If anyone wanna test... i have got an oreo op5 build with op5 dt included and some blobs. Maybe it would boot
But you should be able to know how to get logs
darkobas said:
If anyone wanna test... i have got an oreo op5 build with op5 dt included and some blobs. Maybe it would boot
But you should be able to know how to get logs
Click to expand...
Click to collapse
If needed, i can assist.
NisseGurra said:
If needed, i can assist.
Click to expand...
Click to collapse
https://darkobas.ddns.net:8443/zl1/omni-8.0.0-20171127-oneplus5-HOMEMADE.zip
I'm downloading... Thanks...
Στάλθηκε από το ONEPLUS A5010 μου χρησιμοποιώντας Tapatalk
darkobas said:
https://darkobas.ddns.net:8443/zl1/omni-8.0.0-20171127-oneplus5-HOMEMADE.zip
Click to expand...
Click to collapse
Thanks, will it enforce encryption?
Yes
Tested it: no boot, reboots into fast boot
DocRambone said:
Tested it: no boot, reboots into fast boot
Click to expand...
Click to collapse
I discovered that behavior when testing unmodified 5 ROMs on the 5T.
In fastboot you don't even have the option to start the system, since the kernel is not recognized.
Maybe this helps
One more try if some1 is bored
https://darkobas.ddns.net:8443/zl1/omni-8.0.0-20171129-oneplus5-HOMEMADE.zip
I should be getting mine next week... and then we should be up and running fast... if op didnt un puprose push some non working code in kernel.
mad-murdock said:
I discovered that behavior when testing unmodified 5 ROMs on the 5T.
In fastboot you don't even have the option to start the system, since the kernel is not recognized.
Maybe this helps
Click to expand...
Click to collapse
Huh. Thats interesting.... perhaps it requires signing..... chainfire posted a way to do it a while ago... if u got sone skillz its not that hard to try and sign the image
Haven't tried the latest one but..
As the omni is an oreo, we don't need the oreo fw?
DocRambone said:
Haven't tried the latest one but..
As the omni is an oreo, we don't need the oreo fw?
Click to expand...
Click to collapse
I don't think that it is mandatory...I was using omni 8 on my oneplus 3 with nougat firmware...
darkobas said:
Huh. Thats interesting.... perhaps it requires signing..... chainfire posted a way to do it a while ago... if u got sone skillz its not that hard to try and sign the image
Click to expand...
Click to collapse
Tried the latest one with and without signed boot. Same results tho: No boot and returned to fast boot only.
Will tinker a bit more tho.
Dont think fw would prevent boot. It could cause issues later on. With fp camera or audio
https://www.google.si/amp/s/forum.x...ng-boot-images-android-verified-t3600606/amp/
I will make a signed one later or 2morrow when i have time
Sp according to what chainfire wrote, unsigned images should boot if they are booted, not flashed. So u can try fastboot boot boot.img to verify this
darkobas said:
Sp according to what chainfire wrote, unsigned images should boot if they are booted, not flashed. So u can try fastboot boot boot.img to verify this
Click to expand...
Click to collapse
That's freaking cool info. If nobody manages to "fastboot boot" test your latest ROM, i will do tomorrow when back home.
Nah.. waste of time.. signing is not required
darkobas said:
Nah.. waste of time.. signing is not required
Click to expand...
Click to collapse
So downloading and testing your latest build wont help at all? Let me know, if you got new info.
If it is not the signing, what is it if I may ask? Since both phones have the same SoC, it seems like they SHOULD boot.
mad-murdock said:
So downloading and testing your latest build wont help at all? Let me know, if you got new info.
If it is not the signing, what is it if I may ask? Since both phones have the same SoC, it seems like they SHOULD boot.
Click to expand...
Click to collapse
Did you try to boot the omni?
I have an look tonight if i can pull some logs.
Related
https://forums.oneplus.net/threads/rom-official-5-0-android-lollipop-alpha.223252/
ALPHA STAGE GUYS, EXPECT BUGS, MAKE A BACKUP IN RECOVERY BEFORE FLASHING!!
THIS ROM IS MADE BY ONEPLUS, NOT ME.
Here we go, official L for the oneplus one (made by oneplus) is here, there are a few bugs which can be found in the main link above.
Happy flashing!
And Happy new year!
All credit goes to oneplus. I'm just sharing the link!
It's not cyanogen mod though!It's an alpha build but no one at the OPO thread hasen't installed it yet!
Sent from USS Intrepid NCC-1631
---------- Post added at 07:22 PM ---------- Previous post was at 07:21 PM ----------
At least they are building their own rom!And happy new year guys!
Sent from USS Intrepid NCC-1631
I tried it but had an error about updater script. When i time i will try again
störte said:
I tried it but had an error about updater script. When i time i will try again
Click to expand...
Click to collapse
I haven't tested it yet, I'm not sure that I will. Cause of the bugs I am seeing on the OPO thread.
guys you need to unmount system before you flash otherwise the updater script will fail.
Great will retry
I'm using it right now. No real problems noticed so far except for a couple of crashes at first boot. It's really smooth. Pure AOSP.
Yes very pure.
Strange cant get into recovery anymore
Does anyone know if they're using the same sources as Cyanogen? (It had a weird name. CM started to suck when they started using it.)
Or is it PURE AOSP?
dugzino said:
Does anyone know if they're using the same sources as Cyanogen? (It had a weird name. CM started to suck when they started using it.)
Or is it PURE AOSP?
Click to expand...
Click to collapse
Pure CAF AOSP.
I can only recommend not to use it. My Recovery was deleted and i cant get into any Recovery anymore. I get only a chinese fastboot.. Tried to flash my Recovery via adb. On first boot it worked but then not anymore. So be very carefull
störte said:
I can only recommend not to use it. My Recovery was replaced and i cant get into any Recovery anymore. I get only a chinese fastboot.. Tried to flash my Recovery via adb. On firsat boot it worked but then not anymore. So be very carefull
Click to expand...
Click to collapse
Works perfect for me.
Thats strange. Anyway i flashed a recovery and deleted the system in order to restore a backup. It looks nice but the Recovery Problem must be solved in order for me to try again.
BUt i like the Wallpaper
störte said:
Thats strange. Anyway i flashed a recovery and deleted the system in order to restore a backup. It looks nice but the Recovery Problem must be solved in order for me to try again.
BUt i like the Wallpaper
Click to expand...
Click to collapse
I think you need to reflash recovery when you install it, which is easy to do from fastboot.
I did that. But even then i was not able to enter recovery
very very different modem, compared it against all the five I've got here (not all the previous modems) and can't see anything like it.
sha1 DD7A19EA09FF60485A6D8469F25C750A9AE627AE
md5 BA7C0A93BB63955408459ACA88BAAFFC
TeChNoC4AzY said:
I think you need to reflash recovery when you install it, which is easy to do from fastboot.
Click to expand...
Click to collapse
You would be correct. In fact, they specifically mention that in the instructions directly before Step 1.
This build does not have a built-in recovery
Click to expand...
Click to collapse
Well consider that it's build from their own source it's normal that it's asop-like but gonna give it a try tomorrow. Of course hope they will merge latest 5.0.3 that will come in these week and all other feature of cyanogenmod11S
confed said:
You would be correct. In fact, they specifically mention that in the instructions directly before Step 1.
Click to expand...
Click to collapse
rudi_j7 said:
guys you need to unmount system before you flash otherwise the updater script will fail.
Click to expand...
Click to collapse
How is that done?
Hello all,
...as i had the night clock Display Problem..i was searching to find a way to fix it...
...all you need is the firmware: G925FXXU1AOD4_G925FOJV1AOD4_KSA
i have repacked it to only flash system and boot from it...works on my no carreer G925F
..use odin to flash it:
https://www.androidfilehost.com/?fid=23991606952600627
md5.: 34105FB3070FB9BB78A057DDC424753E
..or simple the kernel (boot) from it...but it will give you a error in smart switch mobile ..if you want ignore the error than it works also)
http://sourceforge.net/projects/ale...y_S6_Edge/boot_fixed_night_clock.tar/download
...now have fun again
BTW..I'm not responsible for any problems
The kernel worked on my G925F variant. Flashed via flashify. Thanks OP!
So I need to keep the stock kernel?
Sent from my SM-G925F
skivnit said:
So I need to keep the stock kernel?
Sent from my SM-G925F
Click to expand...
Click to collapse
the kernel has the fix in it..
I have downloaded a backup from my firmware to be safe..
BTW..not tripping Knox with this method..
on a side note..the newest Vodafone firmware that was posted here..does not contain this fix.. lol
OK thanks for the info, already tripped my Knox but I don't want a stock kernel
Sent from my SM-G925F
Alex-V said:
Hello all,
...as i had the night clock Display Problem..i was searching to find a way to fix it...
...all you need is the firmware: G925FXXU1AOD4_G925FOJV1AOD4_KSA
i have repacked it to only flash system and boot from it...works on my no carreer G925F
..use odin to flash it:
https://www.androidfilehost.com/?fid=23991606952600627
md5.: 34105FB3070FB9BB78A057DDC424753E
..or simple the kernel (boot) from it...but it will give you a error in smart switch mobile ..if you want ignore the error than it works also)
http://sourceforge.net/projects/ale...y_S6_Edge/boot_fixed_night_clock.tar/download
...now have fun again
BTW..I'm not responsible for any problems
Click to expand...
Click to collapse
--- Please delete ---
skivnit said:
OK thanks for the info, already tripped my Knox but I don't want a stock kernel
Sent from my SM-G925F
Click to expand...
Click to collapse
..so it would be nice to know if Samsung pushed source for this kernel ?
Alex-V said:
..so it would be nice to know if Samsung pushed source for this kernel ?
Click to expand...
Click to collapse
Probably not that soon :crying: They never share the sources for their current kernel
mythos234 said:
Probably not that soon :crying: They never share the sources for their current kernel
Click to expand...
Click to collapse
mmmhh..the hope dies last ... :angel:
htc had around 90 days deadline
would be nice...as i think i want root again ..want make again a rom...for kernels i must flash ubuntu again...(had an update problem..since then its no more boot correct)..also want to try your kernel
Alex-V said:
mmmhh..the hope dies last ... :angel:
htc had around 90 days deadline
would be nice...as i think i want root again ..want make again a rom...for kernels i must flash ubuntu again...(had an update problem..since then its no more boot correct)..also want to try your kernel
Click to expand...
Click to collapse
Hahaha, thanks Ubuntu can be a giant pain too. Better wait for my new update :angel: And please make the rom, I'm excited already
Alex-V said:
Hello all,
...as i had the night clock Display Problem..i was searching to find a way to fix it...
...all you need is the firmware: G925FXXU1AOD4_G925FOJV1AOD4_KSA
i have repacked it to only flash system and boot from it...works on my no carreer G925F
..use odin to flash it:
https://www.androidfilehost.com/?fid=23991606952600627
md5.: 34105FB3070FB9BB78A057DDC424753E
..or simple the kernel (boot) from it...but it will give you a error in smart switch mobile ..if you want ignore the error than it works also)
http://sourceforge.net/projects/ale...y_S6_Edge/boot_fixed_night_clock.tar/download
...now have fun again
BTW..I'm not responsible for any problems
Click to expand...
Click to collapse
thanks
Do we really need a new thread? I can update the op of old o e to fixed if you want.
http://forum.xda-developers.com/showthread.php?t=3081048
brar.arsh said:
Do we really need a new thread? I can update the op of old o e to fixed if you want.
http://forum.xda-developers.com/showthread.php?t=3081048
Click to expand...
Click to collapse
sure you can do (with credits) ..I also posted the link of the thread in your thread..wasn't sure if you still on board with the problem..anyway now the thread is open ?
just want to confirm, file is 3.3gb?
beda_boy said:
just want to confirm, file is 3.3gb?
Click to expand...
Click to collapse
yeah..that's the one with system inside..you check if you correctly download with md5
this may be a long shot but will this fix work for verizon. im 99% sure it will not huh =/
dluxx06 said:
this may be a long shot but will this fix work for verizon. im 99% sure it will not huh =/
Click to expand...
Click to collapse
also don't think so..
I haven't used night clock overnight, how does it impact the battery? currently, with deep sleep, I lose 0% batt 7 hrs overnight
I really want to try flashing the kernel version but am a bit weary of the results. There might be some sensors especially pertaining to the camera and even overall performance that might get affected or may become erratic.
gyxter said:
I really want to try flashing the kernel version but am a bit weary of the results. There might be some sensors especially pertaining to the camera and even overall performance that might get affected or may become erratic.
Click to expand...
Click to collapse
that's why it's good if you download your actual firmware also (as backup) so you can go back if there are problems.. ?
edit: latest 14.1 base out with fixed camera and booting
edit: alpha6 is out, sensors fixed, but camera is completely broken
So I finally have a decent enough port of SFOS on bullhead
https://www.youtube.com/watch?v=OKWHeTUiU34
Thats an old video but a quick demo.
http://images.devaamo.fi/sfe/bullhead/
images can be retrieved from the above
Flash the latest stock image for your base and boot into it. for android 7 thats 7.1.2 (N2G48C, Aug 2017) and android 6 thats 6.0.1 (MTC20K)
Reboot to twrp
Format data
Reboot to twrp again
copy over the zips
flash cm or lineage from prefered base, but 14.1 is better.
Flash sfos zip
Working
Audio
Calls
Texts
Data
Wifi
Camera
Sensors
Not Working :~( :
Fingerprint scanner
Bluetooth
Click to expand...
Click to collapse
Issue with install apps from the app store or warehouse?
need to setup password in developer options
devel-su pkcon refresh
Click to expand...
Click to collapse
also since store is sometimes a bit meh, you can use
https://openrepos.net/content/basil/warehouse-sailfishos
best way to copy files onto device is through ssh, setup password in developer options
store is sometimes broken, you need to do devel-su pkcon refresh in terminal, need to set password up in developer options.
OTA - Over the Air update
Best way to update SailfishOS is by using an ssh connection to the phone.
Disable all patches and Openrepos repositories before updating.
Before updating use
Set desired release version, for example 2.2.0.29:
ssu release 2.2.0.29
Click to expand...
Click to collapse
Refresh the package cache:
devel-su pkcon refresh
Click to expand...
Click to collapse
Upgrade SailfishOS:
version --dup
Click to expand...
Click to collapse
Reboot the phone and enjoy the new release.
this wouldnt of been possible from the immense amount of help from the guys @freenode#sailfishos-porters
Really nice job! hope we can get all working in near future
Awesome cant wait to see stable build!
Sent from my Nexus 5X using Tapatalk
Can this be installed with multirom as secondary rom?
m4r0v3r said:
So I finally have a decent enough port of SFOS on bullhead
https://www.youtube.com/watch?v=OKWHeTUiU34
Thats an old video but a quick demo.
http://images.devaamo.fi/sfe/bullhead/
images can be retrieved from the above
Click to expand...
Click to collapse
Nice job, fingers crossed for getting other features to work!
btw. which vendor to use with it?
latest 6.0.1
fnldstntn said:
Can this be installed with multirom as secondary rom?
Click to expand...
Click to collapse
never tried it, didnt know we had a multirom stable.
on hammerhead it works fine as 2nd rom.
Holy crap this is awesome! I was waiting for a sailfish os port since I switched from my nexus 4. Is there a way for me (as an non-coder) to help you out somehow?
Oh and do you think it is possible that camera will work in the future or is this a missing driver code thing?
m4r0v3r said:
never tried it, didnt know we had a multirom stable.
on hammerhead it works fine as 2nd rom.
Click to expand...
Click to collapse
Yes there is a stable multurom on jolla kernel tread but in that case probably i will need to use the cm13 as primery rom to becouse of the vendor.
OMG a New Rom i don't know sailfish Os wow i go to try it
Thank you very much for your work
Really nice, sadly i need the camera for my work so i cant use as DD
Renaf2 said:
OMG a New Rom i don't know sailfish Os wow i go to try it
Thank you very much for your work
Click to expand...
Click to collapse
Not a rom, it is a completely different operating system so no android apps.
giantflash said:
Holy crap this is awesome! I was waiting for a sailfish os port since I switched from my nexus 4. Is there a way for me (as an non-coder) to help you out somehow?
Oh and do you think it is possible that camera will work in the future or is this a missing driver code thing?
Click to expand...
Click to collapse
the camera thing is a 32bit/64bit issue atm so i'll see were I get with it, am also messing around trying to get sfos working on a Huawei P9
No android apps at all, we have sfdroid, but its not working on cm13 as far as I know.
Very cool indeed, def hope this goes further. Remember it on N5 and was awesome
It's a nice ROM. But on my N5X the WiFi and Data isn't working.So sad.
justf0127 said:
It's a nice ROM. But on my N5X the WiFi and Data isn't working.So sad.
Click to expand...
Click to collapse
That was my fault, issue with PARANOID_ANDROID. New image thats been upped should fix the issue
Ah... So it seems that its source is based on cm13 built in 161222, then should I use December mm vendor or January mm vendor?
(Sorry for my bad English...)
Riskypedia said:
Ah... So it seems that its source is based on cm13 built in 161222, then should I use December mm vendor or January mm vendor?
(Sorry for my bad English...)
Click to expand...
Click to collapse
December probably.
And I know I'm bothering, but another question...
Is this rom doesn't contain boot animation? Cuz I saw cm13 booted well, but after flashing this over cm13 I can't see anything except google logo. Should I set my bootloader to the latest one?
6.0.1 (MTC20L) is what am using
I know there are a few kernels/boot.img to force native 4K all the time on AOSP based ROMs, but are there any for Stock or Stock based ROMS?
*Dang! Thought I was in the Q&A and just realized I posted this in the wrong section and can't delete or move it.
You might be able to remove the 1080p configuration in the copyleft archive just like in the aosp kernel to get a 4k stock kernel. I haven't looked at it so I don't know if it will work for sure, but its worth a try.
Edit: Looks like it might have worked.
Sepo190 said:
You might be able to remove the 1080p configuration in the copyleft archive just like in the aosp kernel to get a 4k stock kernel. I haven't looked at it so I don't know if it will work for sure, but its worth a try.
Edit: Looks like it might have worked.
Click to expand...
Click to collapse
Could You share the Image with us?:angel:
Miustone said:
Could You share the Image with us?:angel:
Click to expand...
Click to collapse
Yeah, sure. This is a .235 kernel that has been working surprisingly well for me. I used the ramdisk from shoey63's kernel repack here https://forum.xda-developers.com/xz-premium/development/kernel-repository-t3801795, so you need to flash that drmfix.zip too.
A couple of things I have run into though. The finish button wasn't showing up at the end of the setup wizard, so you have to go through that on the stock kernel and then flash this modified one. You might be able to fix it by changing the dpi, but I haven't tried that. You also cant set up any lock screen security until you flash the kernel or it will boot loop when flashed. So, the process that worked for me was:
1) flash stock .235
2) go through setup wizard NOT setting lock screen/fingerprint security
3) flash this kernel, drm fix and magisk
4) reboot
5) setup fingerprint/lockscreen security
You can change the screen dpi by using the wm density command or changing ro.sf.lcd_density in your build.prop.
https://mega.nz/#!o5FjxYwZ!zDS8DRaTnpER7e8YQOyyLjg_hY970geF9QaZajx5oO8
Does anyone know what changes the drmfix requires other than adding "export LD_PRELOAD drmfix.so:drm****.so" to the init.environ.rc in the ramdisk?
Sepo190 said:
A couple of things I have run into though. The finish button wasn't showing up at the end of the setup wizard, so you have to go through that on the stock kernel and then flash this modified one. You might be able to fix it by changing the dpi, but I haven't tried that. You also cant set up any lock screen security until you flash the kernel or it will boot loop when flashed. So, the process that worked for me was:
1) flash stock .235
2) go through setup wizard NOT setting lock screen/fingerprint security
3) flash this kernel, drm fix and magisk
4) reboot
5) setup fingerprint/lockscreen security
You can change the screen dpi by using the wm density command or changing ro.sf.lcd_density in your build.prop.
https://mega.nz/#!o5FjxYwZ!zDS8DRaTnpER7e8YQOyyLjg_hY970geF9QaZajx5oO8
Click to expand...
Click to collapse
If I'm currently on 235, basically all I need to do is flash your kernel + drmfix, right? Or is a fresh install really needed? Btw, do you pass safetynet on your kernel?
iArvee said:
If I'm currently on 235, basically all I need to do is flash your kernel + drmfix, right? Or is a fresh install really needed? Btw, do you pass safetynet on your kernel?
Click to expand...
Click to collapse
I'm pretty sure you're going to need to do a fresh install. You can try without, but I have a feeling you are going to bootloop. It doesn't pass safteynet, but I can probably add the patch in for you. I'll take a look at it later tonight or tomorrow. Now that .270 CE1 is out I was going to move to that, but I can do the .235 one too if you want.
Sepo190 said:
I'm pretty sure you're going to need to do a fresh install. You can try without, but I have a feeling you are going to bootloop. It doesn't pass safteynet, but I can probably add the patch in for you. I'll take a look at it later tonight or tomorrow. Now that .270 CE1 is out I was going to move to that, but I can do the .235 one too if you want.
Click to expand...
Click to collapse
If it's not too much trouble, can you do the .235? I'm most likely not going to be updating to 270 any time soon. Willing to try it out without a fresh install.
This is Awesome! Thanks!
However, drmfix.zip is error 404. Can you post it?
Were you thinking to do one of these for .270?
gaijin1% said:
This is Awesome! Thanks!
However, drmfix.zip is error 404. Can you post it?
Were you thinking to do one of these for .270?
Click to expand...
Click to collapse
https://mega.nz/#!JhtF0bCJ!G0zOmqZYoNeFwSvLQnh5GAMh3_E--XQWAYjzrm4buC0
Yeah. I'll do one for .270, but it might be a week or so. I just got really busy.
Sepo190 said:
https://mega.nz/#!JhtF0bCJ!G0zOmqZYoNeFwSvLQnh5GAMh3_E--XQWAYjzrm4buC0
Yeah. I'll do one for .270, but it might be a week or so. I just got really busy.
Click to expand...
Click to collapse
That sounds great! I'm having trouble with .235, so I'll wait for the .270. MUCH appreciated
Watching gravure will be so much more satisfy ing, thanks
gaijin1% said:
That sounds great! I'm having trouble with .235, so I'll wait for the .270. MUCH appreciated
Click to expand...
Click to collapse
What issue are you having with the .235 one? I can't seem to get the drm fix to work on the .270 kernel as of right now, but I'll look more soon.
Sepo190 said:
What issue are you having with the .235 one? I can't seem to get the drm fix to work on the .270 kernel as of right now, but I'll look more soon.
Click to expand...
Click to collapse
I actually got it set up with 235, but for some reason I can't get it to root. Magisk installs fine, but nothing can get root permission. What version of Magisk did you use?
gaijin1% said:
I actually got it set up with 235, but for some reason I can't get it to root. Magisk installs fine, but nothing can get root permission. What version of Magisk did you use?
Click to expand...
Click to collapse
I used 16.7 and it worked fine for me. Did you try going in the magisk app and granting permission there?
Sepo190 said:
Yeah, sure. This is a .235 kernel that has been working surprisingly well for me. I used the ramdisk from shoey63's kernel repack here https://forum.xda-developers.com/xz-premium/development/kernel-repository-t3801795, so you need to flash that drmfix.zip too.
A couple of things I have run into though. The finish button wasn't showing up at the end of the setup wizard, so you have to go through that on the stock kernel and then flash this modified one. You might be able to fix it by changing the dpi, but I haven't tried that. You also cant set up any lock screen security until you flash the kernel or it will boot loop when flashed. So, the process that worked for me was:
1) flash stock .235
2) go through setup wizard NOT setting lock screen/fingerprint security
3) flash this kernel, drm fix and magisk
4) reboot
5) setup fingerprint/lockscreen security
You can change the screen dpi by using the wm density command or changing ro.sf.lcd_density in your build.prop.
https://mega.nz/#!o5FjxYwZ!zDS8DRaTnpER7e8YQOyyLjg_hY970geF9QaZajx5oO8
Does anyone know what changes the drmfix requires other than adding "export LD_PRELOAD drmfix.so:drm****.so" to the init.environ.rc in the ramdisk?
Click to expand...
Click to collapse
So if this actual 4k?? Like native 4k?? How's battery life/performance??
Sepo190 said:
What issue are you having with the .235 one? I can't seem to get the drm fix to work on the .270 kernel as of right now, but I'll look more soon.
Click to expand...
Click to collapse
I tried several things but couldn't get 235 to root for the life of me.
Now I really want the new ROM [O][8141/8142][.270] M-ROM: Xposed, Daydream compatible so I hope that a .270 based 4K kernel will work with it. Really want that Daydream in 4K. I wonder if your .235 kernel will work with it or if your .270 version will get the drm fix using the Kernel Patch from JanJan.
Sepo190 said:
I used 16.7 and it worked fine for me. Did you try going in the magisk app and granting permission there?
Click to expand...
Click to collapse
Hi man, sorry to interrupt your business, but are there any updates? Could you share with us how exactly you implement the 4k in the kernel? Maybe we could use the manual you're following, and do the work by ourselves.
I'm really curious. More and people are joining in
saved-j said:
Hi man, sorry to interrupt your business, but are there any updates? Could you share with us how exactly you implement the 4k in the kernel? Maybe we could use the manual you're following, and do the work by ourselves.
I'm really curious. More and people are joining in
Click to expand...
Click to collapse
Sorry I haven't given an update in a while. I haven't been on here in a while. I had an unexpected move, so my server wasn't hooked up and then I didn't have internet for a while. Just got it hooked up today actually. I have one with the drm fix working for the newest update using the ramdisk from JanJan's kernel. I can take another look at .270 probably this weekend if you want. I don't have a manual or anything, I'm just removing the 1080p configs from the dts file. I don't remember the file path off the top of my head and I'm not home right now.
It's not possible to enable 4k just édit build prop?
Envoyé de mon G8141 en utilisant Tapatalk
16.20 kernel
Here is a 4k 16.20 kernel that has been working for me for the past week if anyone wants it. I used the ramdisk from JanJan's kernel. Flash it and then everything in his drm-patching zip. The file I have been editing is dsi-panel-maple.dtsi btw, since someone asked earlier.
https://mega.nz/#!R5UhhKjA!U2kp2Zl4gYGddiSIkpJMaOlVYuAcakb514CwHq3jEH4
First I'm not the original post, and my English is not very wll,so plz be nice? here is the original post link
https://m.weibo.cn/detail/4292884486628928
And here is download link, injoy it
https://mega.nz/#F!ZjJ3iSZR!23Niltn4uLsOK5uRB_AwtQ
This google camera I shared, it support pixel3 night sight. You guys should try it it's so awesome
https://mega.nz/#!FnwmwKbD!FjM8EOnBE1oPDpJWRQbzO8StR-H2VYHw8LXsGCQAg8c
Installation instructions
- Download All the files
- install treble twrp recovery
- Take a backup
- Wipe cache
- Wipe dalvik cache
- wipe system
- wipe data
- flash vendor&PT firmware
- flash treble system.img (download your prefer os,if you don't know what it is then Google it )
- Reboot
- Enjoy!
Thank you catman
But whit out installation instructions , which order , i don't think any one dares. Flashing these files, no matter how ichy we all are trying it, a number of things could easily brik our phone's in a way there's no returning from, so if you could share all you know , it might help , in somebody dare trying it
Edit:
thx
But what is the meaning by this treble, I now I should google it, but these things we can already do, I mean OEM is easy installing, maybe in a different way, but what is new. Easier with treble?
Oh got it
https://www.google.com/amp/s/www.androidauthority.com/project-treble-818225/amp/
Nice if you like stock, but I don't and would never install it, if any aosp is out or custom ROMs available for my device, stock sucks big time.
spoonymoon said:
Thank you catman
But whit out installation instructions , which order , i don't think any one dares. Flashing these files, no matter how ichy we all are trying it, a number of things could easily brik our phone's in a way there's no returning from, so if you could share all you know , it might help , in somebody dare trying it
Click to expand...
Click to collapse
Already post it, and somebody did tried to flash it and it works great , only one problem it did not support Android P
I tried them and it works
Problems i faced.
Home button didnt work
charge led didnt work
couple of other things...
I got aosp, rr, pixelexperience working.
miffymiffy said:
I tried them and it works
Problems i faced.
Home button didnt work
charge led didnt work
couple of other things...
I got aosp, rr, pixelexperience working.
Click to expand...
Click to collapse
Sometimes **** happened but it just started and the original poster says it will keep updating so don't worry about it, BTW did you flash the official or homemade(???)
spoonymoon said:
Thank you catman
But whit out installation instructions , which order , i don't think any one dares. Flashing these files, no matter how ichy we all are trying it, a number of things could easily brik our phone's in a way there's no returning from, so if you could share all you know , it might help , in somebody dare trying it
Edit:
thx
But what is the meaning by this treble, I now I should google it, but these things we can already do, I mean OEM is easy installing, maybe in a different way, but what is new. Easier with treble?
Oh got it
https://www.google.com/amp/s/www.androidauthority.com/project-treble-818225/amp/
Nice if you like stock, but I don't and would never install it, if any aosp is out or custom ROMs available for my device, stock sucks big time.
Click to expand...
Click to collapse
I think the meaning Is about experience, It always good thing to experience new things,and There is alot of customazi os you can choose , like rr los axe aicp............
cartman56 said:
Sometimes **** happened but it just started and the original poster says it will keep updating so don't worry about it, BTW did you flash the official or homemade(???)
Click to expand...
Click to collapse
I did both. Suns one from the weibo link you posted is the one that works.
miffymiffy said:
I did both. Suns one from the weibo link you posted is the one that works.
Click to expand...
Click to collapse
All of them the home button didn't work?
Thx guys
Roms compatible with treble are links in weibo link posted by op?
I might not have looked probably
spoonymoon said:
Thx guys
Roms compatible with treble are links in weibo link posted by op?
I might not have looked probably
Click to expand...
Click to collapse
My English not taht well so I'm not sure what you mean, if you ask about who is the creater, i can tell you that isn't me, i just sharing his works that is all ? and the weibo link is straight to op?
I mean where is links to ROMs?
Its all Chinese... And I'm a bit Rusty there :laugh:
spoonymoon said:
Thx guys
Roms compatible with treble are links in weibo link posted by op?
I might not have looked probably
Click to expand...
Click to collapse
The roms that are compatible are GSI 8.1 roms. Others don't work.
How I got it to work;
Flash twrp with treble support. Reboot to recovery.
Flash both vendor zips, reboot to recovery
Flash U11 treble zip, reboot to recovery
Flash Oreo GSI system image of your liking from https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Flash U11 selinux zip. Reboot.
It should boot.
Also, make sure you backup in twrp beforehand as if it's not what you want, you can just restore.
For pixelexperience, I had issues with gapps verification. It wouldn't let me get around it.
spoonymoon said:
I mean where is links to ROMs?
Its all Chinese... And I'm a bit Rusty there :laugh:
Click to expand...
Click to collapse
Search project treble inside XDA
miffymiffy said:
The roms that are compatible are GSI 8.1 roms. Others don't work.
How I got it to work;
Flash twrp with treble support. Reboot to recovery.
Flash both vendor zips, reboot to recovery
Flash U11 treble zip, reboot to recovery
Flash Oreo GSI system image of your liking from https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Flash U11 selinux zip. Reboot.
It should boot.
Also, make sure you backup in twrp beforehand as if it's not what you want, you can just restore.
For pixelexperience, I had issues with gapps verification. It wouldn't let me get around it.
Click to expand...
Click to collapse
Thx miffy
Do you mean backup in New twrp, or old, i assume old backups won't work anymore?
And is it right what treple checker says that our device i a device with only one partition, thus only flash a images , with gapps?
And treple check says no treble support, but that is because i didn't flash zips yet surely
And which roms would you recommend?
Are all gsi images compatible with our htc u 11 ?
I'm on rr and not stock, magisk installed, does this matter?
Sorry for all the q but better sure than sorry
Don't work on HTC U11 Dual (A07)
vladislav1611 said:
Don't work on HTC U11 Dual (A07)
Click to expand...
Click to collapse
Having What problems
cartman56 said:
Having What problems
Click to expand...
Click to collapse
After flash the GSI image phone stays on HTC logo. Next problem is that phone can't recognise the internal storage when you try to do something on TWRP. Of course, I flashed the selunix zip on the last step. Tested PixelExpirience and AOSP, Android 8.1, A-only
vladislav1611 said:
After flash the GSI image phone stays on HTC logo. Next problem is that phone can't recognise the internal storage when you try to do something on TWRP. Of course, I flashed the selunix zip on the last step. Tested PixelExpirience and AOSP, Android 8.1, A-only
Click to expand...
Click to collapse
Did you do Clean flash before you flash GSI? and after the flash GSI you should do a FACTORY RESET
cartman56 said:
Did you do Clean flash before you flash GSI? and after the flash GSI you should do a FACTORY RESET
Click to expand...
Click to collapse
The first one i did but the second one no. Thanks. I'll try tomorrow again.