Hi everyone I have J320F and flashed j2 pro redux by markusII. After that i wanted to revert to stock and when i flash stock firmware with ROM CSC i noticed that my csc was set to EUR (Greece) and when I reset my phone preset language is greece and in internet i have samsung greece.
Long story short: How I change back to my ROM CSC please?
PS:Also, when flashed Lineage in the past, csc didn't change. J2pro rom did something to my CSC.
Related
Hi, I want to flash my galaxy as fedup with waiting for updates.
I got BTU, UK unbranded, unlocked S4
I am polish, so thinking flash it to polish firmware as they get it fast.
GT-I9505 XEO I9505XXUBMEA thats the one I want go for
Can someone tell what is it ? is it network firmware or unbranded?
I would go for it only if I can change CSC code to XEO, so I can get OTA updates.
If not I will keep waiting for BTU
And Dont really want XEO polish carier firmware, as I can flash to Three UK BTU network, would be the same and dont have to change CSC.
So, main questions are
What it is XEO ? what network ?
Can I flash it + change code to CSC all safe?
and how to do it ? Odin
Thank You.
Kris
matale0 said:
Hi, I want to flash my galaxy as fedup with waiting for updates.
I got BTU, UK unbranded, unlocked S4
I am polish, so thinking flash it to polish firmware as they get it fast.
GT-I9505 XEO I9505XXUBMEA thats the one I want go for
Can someone tell what is it ? is it network firmware or unbranded?
I would go for it only if I can change CSC code to XEO, so I can get OTA updates.
If not I will keep waiting for BTU
And Dont really want XEO polish carier firmware, as I can flash to Three UK BTU network, would be the same and dont have to change CSC.
So, main questions are
What it is XEO ? what network ?
Can I flash it + change code to CSC all safe?
and how to do it ? Odin
Thank You.
Kris
Click to expand...
Click to collapse
as far as i tried you cant change csc with flashing . unless you flash single csc not multi.
only way is to root with auto root than change csc wit csc changer and then flash desired firmware with odin.
xeo looks like it is simfree so its just general for poland
madman_cro said:
as far as i tried you cant change csc with flashing . unless you flash single csc not multi.
only way is to root with auto root than change csc wit csc changer and then flash desired firmware with odin.
xeo looks like it is simfree so its just general for poland
Click to expand...
Click to collapse
can i get singles files for odin? CSC XEO ?
thx
matale0 said:
can i get singles files for odin? CSC XEO ?
thx
Click to expand...
Click to collapse
i didnt find any searching on net so i guess no. they usualy pack 20+- csc together
there was some talk of chcnging csc with flashing twice with odin without auto reboot. but that didnt work for me.
madman_cro said:
i didnt find any searching on net so i guess no. they usualy pack 20+- csc together
there was some talk of chcnging csc with flashing twice with odin without auto reboot. but that didnt work for me.
Click to expand...
Click to collapse
i try that http://www.hotfile.com/dl/229983758/7d4d060/I9505XXUBMEA_I9505OXXBMF1_XEO.zip.html
matale0 said:
i try that http://www.hotfile.com/dl/229983758/7d4d060/I9505XXUBMEA_I9505OXXBMF1_XEO.zip.html
Click to expand...
Click to collapse
try it. remember if you want to change csc with single flash(wich i dont think so ,that worked on s2) after first boot reboot to recovery and wipe data/chache. in recovery you will see wich csc applied.
https://play.google.com/store/apps/details?id=com.manniakk.cscselector
Can someone help me out as I am new to all of this...
I am using a Samsung galaxy tab 7.0 (p2610), and I flashed a jelly bean update successfully using odin. I am not rooted.
I have a system update in the notifications window that is stuck there, that is not working (process fails), this is due to the csc code being in great britain.
I am in Canada, I have Odin ready to go, can someone please show me how to change the CSC of my device to Canada?
Where do I go to download the appropriate file? After I assume I load it up in Odin with device in recovery mode, and flash using the "CSC" option in Odin correct?
Any help would be great.
Hi,
I am using International version of Samsung Galaxy S5 G900F, I bought it with the firmware belonging to KST(Saudia Arabia). As I was in need of 4G I flashed it with official firmware from Poland (XEO) at that time only country having Lollipop update. After some time I rooted my mobile. and flashed Xtrestolite rom. Now I reverted back to stock official firmware from England(BTU). My CSC when seen in Kies is from XEO(Poland). While I installed Firmware from England. Now again I rooted my mobile again and installed Xtrestolite rom to change CSC manually through Phoneinfo Samsung. But it gives error. It shows in CSC section
Original CSC XEO
Firmware CSC BTU
Active CSC XEO/BTU
CSC Country UK & IRE
Prouct name G900FZDAXEO
How can I change original CSC according to the official firmware installed i.e. BTU(UK) to get official updated from Kies?
Try this
http://forums.androidcentral.com/sa...5-guide-how-change-csc-samsung-galaxy-s5.html
*Detection* said:
Try this
http://forums.androidcentral.com/sa...5-guide-how-change-csc-samsung-galaxy-s5.html
Click to expand...
Click to collapse
No Luck. Same
After flashing firmware going to recovery android icon comes and some installation starts (A blue bar below it) it goes almost half in the way and phone restarts again. If I go to recovery there comes.
Manual mode
Appling multi-csc
Applied the CSC-code: XEO
Successfully applied multi-CSC
Hi everyone,
I installed an original firmware from germany and my CSC shows as original the CSC code as SIM which is from Slovenia and only firmware from that country is for the 910C but I have a 910F.
Now I would like to know which is my original CSC.
thank you!
Changing CSC XSG to TUR
Hi everyone. i have a big problem. ive got turkey version 935f .last week loaded holland rom on my s7EDGE. now returned my original firmware but my csc shows XSG. İ know tur rom have multi csc .Can i change default csc XSG to TUR editing pit file?
Sorry for my bad english.
PIT FILE ODIN FLASH AFTER TUR CSC WORK ?
MARSMALLOW TURKEY ROM TURKEY PIT FILE ?
help me ?
flash with tr firmware if you're not in tr firmware, root your device , use csc changer and change it to TUR, then reflash the turkish firmware again.(if you don't want your device to be rooted, that is.)
If it doesn't work, you're doing something wrong. be patient about these proccesses till their end.
Official firmware
its better if u download official firmware(TUR version) from sammobile and flash it using odin. That will bring ur mobile to stock firmware with the tur csc.
if u want you can root your mobile later.
I hope this helps u..
Hey guys! So, out of curiosity, I've downloaded and flashed the most recent Oreo from Russia (CSC: SER) thinking that I would like to try out the new Oreo software. After I've tried it, I decided to go back to Nougat by flashing the stock firmware (CSC: XME) I downloaded from sammobile.com. After completing it, someway, somehow, the device is now stuck in the Vietnam CSC (XXV). I've been downloading various of XME firmwares from the past and everytime it finish flashes, it will start up in Vietnamese and I'm stuck again with the Vietnam CSC. Nice that I'm able to get oreo with a Vietnamese CSC, but I don't want to use it because the Samsung Pay works different in Vietnam in comparison to Malaysia. And, I've no idea how flashing a SER and then XME would come out with a XXV CSC is beyond my imagination. Is there anyway for me to return back to my stock CSC without rooting and tripping Knox?
Opening the stock recovery completes the CSC installation, give that a try. It's expected to show "Updating 0-100%".
jereyeap said:
Hey guys! So, out of curiosity, I've downloaded and flashed the most recent Oreo from Russia (CSC: SER) thinking that I would like to try out the new Oreo software. After I've tried it, I decided to go back to Nougat by flashing the stock firmware (CSC: XME) I downloaded from sammobile.com. After completing it, someway, somehow, the device is now stuck in the Vietnam CSC (XXV). I've been downloading various of XME firmwares from the past and everytime it finish flashes, it will start up in Vietnamese and I'm stuck again with the Vietnam CSC. Nice that I'm able to get oreo with a Vietnamese CSC, but I don't want to use it because the Samsung Pay works different in Vietnam in comparison to Malaysia. And, I've no idea how flashing a SER and then XME would come out with a XXV CSC is beyond my imagination. Is there anyway for me to return back to my stock CSC without rooting and tripping Knox?
Click to expand...
Click to collapse
So, I have done some digging around the internet and found this link from the Sammobile forum. I've tried the methods in that forum, and it works!
If any of you have suffered the same problem as me, you could perform troubleshoot using this method. It seems that firmware for XME is actually multi-CSC and includes other CSC such as Vietnam, Thailand, Singapore, Myanmar and etc.. The Vietnam CSC is the default CSC.
So, here you go. This is the link: https://www.sammobile.com/forum/threads/39155-How-to-change-CSC-with-a-combination-file