I had bought the used Zmax and replaced the LCD, digitizer and new battery which solved my issue of coming on. But now that it comes on, the digitizer isn't reading where I used my finger...nothing.
Is there something that I missed when putting it back together, or something I need to do to the phone so it recognizes a new screen? I could really use some tech help.
Related
For a bit time ago i accidently broke my lcd display on my hd2, and because htc could not fix this cheap i decided to try myselvf.
first i ordered a lcd and a new digitizer and soldered them together and fixed everything just like in the video and the lcd started to work, but now my touch pad does'n work! I can't do anything
Then i took the screen out and ordered a new one from ebay which was assembled from the shop.
And same resault
what could be the problem? I have a danish hd2 and i have tried to update the firmware after i replaced the screen and digitizer and still no respond
what could be the problem?
hey, did u fix the digitizer yet. i had a similar problem. the volume buttons got stuck in and i decided to open it and fix it. right after closing it back the digitizer stopped functioning...............please let me know asap if u managed to fix urs and how u did it thanks
Same problem here
I've got the exact same problem. Replaced LCD and digitizer but it is still not working. Additionally the screen is a little yellowish. Anyone knows if this might be related and any idea who to possibly fix this?
Hi, I have exactly the same problems, even tried with 2 fresh new digitizers. Could it be that they are extremely sensitive on the inside? Or is it some glitch somewhere?
Extremely frustrating!
Sent from my HTC HD2 using XDA App
well mine is in the scrapped now. when my digitizer arrives and i sort things out i will get back to you
Hi, I bought HD2 with broken digitizer, so after it came to me I immediately buy new digitizer, didn't look for the cheapert but once again I resolve myself to never buy things for china digitizer doesn't work so I need to new one from USA, send it to my friend and he repair it within day, now everything work... and yes digitizer are very sensitive
Hi guys, i followed all the indictaions on the official videos but i think i broke something! I had an HTC hd2 with a broken digitilizer but the screen worked fine. I bought a screen+digitilzer combo and replaced it but it didnt work.
The screen does not show anything (black screen) but the backlight of it is on!
I tought maybe was a problem of that lcd so i tested the original screen (that was working) and it does the same.
What could be the problem??
Please i need help
come onn, anyone ?
please guys, anyone ??
Sounds like a defective lcd to me. I'd try an RMA asap on getting another unit before your DOA warranty (if the lcd has one) runs out.
it's not the LCD. I had a working LCD but a defective digitizer, i bought the lcd+digitizer replacement and now both screens do the same , just the backlight is on. And before i change the screens the original lcd was working fine.
Could it be because the LCD is not correctly pasted into the chassis ? i really don't know what could it be the problem. The lcd is correctly connected to the mainboard. What could i broke in the process?
Thanks connexion2005 for the help anyways, is nice to see someone finally answered hehe!
zeba5 said:
it's not the LCD. I had a working LCD but a defective digitizer, i bought the lcd+digitizer replacement and now both screens do the same , just the backlight is on. And before i change the screens the original lcd was working fine.
Could it be because the LCD is not correctly pasted into the chassis ? i really don't know what could it be the problem. The lcd is correctly connected to the mainboard. What could i broke in the process?
Thanks connexion2005 for the help anyways, is nice to see someone finally answered hehe!
Click to expand...
Click to collapse
If you were not really gental with the internal parts of the phone, more presisly the ribbons that connect each part to the main board you could have cause micro cracks in the copper strips of the ribbons. Look at the closely with a magnifying. glass if possible.
today i was able to sync it literally with no idea of what i was touching. I also figured that the digitizer works , i was able it dial some numbers. The phone appears to work.
So, Backlight is on, Touch (digitizer) also works, but not showing anything on the LCD.
Could it be a mainboard problem ?? I'm trying to use logic because i don't know anything about cellphones and how do they work in terms of components.
Could it be the ribbon ? I dont think so, i have two screens and both of them do the same (backlight on but not showing anything).
I'm clueless!
Don`t panic. Calm down, watch a demolution tuturial. You probably miss smt. Good luck
But it could be a ribbon...
Hey guys,
I have a problem. A week ago I dropped my hd2 and the screen was smashed. I took it to the service and they replaced the digitizer. Now, as it turned out the lcd displays badly and the say it has to also be replaced. I know that after the drop the lcd worked fine. Now it looks like this: http://img857.imageshack.us/i/imag0001u.jpg
My question is - is this broken lcd? it has to be removed? or can I do something with it? is it the fault and they've done something wrong?
Thanks for answers.
Wrong forum.
Btw if your screen was working fine before you sent it, then its simple as sending the phone back and asking them to replace the screen coz they've done a ****ty(pardon my french) job on that, mate. They either were careless when separating the digitizer from the screen or they've just replaced it with a different 1(not even tested probably).
Still their fault, sent it back, simples.
So I bought a HD2 with bad touch screen. The issue was the very common one that every one knows, red button that was poking into the touch screen flex cable. I opened up the phone and fixed the issue and touch screen was working perfectly fine. In the process, unfortunately, I chipped a little edge of the front glass/digitizer. It was not a big deal as phone was still working fine. But I decided to buy a new front glass.
When my new front glass arrived, I separated the digitizer/front glass from LCD, but then half of my LCD got corrupted. So I ended up buying an LCD too!!!
Now comes the issue: when I put the phone together, touch screen doesn't work at all. I have tried all combinations of NEW / OLD digitizer and NEW / OLD lcd. Nothing works. I wonder if anyone can help me figure out why?
P.S. When testing, I happened to connect the phone to my 5w wall charger directly connecting it to power pins (without battery installed). Would that be why I lost touch? Is the touch issue now because of motherboard that was directly connected to adapter, not getting power from its designated battery?
have you tried the old lcd with old digitizer (which was working)?
tried it before replacing?
did you made some change to the software before replacing?
I currently have this problem too while trying to revive my old- almost 3 years inactive- HD2 with new touchscreen, and still trying to figure out where is the problem
b3rvirus said:
have you tried the old lcd with old digitizer (which was working)?
tried it before replacing?
did you made some change to the software before replacing?
I currently have this problem too while trying to revive my old- almost 3 years inactive- HD2 with new touchscreen, and still trying to figure out where is the problem
Click to expand...
Click to collapse
Yes I had tried the old LCD, and that didn't work either.
I installed a WiFi Keyboard on it.
Did you resolve this issue?
SM-G530T1 backlight only after replacing LCD with SM-G5308W_LCD by "inhouse"
I have a SM-G530T1, unlocked and the digitizer and LCD had broken. I replaced them and all seemed fine, but then the digitizer died on me and in the midst of removing it, the new LCD cracked. I replaced it, and had issues with the new one, seemed like the connector was loose, and I had to constantly reseat it. So I replaced it again, and when I powered it on, the backlight would flash on then off, and that was all, it stayed black. I replaced it 3 more times with the SAME ISSUE. I was positive my display connector was bad, though it looked perfect, and I posted a hail-mary on Reddit and had someone say they had the SAME issue, until they got an OEM lcd.
The LCD I got, well all of them, were from Amazon, and were about $25 for the LCD & Digitizer together. The model is SM-G5308W_LCD _FPCB_REV0.6 and the brand printed on it says "2014.09_17 inhouse" All of the displays are like that. So does anyone have any experience with these?