Related
Can't find any ones that I like so far. I know the edge makes things difficult but all the glass one I've seen don't have adhesive all over just along the edge and the film one i bought doesn't stay down on the edge so has anyone found a good one or decent one?
Please specify it's full coverage...glass or film...works with case and of so what case
flimflam06 said:
Can't find any ones that I like so far. I know the edge makes things difficult but all the glass one I've seen don't have adhesive all over just along the edge and the film one i bought doesn't stay down on the edge so has anyone found a good one or decent one?
Please specify it's full coverage...glass or film...works with case and of so what case
Click to expand...
Click to collapse
I try using the screen protector that came with the ghostek case I bought install it cover the entire front area of phone plus edges let set for about an hour try to put case on but everytime I did it would lift off the sides of the screen protector so I just took off the screen protector till I find that works. Also try the supershieldz ones same thing.
This is the one I am going to get https://www.amazon.com/dp/B01G7LQZW...TF8&colid=38DVAL1VV0RQM&coliid=I2N75A0MPNERT6
Omega Ra said:
This is the one I am going to get https://www.amazon.com/dp/B01G7LQZW...TF8&colid=38DVAL1VV0RQM&coliid=I2N75A0MPNERT6
Click to expand...
Click to collapse
I was thinking about that one but im not sure about the wet install. I'm good at putting screen protectors on but I've never did a wet install before...i May have to check it out
If you have some time and patience go for the Invisible Shield hd dry full body coverage. I originally ordered a Naked skin from slickwraps but its been processing since the 18th. So when my N7 arrived today I went on the search around town and ended up in a Verizon store. They kindly put it on for me, took two tries lol. Mid-install the Verizon guy just rips it and balls it up and went to grab another. When I got home I went through the packaging and noticed he skimmed me on the install. and didn't install the back.. I tell you what that was the worst torture in my life but hey pics below! Came out beautiful. +extra dbrand lens laying around conveniently . :good: winning
I put on a IQ shield matte. I like the matte finish but it is not for everyone. There is some lost clarity but much less glare and no fingerprints. I like the wet install for no bubbles and being easy. It takes some time to let the edges dry so they will stick. Let it sit at least overnight before using or putting on a case.
My case (Spigen Ultra Hybrid)did cause the corners to lift, a common problem with cases. IQ Shield has since come out with a "case friendly" updated version that is getting good reviews. I've got one on its way.
Phredeee said:
I put on a IQ shield matte. I like the matte finish but it is not for everyone. There is some lost clarity but much less glare and no fingerprints. I like the wet install for no bubbles and being easy. It takes some time to let the edges dry so they will stick. Let it sit at least overnight before using or putting on a case.
My case (Spigen Ultra Hybrid)did cause the corners to lift, a common problem with cases. IQ Shield has since come out with a "case friendly" updated version that is getting good reviews. I've got one on its way.
Click to expand...
Click to collapse
I ended up buying the skinomi matte screen protector which stuck on the edges perfect. Went without a case for a week and then put the spigen neo hybrid on which is my favorite case of all time and it peeled the corners still. I warmed the screen protector and was able to reform the corners a bit and it helped but i still want a problem free combination
This is the case and glass screen protector that I use. The setup is perfect for me. You could use any screen protector with this case. It also holds the glass ones down and keep them in place.
https://www.amazon.com/dp/B01INYYYDI/ref=cm_sw_r_other_apa_CE9Zxb7RJCJPC
https://www.amazon.com/dp/B01JTYPSLI/ref=cm_sw_r_other_apa_hB9ZxbR2MKR17
duracool said:
This is the case and glass screen protector that I use. The setup is perfect for me. You could use any screen protector with this case. It also holds the glass ones down and keep them in place.
https://www.amazon.com/dp/B01INYYYDI/ref=cm_sw_r_other_apa_CE9Zxb7RJCJPC
https://www.amazon.com/dp/B01JTYPSLI/ref=cm_sw_r_other_apa_hB9ZxbR2MKR17
Click to expand...
Click to collapse
Without clicking the link I'm gonna guess that's the unicorn beetle case. I have that myself and love it. I use the holster while at work
Great case. It works well with a glass screen protector.
I have an armorsuit on this phone, as well as several tablets and phones prior. Was originally skeptical of the curved edge, but it is working great so far. In the past 6 years armorsuits and common sense have kept me from having any cracked screens. And when I upgrade and sell the old phones, removing the armorsuit has always left a perfect as-new screen (but the housings usually have suffered damage from drops, etc.).
Skinomi
duracool said:
This is the case and glass screen protector that I use. The setup is perfect for me. You could use any screen protector with this case. It also holds the glass ones down and keep them in place.
https://www.amazon.com/dp/B01INYYYDI/ref=cm_sw_r_other_apa_CE9Zxb7RJCJPC
https://www.amazon.com/dp/B01JTYPSLI/ref=cm_sw_r_other_apa_hB9ZxbR2MKR17
Click to expand...
Click to collapse
Is your tempered glass screen protector any good? How is the clarity? Sensitivity?
The clarity and sensitivity is great. I have one on my phone and my fiances phone. This is the third one we bought and its pretty close to the flat ones. Just line it up because the cut outs are exact. No room for error.
DISCLAIMER: TRY AT YOUR OWN RISK!
Supplies: Fresh screen film, a thin, soft cotton cloth, and adjustable temp iron, spay bottle, and preferably a infrared thermometer.
Video: http://sendvid.com/ez03e7q7
If you're anything like myself, then you've discovered a long time ago, that although unsightly, screen protectors do exactly what they are supposed to do.
Enter Google Pixel: A beautiful screen that's just begging for protection so that it may remain as such for years to come... But there's a major problem. The screen is curved!
After failures from tempered glass and a few different brands of film protectors, I ordered the iCarez film protectors. The technique they recommend works really well. Nailed it on the first try, no bubbles or fuzzies!
After a few minutes, I noticed the right side peeling up. Pressed and rubbed and did everything I could would not stick. Tried again with a fresh film. Same thing, although this is the closest I've gotten to perfection so far.
Here's where the disclaimer comes in.
I grab the iron and set it to "synthetic". I let it heat up for a minute and check the temperature with my infrared thermometer. It's at about *220 f. I place the phone on the cloth and fold cloth over screen. Just one layer. Lightly spray the cloth with water so it's just a little damp. Then I grab the iron and with slow, firm movements, press the edge of the screen where the bubbles are, making sure to not leave it in one place for too long.
I pull back the towel and wipe away the moisture on the screen to reveal it's working! I have 90% of the halo gone!
The last bit just wouldn't go down. So I turned the iron up to about *270 f and repeated the same motion. Boom! Flat, no bubbles or halo.
If you try this, please be careful. I'm sure exposure to high temperatures is only OK for very short periods of time.
**I will reiterate that this should be done at your own risk.**
DON'T BE A DUMMY. DO NOT PLACE A HOT IRON DIRECTLY ON YOUR PHONE.
Good luck!
You could at least post a video or picture of the results.
Boo this man.
haitu said:
You could at least post a video or picture of the results.
Boo this man.
Click to expand...
Click to collapse
Noted... BRB
Had a heck of a time finding a hosting site, so I just had uncle Google create a video. I hope it's adequate.
http://sendvid.com/ez03e7q7
I never run a screen protector. Honestly by the time I was ready to switch phones I had one or two tiny scratches on the screen. My wife always runs a screen protector and while I am sure she is just using cheap screen protectors her screen always looks like shiz. Oh the reason I dont use screen protectors is because glass apparently keeps getting better and better so where is the need.
I also don't put things in my pocket with my phone and I tend tp put the glass side in towards my skin.
Just some perspective from a guy that doesn’t use screen protectors or cases. By all means your money is not mine and spend it how you will, this is just some insight.
I ordered the iCarez [HD Clear] Screen Protector for Google Pixel XL. I have had it on for 6 days and have had No issues at all. Very nice film screen protector. For years I have used, http://www.clarivue.com/browse-by-brand-screen-protector.html. Very solid ultra clear protector.
Thanks
haitu said:
You could at least post a video or picture of the results.
Boo this man.
Click to expand...
Click to collapse
twilk73 said:
I never run a screen protector. Honestly by the time I was ready to switch phones I had one or two tiny scratches on the screen. My wife always runs a screen protector and while I am sure she is just using cheap screen protectors her screen always looks like shiz. Oh the reason I dont use screen protectors is because glass apparently keeps getting better and better so where is the need.
I also don't put things in my pocket with my phone and I tend tp put the glass side in towards my skin.
Just some perspective from a guy that doesn’t use screen protectors or cases. By all means your money is not mine and spend it how you will, this is just some insight.
Click to expand...
Click to collapse
I see where you're coming from. I treated this phone like a sleeping baby on a land mine for the first few days waiting for a case and screen protector to come in the mail. Even then I still got a few small superficial scratches on the screen and a pretty noticeable one the softer back glass. A properly installed screen protector is barely noticeable and I change it out every few months when it gets scratched up. Small price to pay for the added protection.
It boils down to preference. At any rate, if you do like them, it's hard to install one on this phone. This is a way to get it to fit better. It's been a few days now and it's holding strong. I'm pleased.
I've noticed after my screen protectors get crappy and I haven't had them on my phone for a while, my screen never really gets scratched up. Therefore, I don't really use screen protectors anymore.
The only thing that ever scratched my screen was a titanium keychain accessory on my keyring. Regular keys never scratched my screen, but the titanium sure did. Luckily it was on a horrible temp phone I was using until my pixel arrived
I quit using protectors. Don't like the way they feel. And they have come a long way in scratch proof glass
Bought a tempered glass one about 2 weeks after getting the phone. And I got it about a day or 2 after its initial release.
Havent had any issues with it at all. Can't remember the brand, I just know it's a full protector, covers the entire front of the phone.
I bought the Supershieldz tempered glass 2 pack off Amazon as I have had success in the past with their screen protectors. It covers JUST the usable portion of the screen, not the entire front, and it works just fine. Zero bubbles and no "halo".
I've just got the orzly pro protector, covers the entire front as well with perfect cutouts
Easy to install, just hinge it and flap it on lol
Sent from my Pixel using Tapatalk
Hello,
Has anyone tried the Liquid Dispertion Tech Screen Protectors from Aliexpress?
I am wondering if they are worth it.
Link
Thank you
Jay
I ordered the FULL SIZE of that one about a week ago. https://www.aliexpress.com/item/2pcs-Full-Glue-UV-Liquid-Glass-for-Galaxy-Note-8-S9-Plus-S8-UV-Light-2pcs/32883790652.html?spm=a2g0s.9042311.0.0.1efd4c4dtTx93F
If you wanna wait until it arrives I can report once i get it and apply it hahah
Please write us a review after you recieve! I'm looking for a same solution but i didn't find any perfect for my S7 before...so i'm afraid i won't find perfect - what did not cover from the watchable screen...
babyboy3265 said:
I ordered the FULL SIZE of that one about a week ago. https://www.aliexpress.com/item/2pcs-Full-Glue-UV-Liquid-Glass-for-Galaxy-Note-8-S9-Plus-S8-UV-Light-2pcs/32883790652.html?spm=a2g0s.9042311.0.0.1efd4c4dtTx93F
If you wanna wait until it arrives I can report once i get it and apply it hahah
Click to expand...
Click to collapse
.:JiM:. said:
Please write us a review after you recieve! I'm looking for a same solution but i didn't find any perfect for my S7 before...so i'm afraid i won't find perfect - what did not cover from the watchable screen...
Click to expand...
Click to collapse
If you got the S7 Edge then this seller on ALi has the proper glass for your phone as well. In any case I have seen enough videos of how to apply this protector that I am now persuaded that this is indeed the ultimate screen protector for edge phones, the only thing that is to be found out, would be the quality of the glass it self.. AKA, oleopathic coating, strength and etc. These things are important as these days 90% of Chinese tempered glass has no oleopathic coating and is not even real tempered glass, it is just a cheap gimmic that breaks easy as F***. So hopefully since this whole UV glue is a next level kinda thing, the quality might still be on the high.
When mine arrives I will make a video of the installation and post it here for you guys with my comments.
i have S9 and S7.
ok, i will wait for it, thank you Mate!
babyboy3265 said:
If you got the S7 Edge then this seller on ALi has the proper glass for your phone as well. In any case I have seen enough videos of how to apply this protector that I am now persuaded that this is indeed the ultimate screen protector for edge phones, the only thing that is to be found out, would be the quality of the glass it self.. AKA, oleopathic coating, strength and etc. These things are important as these days 90% of Chinese tempered glass has no oleopathic coating and is not even real tempered glass, it is just a cheap gimmic that breaks easy as F***. So hopefully since this whole UV glue is a next level kinda thing, the quality might still be on the high.
When mine arrives I will make a video of the installation and post it here for you guys with my comments.
Click to expand...
Click to collapse
So the glass i ordered arrived yesterday. Photos below. On the 1st glance, the glass appears to be of rather good quality and it seems to have a real oleopathic coating against fingerprints, which is quite rare these days with Chinese tempered glass.
As promissed i will make a video of how i apply it and post it here.
babyboy3265 said:
So the glass i ordered arrived yesterday. Photos below. On the 1st glance, the glass appears to be of rather good quality and it seems to have a real oleopathic coating against fingerprints, which is quite rare these days with Chinese tempered glass.
As promissed i will make a video of how i apply it and post it here.
Click to expand...
Click to collapse
Very Nice! Thank you for the info.
Jay
I ordered this for my S9 plus. It worked very well. It doesn't come with an install kit to balance the dispersement of the liquid, so when I installed it I missed a small edge and I installed it a little to low on the phone so my case would move it. So I removed it.
However I would recommend this product as a good alternative to the more expensive model.
Ok so LONG post, but absolutely necessary to read if you consider using this type of screen protection. My glass arrived 2 days ago and I applied it today. It is crystal clear and the visibility is at its best, touch sensitivity has not been affected at all. It is pleasant to the touch and does not feel like crappy tempered glass. (pics attached)
I had promised that I will upload a video but I did not think it trough and on the 8th minute the memory on my backup camera finished, so without my realization it turned off.
Below however are a few notes that are important and I realized it while shaking above the phone and overcoming them
1. Make sure to put a dust sticker on the TOP speaker in case some glue decides to enter there..
2. Put dust stickers above the buttons, all of them, so in case some glue leaks out it will not go inside the buttons.
3. From the place i ordered on Aliexpress, the glue that arrived may have been about 10%- 15% more than necessary in the tube, so i got leaks on the sides of the phone once the glue spread all over, I cleaned it with a napkin, it is possible that it leaked as I may have mistakenly applied a slight pressure on the glass while I placed it. I recommend that once you release all the glue from the black non-transparent bottle, you can squeeze it and then suck up about 10 15% of the glue that is on top of your screen.
4. Make sure before you start the whole procedure, to turn your phone off.
5. Do it on a FLAT surface because the glue may start moving from the middle of the phone towards the sides.
6. If you order from the same seller I did, your lamp would likely have a pre-set timer, as mine apparently does. In this case, the lamp will turn off every 45 seconds approx, that signals that you should move it on the next area (Bottom, middle, top) of the screen.
7. I would recommend that once you place the glass on top of the glue and let it spread, DO NOT freak out if it leaks. Turn on the lamp, and move it on top of the screen from top to bottom for about 40 seconds so the glue hardens just a little. Then with a napkin gently absorb the leaked glue.
8. Make sure you see at least 5-6 videos of other guys doing it so you can be best prepared.
Overall, I think it is a good option for screen protection, much better than all the NON-FULL GLUE alternatives. Aka, protectors with glue only on the sides of the glass only and not in the middle. It is tricky to apply but once you are done you will be glad you went for it. I am not sure if it is any different than the more expensive versions others people are talking about, I suspect that it is plain re-branding. The more expensive ones just come with a different brand logo, better advertisement and more promises. But, same thing in reality. At least in my case, I paid about 15$ and got 2 glasses, 2 glues, and a good UV lamp.
Quick summary: Find a dust-free flat surface with good light, clean screen, apply stickers to speaker, and all holes and buttons, gently remove any additional dust particles from screen,apply glue to middle of screen, gently place glass on top and DO NOT apply pressure, if it is not too straight you can move it a bit, If any leaks, apply UV light for about 40 seconds up and down, gently clean leaks, apply UV light for 45 seconds for 3 more rounds. At the end you may even do one more 45 second round top to bottom as I did.
Enjoy.
EDIT: After applying it the whole thing, the glue may still remain slightly sticky on the corners, so that may allow extra dust to stick on it. However, If you can, leave the phone under the sun for 10 minutes, and the glue will dry to the full, then it would be easy do fully clean the corners with your nail or some non dusty cloth. Just do not put too much pressure with your nail as you may raise the glass and allow a bubble to form.
I have ordered the same today. lets see when I receive it.
@BABYBOY 3265
Is that compatible with mofi cases? I wanted to order it with one of their fabric type case.
fmaher said:
@BABYBOY 3265
Is that compatible with mofi cases? I wanted to order it with one of their fabric type case.
Click to expand...
Click to collapse
It should be... I don't see why not. The one i ordered covers most of the screen but leaves quite a bit out as you can see in the pics i posted... and that is considered not too case friendly. However to me it seems pretty compatible with all cases.
But, to be safe you can order the alternative case friendly version of the glass from the same seller. It is smaller and covers even less of the screen. I don't see the harm in getting one and trying it
Received mine today. Took 12 days to reach India. The screen guard is really good,fits perfectly. the glue is little excess so had to clean up a lot. note for next time. However I fixed the glass a little to the lower side so bundled case is almost touching the glass. Don't know in future if it will lift because of that. Overall a fantastic deal.
Hello
I received mine yesterday it took about 13 days to get to the EU, and applied it today.
The application when well on the first try,i did watch quite a few tutorials beforehand and that helped alot.
The screen protector is very clear , and you do not notice it at all, it also seems to have some real oleophobic coating.
Tactile responsiveness is on par with what you would get without a screen protector.
All in all a very good alternative to the more expensive competitor you also get two screen protectors and two tubes of glue for the same price.
If you are in the market for a screen protector dont hesitate.
Jay
Just ordered, thanks for the review & tips..
Another positive report here, although I wish I'd been a bit more careful as I have a couple of tiny bubbles near the edge. They only show up on a bright white screen so I may live with them rather than try again with the spare glass & glue.
jsanta11 said:
Just ordered, thanks for the review & tips..
Click to expand...
Click to collapse
You wont be disapointed.
watch some videos before applying it, that really helps.
Check out this one for example.
( not affiliated in any way but i found it really helpful.)
Good Luck
j1978 said:
You wont be disapointed.
watch some videos before applying it, that really helps.
Check out this one for example.
( not affiliated in any way but i found it really helpful.)
Good Luck
Click to expand...
Click to collapse
Thank you very much!!!
I have the whitestone and love it. Was wanting something for a backup though. Last time I waited a week to get my warrenty replacement.
Does the AliExpress come with a tray to line up the glass? Or does the glass work with the Whitestone tray? If not, how do you get your glass lined up?
todd3835 said:
I have the whitestone and love it. Was wanting something for a backup though. Last time I waited a week to get my warrenty replacement.
Does the AliExpress come with a tray to line up the glass? Or does the glass work with the Whitestone tray? If not, how do you get your glass lined up?
Click to expand...
Click to collapse
The tray you are talking about probably will work. However the standard way to align the glass is by your finger and vision. Just make sure that if you do so, do not press downwards while you are moving and aligning the glass. If you press down, it will push some of the glue out...
Hello all!
First time posting in a while, so forgive me if I'm a bit rusty. I just got my Samsung Galaxy Note 10+ yesterday, and my amFilm Ultra Glass Screen Protector today, so I thought I'd write up a little review. Sorry for no pics, but I was busy installing and trying to keep things dust-free
I've used Whitestone in the past but was disappointed with both my Note 8 and 9 installs, primarily because of the LOCA spiderwebbing on the edges. I figured I'd give another brand a shot, so I went searching here and found the amFilm Ultra Glass Screen Protector. A quick trip over to Amazon, and $40 later (for a full kit including *2* protectors) and here we are!
PACKAGING: The box is nice - wider and flatter than the WS product. It's clean and simple, but professional looking. Plus their website and install video are well done also. Inside the outer box are three smaller boxes. The largest contains the plastic frame, screen protectors, and wipes (I think). The medium size box contains the UV light and the MicroUSB cable. It appears to be identical to the WS product, but I don't know this for a fact, so take that for what it's worth. The smallest box contains the LOCA (2 tubes), extra absorption pads, plastic pin, tabs to place over the speaker, a bubble level, and a weight. Everything you need comes in this kit, including plenty of wet and dry wipes, microfiber cloths, and dust removal stickers. On the packaging is a QR code to go to the install video.
PRODUCT: Everything seems to be on the same quality scale as the WS product, with a few minor changes - 1) there is no LOCA applicator "bridge", you have to aim and dribble the solution by hand, 2) the pin is different - there's no more tilting the entire phone to move the liquid into position - the pin is angled and sets the glass down at an angle, and 3) the "fingerprint" weight (more on this later). Otherwise, if you've done the WS before, this isn't significantly different.
INSTALLATION: **REMINDER** REMOVE the factory plastic screen protector and clean your screen THOROUGHLY before proceeding! I ALMOST forgot, which would have been a disaster! I watched the video twice and didn't see any mention of this, so amFilm, here's a tip for you. Anyway, installation is straightforward -put the little feet on the bottom of the phone to bring it flush with the pins inside, make sure the screen is 100% clean, install the sticker over the speaker, apply the liquid (making sure to absorb any "splatter" before proceeding!), peel the protective film off the glass, place it, and pull the pin. Once the liquid starts to spread, put the weight where the fingerprint sensor is and let it settle and "ooze" for 3-ish minutes. (NOTE - it's hard to locate the fingerprint scanner, so you might want to mark the frame in advance with a Sharpie (another tip for amFilm - marking that plastic with some kind of raised bumps or hash marks might be a good idea, or maybe a film for on top of the glass that marks where to place it - just a thought). After that, it's bake-time under the UV light, then you're done.
RESULTS: I'm very impressed so far. The glass appears to be nice and clear, and I can't even see the little "spots" in the corners others mentioned. I lucked out this time and no dust specs at all. No bubbles, etc. the fingerprint scanner appears to be working fine, although I haven't re-registered anything. It DOES require a little extra "umph" to scan, but that's not a big deal. Part of that could be me getting used to an in-screen scanner. There was minimal over-oozing, and the pre-installed pads absorbed everything fine. Barely needed a wipedown afterward.
FITMENT: There appears to be no flaws in placement using the guide, or in the fitment of the glass. It sits flat, and lines up exactly where it should. The cutout for the front-facing camera is exactly where it should be, and it's not overly-exaggerated in size. The edges leave plenty of room for putting the phone in a case (I've tried 4 so far, all fit without touching the glass edge, so there's no worry about case push on the glue). The bottom edge is just a tad bit short, maybe a 1/16", but that could be allowing for larger cases (I don't use the big bulky ones, so IDK).
OVERALL ASSESSMENT: 4.5/5 Stars - Great product, especially for the price. I'll keep you posted on long-term wear & quality, but for now, I'd say it's a great deal versus the competition.
Great review. I just installed mine yesterday and I've had exactly the same great experience with the product. It really does work well with the fp scanner. I had a terrible time with the S10 plus fp scanner and the Whitestone. Great price as well. I'll buy again for sure.
Mine note come with preinstalled glass protector
fazi78 said:
Mine note come with preinstalled glass protector
Click to expand...
Click to collapse
So did everyone's. There's three or four threads about it already. And that's why the OP said to make sure to removed the factory installed screen protector.
Will this work with the samsung clearview cover ?
and can this protector be easily removed?
thanks
I just picked up a set of the amfilm install went flawless a lot easier than the whitestone I had on my S8 fingerprint worked right of the bat with what I had already registered I think it even sensed it better than the stock protector that came with the phone, well spent $40 bucks on amazon
Forgot to mention it fits perfect with my otterbox case
neils31 said:
Will this work with the samsung clearview cover ?
and can this protector be easily removed?
thanks
Click to expand...
Click to collapse
Not sure about the Clearview cover, I haven't ordered it yet.
As for removal, it uses LOCA glue to adhere the screen protector to the phone, so it's not the easiest thing to remove, but will come off with a little effort. You will want to have lots of alcohol wipes handy to clean the screen afterwards. Maybe a few Band-Aids, too
AMfilm doesn't seem to gather dust at the edges like it did with the Whitestone install on my Galaxy Note 9. That's a blessing! I was always cleaning clingy dust away on a daily basis. The edges on this install are clean!
RaymondPJR said:
AMfilm doesn't seem to gather dust at the edges like it did with the Whitestone install on my Galaxy Note 9. That's a blessing! I was always cleaning clingy dust away on a daily basis. The edges on this install are clean!
Click to expand...
Click to collapse
Hey Ray, do you know why? is it because of different density loca glue? I really want to switch to glass protector but hesitant because of dust built up around the edges.
Sent from my SM-N975W using Tapatalk
neils31 said:
Will this work with the samsung clearview cover ?
and can this protector be easily removed?
thanks
Click to expand...
Click to collapse
yep. works with every case i got so far. Might have issue with the ones with a front plastic piece though like on some heavy duty cases.
not sure about removal, but ive not had issue with any loca based one so far in the years ive used them.
lexi250 said:
Hey Ray, do you know why? is it because of different density loca glue? I really want to switch to glass protector but hesitant because of dust built up around the edges.
Click to expand...
Click to collapse
It must be a difference in the glue, I don't know what else accounts for it. I had really fuzzy edges all the time with WS.
How hard is it if you want to remove the screen protector pls?
I'll add my review...
I applied this to my S20+ yesterday. The steps were clear on paper, but the video was more helpful still.
Everything went fine with the exception that when I opened the adhesive tube it sprayed out a bit even before the top cap was opened, and I suspect this is due to me living at a high altitude. As a result my glue didn't fully spread to the whole screen, but close, and there were many small bubbles in the center of the screen. Next time I might try opening and closing the top first to equilibrate pressure.
That said, this is a promising product. It has a smooth and even finish, remains low profile so my case fits which still wraps the lateral edges, and the fingerprint part works a bit better than with the cheap plastic screen protector that samsung supplied (which also scratched easily).
I've never used screen protectors on prior phones, but this product is nice enough that I'll use it on future phones as well.
Additionally, the customer service was outstanding and they immediately sent me a replacement protector and more adhesive to try again.
Thumbs up so far, I'm confident my next application will be successful.
For those who installed this last year, how has it held up?
Jammol said:
For those who installed this last year, how has it held up?
Click to expand...
Click to collapse
Not good I'm guessing, based on the lack of replies. Wish someone woulda replied, oh well...
Sent from my SM-N950U using Tapatalk
Sorry, haven't been on XDA much. I've had my amfilm since Dec, 2019 and it's still like new. Oleophobic coating has not wear off.
I ordered a $2.15 LOCA tempered glass screen protector on Aliexpress. Purchased 08/28 and received it today 09/17. I live in San Francisco. Overall the quality of the screen is pretty much the same as the Whitestone. This one doesn't come with the plastic alignment case that the Whitestone comes with, but you get a UV light and single bottle of glue. I used the same procedure as Whitestone but just without the guide. Also you don't get any tapes to protect the USB ports, etc. I just cut some packing tape and covered those up. I did ok, there is a small air bubble at the bottom. I hope it slowly cures over time. My experience with Whitestone is that you don't want to push and squeeze too hard. You can barely notice it when screen is on, but I'm kind of OCD so I ordered another and may swap it.
So if you have experience and can wait (Note 10/10+ comes with a screen protector), save some money. BTW, finger print works just fine.
Aliexpress Link
is that an Spigen tough armor case?
cheers
Same experience. Nothing fancy, but it gets the job done. Just tape over the speakers. There are some on ebay for a similar price if you don't like using Ali for some reason.
Whitestone and AMFILM are good if you need to be spoon fed.
*looks at my Whitestone with no bubbles* Hmmm... Maybe being "spoon-fed" isn't so bad.
Mr. Orange 645 said:
*looks at my Whitestone with no bubbles* Hmmm... Maybe being "spoon-fed" isn't so bad.
Click to expand...
Click to collapse
I had bubble with my first Whitestone. I think having the guide cage helps but if you have experience, it's not necessary. There is just some luck to it.
Sent from my SM-N975U using Tapatalk
gordec said:
I had bubble with my first Whitestone. I think having the guide cage helps but if you have experience, it's not necessary. There is just some luck to it.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
I've installed quite a few LOCA TGSPs. Some I bought LOCA separate and then bought a TGSP and made my own kit. Worked great, was messy AF to install, cause I had NO idea how much to use, LOL. and they all chipped and cracked in a week or two.
I've also bought some cheaper kits that included the right amount of LOCA and a TGSP. They ended up lifting on the edges. Last one I tried was Note 9.
I wound buying a second used Note 9 that already had Whitestone Dome installed by the previous owner, and I loved it. So when I pre-ordered my Note 10+, I pre-ordered a Whitestone Dome for it. Sucked paying over $40, but honestly, I've spent hundreds in the past trying to find the "perfect" screen protector. Don't regret Whitestone or the money spent at all. And the installation tray made it dead simple. It was worth it to get it right the first time.
If I had to change TGSPs, if go with AmFilm, just because they're also getting great reviews are basically half the price. Or I'd go back to a soft screen protector, the Ringke Dual Easy Film. It's just basically invisible.
Mr. Orange 645 said:
I've installed quite a few LOCA TGSPs. Some I bought LOCA separate and then bought a TGSP and made my own kit. Worked great, was messy AF to install, cause I had NO idea how much to use, LOL. and they all chipped and cracked in a week or two.
I've also bought some cheaper kits that included the right amount of LOCA and a TGSP. They ended up lifting on the edges. Last one I tried was Note 9.
I wound buying a second used Note 9 that already had Whitestone Dome installed by the previous owner, and I loved it. So when I pre-ordered my Note 10+, I pre-ordered a Whitestone Dome for it. Sucked paying over $40, but honestly, I've spent hundreds in the past trying to find the "perfect" screen protector. Don't regret Whitestone or the money spent at all. And the installation tray made it dead simple. It was worth it to get it right the first time.
If I had to change TGSPs, if go with AmFilm, just because they're also getting great reviews are basically half the price. Or I'd go back to a soft screen protector, the Ringke Dual Easy Film. It's just basically invisible.
Click to expand...
Click to collapse
Soft ones are uncomfortable with spen right? I tried one for the Note 9.
Sent from my SM-N975U using Tapatalk
gordec said:
Soft ones are uncomfortable with spen right? I tried one for the Note 9.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
Depends on which one you buy the wet install ones typically suck to use with the SPen. The Ringke was awesome. Couldn't tell it was there, even with the SPen. I honestly can't speak highly enough of them. They honestly feel like glass.
Thanks. Bought one to try.
Sent from my SM-N975U using Tapatalk
Mr. Orange 645 said:
Depends on which one you buy the wet install ones typically suck to use with the SPen. The Ringke was awesome. Couldn't tell it was there, even with the SPen. I honestly can't speak highly enough of them. They honestly feel like glass.
Click to expand...
Click to collapse
Installed it. I like it. It's not glass but very smooth with Spen. The extreme edges has slight lift but very mild. Not sure if you had some tricks to get all the edges to stay down.
gordec said:
Installed it. I like it. It's not glass but very smooth with Spen. The extreme edges has slight lift but very mild. Not sure if you had some tricks to get all the edges to stay down.
Click to expand...
Click to collapse
I haven't tried one on my N10+, but installed them on my Note 9 and my wife's S10+. Neither one had any issues with the edges lifting at all. I wish I had some tricks to offer, but I just followed the directions.
It's funny, when I installed my wife's Ringke on her S10+ I was showing her the difference between it and the Whitestone Dome tempered glass (which are the time was on my Note 9). I was showing her how glass was smoother than her Ringke protector, but to my surprise, my finger actually glided easier across her Ringke than my Whitestone! Now my Whitestone Dome on that phone was a few months old, so some of the oleophobic coating had probably worn off and her Ringke screen protector was brand new, but I was really shocked and just how smooth it was to the touch.
As far as the lifting edges, two thoughts. One, you didn't get it lined up perfectly so maybe something is a little off? A half millimeter either way could make it uneven. But I don't think thats the issue. Two, perhaps the edges of your phone weren't clean enough and had some residual oils? Or three, you just got a faulty screen protector. If it gets worse, try the second one in the pack. If that fails, reach out to Ringke and they should replace it for free.
Mr. Orange 645 said:
I haven't tried one on my N10+, but installed them on my Note 9 and my wife's S10+. Neither one had any issues with the edges lifting at all. I wish I had some tricks to offer, but I just followed the directions.
It's funny, when I installed my wife's Ringke on her S10+ I was showing her the difference between it and the Whitestone Dome tempered glass (which are the time was on my Note 9). I was showing her how glass was smoother than her Ringke protector, but to my surprise, my finger actually glided easier across her Ringke than my Whitestone! Now my Whitestone Dome on that phone was a few months old, so some of the oleophobic coating had probably worn off and her Ringke screen protector was brand new, but I was really shocked and just how smooth it was to the touch.
As far as the lifting edges, two thoughts. One, you didn't get it lined up perfectly so maybe something is a little off? A half millimeter either way could make it uneven. But I don't think thats the issue. Two, perhaps the edges of your phone weren't clean enough and had some residual oils? Or three, you just got a faulty screen protector. If it gets worse, try the second one in the pack. If that fails, reach out to Ringke and they should replace it for free.
Click to expand...
Click to collapse
The lift is really very minor. Only the most OCD types will mind. Thanks for the rec. I agree how easy it's to glide your finger on it. Finger print also works better.
gordec said:
The lift is really very minor. Only the most OCD types will mind. Thanks for the rec. I agree how easy it's to glide your finger on it. Finger print also works better.
Click to expand...
Click to collapse
I installed Whitestone on my N10+, but bought a pack of Ringke as a back up. Crack the Whitestone, I can install the Ringke while waiting on a replacement.
But, I think what I'll do is next paycheck, I'm going to order the AmFilm LOCA screen protector and run a little comparison.
I've used Whitestone for a month now and am pleased, but I do think it made the FP sensor less accurate But I'll remove it and install the Ringke and see how I like it, especially with the fingerprint sensor.
I'll use that for a couple weeks then install the AmFilm tempered glass one and compare it to the others.
It means a waste of $40, but in the name of inaccurate anecdotal science, why not? And if I decide I prefer Whitestone after all, it's just a $10 replacement under warranty to go back to it. I'll post my results in a thread here, maybe with some pictures.
Sorry, I know that had nothing to do with your lifting edges. Just thinking out loud. And by out loud, I mean in silence and just typing it.
The lifting edges of ringke, when I installed on my s10+, I found it best to work them down initially then just wait a while before trying again. I waited around 30 mins to 1hr after fitting it and found they stuck down easily.
I struggled with the 1st protector so discarded it but using the waiting method, the 2nd protector sides stayed down.
If you like the original screen protector you can get OEM quality screen protectors cheap on eBay. You want ones made out of PET which are harder like the OEM ones and not the soft TPU ones that you have to install wet and they dent way too easily. I install the PET ones wet though as you have time to move it around on the screen to get it aligned perfectly and you just push out the solution (I spray purple cleaner on the screen before I install) and any dust is removed when you push out the solution.
Just installed one myself that came from aliexpress. It turned out fine but was a bit disappointed that the glass is curvy on the edges like an s10 rather than being "boxy" so the edges are a bit exposed. Can't be bothered though to buy another one and go through the installation again as it took quite some time to get it done. Fingerprint is working fine, just press the fingerprint area while curing for the first time.
ajsmsg78 said:
If you like the original screen protector you can get OEM quality screen protectors cheap on eBay. You want ones made out of PET which are harder like the OEM ones and not the soft TPU ones that you have to install wet and they dent way too easily. I install the PET ones wet though as you have time to move it around on the screen to get it aligned perfectly and you just push out the solution (I spray purple cleaner on the screen before I install) and any dust is removed when you push out the solution.
Click to expand...
Click to collapse
I thought using a wet solution would make the glue not stick anymore for the PET types. Also I was told by Samsung that the stock screen protector is applied with a UV light to cure. So it's like a tempered glass install but a thin plastic type?
fusiondynamics said:
I thought using a wet solution would make the glue not stick anymore for the PET types. Also I was told by Samsung that the stock screen protector is applied with a UV light to cure. So it's like a tempered glass install but a thin plastic type?
Click to expand...
Click to collapse
The adhesive will stick fine on the protector even if you install it wet. I do it all the time.
what is the price this protector?
protector price,?
ajsmsg78 said:
The adhesive will stick fine on the protector even if you install it wet. I do it all the time.
Click to expand...
Click to collapse
What do you use, just water or lightly soapy solution?