Database Users

Going back to Sense from [RUU] Google Edition Conversion.Graffixync UPDATE 12th May

EDIT - UPDATED INSTRUCTIONS 12th May 2014
Due to the partition sizes being different in the GPE RUU it is not simply a case of flashing a sense rom in recovery. You will experience problems if you do this. This might involve getting the storage encrption message, bootloops, freezing etc etc.
This thread is specifically for users who have problems getting back to sense. Solution is below. If you have alternative solutions that have worked without issues please post.
I have tried to make them as simple as possible. This guide assumes you are S-Off otherwise how did you get here. (
This does not apply if you have installed a GPE ROM. You can flash as normal through recovery. (using instructions of new rom)
Thanks to @exad for his continuing support/assistance throughout the thread, as well as @graffixnyc for the GPE RUU and both he and @navalynt for finding the initial fixes.
It will be much easier if you have your new Rom on your external sdcard prior to starting this. It will also stop a number of problems if you have SuperCID (11111111) If you don't know how to - FASTBOOT Commands
1. Enter the command "fastboot oem readcid". Make and KEEP a note of your original CID.
2. Enter the command "fastboot oem writecid 11111111"
3. Enter the command "fastboot read cid" [it should confirm your CID is 11111111]
4. Press the volume down button twice on your phone and navigate to reboot bootloader, then hit power button to reboot the bootloader.
5. Bootloader will also say "CID-11111111" now to confirm (Thanks to @xl VipeR lx ) Also to @umjammerlammy for the GENTLE reminders to include this
Make sure the firmware file and twrp recovery are in your Android directory on your PC - Mine is
C:\Users\Grentuu\AppData\Local\Android\android-sdk\platform-tools\
During this process you may find that when you reboot the phone starts to boot into android. Mine did but simply had the GPE animated logo but never entered GPE. All you do is press Vol up and power for about 10 seconds to reset. As soon as it resets press vol down and power to get back to bootloader.
Flash 1.54.401.5 firmware from Here
Fastboot Method
Boot device into FASTBOOT mode either by adb reboot bootloader or Vol down & Power (device should show FASTBOOT USB)
Make sure the firmware file to be flashed is in your android folder
Open a command prompt from the folder where fastboot resides. (Hold shift key/right click in the dir to get menu - left click on Open Command Prompt here.)
Run the following commands:
fastboot oem rebootRUU (this will reboot the device into RUU mode in preparation for zip flashing)
fastboot flash zip 1.54.401.5-W_Splash.zip (the name of the zip should EXACTLY match the name of the file you're flashing)
It will fail the first time. Run the same command AGAIN until you see it has flashed successfully.
I repeat - Run the same command TWICE until you see it has flashed successfully.
Once complete, type fastboot reboot-bootloader The hyphen is required.
Some users have stated this firmware (1.54.401.5) did not work for them as they weren't GSM and reboots just threw them back to recovery. If this happens try a stock (your original e.g. T-mobile) firmware then follow the rest of the process.
Boot into stock recovery
Factory reset
Reboot into bootloader
Flash TWRP - command = fastboot flash recovery openrecovery-twrp-2.7.0.2-m8.img (The must match exactly the name of the recovery you are flashing and remember the recovery file must be in your android folder)
Boot into TWRP
Go into Wipe menu
do a full factory reset wipe
Reboot back into recovery
Install rom
Profit
These have worked for me everytime (Change count =19)

Thanks for this. I'm about to give it a shot now.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
---------- Post added at 05:08 PM ---------- Previous post was at 04:40 PM ----------
For some reason the firmware wont flash in twrp. Should I sideload the firmware?
Sent from my GT-P5210 using XDA Premium 4 mobile app

To flash a firmware you must be in bootloader/fastboot mode.
Fastboot oem rebootRUU
Fastboot flash zip firmwarefilename.zip
Then again
Fastboot flash zip firmwarefilename.zip
Fastboot reboot-bootloader

exad said:
To flash a firmware you must be in bootloader/fastboot mode.
Fastboot oem rebootRUU
Fastboot flash zip firnwarefilename.zip
Then again
Fastboot flash zip firnwarefilename.zip
Fastboot reboot-bootloader
Click to expand...
Click to collapse
Thanks. Understood, I was just reviewing my steps for the conversion. I really just want to try out that new Sense rom and then I'll probably revert back. BRB...I'll let you know how it goes.

Bear in mind you must have S-off to flash a firmware that way.

exad said:
To flash a firmware you must be in bootloader/fastboot mode.
Fastboot oem rebootRUU
Fastboot flash zip firmwarefilename.zip
Then again
Fastboot flash zip firmwarefilename.zip
Fastboot reboot-bootloader
Click to expand...
Click to collapse
Those are the instructions in post 1 the original thread.
The issue is with people wanting to go back to sense

This thread is about returning to sense. Flashing a firmware is always the same. It's the firmware itself that's different...

Here is where I am at..
I converted to GP easily and it worked well.. I wanted to convert back so I installed twrp first, then through twrp installed the 1.54.401.5 firmware.
Installing that firmware removed twrp and the rom. So I am without an OS at all, and have stock recovery.
Is there anyway I can flash a custom recovery or a rom via the stock firmware/recovery?
My computer will not recognize adb devices. But it used to obviously.
I have an SD card.
Any help and I will be sooo grateful. (maybe even donate)
Thanks!

You can't flash a firmware through recovery... You can flash a stock recovery after the steps listed above if you like. See the stock backup thread.
You can flash any recovery through fastboot... Adb only works with the rom booted or with custom recovery booted.

Thanks will try it out.

exad said:
You can't flash a firmware through recovery... You can flash a stock recovery after the steps listed above if you like. See the stock backup thread.
You can flash any recovery through fastboot... Adb only works with the rom booted or with custom recovery booted.
Click to expand...
Click to collapse
So what do I do in this situation with no rom installed only 1.54 firmware and stock recovery.

Flash twrp

exad said:
Flash twrp
Click to expand...
Click to collapse
I have no rom installed, so it wont show in adb devices.

PunchLick said:
I have no rom installed, so it wont show in adb devices.
Click to expand...
Click to collapse
You flash recovery via fastboot, no need for a rom.
Just make sure you have the proper fastboot drivers from htc.

Dmaxon said:
You flash recovery via fastboot, no need for a rom.
Just make sure you have the proper fastboot drivers from htc.
Click to expand...
Click to collapse
ADB devices shows no devices. If i had custom recovery this would be so much easier, but im using 1.54.401.5 firmware with stock recovery and no ROM.
Just dont know what to do to get a working device again. All i can do is boot into stock recovery, hboot and fastboot.. but computer shows no device.

PunchLick said:
ADB devices shows no devices. If i had custom recovery this would be so much easier, but im using 1.54.401.5 firmware with stock recovery and no ROM.
Just dont know what to do to get a working device again. All i can do is boot into stock recovery, hboot and fastboot.. but computer shows no device.
Click to expand...
Click to collapse
I would recommend the All-In-One Toolkit. This will allow you to fastboot the recovery, even though the pc doesn't recognize it. This has worked for me in the past.
Meanwhile, I get the following error message when attempting to flash the 1.54...
Any suggestions guys???
Problem solved. I had not supercid. After I did that, I was able to successfully flash 1.54...

Why post steps if your not willing to help?
The steps in the OP can still cause issues for some people.
Sent from my HTC One_M8 using Tapatalk

Ideas4ya said:
I would recommend the All-In-One Toolkit. This will allow you to fastboot the recovery, even though the pc doesn't recognize it. This has worked for me in the past.
Meanwhile, I get the following error message when attempting to flash the 1.54...
Any suggestions guys???
Problem solved. I had not supercid. After I did that, I was able to successfully flash 1.54...
Click to expand...
Click to collapse
Can you elaborate a little on which options etc, because that sounds fantastic and would help me so much!

PunchLick said:
Can you elaborate a little on which options etc, because that sounds fantastic and would help me so much!
Click to expand...
Click to collapse
When you open the all in one...the 3rd option on the top right is what you need. Follow the step, even if fastboot says device is not connected, this will still send the recovery to your device as long as you're in the bootloader.

I will never understand why people play with there phones and have no understanding of adb and fastboot commands with the bootloader. if people would learn that first there wouldn't be so many threads when they get stuck. tool kits are bad it makes people lazy. but I appreciate the devs who make them

Stuck In BootLoop While updating lollipop

i used nexus root tool kit to update nexus 4 from 4.4 to 5.0... all done in pc but mobile is stuck in boot loop. can anyone tell me how can i restore my phone to normal working...
Please help me i am noob here

is there any one who can help me here
i thought i will get ans with in 1hr... still waiting if someone can help

letsnexus said:
i thought i will get ans with in 1hr... still waiting if someone can help
Click to expand...
Click to collapse
This is why we don't recommended using tool kits. You should try flashing the factory image using fastboot.
Sent from my Nexus 9 using XDA Free mobile app

Same here, i tried re-flashing many times. Darn that nexus root toolkit

any suggetion or link which can help me to use fastboot use and install stock rom
thank alot for help

I am currently in the same position ! Used a toolkit too, always have.

This is why you never use a Toolkit, it's always been mentioned around in XDA that this has always been a developer website of learning and knowledge. You must always know what goes on behind than just blindly flashing things. It's a rule of thumb that you're more likely to brick your phone with a Toolkit than by yourself. Easiest step as follows.
1. Download factory image
2. Download ADB files
3. Make a folder and extract the adb files and factory image inside the same folder.
4. Plug the phone in bootloader mode or simply type adb reboot bootloader (Developer options must be enabled and USB Debugging) by exiting the folder, holding shift, right clicking the folder and pressing open command window and typing the command.
5. Every factory image comes with a flashall.bat, double click it and voila. Updates like it should. (User data will be wiped)
If you don't want your userdata to be wiped, simply open flashall.bat with notepad++, erase the '-w' in "fastboot -w update image" and save the file and launch it again.
Sent from my HTC One_M8 using Tapatalk

I will try that way later when I get in, I would have assumed that the toolkit did exactly those steps though, just an easy to use frontend

hazwheel said:
I will try that way later when I get in, I would have assumed that the toolkit did exactly those steps though, just an easy to use frontend
Click to expand...
Click to collapse
Go to stock recovery and do factory data reset and reboot phone. First time boot takes very long time (around 10 to 15 minutes). After successfully boot into android L check for the storage space. If it says only 5 GB available instead of 12 GB (My nexus is 16GB) then Go to Settings > Backup & Reset and select Factory data reset.
I had experienced these issues when upgrading to Lollypop and solved them on my own.
Note: If you were not able to boot into stock recovery, try twrp recovery. you have to install it using fastboot
fastboot flash recovery <filename.img>

letsnexus said:
any suggetion or link which can help me to use fastboot use and install stock rom
thank alot for help
Click to expand...
Click to collapse
although the link is for kitkat but the same method applies to flashing lollipop
http://forum.xda-developers.com/nexus-4/general/how-to-how-to-flash-factory-image-t2010312

moorthidaniel said:
Go to stock recovery and do factory data reset and reboot phone. First time boot takes very long time (around 10 to 15 minutes). After successfully boot into android L check for the storage space. If it says only 5 GB available instead of 12 GB (My nexus is 16GB) then Go to Settings > Backup & Reset and select Factory data reset.
I had experienced these issues when upgrading to Lollypop and solved them on my own.
Note: If you were not able to boot into stock recovery, try twrp recovery. you have to install it using fastboot
fastboot flash recovery <filename.img>
Click to expand...
Click to collapse
OK, I was able to get into recovery with this method, and wipe but I get can't mount cache errors during the wipe , waiting for the phone to reboot now, hopefully it will and get out of the bootloop. stupid thing is I'm not a noob, but stumped by this. Good excuse to upgrade to the N5 I guess
---------- Post added at 03:14 PM ---------- Previous post was at 02:55 PM ----------
Wow, this method worked! Brilliant! Thanks, and dammit, it worked, 10 minutes after she agreed to me getting am upgrade !

For all of you whom are stuck in bootloop a fastboot oem lock comand when in fastboot will solve the problem.
So go into bootloader and run "fastboot oem lock" for some reason on some devices Android 5.0 won't boot with unlocked bootloader.

hazwheel said:
OK, I was able to get into recovery with this method, and wipe but I get can't mount cache errors during the wipe , waiting for the phone to reboot now, hopefully it will and get out of the bootloop. stupid thing is I'm not a noob, but stumped by this. Good excuse to upgrade to the N5 I guess
---------- Post added at 03:14 PM ---------- Previous post was at 02:55 PM ----------
Wow, this method worked! Brilliant! Thanks, and dammit, it worked, 10 minutes after she agreed to me getting am upgrade !
Click to expand...
Click to collapse
OK great. Cheers, I helped someone today in this forum.

bett3rthan said:
For all of you whom are stuck in bootloop a fastboot oem lock comand when in fastboot will solve the problem.
So go into bootloader and run "fastboot oem lock" for some reason on some devices Android 5.0 won't boot with unlocked bootloader.
Click to expand...
Click to collapse
That did NOT work for me, the getting into recovery and wiping the device DID work though.
---------- Post added at 04:05 PM ---------- Previous post was at 04:03 PM ----------
moorthidaniel said:
OK great. Cheers, I helped someone today in this forum.
Click to expand...
Click to collapse
Yes, Thanks, unfortunately, she has withdrawn the offer of an early upgrade :silly:

thax
Misledz said:
This is why you never use a Toolkit, it's always been mentioned around in XDA that this has always been a developer website of learning and knowledge. You must always know what goes on behind than just blindly flashing things. It's a rule of thumb that you're more likely to brick your phone with a Toolkit than by yourself. Easiest step as follow
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Thank you alot, you help in really good manner
and teached us not to use toolkit
will learn more abt rooting and flashing thank you once again

I am hitting this problem now, I got a OTA. After restarting its keep on looping waiting for more than 20mins still it's looping.

Tried going to boot-menu and did factory reset and it booted good after ~10 mins.

sububack said:
I am hitting this problem now, I got a OTA. After restarting its keep on looping waiting for more than 20mins still it's looping.
Click to expand...
Click to collapse
Power off, hold Vol Down + Power, when you get to the Android laying down, press volume up + pwr, then wipe the /cache from the menu (you do not need to do a full factory wipe, just wiping cache will do), and then reboot and wait. It will boot this time properly. @WugFresh is aware of the issue and said will put a fix in 1.9.9 for the N4

Thanks , I have tried clearing the cache and started waiting for an hour. Since it was still looping tried after factory reset/wiping user data. And then after 10min it came good.

I post this on Google Product Forum 2 days ago. Hope it helps
https://productforums.google.com/fo...ce=footer#!msg/nexus/Lv8fHtyJOPQ/wDzRUm4b2UsJ
(updated 29/11/2014)[not perfect but it is a SOLUTION]
The idea of this is to downgrade your nexus 4 without wiping your data, which means stuff you will need includes:
1. adb and fastboot on your computer (I am using mac but you can find it on windows as well. There are tones of website and forums telling you the latest method of getting it onto your computer)
2. factory image of nexus 4(I use 4.4.4, since that's what it was. I don't have the time and energy to try to do the same thing with lollipop. you can try can leave a comment).
update: do NOT try to flash 5.0 rom using this method. You will be stuck at boot loop again
3. usb cable
4. nexus 4 with unlocked bootloader(the process of unlocking bootloader will wipe your device)
5. computer
steps
1. unzip the factory image (something.tgz)
2. for me, after unzipping the .tgz, I still find another .zip inside. unzip that too.
3. hold vol+, vol-, and power button simultaneously to enter fastboot mode
4. open terminal(mac)(it would probably be cmd for windows)
5. connect your nexus 4(in fastboot)
6. to make sure it connect successfully, type "fastboot devices". if something like "005040c0d54bb291 fastboot" appears, you are good. Otherwise, try reconnect your device/boot to fastboot again/use another usb cable
7.now we need to tell the terminal to navigate to the location of the unzipped factory image. to do that, i suggest you put the unzipped folder to somewhere easy to find, like desktop. these are some commands to help you navigate:
"ls" allows you to look at whats inside the current directory of the terminal. For example, this is the output after typing "ls" for me:
some folder Photos
nexus4image.tgz how many folders do you have
5.zip occam-ktu84p
more folder occam-ktu84p.zip
after knowing where you are, use "cd" (below) to go to your folder
"cd" means change directory. For example. "cd Photos" will brings me to the "Photos" folder. And then if I type ls, I will see a whole bunch of photos in my photos. If you go to the wrong folder, type "cd ..", and it will bring you back to the previous folder.
8. flash bootloader.
enter the following command, BUT REMEMBER TO CHANGE THE NAME TO FIT YOURS(DIFFERENT VERSIONS HAVE SLIGHTLY DIFFERENT FILE NAME AT THE END(type ls first to help you type the correct name)
fastboot flash bootloader bootloader-mako-makoz30d.img
9. reboot bootloader. just copy and paste
fastboot reboot-bootloader
10. flash radio
enter the following command, BUT REMEMBER TO CHANGE THE NAME TO FIT YOURS(DIFFERENT VERSIONS HAVE SLIGHTLY DIFFERENT FILE NAME AT THE END(type ls first to help you type the correct name)
fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1701.03.img
11. reboot bootloader. just copy and paste
fastboot reboot-bootloader
12. flash system
system.img is located inside the zip, use ls to help you navigate. This steps takes the longest time, total time on this step is 87 seconds while the others are less then 1 second
fastboot flash system system.img
13. flash boot
boot.img is located inside the zip, use ls to help you navigate.
fastboot flash boot boot.img
14. flash recovery
fastboot.img is located inside the zip, use ls to help you navigate.
fastboot flash recovery recovery.img
15. format cache(not the memory, so everything should be fine)
fastboot format cache
16. reboot and wait
this will reboot your device. You probably have to wait for a while to initialise all the apps. after than you are good to go!
fastboot reboot
credit: my friend for giving me this idea + http://forum.xda-developers.com/nexus-4/general/how-to-how-to-flash-factory-image-t2010312 + HelpMyNexus

Need help recovering my nexus 6p!

Hi,
So I seemed to have messed up my nexus 6p. I was flashing a custom rom and it would boot so i decided to flash the vendor.img first and then re-flashed the rom as it stated in the instructions for the rom. Now i am stuck as the nexus wont boot up still. I am still able to boot into recovery - currently at TWRP 3.0.0.
I was trying to use fastboot to recover the nexus to stock but it seems like i am not able to boot into fastboot mode. i see the green android screen with the writing at the bottom which states that the bootloader is unlocked but i never get the Fastboot mode written on it on the top no matter how many times i reboot the device. I even tried toolkits but nothing seemed to work.
Also, in TWRP i am not able to see any files or my backups. its like everything just disappeared from my device. I am not able to connect the device to the computer when im in twrp either, so i cant put older roms that worked.
Any suggestions/help is much appreciated!
thanks
LA.

When you go into your recovery and connect the phone to the computer, does it read on the computer MTP?
When you go into twrp, do you have something unmounted by default?
I don't know about the fastboot, but this is weird, Have you tried to access the bootloader from twrp?

matteosaeed said:
When you go into your recovery and connect the phone to the computer, does it read on the computer MTP?
When you go into twrp, do you have something unmounted by default?
I don't know about the fastboot, but this is weird, Have you tried to access the bootloader from twrp?
Click to expand...
Click to collapse
ok, so when in recovery and i connect the phone, the computer doesnt read.
when im in twrp it asks me for a password but i hit next and choose the option to enable changes to the file system. no drives seem to be unmounted but i dont see my downloads folder or any of the folders i used to see before.
and i am able to access the bootloader but not get into fastboot mode to use adb, also when in bootloader mode, my phone doesnt get recognized with my computer. And yes full sdk is installed with latest updated drivers.
thanks for your response.

Asmodic said:
ok, so when in recovery and i connect the phone, the computer doesnt read.
when im in twrp it asks me for a password but i hit next and choose the option to enable changes to the file system. no drives seem to be unmounted but i dont see my downloads folder or any of the folders i used to see before.
and i am able to access the bootloader but not get into fastboot mode to use adb, also when in bootloader mode, my phone doesnt get recognized with my computer. And yes full sdk is installed with latest updated drivers.
thanks for your response.
Click to expand...
Click to collapse
Well, this is good, if twrp is asking you for a password, it means that something is encrypted. Also, I had an issue with TWRP 3.0 before I updated to the latest version.
Check out this thread on reddit.
---------- Post added at 09:06 PM ---------- Previous post was at 09:05 PM ----------
Asmodic said:
ok, so when in recovery and i connect the phone, the computer doesnt read.
when im in twrp it asks me for a password but i hit next and choose the option to enable changes to the file system. no drives seem to be unmounted but i dont see my downloads folder or any of the folders i used to see before.
and i am able to access the bootloader but not get into fastboot mode to use adb, also when in bootloader mode, my phone doesnt get recognized with my computer. And yes full sdk is installed with latest updated drivers.
thanks for your response.
Click to expand...
Click to collapse
Also check this out, it might help

matteosaeed said:
Well, this is good, if twrp is asking you for a password, it means that something is encrypted. Also, I had an issue with TWRP 3.0 before I updated to the latest version.
Check out this thread on reddit.
---------- Post added at 09:06 PM ---------- Previous post was at 09:05 PM ----------
Also check this out, it might help
Click to expand...
Click to collapse
Ok so i looked at the reddit thread and its saying the phone is encrypted which is why its asking for a password but i dont remember encrypting the phone. i always used my fingerprint to unlock the device. any thoughts as to what the password could be? :S
thanks for all your help!

Why don't you just go to Heisenberg's guide in the general section and flash the latest stock images from Google via Fastboot and start from there? This way you'll at least have a working phone to boot into. From there you can reflash custom recovery and even systemless root. This is what I have always done when the phone wouldn't boot, or I had a backup handy and flashed that. When in trouble just flash latest images.

Asmodic said:
Hi,
So I seemed to have messed up my nexus 6p. I was flashing a custom rom and it would boot so i decided to flash the vendor.img first and then re-flashed the rom as it stated in the instructions for the rom. Now i am stuck as the nexus wont boot up still. I am still able to boot into recovery - currently at TWRP 3.0.0.
I was trying to use fastboot to recover the nexus to stock but it seems like i am not able to boot into fastboot mode. i see the green android screen with the writing at the bottom which states that the bootloader is unlocked but i never get the Fastboot mode written on it on the top no matter how many times i reboot the device. I even tried toolkits but nothing seemed to work.
Also, in TWRP i am not able to see any files or my backups. its like everything just disappeared from my device. I am not able to connect the device to the computer when im in twrp either, so i cant put older roms that worked.
Any suggestions/help is much appreciated!
thanks
LA.
Click to expand...
Click to collapse
Bootloader mode is fastboot mode, it never actually says fastboot mode on the screen, so if you're in the bootloader screen you're in fastboot mode and fastboot commands will work. Follow the instructions in my guide to return to stock:
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928

Sounds like you need to update you drivers if your computer is not recognizing it

Asmodic said:
Ok so i looked at the reddit thread and its saying the phone is encrypted which is why its asking for a password but i dont remember encrypting the phone. i always used my fingerprint to unlock the device. any thoughts as to what the password could be? :S
thanks for all your help!
Click to expand...
Click to collapse
Any Luck?

it's because you don't have the NEWEST version of TWRP.
Even the simplest of searches would've come up with this answer.

If your phone stuck at bootloop just go to recovery and wipe cache it will work.

pankajste said:
If your phone stuck at bootloop just go to recovery and wipe cache it will work.
Click to expand...
Click to collapse
No it won't, not in this situation.

Heisenberg said:
Bootloader mode is fastboot mode, it never actually says fastboot mode on the screen, so if you're in the bootloader screen you're in fastboot mode and fastboot commands will work. Follow the instructions in my guide to return to stock:
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
Click to expand...
Click to collapse
Thanks so much it worked. I used the guide and was able to adb flash back to stock.
Cheers!!

Asmodic said:
Thanks so much it worked. I used the guide and was able to adb flash back to stock.
Cheers!!
Click to expand...
Click to collapse
So this should be marked "Solved?"

It should be marked as "when in trouble revert to Heisenberg's guide."

Root HTC Bolt

Hey Everyone....So I just have a question about the HTC BOLT and how to root it
So I guess I am little confused as to how do I go about this in terms of rooting it
My phone must be unlocked through the htc dev site correct? If so then I am good with that step, I also have seen many posts on how to root it but I just need one general site or a way on how to do it...Last thing I want to do is screw this up and brick the phone from reading multiple posts...So any information would def help me...Currently I am on Nougat 7.0
Thanks
Jay

jortiz31877 said:
Hey Everyone....So I just have a question about the HTC BOLT and how to root it
So I guess I am little confused as to how do I go about this in terms of rooting it
My phone must be unlocked through the htc dev site correct? If so then I am good with that step, I also have seen many posts on how to root it but I just need one general site or a way on how to do it...Last thing I want to do is screw this up and brick the phone from reading multiple posts...So any information would def help me...Currently I am on Nougat 7.0
Thanks
Jay
Click to expand...
Click to collapse
you'll need to flash twrp from download mode, then boot into twrp & either flash SuperSU or Magisk v11.1
my preference is now Magisk, as it now has it's own root plus you can install magisk modules (mods or ROM) without breaking /system

Thanks for the information, So i went to the htc dev site to proceed on how to unlock bootload my phone and they mentioned about "fast boot' that is not a option that needs to be selected on my phone while in download mode ...So can i still unlock it with out that "fast boot " option?

jortiz31877 said:
Thanks for the information, So i went to the htc dev site to proceed on how to unlock bootload my phone and they mentioned about "fast boot' that is not a option that needs to be selected on my phone while in download mode ...So can i still unlock it with out that "fast boot " option?
Click to expand...
Click to collapse
you said u were good w/ that step so I didn't mention....fastboot is not an option in the menu, it's a tool...you need to use fastboot command to unlock bootloader & also to flash twrp
install this for fastboot: https://forum.xda-developers.com/showthread.php?t=2317790

Okay so I know the phone must be connected using the command terminals and to simplify this i would:
1- Use fastboot to get the phone unlocked using the code to unlock it then (NOT Choosing to flash a rom at all for my phone)
2- use use maglsk v11.1 or Super Su and follow the instructions while leaving the phone plugged into the PC
3- once done then go to the play store and update magisk manager
4 - Check any rooted apk via the play store to verify if your phone is rooted
If there is something that i am missing please let me know. Much appreciations so far getting me to this point.

jortiz31877 said:
Okay so I know the phone must be connected using the command terminals and to simplify this i would:
1- Use fastboot to get the phone unlocked using the code to unlock it then (NOT Choosing to flash a rom at all for my phone)
2- use use maglsk v11.1 or Super Su and follow the instructions while leaving the phone plugged into the PC
3- once done then go to the play store and update magisk manager
4 - Check any rooted apk via the play store to verify if your phone is rooted
If there is something that i am missing please let me know. Much appreciations so far getting me to this point.
Click to expand...
Click to collapse
after unlocking bootloader, you will need to flash twrp (fastboot flash recovery nameofrecovery.img), the twrp.img needs to be in you sdktools folder on pc, after flashing, then boot into twrp...from download mode, choose reboot to bootloader, then reboot to recovery. once in twrp, you should probably leave /system read only, then copy either supersu or magisk to sd card, and choose install from main menu of twrp....once done, boot device. if using magisk, update from store
u only need to connect to pc when entering fastboot cmds

will this root work with boost mobile HTC bolt or is there a root that will work for this phone

Chrism1971 said:
will this root work with boost mobile HTC bolt or is there a root that will work for this phone
Click to expand...
Click to collapse
Either should work fine
Sent from my unknown using XDA Labs

Question
OMJ said:
you'll need to flash twrp from download mode, then boot into twrp & either flash SuperSU or Magisk v11.1
my preference is now Magisk, as it now has it's own root plus you can install magisk modules (mods or ROM) without breaking /system
Click to expand...
Click to collapse
Look I know you know what your doing I just barley got into rooting my android devices so my question is will this Brick my phone because last time I tried kingroot and it lock everything. I am scared to lose my warranty on my phone and want to know it will work. I had to take my phone to a sprint tech store last time to get it fixed so I was wondering if you could make a video of how to do it. Thanks for your time and effort Sam.

craftingatic said:
I am scared to lose my warranty on my phone.
Click to expand...
Click to collapse
You will lost your warranty anyway, if you open the bootloader via HTCdev.

craftingatic said:
Look I know you know what your doing I just barley got into rooting my android devices so my question is will this Brick my phone because last time I tried kingroot and it lock everything. I am scared to lose my warranty on my phone and want to know it will work. I had to take my phone to a sprint tech store last time to get it fixed so I was wondering if you could make a video of how to do it. Thanks for your time and effort Sam.
Click to expand...
Click to collapse
1st...as far as warranty goes, HTC is pretty good about repair even if you unlock the bootloader. So if you unlock bootloader, then flash TWRP & root, I always recommend restoring to stock before having any warranty work done.
sorry I don't do videos, but I'm always willing to help out...it's really not very difficult, the risk of a brick is very low if u just follow the instructions...if you're just looking for root, here are the basic steps:
1. unlock bootloader via htcdev.com (you'll have to create a account)
-when selecting the device, choose "all other supported models"
-you'll need to install drivers to pc to communicate to phone, see "required resources" to the left of step 1
-you don't need to install SDK but you will need the fastboot binary in step 4
-at step 5 make sure you are communicating w/ the device by using the cmd fastboot devices, it should list your device in the output
-follow the remaining steps to unlock
2. once bootloader is unlocked, boot back into download mode to flash twrp (custom recovery)
-download latest twrp from here: https://dl.twrp.me/aca/ copy the twrp.img to the folder that has the fastboot binary
-use this cmd to flash twrp: fastboot flash recovery twrp-3.1.1-0-aca.img
-it flashes pretty quick, then boot to bootloader, then boot to recovery
3. 1st time u boot twrp it will ask if u want to keep /system read only, if u plan to stay stock w/ only root, then keep read only
-I always recommend to make a system & boot image backup just in case
-flash MagiskSU or SuperSU, I prefer Magisk
the Sprint ROM has a lot of bloat, if you're interested, I have a ROM posted that cleans all that junk up along with a lot of useful mods, with a stock look

OMJ said:
1st...as far as warranty goes, HTC is pretty good about repair even if you unlock the bootloader. So if you unlock bootloader, then flash TWRP & root, I always recommend restoring to stock before having any warranty work done.
sorry I don't do videos, but I'm always willing to help out...it's really not very difficult, the risk of a brick is very low if u just follow the instructions...if you're just looking for root, here are the basic steps:
1. unlock bootloader via htcdev.com (you'll have to create a account)
-when selecting the device, choose "all other supported models"
-you'll need to install drivers to pc to communicate to phone, see "required resources" to the left of step 1
-you don't need to install SDK but you will need the fastboot binary in step 4
-at step 5 make sure you are communicating w/ the device by using the cmd fastboot devices, it should list your device in the output
-follow the remaining steps to unlock
2. once bootloader is unlocked, boot back into download mode to flash twrp (custom recovery)
-download latest twrp from here: https://dl.twrp.me/aca/ copy the twrp.img to the folder that has the fastboot binary
-use this cmd to flash twrp: fastboot flash recovery twrp-3.1.1-0-aca.img
-it flashes pretty quick, then boot to bootloader, then boot to recovery
3. 1st time u boot twrp it will ask if u want to keep /system read only, if u plan to stay stock w/ only root, then keep read only
-I always recommend to make a system & boot image backup just in case
-flash MagiskSU or SuperSU, I prefer Magisk
the Sprint ROM has a lot of bloat, if you're interested, I have a ROM posted that cleans all that junk up along with a lot of useful mods, with a stock look
Click to expand...
Click to collapse
Do u have to rename the twrp to tarp.img? I flashed the latest tarp the direction I saw said rename twrp so did I do it wrong cause I can't boot into twrp at all I get HTC and some red text then boots all the way up

roadkill42 said:
Do u have to rename the twrp to tarp.img? I flashed the latest tarp the direction I saw said rename twrp so did I do it wrong cause I can't boot into twrp at all I get HTC and some red text then boots all the way up
Click to expand...
Click to collapse
twrp can be named anything u want, your fastboot flash cmd just has to match...when u try to boot into recovery & get a red triangle, that's stock recovery, so yeah it didn't flash then

OMJ said:
twrp can be named anything u want, your fastboot flash cmd just has to match...when u try to boot into recovery & get a red triangle, that's stock recovery, so yeah it didn't flash then
Click to expand...
Click to collapse
OK did it twice it said it did with no errors so just keep doing it till it dose? Or is there another way?
---------- Post added at 04:35 PM ---------- Previous post was at 04:34 PM ----------
roadkill42 said:
OK did it twice it said it did with no errors so just keep doing it till it dose? Or is there another way?
Click to expand...
Click to collapse
No triangle just HTC in gray then flashes red letters under it

roadkill42 said:
OK did it twice it said it did with no errors so just keep doing it till it dose? Or is there another way?
---------- Post added at 04:35 PM ---------- Previous post was at 04:34 PM ----------
No triangle just HTC in gray then flashes red letters under it
Click to expand...
Click to collapse
you should only need to flash twrp once....
post your cmds so I can see what you're doing....make sure you're in download mode

OMJ said:
you should only need to flash twrp once....
post your cmds so I can see what you're doing....make sure you're in download mode
Click to expand...
Click to collapse
OK I was in download mode I c what I can do on the rest thanks probly later today or tomorrow

roadkill42 said:
OK I was in download mode I c what I can do on the rest thanks probly later today or tomorrow
Click to expand...
Click to collapse
Is there a complete in full detail way of flashing tarp in download load mode?

roadkill42 said:
Is there a complete in full detail way of flashing tarp in download load mode?
Click to expand...
Click to collapse
full detail? it's 1 cmd.... fastboot flash recovery twrp.img
https://twrp.me/htc/htcbolt10evo.html

OMJ said:
full detail? it's 1 cmd.... fastboot flash recovery twrp.img
https://twrp.me/htc/htcbolt10evo.html
Click to expand...
Click to collapse
OK thanks there is a lot out there I might did wrong one I try this way and let u know thanks again is there a special key combo to get into twrp after flashing ?

Microsoft Windows [Version 10.0.14393]
(c) 2016 Microsoft Corporation. All rights reserved.
C:\Program Files\Minimal ADB and Fastboot>adb devices
List of devices attached
HT7120403511 device
when i try to reboot to recovery under the htc says this build for devloping purpose only im on n with no updates installed this phone came to me like this bran new
C:\Program Files\Minimal ADB and Fastboot>fastboot flash recovery twrp.img
sending 'recovery' (8156 KB)...
OKAY [ 1.782s]
writing 'recovery'...
(bootloader) HOSD CL#821651
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 2.311s]
finished. total time: 4.096s
C:\Program Files\Minimal ADB and Fastboot>adb reboot
error: device not found
C:\Program Files\Minimal ADB and Fastboot>fastboot reboot
rebooting...
finished. total time: 0.004s
C:\Program Files\Minimal ADB and Fastboot> I'm on 7.0

A2017G Bootloader mode on 7.1.1?

EDIT: Fixed! Big thanks to @S0wL , @bkores , @tamahouse02 and @tron1 for the help. I made a guide to help other people with the same problem:
Guide to get TWRP again HERE
Okay, it seems to me that I messed up kinda badly. The phone is fully operational, but after I got to 7.0 the stock recovery replaced good ol' TWRP... which left me with an unlocked bootloader and an useless recovery. I have no root, and that's pretty much the only thing that matters to me. I downloaded @bkores 's Axon7Toolkit but there is NO way to get fastboot on the damned thing. After the program tries to get to bl mode (I assume adb reboot bootloader?) the ZTE logo flashes and the unlocked BL image appears, then the phone starts as normal.
Same thing with the leaked 7.1.1, no difference.
I tried EDL, recovery, that shady factory test mode thing, no one gives fastboot... Any ideas as to why I can't get there??+
I suspect it may be something related to the OEM unlocking option in the dev options, but it is set to ON and greyed out. so no idea

Try the menu on the boot screen.

Choose an username... said:
Okay, it seems to me that I messed up kinda badly. The phone is fully operational, but after I got to 7.0 the stock recovery replaced good ol' TWRP... which left me with an unlocked bootloader and an useless recovery. I have no root, and that's pretty much the only thing that matters to me. I downloaded @bkores 's Axon7Toolkit but there is NO way to get fastboot on the damned thing. After the program tries to get to bl mode (I assume adb reboot bootloader?) the ZTE logo flashes and the unlocked BL image appears, then the phone starts as normal.
Same thing with the leaked 7.1.1, no difference.
I tried EDL, recovery, that shady factory test mode thing, no one gives fastboot... Any ideas as to why I can't get there??+
I suspect it may be something related to the OEM unlocking option in the dev options, but it is set to ON and greyed out. so no idea
Click to expand...
Click to collapse
Sounds like the issue is with the ROM like it is somehow blocking you from accessing bootloader mode. It's definitely not my toolkit.

Choose an username... said:
Okay, it seems to me that I messed up kinda badly. The phone is fully operational, but after I got to 7.0 the stock recovery replaced good ol' TWRP... which left me with an unlocked bootloader and an useless recovery. I have no root, and that's pretty much the only thing that matters to me. I downloaded @bkores 's Axon7Toolkit but there is NO way to get fastboot on the damned thing. After the program tries to get to bl mode (I assume adb reboot bootloader?) the ZTE logo flashes and the unlocked BL image appears, then the phone starts as normal.
Same thing with the leaked 7.1.1, no difference.
I tried EDL, recovery, that shady factory test mode thing, no one gives fastboot... Any ideas as to why I can't get there??+
I suspect it may be something related to the OEM unlocking option in the dev options, but it is set to ON and greyed out. so no idea
Click to expand...
Click to collapse
Feel the same, 7.1.1 stock recovery is evil, it keep coming back after flash twrp. LOL
Here what I didi to get twrp on 7.1.1:
1. Use axon7tool -w recovery (twrp of couse)
2. Watch closely the cmd, when it said "Successful!","Reboot in 5 second" - unplug your phone
3. Use Volume Up + Power to get to recovery (twrp)
4. Mount > Mount System (dont check read only)
5. Flash something - I don't know - But I get the feeling that it stop stock recovery coming back - I personally flash Chinese Modem (because I have to ))
6. Reboot system

@bkores Yeah I'm pretty sure it's not your toolkit since I can't access it even with key comb, adb, option on the unl bl page...
@lafester Nope, tried many times. It just boots to normal whenever I select fastboot
@tamahouse02 Well I believe that should work, but I can't get axon7tool not to crash... I'll keep trying, maybe it's a driver or sth.

Choose an username... said:
@bkores Yeah I'm pretty sure it's not your toolkit since I can't access it even with key comb, adb, option on the unl bl page...
@lafester Nope, tried many times. It just boots to normal whenever I select fastboot
@tamahouse02 Well I believe that should work, but I can't get axon7tool not to crash... I'll keep trying, maybe it's a driver or sth.
Click to expand...
Click to collapse
Have you restart after install zadig driver?
1. From system: adb reboot edl
2. Install zadig driver
3. Hold "Volume Up + Power"
4. Enter system again: adb reboot edl
5. axon7tool -w recovery

tamahouse02 said:
Have you restart after install zadig driver?
1. From system: adb reboot edl
2. Install zadig driver
3. Hold "Volume Up + Power"
4. Enter system again: adb reboot edl
5. axon7tool -w recovery
Click to expand...
Click to collapse
yes, like 4 times already. I even used the stock Qualcomm COM3 drivers... no dice.
the thing is that I had to do the same when I did the stuff on android 6 and it worked after some time. I even wrote the procedure on another thread xd

Choose an username... said:
yes, like 4 times already. I even used the stock Qualcomm COM3 drivers... no dice.
the thing is that I had to do the same when I did the stuff on android 6 and it worked after some time. I even wrote the procedure on another thread xd
Click to expand...
Click to collapse
Not same my axon7tool. I use this https://forum.xda-developers.com/axon-7/development/axon7tool-flash-backup-boot-recovery-t3514254

Bootloader Mode is Disable/strip in G variant, and if this is how ZTE is headed to future updates it seems like U will have a Disable Bootloader Mode as well.
If you guy can rollback to MM , you can Unlock there using @bkores tool.

DrakenFX said:
Bootloader Mode is Disable/strip in G variant, and if this is how ZTE is headed to future updates it seems like U will have a Disable Bootloader Mode as well.
If you guy can rollback to MM , you can Unlock there using @bkores tool.
Click to expand...
Click to collapse
I was thinking about that, but does mifavor let you roll back from an SD update? I'll try later, but i doubt it.
Besides from that is there any way to flash stuff from the stock recovery? It tells me that ZIPs have to be signed only

tamahouse02 said:
Feel the same, 7.1.1 stock recovery is evil, it keep coming back after flash twrp. LOL
Here what I didi to get twrp on 7.1.1:
1. Use axon7tool -w recovery (twrp of couse)
2. Watch closely the cmd, when it said "Successful!","Reboot in 5 second" - unplug your phone
3. Use Volume Up + Power to get to recovery (twrp)
4. Mount > Mount System (dont check read only)
5. Flash something - I don't know - But I get the feeling that it stop stock recovery coming back - I personally flash Chinese Modem (because I have to ))
6. Reboot system
Click to expand...
Click to collapse
In step 1, which TWRP version did you use? The latest 3.1.0.-0 ?

dnlilas said:
In step 1, which TWRP version did you use? The latest 3.1.0.-0 ?
Click to expand...
Click to collapse
Official 3.0.4.1

@tamahouse02
The latest "official" TWRP is at TWRP site https://twrp.me/devices/zteaxon7.html , version 3.1.0-0.
Is there any problem using it instead of the previous "official" 3.0.4.1 ?
Edit: I also read on TWRP site:
"Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install."
This is in sync with your information requiring to reboot immediately to TWRP (step 2 and 3).

dnlilas said:
@tamahouse02
The latest "official" TWRP is at TWRP site https://twrp.me/devices/zteaxon7.html , version 3.1.0-0.
Is there any problem using it instead of the previous "official" 3.0.4.1 ?
Edit: I also read on TWRP site:
"Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install."
This is in sync with your information requiring to reboot immediately to TWRP (step 2 and 3).
Click to expand...
Click to collapse
I use 3.0.4.1 because I flash plenty things before without any issue, so I keep using it.
After write recovery by axon7tool, it's reboot automatically and override the recovery, that why I have to unplug to stop the reboot, and also flash all I can - fortunaeally​ it also stop recovery be overrided

@tamahouse02 sorry to ask, but is the a7tool of the link a fixed version? how does it differ from the one i have?

I've been in the same situation like you @Choose an username... Updated to nougat on G model and I had not bootloader. This is what I did :
1. Downloaded the tool from here https://forum.xda-developers.com/axon-7/development/tool-axon7toolkit-t3573108
2. Installed the driver using the install driver option that you can choose once you connect you phone to your computer
3. Use the tool to perform the unlock bootloader command again even though you have unlocked it before
4. Use the tool to install twrp, it will boot the phone in twrp
5. Flash Supersu before you boot the system first time after flashing twrp
5. Install whatever version of android want after

@S0wL Funny, I had to use Zadig to make it work. I'll try r n, thx

Choose an username... said:
@S0wL Funny, I had to use Zadig to make it work. I'll try r n, thx
Click to expand...
Click to collapse
Use Zadig then and let me know if it worked

@S0wL I can't use bootloader unlock on it, says "This option does not support your device!"
How did you do this??

Choose an username... said:
@tamahouse02 sorry to ask, but is the a7tool of the link a fixed version? how does it differ from the one i have?
Click to expand...
Click to collapse
I try your version once, but it seems not work for me, so I keep using the old one.
---------- Post added at 03:42 AM ---------- Previous post was at 03:39 AM ----------
Choose an username... said:
@S0wL I can't use bootloader unlock on it, says "This option does not support your device!"
How did you do this??
Click to expand...
Click to collapse
I thought you had already unlocked bootloader? Why have you done it twice?