Database Users

Can't install SE companion drivers for X10

System configuration: X10 (R2BA020), Win7 x64 (english), SE PC Suite 2.00.142
Suite installed without any error messages. When I connect the phone via USB, Windows is searching for drivers but can't find one which matches with the device.
I've tried it manually via device manager (Other devices: X10i) and used for the update-driver-wizard the path to the driver folder (program files\SE...\drivers), but no matches...?!?!
I can see two entries with USBDeview:
Vendor ID:0fce
Device ID: 212e and 313e (Debug and no-Debug Mode)
Device class: Smar
Device type: unknown
Description: SEMC Mass storage USB device
The drivers are digitally signed by MS, so what's the problem?

[Q] my journey to try and develop with an htc aria

Hi,
I have two small apps that I have devleoped using eclipse and the emulator. Now I want to use eclipse and my htc aria.
I followd the sdk's directions for downloading the usb driver and I now have a folder named "usb_driver" in my sdk. However, windows can't find a driver for the htc aria in that folder.
THe next thing that I tried was to use "HTC sync" from HTC. However, I can't even get HTC sync to work all. MY aria can't find HTC sync on my VIsta compter. After digging into this, I found that windows gets an error when it tries to run the htc sync driver. This is detalied below:
Device Manager:
Android USB Devices: My HTC
Device status: Windows cannot initialize the device driver for this hardware. (Code 37)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
Description:
Windows was able to successfully install device driver software, but the driver software encountered a problem when it tried to run. The problem code is 37.
Problem signature:
Problem Event Name: PnPDeviceProblemCode
Architecture: x86
Hardware Id: USB\VID_0BB4&PID_0C92&REV_0100&MI_01
Setup class GUID: {f72fe0d4-cbcb-407d-8814-9ed673d0dd6b}
PnP problem code: 00000025
Driver name: ANDROIDUSB.sys
Driver version: 2.0.7.1
Driver date: 06-10-2009
OS Version: 6.0.6000.2.0.0.256.6
Locale ID: 1033
I am at wits end. It seems that a USB driver for the HTC aria isn't ready yet from the android download site and the drivers from HTC won't work on my computer.
Has anyone else seen anything like this? Is there another way that I can run my apps on my phone?
Thanks,
mhuman1

You may need to manually add a couple of lines to the driver .inf
I did this for an incredible. Search google for "htc incredible usb driver" and use the aria usb pid/id

I modified the driver's inf file like suggested abobe with the following additional text in the two indicated places and now my phone shows up using the "adb devices" command. It shows the serial number of my htc aria.
;HTC Aria
%SingleAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C92&REV_0100
%CompositeAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C92&REV_0100&MI_01
However, I still can't access the phone from eclipse. Do i still need to do more setup in eclipse?
Thanks,
mhuman1

Htc Aria shows up in DDMS but not as project target
HI,
Now my HTC Aria shows up under the DDMS perspective with its serial number, but I don't know how to make eclipse launch my application on the phone I think that I must be overlooking something really silly.
Thanks,
Keith

Trying to update my Omnia7

When installing the driver (6 of 10 process) I get a cannot install driver error...then the entire WP7 update fails. I checked the events viewer, I found this log.
Log Name: Application
Source: WPDMTPDriver
Date: 22.Feb.11 6.59.27 AM
Event ID: 14000
Task Category: (16)
Level: Information
Keywords: Classic
User: N/A
Computer: kiebzs_Qosmio
Description:
The description for Event ID 14000 from source WPDMTPDriver cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
MTP WPD Driver
Any way to resolve this? Using Windows 7 Ultimate 32 bit. TY

^ My W7 64-bit installed a Samsung I8700 driver at that point (and I had to restart the update)

"T-Mobile myTouch 3G Slide USB Device" drivers WTF !!!1111

RESOLVED
* usb tether works find in linux ( so #$%^ you windows )
* all other usb devices work in windows
* I have always had issues with android and drivers ...( G1 and Mytouch on multi computers USBDeview shananigans etc ... )
* I tried the latest USB drivers from android SDK 03/9/2011
* I assume the tetherxp.inf does not display a new connection in networking becuse I can't get the driver installed in the first place ....
* the Vista_x86 drivers let me install them ( forcefully ) but mass storage or tether do not work
* used USBDeview to remove all USB devices etc no luck
* tried htcsync2.0.35 with no luck
* also tried move the c:\windows\inf\*.pnf files ( aparently the driver cache for windows of the inf files gets stored in this binaryish file )
* info from USBDeview:
==================================================
Device Name : myTouch 3G Slide
Description : T-Mobile myTouch 3G Slide USB Device
Device Type : Communication
Connected : No
Safe To Unplug : No
Disabled : No
USB Hub : No
Drive Letter :
Serial Number : HT077PS03496
Created Date : 3/9/2011 4:05:25 PM
Last Plug/Unplug Date: N/A
VendorID : 0bb4
ProductID : 0e04
Firmware Revision : 1.00
USB Class : 02
USB SubClass : 02
USB Protocol : ff
Hub / Port :
Computer Name :
Vendor Name :
Product Name :
ParentId Prefix : 7&2ef1d971&0
Service Name :
Service Description:
Driver Filename :
Device Class :
Device Mfg :
Power :
Driver Description:
Driver Version :
==================================================

http://member.america.htc.com/download/Driver/T-Mobile_myTouch_Slide/HTCSync2.0.35.exe
Download and install

that link does not work jsut send you in a endless loop of selecting project and download
* I think all the compuers thath ave the G1 drivers on them wont work or something ... works fine on clean XP box ..
* http://www.mediafire.com/?79do98stfn065ep#
* reboot both phone
THANKS ! normal USB drivers work fine etc... so its eomthign with old drivers from G1 I think !?! did not work on 2 computers win7 and xp but my wifes worked fine ..

yeah i noticrd as soon as i went to linux everything decided to work without the drivers....so agreed..F*** windows

If u download pdanets pc counterpart after you've removed the addl usb devices from device manager. It will walk u thru a quick easy adb driver install thing and all is well.

Windows 10 USB Help Request - Device Descriptor Failed

Howdy,
Ok, I'm one of those who are having issues connecting my Nexus 6P to my Windows 10 PC. I've tried the usual fixes (I'll enumerate what I've done below) but right now where I'm in the state where Device Manager shows the Nexus 6p under the Universal Serial Bus controllers. Shows up as:
Unknown USB Device (Device Descriptor Request Failed)
Device status is:
"Windows has stopped this device because it has reported problems. (Code 43)
A request for the USB device descriptor failed."​Properties -> Details -> Hardware Ids = USB\DEVICE_DESCRIPTOR_FAILURE​Ok, what I have tried:
1) Settings -> Developer Options -> Select USB Configuration = MTP (I have tried all options here, no change to above)
2) Settings -> Developer Options -> USB debugging = On (I have tried both on and off)
3) Using the USB A to USB C cable which came with the phone
4) Tried multiple USB ports on multiple PCs, no difference
5) NOT seeing the USB configuration type in the notification pulldown so I can not comment on that
6) I have factory reset the phone
7) Tried to update to the latest Google USB Driver.. Unable to... Experience is:
- Steps performed: Device Manager -> Update Driver Software -> Browse Computer -> Navigate to Directory (yes, include subfolder is checked).
- Outcome: Windows tells me the Best Driver software is already installed​- Second attempt: Device Manger - Update Driver Software -> Browse Computer -> Let me pick from a list of device drivers
- Outcome: No driver with Android, Google or Nexus shows​8) I have tried a couple of the universal USB drivers but none look to work
Is there anything else I can try? I am starting to wonder if there is a hardware error on my phone.

I have windows 10 and I've never had problems. When I plugged in my device my computer recognized it right away.
Sent from my Nexus 6P using Tapatalk

Have you tried to install ADB with the universal installer found somewhere on XDA, which also installs the Google drivers and see if your device is detected?Can you try it on a different PC to rule out the cable being problematic?

Might go down the path of updating the drivers for your motherboard. Especially USB 3. I've had that same error from outdated drivers on windows 8.1 and the htc m7. I actually had to use drivers from a different manufacturer but for the same chipset.

Went on vacation shortly after the last response and trying the suggestions now. Still no luck. I am starting to wonder if there is something shorted out on the phone. Is there any way to do a sanity check?
Since the last response I have tried:
Repeated the behavior on 2 different PC's
Updated all firmware on my laptop. I have connected a Moto X to this laptop in the past but do not have access to that device anymore.
Tried the Naked Driver
Tried the PDANet driver
Ran through the steps on the Diagnosing USB Driver thread
I have only tried this with 2 cables. One is the cable the phone came with. The other is a cable that Leung says does not work correctly (bought before I saw him reviewing. wondering if this did damage to my phone)
Anything else I could try? That or is there a way to test the hardware?