Database Users

Root S3 i9300l (XXUANF4) latest kitkat

Until now this firmware I9301IXXUANF4
was unrootable, because towelroot didn't recognize the device, since the kernel has been patched.
I made it to root, by simply downgrading the kernel to the older version XXUANC6 dated 22 march, as @geohot says on his site " .. should support all phones < jun 3 2014
click the lambda, install the apk
run towelroot"
that was just a simple thought I had today. to grab the older firmware and flash the older kernel over the new firmware.
The procedure is simple. update normally to the latest firmware either with OTA or odin, as you wish.
Then go into download mode and flash the kernel dated 22 march from XXUANC6 and reboot.
apply towelroot like normal
if you want the new kernel flash the XXUANF4 kernel. or stay with the older kernel. your choice. Enjoy.
A link to a shared folder in dropbox https://www.dropbox.com/sh/2rk7486qwbgkc2z/AAB6RuO1xmCoHY_nw1i4XJMIa?dl=0
Hopefully this device gets more attention!

I think, there is no benefit to root the mobile.

sk1887 said:
Until now this firmware I9301IXXUANF4
was unrootable, because towelroot didn't recognize the device, since the kernel has been patched.
I made it to root, by simply downgrading the kernel to the older version XXUANC6 dated 22 march, as @geohot says on his site " .. should support all phones < jun 3 2014
click the lambda, install the apk
run towelroot"
that was just a simple thought I had today. to grab the older firmware and flash the older kernel over the new firmware.
The procedure is simple. update normally to the latest firmware either with OTA or odin, as you wish.
Then go into download mode and flash the kernel dated 22 march from XXUANC6 and reboot.
apply towelroot like normal
if you want the new kernel flash the XXUANF4 kernel. or stay with the older kernel. your choice. Enjoy.
A link to a shared folder in dropbox https://www.dropbox.com/sh/2rk7486qwbgkc2z/AAB6RuO1xmCoHY_nw1i4XJMIa?dl=0
Hopefully this device gets more attention!
Click to expand...
Click to collapse
You are in the wrong area, this is your device section
http://forum.xda-developers.com/galaxy-s3-neo

Darke5tShad0w said:
You are in the wrong area, this is your device section
http://forum.xda-developers.com/galaxy-s3-neo
Click to expand...
Click to collapse
There weren't any s3neo section back then. A mod should move the topic, please.

[Need Urgent HELP] Trying to update a G900F (G900V)

Hi, I bought a "new" s5 from someone on Gumtree.
I am in the UK (England) and use EE network.
The phone seemingly works fine and I did checks to see it's not a fake, but it's on the the old Lollipop version. I want to update to the most recent firmware Marshmallow, but can't.
When I press the "Update now" in "About Device", nothing happens.
I tried to use my PC and update via Kies 3, but it says I have the latest firmware available for my model.
Can anyone please tell me if I can update my phone to Marshmallow? How do I do it? I'm kind of desperate.
I have read a bit about this Odin application and have downloaded it. Would anyone be so kind as to direct me to the firmware I would need and if it's safe?
Thanks a lot.
I've attached a couple of pics of screens I took from of my phone.
One has info from an app I downloaded onto the phone, called "Phoneinfo"
*Edit - I'm not allowed to post links yet, as I'm a new user.
Basically
Phoneinfo states -
Manufacturer/Brand = Samsung / Verizon
Phone Model = SM - G900F
Device Type, Product Name = kltevzw
About Device state -
Android Version = 5.0
Baseband Version = G900FXXU2BOG5
Hardware Version = G900V.05
Security Software Version = MDF v1.1 Release 4
KNOX Version = 2.3
Standard SDK 5.3.0
Premium SDK 2.3.0

Google the Verizon PD1 .tar file (it may be in a zip file) and Odin that in the AP slot. That'll give you stock marshmallow.
Sent from my XT1650 using Tapatalk

SoccerRef12 said:
Google the Verizon PD1 .tar file (it may be in a zip file) and Odin that in the AP slot. That'll give you stock marshmallow.
Sent from my XT1650 using Tapatalk
Click to expand...
Click to collapse
Hi, ok I did as you advised and it worked.
I have Marshmallow and it recognises my 4g lte.
When I switch the phone on and it loads up the home screen, a message comes up saying the Sim card is not Verizon etc, but after a minute, the "H" turns to "4Glte" and it works perfectly fine.
Thanks for your help!

The latest stock for G900V is PL1 which you can find here: https://www.androidfilehost.com/?fid=529152257862693698
Use ODIN on AP slot as before.

Patched Odin 3.13.1

For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around.
I patch recent Odin versions to offer similar functionality to the princecomsy; in that it ignores both the sha256 fails and the model mismatches.
- Developed and successfully tested for my verizon samsung s8 g950u to g950u1 and combination firmware packages.
- Confirmed working on an unlocked S9+ g965U1 to VZW g965u
- additional confirmation: G950w from G950u
- able to flash T727R4 firmware to T727V
- confirmed working with S21 5G from G991U to G991U1
- flashed G998U VZW to G998U1 XAA
- confirmed S22 S901U VZW to S901U1 XAA
- successful S23 S911U XAU to S911U1 XAA
Ignores and bypasses the below stop conditions:
"FAIL! Model mismatch fail" (all PatcheD versions)
"FAIL! SHA256 is invalid" (all PatcheD versions)
"FAIL! Blocked carrier" (PatcheD versions >= 3.14.1)
Be careful flashing!
+20180313 - Added Stock odin 3.13.1 sourced from pedant87 / Added PatcheD odin v3.13.1
+20191211 - Added PatcheD v3.13.3 and original 3.13.3 for windows, Merry Christmas!
+20191218 - Added the only clean and original v3.14.1 for windows
+20200216 - Added ModdeD/PatcheD 3.14.1 for windows! Supports newer phone flashing methods. A new check method for a carrier flash halt has been removed!
Caution #1 - There are many stock/mod/patch copies floating around the internet with redirected links and other misleading claims and changes. The XDA links below are the only source for clean originals and the original 3B files.
Caution #2 - All v3.14.4 are hoax/fake versions of odin. It is version 3.14.1; same filesize (and one other variant in size, due to larger resource changes). All have internal resource modifications to report 3.14.4. Often includes a known cloud-based client-server communication dll (cpprest141_2_10.dll). I suggest that it be avoided. It adds no additional functionality over 3.14.1. See post here for more detail.
When you donate, and this work was helpful to you, do consider donating to this effort by using the DONATE HERE link. Thanks for your support!
¡BBB!
Walking Domestic

Thanks, thought my firmware was bad since it wouldn't flash with the previous odin. This worked perfect. I used this to flash my galaxy s9+ from U1 to VZW.

Thanks. I wanted to firmware back to G950w from G950u using Oreo and found it. Really appreciate your hard work

I gotta give a huge thank you for this program, man! I was able to flash from the SM-G955U firmware on Verizon to the Unlocked USA (SM-G955U1) firmware running the Official Oreo build.

Please Help
Hey please help me out i want to bypass my google account in my G950U i have downloaded your patched Odin but i'm facing an issue after file analys and setup connection its just showing success 0/ failed 1 please Help me out.
Please Please Please help me out...
Contact me:

Serxyne said:
I gotta give a huge thank you for this program, man! I was able to flash from the SM-G955U firmware on Verizon to the Unlocked USA (SM-G955U1) firmware running the Official Oreo build.
Click to expand...
Click to collapse
did you have to switch the software/retail code or did you just do a straight flash?

realbbb said:
For those looking for a patched odin 3.13.1 version that is a newer build than all the renamed prince comsy 3.12.3 versions floating around.
I patched the latest Odin to offer similar functionality to the princecomsy patch; in that it ignores both the sha256 fails and the model mismatches.
- Developed and successfully tested for my verizon samsung s8 g950u to g950u1 and combination firmwares packages.
- Confirmed working on an unlocked S9+ g965U1 to VZW g965u.
- additional confirmation: G950w from G950u
Attached is the latest patched odin3 v3.13.1 windows version and the original odin v3.13.1 windows and mac version.
Official v3.13.1 Changelog
-Support for compressed binary files (LZ4)
-Support for Android O (Oreo)
-Implement 80 ports Mass D / L
-DVIF for Mac bundle
Be careful flashing!
¡BBB!
Walking Domestic
Stock odin sourced from pedant87
Click to expand...
Click to collapse
I had the 950U..squ2cra1 firmware on my unlocked S8 and could not use the new Odin 3.13.1 until I used the one patched by you.
Thanks a lot for your help!

Thanks Man
Just Flashed N950U1 (XAA) to My N950U (TMB)
it worked perfectly
Thanks

Solid work! Thanks for the patched version

Hey mate,
Just a quick question / concern .. Just ran an analysis on your file here -> https://www.reverse.it/sample/89c6e56e97d68c1f73ca6c5438cfe68a0e36d626d4c41ba04c9065d06bd193de
While I can't see too many differences after unzipping your exe and running a comparison with a hex editor against your original odin you provided .. still the online analysis results do make me ask the question
"please explain?"
Online analysis of your original odin provided is here -> https://www.reverse.it/sample/370b97504c91f5965abe69db11576a78370674f363460fa5fe15fff783fa0d35

Eudemony said:
Hey mate,
Just a quick question / concern .. Just ran an analysis on your file here -> link
While I can't see too many differences after unzipping your exe and running a comparison with a hex editor against your original odin you provided .. still the online analysis results do make me ask the question
"please explain?"
Online analysis of your original odin provided is here -> link
Click to expand...
Click to collapse
Please note that Eudummy did not run reverse it on the OP attached executable file. The sha256, executable type, and file size do not match the file he tested at his provided link. I am wondering why he would test a different file with the same filename? Just a plug for reverse it? Anywho... To help calm others...
The patches/changes are:
Operationally I patched as indicated in the OP (encryption and model fails).
All other changes are visual. ie. main graphic bar, version code, and url text/address.
That is it. Simple and has helped many to flash their phones!
¡realBBB!
Not Your Mate

I try to download Odin3 v3.13.1_3B_PatcheD.zip but it just brings me back on this thread.. It doesn't download. The other file downloads fine.

volt26 said:
I try to download Odin3 v3.13.1_3B_PatcheD.zip but it just brings me back on this thread.. It doesn't download. The other file downloads fine.
Click to expand...
Click to collapse
Link works for me. Downloads immediately. Try another browser.
BBB
Tired Foul
Sent from my XT1254 using Tapatalk

Very good work
Very good ... Keep sharing

Hi,
I got an SM-G950F with CRED firmware.
I'm trying to OEM unlock it but option is missing from dev settings.
I tried using 3.13.1 BBB Odin to flash a Nougat firmware but it all fails. Tried to reboot into download mode and hit start several times but they all fail.
Is there any other way I can get OEM Unlock to become available? Trying to flash TWRP and root on a new phone.

Bitcoin address??
realbbb said:
For those looking for a patched odin 3.13.1 version that is a newer build than all the renamed prince comsy 3.12.3 versions floating around.
I patched the latest Odin to offer similar functionality to the princecomsy patch; in that it ignores both the sha256 fails and the model mismatches.
- Developed and successfully tested for my verizon samsung s8 g950u to g950u1 and combination firmwares packages.
- Confirmed working on an unlocked S9+ g965U1 to VZW g965u.
- additional confirmation: G950w from G950u
Attached is the latest patched odin3 v3.13.1 windows version and the original odin v3.13.1 windows and mac version.
Official v3.13.1 Changelog
-Support for compressed binary files (LZ4)
-Support for Android O (Oreo)
-Implement 80 ports Mass D / L
-DVIF for Mac bundle
Be careful flashing!
¡BBB!
Walking Domestic
Stock odin sourced from pedant87
Click to expand...
Click to collapse
Hey, If you have a BTC address add it to the original post. I am sure people want to donate. =-)

Gratitude
Thanks!
I just used this unpatched Odin to update an S7 G930W to latest 8.0 Samsung official release successfully.

Hello, can you make it for note 7 ? I tried but failed , I want to flash an official firmware, in order to remove OEM lock. I can't use my phone plz help me! Thanks you in advance

many thanks for the well-done patch..much appreciated

N950F?
Does Anyone Know If this will work on my SM-N-950F ?

Sm-G930VL stock image need please. build G930VLUDU4DRE3

Hey people, Im looking to get the stock image file for my cell. I can find it anywhere! This is my build: g930vludu4dre3
Thanks!!!

hondais1 said:
Hey people, Im looking to get the stock image file for my cell. I can find it anywhere! This is my build: g930vludu4dre3
Thanks!!!
Click to expand...
Click to collapse
I have a full stock firmware package (.tar archive) for the SM-G930VL TracFone/Net10/Straight Talk Galaxy S7. The firmware is recent and can be flashed using Odin v3.09 or later (for best results). If you still need the package, let me know. I'll upload it to my cloud hosting and get a direct URL posted very soon.

AeonFlux1603 said:
I have a full stock firmware package (.tar archive) for the SM-G930VL TracFone/Net10/Straight Talk Galaxy S7. The firmware is recent and can be flashed using Odin v3.09 or later (for best results). If you still need the package, let me know. I'll upload it to my cloud hosting and get a direct URL posted very soon.
Click to expand...
Click to collapse
I do

sdtqwe4ty said:
I do
Click to expand...
Click to collapse
Ok. I'll get the package uploaded to my cloud host and post a link as soon as it's ready.

AeonFlux1603 said:
Ok. I'll get the package uploaded to my cloud host and post a link as soon as it's ready.
Click to expand...
Click to collapse
Please also I need to

Ok, I actually found an Android File Host link for the TracFone/StraightTalk/Net10 firmware package for the SM-G930VL Galaxy S7. This package is actually Build No. G930VLUDU4BPL2_TFN4BPL2. I am very sorry for the misstatement. I had originally thought this was a recent build. However, I do have the most recent Verizon firmware package (SM-G930V), which will easily flash to the SM-G930VL using a current Odin version. This install will effectively convert the Net10/TracFone/StraightTalk Galaxy S7 to a Verizon Galaxy S7. There is an excellent conversion tutorial here in the device forums. (My own SM-G930VL was recently converted to the Verizon variant.) It also appears that the SM-G930VL can be readily converted to the factory unlocked variant by installing a recent unlocked firmware package w/PIT file via Odin.
Download Link:
SM-G930VL Firmware Package: https://androidfilehost.com/?fid=817550096634751351
Again, if any of you guys need it, I have the latest Oreo firmware package for the Verizon variant (April 1, 2019 Security Patches) Galaxy S7.

Thank you for sharing? I just flash it to the unlocked variant SM-G930U and works perfect

Mand0 said:
Thank you for sharing? I just flash it to the unlocked variant SM-G930U and works perfect
Click to expand...
Click to collapse
Glad to hear it. :good:

T387AAUCS3CUD1 Firmware for SM-T387AA (Samsung Galaxy Tab A)

Hi!
Does anyone know where I can find the T387AAUCS3CUD1 stock ROM? I'm trying to fix a unit that I may have messed up by tinkering with custom ROMs.

Anyone?

Still nothing?

Hi also searching high and low for T387AAUCS3CUD1.
Any success finding it?
Samsung Galaxy Tab A (T387AA) - Software Update for the Samsung Galaxy Tab A (T387AA) - AT&T
Get Samsung Galaxy Tab A (T387AA) support for the topic: Software Update for the Samsung Galaxy Tab A (T387AA). Find more step-by-step device tutorials on att.com.
www.att.com
ATT is worthless - no support. OTA Android 8 won't update to Android 10. Says already current.

No luck yet :-(

Still no luck.

Someone recently gave me a SM-T387AA, came across this thread while looking for the latest firmware for the device. It does appear that T387AAUCS3CUD1 is the latest for the AA version, which I also was unable to locate. (probably because ATT uses their own servers for firmware instead of samsung) However, while searching, I also came across a newer version of firmware for SM-T387W.
Specifically:
AP VERSION T387WVLS3CVK2
CSC VERSION T387WOYV3CVK2
CSC VTR (Canada)
ANDROID VERSION Q(Android 10)
SIZE 2.62 GB Full Files
MD5 d3b07faf990e6b33b55f5f39839799e4
BUILD DATE 20221114152111
SECURITY PATCH LEVEL 2022-06-01
To my surprise, I flashed the 387W firmware on my 387AA with ODIN and everything seems to be working just fine. Still can't unlock my bootloader though. I see there's also a 387R4 variant. I might try that next, and will report back if I do.

Would this not though prevent a user from being able to use it on AT&T?

scythe000 said:
Would this not though prevent a user from being able to use it on AT&T?
Click to expand...
Click to collapse
I popped in an ATT sim and calls/txt appear to be working.

Oh interesting, I wonder what the difference between the two firmware versions are then?

javadahut said:
Someone recently gave me a SM-T387AA, came across this thread while looking for the latest firmware for the device. It does appear that T387AAUCS3CUD1 is the latest for the AA version, which I also was unable to locate. (probably because ATT uses their own servers for firmware instead of samsung) However, while searching, I also came across a newer version of firmware for SM-T387W.
Specifically:
AP VERSION T387WVLS3CVK2
CSC VERSION T387WOYV3CVK2
CSC VTR (Canada)
ANDROID VERSION Q(Android 10)
SIZE 2.62 GB Full Files
MD5 d3b07faf990e6b33b55f5f39839799e4
BUILD DATE 20221114152111
SECURITY PATCH LEVEL 2022-06-01
To my surprise, I flashed the 387W firmware on my 387AA with ODIN and everything seems to be working just fine. Still can't unlock my bootloader though. I see there's also a 387R4 variant. I might try that next, and will report back if I do.
Click to expand...
Click to collapse
Got a link to where we can download it?

scythe000 said:
Got a link to where we can download it?
Click to expand...
Click to collapse
I used Bifrost. It can pull the latest firmware for most samsung devices that are hosted on samsung servers. Type in the model, "SM-T387W" and the CSC, "VTR", check for update and then download.
Bifrost link: https://github.com/zacharee/SamloaderKotlin