed in a private Google drive folder... Thanks, but no thanks.
2. I have several versions of TWRP, that's not a problem.
3. I know the correct commands (yours are not), that's not a problem.
And boom - no, you don't end up in TWRP. You end up in system, because it overwrites the TWRP automatically UNLESS you reboot to it immediately after flashing, and THIS is the problem.
It turns out that Nokia needs to be plugged into CHARGER, not the PC, then holding Vol+ and Power button combination will do it. It took me more than a dozen tries, but it worked in the end.
Hi, I had the same problem. I've unlocked bootloader and I successfully installed TWRP and I can go to recovery but the problem is I can't boot the system as it stucks on download mode. Can you help?
Press volume up+volume down+power button at the same time for 7-8 second.
I stupidly tried using franco's app to flash cleanKernel on my rooted phone on 9.0.11, it failed of course and now can't boot my phone. I'm able to fastboot boot twrp.img but I'm not sure what is needed next. I've downloaded the full 9.0.11 ota file thinking something in it (or all of it) needs to be flashed from twrp. Afraid to do anything at this point for fear of losing data. Any tips are appreciated.
I've downloaded mauronofrio's rom-stock-fastboot utility but see he says it will clear data. I'm assuming all the .bat files will do this. Any way to avoid clearing internal storage?
soundneedle said:
From bootloader screen, using fastboot boot twrp.zip results in OP going to "Fastboot Mode" screen...and staying there. The zip is pushed to the phone but won't boot into TWRP. This started after I stupidly tried using franco's app to flash cleanKernel on my rooted phone. It failed of course and now can't boot my phone. My phone recently updated itself to 9.0.11, fyi.
Any ideas on how to fix this boot issue? Is it just a matter of flashing something from the full ota 9.0.11 file---some img file or something?
Click to expand...
Click to collapse
Wouldn't you want to be using a twrp.img not .zip?
fastboot boot twrp.img
Boot twrp from the img and then flash the zip once twrp boots?
I was able to recover...thank god. Just used mauronofrio's flash utility. Removed the "-w" flag from the flash-all.bat file and all is good.
Stuck on Fastboot Mode screen once I run fastboot boot twrp.img
bp328i said:
Wouldn't you want to be using a twrp.img not .zip?
fastboot boot twrp.img
Boot twrp from the img and then flash the zip once twrp boots?
Click to expand...
Click to collapse
Hi, I have just got a OnePlus 6T and I am getting this same error even though I am using the twrp.img - when I run fastboot boot 'twrp.img' it sticks on the Fastboot Mode screen.
I have the .zip on the phone's internal storage along with Magisk ready to install but I can't get there.
I did manage to get into Recovery once in the last 3 hours but under Advanced the only 2 options I have are to reboot to fastloader of reboot to recovery which just takes me round in circles!
Have tried everything I can find/think of right now and am no further down the line
Any help guidance will be greatly recieved as nothing I can find on the threads here seem to help
Thanks
s
Is the twrp.img even being flashed
SimmoMaz said:
Hi, I have just got a OnePlus 6T and I am getting this same error even though I am using the twrp.img - when I run fastboot boot 'twrp.img' it sticks on the Fastboot Mode screen.
I have the .zip on the phone's internal storage along with Magisk ready to install but I can't get there.
I did manage to get into Recovery once in the last 3 hours but under Advanced the only 2 options I have are to reboot to fastloader of reboot to recovery which just takes me round in circles!
Have tried everything I can find/think of right now and am no further down the line
Any help guidance will be greatly recieved as nothing I can find on the threads here seem to help
Thanks
s
Click to expand...
Click to collapse
When I think about it, it seems that the twrp.img I am flashing is not taking. When I go into recovery I get to choose 1 of 3 languages, I choose English and then I just get the 2 options as above - thing is, the font, layout etc. make it look like stock recovery and nothing like TWRP I have used before, no TWRP logo etc. Nothing
SimmoMaz said:
When I think about it, it seems that the twrp.img I am flashing is not taking. When I go into recovery I get to choose 1 of 3 languages, I choose English and then I just get the 2 options as above - thing is, the font, layout etc. make it look like stock recovery and nothing like TWRP I have used before, no TWRP logo etc. Nothing
Click to expand...
Click to collapse
Ok.. can you get into TWRP? Is so reflash the stock rom.. the once it has flashed do not reboot, go back to install and flash the lastest twrp .zip do not reboot, go back to install and flash/install magisk, once it installs then reboot to system... It will take a bit... Once it reboots check your Magisk manager you may need to reinstall it, reboot to TWRP and reflash it.. reboot to system band you should be good to go...
TWRP isn't there
lilbrat said:
Ok.. can you get into TWRP? Is so reflash the stock rom.. the once it has flashed do not reboot, go back to install and flash the lastest twrp .zip do not reboot, go back to install and flash/install magisk, once it installs then reboot to system... It will take a bit... Once it reboots check your Magisk manager you may need to reinstall it, reboot to TWRP and reflash it.. reboot to system band you should be good to go...
Click to expand...
Click to collapse
Thanks and apologies if a two posts appear from me, I submitted one about 20 minutes ago and it isn't showing.
The issue is more than that, even when I try to flash the TWRP image it doesn't seem to take. The phone gets stuck on the 'Fastboot Mode' OnePlus flash screen and hangs there.
I have to hold the power and vol+ keys to get the device to restart and I then receive a message saying 'bootloader unlocked, data insecure etc.' and to press the power to stop the boot process. If I leave it the phone boots into OOS10.3.3.
If I press the power button I can get to recovery mode (albeit there is a password screen there which I have never seen on other devices I've had). I put my password in and choose English. I am then given the two options; reboot to fastboot or reboot to recovery. There is no advanced option to allow me to install TWRP or Magisk zips, as a matter of fact I don't get any TWRP at all, it looks like stock recovery.
Is the phone defaulting to stock recovery and not the TWRP image? That is what, in my very non-expert opinion seems to be happening. Is that possible and if so, any ideas how to fix?
I have completely flashed the phone so it is on stock OOS (10.3.3.) so can start afresh. It is a refurbed 'like new' so could that have anything to do with it?
Thanks for reading the long post - am wondering if there are some other tools I need use to change how it boots?
S
SimmoMaz said:
Thanks and apologies if a two posts appear from me, I submitted one about 20 minutes ago and it isn't showing.
The issue is more than that, even when I try to flash the TWRP image it doesn't seem to take. The phone gets stuck on the 'Fastboot Mode' OnePlus flash screen and hangs there.
I have to hold the power and vol+ keys to get the device to restart and I then receive a message saying 'bootloader unlocked, data insecure etc.' and to press the power to stop the boot process. If I leave it the phone boots into OOS10.3.3.
If I press the power button I can get to recovery mode (albeit there is a password screen there which I have never seen on other devices I've had). I put my password in and choose English. I am then given the two options; reboot to fastboot or reboot to recovery. There is no advanced option to allow me to install TWRP or Magisk zips, as a matter of fact I don't get any TWRP at all, it looks like stock recovery.
Is the phone defaulting to stock recovery and not the TWRP image? That is what, in my very non-expert opinion seems to be happening. Is that possible and if so, any ideas how to fix?
I have completely flashed the phone so it is on stock OOS (10.3.3.) so can start afresh. It is a refurbed 'like new' so could that have anything to do with it?
Thanks for reading the long post - am wondering if there are some other tools I need use to change how it boots?
S
Click to expand...
Click to collapse
Ok.. are you using the latest TWRP? If you want in the guide section you can you the msmdow like ad tools to reset you phone to stock, and retry again..
THIS. I have the exact same issue. In short, I have the T-mobile version, and was able to unlock successfully. I am using twrp-3.2.3-0, and I have the img and zip in the same folder, same way Techibee does on Youtube. I then type "fastboot boot twrp-3.2.3-0-fajita.img", I get the "OKAY... OKAY... Booting... Finished" response in console. Then, the Fastboot screen appears and never leaves. I have done this 3 times now. I kept tweaking the process, but I'm nervous to keep debugging.
Stuck (
Hello guys,
I wanted to overclock my 6t global. so i had unlocked the bootloader then flashed the twrp. In twrp i firstly reset the os to factory setting and then i flash magisk and smurf kernel. but when i reboot after this my phone is stuck on the phone unlocked message.
ive tried flashing magisk only and then boot, it works. but when i flash smurf kernel i get stuck . why this happening plz help (