Firmware for s928 smart watch - Other SmartWatches

Hi,
This is my first post on this forum. I wish to ask about firmware for S928 (Makibes G01).
I update firmware by wrong app and now watch only vibrate and screen lighting.
But still I can connect watch by bluetooth, so I can push update by nrf toolbox.
Thanks for help.

Same problem
PetrykPL said:
Hi,
This is my first post on this forum. I wish to ask about firmware for S928 (Makibes G01).
I update firmware by wrong app and now watch only vibrate and screen lighting.
But still I can connect watch by bluetooth, so I can push update by nrf toolbox.
Thanks for help.
Click to expand...
Click to collapse
Hello, i make same mistake and symptoms are same. I’m glad that I’m not only one in this situation and hope that we found solution for that problem.

Hello
I wrote e-mail to Makibes Team and they send me firmware doe G01/G02 watch (it's the same than S928).
You can download it here: http://www.mediafire.com/file/smka4y56t7acc5a/G01_G02.ZIP

Cool, now we need a method to update our clocks. Thanks for sharing firmware.

s2k1 said:
Cool, now we need a method to update our clocks. Thanks for sharing firmware.
Click to expand...
Click to collapse
Yes! My watch works again. I followed procedures in zip file and voila watch works! I’m so happy :laugh: Thanks Walek75

cześć
Do you have a watch like that? because I do not know if I have s958 or G05.
Does this firmware do anything good in the operation of the watch?
thx

walek75 said:
Hello
I wrote e-mail to Makibes Team and they send me firmware doe G01/G02 watch (it's the same than S928).
You can download it here: http://www.mediafire.com/file/smka4y56t7acc5a/G01_G02.ZIP
Click to expand...
Click to collapse
Have you got any problems with s958?
---------- Post added at 04:56 PM ---------- Previous post was at 04:56 PM ----------
PetrykPL said:
Hi,
This is my first post on this forum. I wish to ask about firmware for S928 (Makibes G01).
I update firmware by wrong app and now watch only vibrate and screen lighting.
But still I can connect watch by bluetooth, so I can push update by nrf toolbox.
Thanks for help.
Click to expand...
Click to collapse
Have you got any problems with s958?

Anyone can help me? I update my S928 and now pedometer is not working.. Kx023 error shown anytime i reset the watch

s928
hola buenas tardes yo tengo este y hay un mismo modelo pero con diferentes nombres por lo que se ve
lo que no se si los firmwares son los mismos,
SILVER s928 sport v1.52.9 sn:a6c41f, este es el mio

Diggro G01
Can I use this software for my dead smartwatch?

walek75 said:
Hello
I wrote e-mail to Makibes Team and they send me firmware doe G01/G02 watch (it's the same than S928).
You can download it here: http://www.mediafire.com/file/smka4y56t7acc5a/G01_G02.ZIP
Click to expand...
Click to collapse
Hi,
Can you post or pm me the contact address for Makibes please, I need firmware update for my BR1 watch.
Thanks

Makibes G07 problem
Hi,
Can you post or pm me the contact address for Makibes please, I need firmware update for my G07 watch.
Thanks

romystevenj said:
Anyone can help me? I update my S928 and now pedometer is not working.. Kx023 error shown anytime i reset the watch
Click to expand...
Click to collapse
mee too. I have the same problem.

Related

C-Watch watch faces

Hello everyone!
I've got this Condor smartwatch (ACR603) which is manufactured in China with the following specifications:
Display: Screen 1,4" AMOLED Resolution: 400 x 400 px
CPU: 1,2 GHz MTK6571
RAM / ROM: 512 Mo / 4 Go
OS: Android 4.4 Kitkat
Connectivity: Bluetooth 4.0
Sensors: Gravity, Compass, Heart rate
Battery: Polymer 3.7v, 450 mAh
Multitouch: Capacitive 2 Points
Charger: 5V === 0,25A
Dimensions: 57,5*23,5*14,7 mm
Fonctions: Contacts, Messages, Music, Compass, Pedometer, C-Heart, Coach
PLEASE: is there any solution to install custom watch skins on this piece?? cuz I tried all the ways provided here & no one seems to be working!!
You sure it's a 6571 and not a dual core 6572?
Sent from my HTC 2PS6200 using Tapatalk
---------- Post added at 12:26 AM ---------- Previous post was at 12:23 AM ----------
Can't find it on the web anywhere...
Sent from my HTC 2PS6200 using Tapatalk
---------- Post added at 12:31 AM ---------- Previous post was at 12:26 AM ----------
I found it. You're right. It's a 6571. No cellular included.
I'm sorry but I have absolutely no idea how you could do this.
Without having the watch it's like shooting in the dark
Sent from my HTC 2PS6200 using Tapatalk
pablo11 said:
I found it. You're right. It's a 6571. No cellular included.
I'm sorry but I have absolutely no idea how you could do this.
Without having the watch it's like shooting in the dark
Sent from my HTC 2PS6200 using Tapatalk
Click to expand...
Click to collapse
Thanks Bro
Please guys! Any clue??
Is there any other device with the same specifications as mine??
Hi guys!
Is there any other applications like "Cronosurf" which provides a watchface for standalone android watches in a sort of an apk??
C watch
Bonjour... Est ce que vous pouvez me dir la marque chinoise de la c watch de condor. Merci. Moi je cherche a la metre a jour ou instaler google service mais rien a fair. Par contre je l'ai rooter et instaler qq app. C une belle montre mais limiter question cusomisation domage.
its seems to be a kw88 clone
try to find the method for kingwear k88 (a launcher that you should install before )
madog4 said:
Bonjour... Est ce que vous pouvez me dir la marque chinoise de la c watch de condor. Merci. Moi je cherche a la metre a jour ou instaler google service mais rien a fair. Par contre je l'ai rooter et instaler qq app. C une belle montre mais limiter question cusomisation domage.
Click to expand...
Click to collapse
Hi all,
Madog how you root the watch ??
Root
Hi... It's very easy. I just used king root. I installed the apk and excuted it.
madog4 said:
Hi... It's very easy. I just used king root. I installed the apk and excuted it.
Click to expand...
Click to collapse
Aussi simple que ça... Merci bien :good:
Hi...this watch is a huawei watch running EMUI V1.1.7
but imposible to find an updare or anything about yhis version of EMUI V1.1.7
---------- Post added at 02:27 AM ---------- Previous post was at 02:14 AM ----------
hi bro ...i think C WATCH is manifacturing by Huawei ....you know when i blug my c watch in my pc an excute hisuit who is used for my huawei phone it detected my watch ...try it bro
Any solution found ?
Hi all,
I have an ACR603 C-WATCH by condor and the problems with this one is that:
1) contacts after syncronzation still empty
2) can not install google play service and connect with google acount
3) no way for costume wallpaper
4) can i use it with an other apk then C-WATCH connect
Any solution please ?
Thanks
I also have a C-watch and am having problems. I did solve the getting contacts sync by addig BTNotigication to the phone from play store. My problems are:
Can't get Chicago weather.
Can't get digital watch faces in 12 hour format.
Can't get Play Store apps to down load on watch. App indicates it is installed but no app in download file.
How to set up music
If you have solved any of these let me know.
Why doesn't Condor have a detailed manual or user web site with answered questions?
mromig said:
I also have a C-watch and am having problems. I did solve the getting contacts sync by addig BTNotigication to the phone from play store. My problems are:
Can't get Chicago weather.
Can't get digital watch faces in 12 hour format.
Can't get Play Store apps to down load on watch. App indicates it is installed but no app in download file.
How to set up music
If you have solved any of these let me know.
Why doesn't Condor have a detailed manual or user web site with answered questions?
Click to expand...
Click to collapse
i've solved many problems on my C-Watch after a hard reset... i suggest u to do the same
hi
so did you get eny chance with c-watch ??
I installed google play in my c watch and it works but i can't add any watch face i want if there is a solution tell me plz
One thing I can suggest is WatchMaker's live walpapers. I dunno if your Android watch has a 'homescreen' though.
Chames eddinne el fehri said:
I installed google play in my c watch and it works but i can't add any watch face i want if there is a solution tell me plz
Click to expand...
Click to collapse
Can you please tell me how did you do it? and what version did you install

HONOR 5C nem-l51 new update released 2016.12.26

Hi
I am Osama from Syria
am going to tell you that new full update released to our device nem-l51
update is nem-l51c432b130 EMUI 4.1.2
**Dear User, This update will improve your device's performance and stability to bring you a better user experience. You are recommended to install it. [Update tips] 1. Make sure your phone has not been rooted before updating. If you experience any issues during the update, please visit the Huawei Support website or contact your local service center for assistance. 2. This update will not erase your personal data.**
to download it
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1165/g104/v71812/f1/full/update.zip full
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1165/g104/v71842/f1/full/update.zip OTA
Installation:
1) unpack update.zip
2) put it in external sd card
3) In call menu press *#*#2846579#*# * then select Software Upgrade —> SDCard Upgrade
*phone must be good charged
more updates at
http://hwmt.ru/oth/HWFF/info/view.php
sorry links updated
Doesn't work. It says
This page does not exist for temporarily page error 404
When you click on the dload option
---------- Post added at 03:17 AM ---------- Previous post was at 03:14 AM ----------
And same again for the OTA option
Error 404 return to previous page or something.
Try this instead...
new verison for NEM-L51C432Bxxx released 2016/12/26:
130
New Release works fine. No Problems to Install.
Sent from my NEM-L51 using XDA Free mobile app
Sanno said:
Hi
I am Osama from Syria
am going to tell you that new full update released to our device nem-l51
update is nem-l51c432b130 EMUI 4.1.2
**Dear User, This update will improve your device's performance and stability to bring you a better user experience. You are recommended to install it. [Update tips] 1. Make sure your phone has not been rooted before updating. If you experience any issues during the update, please visit the Huawei Support website or contact your local service center for assistance. 2. This update will not erase your personal data.**
to download it
http://update.hicloud.com:8180/TDS/d...ull/update.zip full
http://update.hicloud.com:8180/TDS/d...ull/update.zip OTA
Installation:
1) unpack update.zip
2) put it in external sd card
3) In call menu press *#*#2846579#*# * then select Software Upgrade —> SDCard Upgrade
*phone must be good charged
more updates at
http://hwmt.ru/oth/HWFF/info/view.php
Click to expand...
Click to collapse
Slm 'hri. Is it just an update for middle east or European devices too. Thanks advance. :laugh:
nabi3003l said:
Slm 'hri. Is it just an update for middle east or European devices too. Thanks advance. :laugh:
Click to expand...
Click to collapse
I don't know about the differences between middle east and europe version, but it's running on my europe version fine for around two days now.
I posted the link in the respective thread trying to wake Druger into adding it to his list, but nothing yet.
Sanno said:
Hi
I am Osama from Syria
am going to tell you that new full update released to our device nem-l51
update is nem-l51c432b130 EMUI 4.1.2
**Dear User, This update will improve your device's performance and stability to bring you a better user experience. You are recommended to install it. [Update tips] 1. Make sure your phone has not been rooted before updating. If you experience any issues during the update, please visit the Huawei Support website or contact your local service center for assistance. 2. This update will not erase your personal data.**
to download it
http://update.hicloud.com:8180/TDS/d...ull/update.zip full
http://update.hicloud.com:8180/TDS/d...ull/update.zip OTA
Installation:
1) unpack update.zip
2) put it in external sd card
3) In call menu press *#*#2846579#*# * then select Software Upgrade —> SDCard Upgrade
*phone must be good charged
more updates at
http://hwmt.ru/oth/HWFF/info/view.php
Click to expand...
Click to collapse
Why you created a separate subject?
If there is already a subject
DRUGER said:
Why you created a separate subject?
If there is already a subject
Click to expand...
Click to collapse
Thanks Osama, it's working nickel for me in Paris !
How long it takes to start the phone after update? Mine is on Honor sign like 5 minutes now and I am starting to be anxious...
thanks, update worked great on non-rooted L51. User data retained and 'update.app' placed in a folder called 'dload' on external micrSD.
Whole process took about 15mts.
gent.be said:
Thanks Osama, it's working nickel for me in Paris !
Click to expand...
Click to collapse
HI gent.be. You say you're in Paris. I don't know what's wrong about my flash for this update, but it's been stopped on 5%, tried twice. Could you tell me which built you had before 'C432b102' for me.
Thanks advance. Have a nice weekend.
nabi3003l said:
HI gent.be. You say you're in Paris. I don't know what's wrong about my flash for this update, but it's been stopped on 5%, tried twice. Could you tell me which built you had before 'C432b102' for me.
Thanks advance. Have a nice weekend.
Click to expand...
Click to collapse
Hello Nabi. You can found on xda the b120. Download it & follow what Osama said. After do the same thing with b130. Sorry for my English...
gent.be said:
Hello Nabi. You can found on xda the b120. Download it & follow what Osama said. After do the same thing with b130. Sorry for my English...
Click to expand...
Click to collapse
Hello gent.be. Thank you for your advice. I'll try, but I haven't succeeded with B120 as far as I reminded. Tell me just one thing about you device . Does it get button fingerprint back yours? I mean you bought it in Europe?. Bye :good:
nabi3003l said:
Hello gent.be. Thank you for your advice. I'll try, but I haven't succeeded with B120 as far as I reminded. Tell me just one thing about you device . Does it get button fingerprint back yours? I mean you bought it in Europe?. Bye :good:
Click to expand...
Click to collapse
Tu parles Français visiblement. J'ai la version EU de 5c si telle est ta question. As-tu vu qu'il y a un autre poste qui concerne toutes les versions du 5c ?
---------- Post added at 07:45 PM ---------- Previous post was at 07:42 PM ----------
gent.be said:
Tu parles Français visiblement. J'ai la version EU de 5c si telle est ta question. As-tu vu qu'il y a un autre poste qui concerne toutes les versions du 5c ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/hon...-getting-upgrade-emui-4-1-1-to-t3521323/page7
gent.be said:
Tu parles Français visiblement. J'ai la version EU de 5c si telle est ta question. As-tu vu qu'il y a un autre poste qui concerne toutes les versions du 5c ?
---------- Post added at 07:45 PM ---------- Previous post was at 07:42 PM ----------
http://forum.xda-developers.com/hon...-getting-upgrade-emui-4-1-1-to-t3521323/page7
Click to expand...
Click to collapse
HI gent.be. Yes, I'm French but I still carry on speak in English to be kind with the forum, sorry!. So thank you for the link. I glance at it, but it's mostly talking about Asia versions. That's strange to not be able to upload!. I watched others forums in French but nothing except Emui upload 4.1.1. See you later. Bye
iantechie1979 said:
Doesn't work. It says
This page does not exist for temporarily page error 404
When you click on the dload option
---------- Post added at 03:17 AM ---------- Previous post was at 03:14 AM ----------
And same again for the OTA option
Error 404 return to previous page or something.
Click to expand...
Click to collapse
sorry links updated
iantechie1979 said:
Try this instead...
new verison for NEM-L51C432Bxxx released 2016/12/26:
130
Click to expand...
Click to collapse
thanks for your help
nabi3003l said:
Slm 'hri. Is it just an update for middle east or European devices too. Thanks advance. :laugh:
Click to expand...
Click to collapse
HI
this is Europaen devices only NEM-L51
gschutz said:
I don't know about the differences between middle east and europe version, but it's running on my europe version fine for around two days now.
I posted the link in the respective thread trying to wake Druger into adding it to his list, but nothing yet.
Click to expand...
Click to collapse
HI
this is Europaen devices only NEM-L51
the difference is with finger print but i use now nem-l51
gent.be said:
Thanks Osama, it's working nickel for me in Paris !
Click to expand...
Click to collapse
welcome:laugh:

Call problem

Hi i have a problem on my A2017G. Randomly, when i make a call people can't hear me on the other side but i hear them just fine. I live in Portugal and my carrier is Vodafone. The phone was bought on gearbest and is running V1.2.0B09 (updated with zip) Thanks in advance
For quick fix, quickly turn loud speaker on & off again. That should help.
joaocandeias said:
Hi i have a problem on my A2017G. Randomly, when i make a call people can't hear me on the other side but i hear them just fine. I live in Portugal and my carrier is Vodafone. The phone was bought on gearbest and is running V1.2.0B09 (updated with zip) Thanks in advance
Click to expand...
Click to collapse
I have the same phone as you and very often this problem arises, only when not using loudspeakers. If the call was made with loudspeaker mode, it seem to be fine.
nsabir said:
For quick fix, quickly turn loud speaker on & off again. That should help.
Click to expand...
Click to collapse
Thanks, i will try that
joaocandeias said:
Hi i have a problem on my A2017G. Randomly, when i make a call people can't hear me on the other side but i hear them just fine. I live in Portugal and my carrier is Vodafone. The phone was bought on gearbest and is running V1.2.0B09 (updated with zip) Thanks in advance
Click to expand...
Click to collapse
Hi, I also live in Portugal, and I'm also Vodafone with a2017G variant.
I use RR 8.1 rom, and I solved that issue by flashing B32 modem and B32 universal bootloader using latest TWRP by @NFound.
Search for both and let TWRP do its work.
Always nice to see a fellow portuguese around here. Cheers! :highfive::good:
Zootopia said:
Hi, I also live in Portugal, and I'm also Vodafone with a2017G variant.
I use RR 8.1 rom, and I solved that issue by flashing B32 modem and B32 universal bootloader using latest TWRP by @NFound.
Search for both and let TWRP do its work.
Always nice to see a fellow portuguese around here. Cheers! :highfive::good:
Click to expand...
Click to collapse
Obrigado pela resposta! Não tenho tido mais este problema, mas caso volte a acontecer frequentemente farei isso Já agora essa rom é estavel? Abraço.
joaocandeias said:
Obrigado pela resposta! Não tenho tido mais este problema, mas caso volte a acontecer frequentemente farei isso Já agora essa rom é estavel? Abraço.
Click to expand...
Click to collapse
Write in english and in portuguese if you want, but not only the latter. Pretty strict rules about it ?
If you like features and a very customizable environment to work with, and don't mind having an average battery friendly rom, RR is the way to go.
It is rock stable from my end, no issues at all, and very far from beta, although 8.1 Oreo goodness.
Qualquer dúvida, não hesites, abraço ??
Zootopia said:
Write in english and in portuguese if you want, but not only the latter. Pretty strict rules about it ?
If you like features and a very customizable environment to work with, and don't mind having an average battery friendly rom, RR is the way to go.
It is rock stable from my end, no issues at all, and very far from beta, although 8.1 Oreo goodness.
Qualquer dúvida, não hesites, abraço ??
Click to expand...
Click to collapse
Pois, por acaso tinha me lembrado disso das regras mas nem quis saber
That rom seems nice.... I really need to try it someday I love ROM's like that, customizable and with pure android look.
Right now i'm just waiting for stock oreo. I hope it rocks!
Abraço
nsabir said:
For quick fix, quickly turn loud speaker on & off again. That should help.
Click to expand...
Click to collapse
This method is for custom roms. He is using stock rom.
WesTD said:
This method is for custom roms. He is using stock rom.
Click to expand...
Click to collapse
I know. I'm using stock. I too face this problem from time to time. Usually, quickly toggling the loudspeaker on & off fixes it while in call if the other person does not hear me.
Hello! @joaocandeias,
Have you fixed your problem on your phone? Can you send your email to me? I have ZTE engineers friends, and they would like to help you fix this issue. If OK, please send email to Guo. [email protected] or [email protected].
Thank you!!
William Guo said:
Hello! @joaocandeias,
Have you fixed your problem on your phone? Can you send your email to me? I have ZTE engineers friends, and they would like to help you fix this issue. If OK, please send email to Guo. [email protected] or [email protected].
Thank you!!
Click to expand...
Click to collapse
I disabled the "ok google" recognition and it seems that the problem is solved. Thank you anyways
@joaocandeias, ,
I am very glad to hear that you fixed your problem. If have any question, you are most welcome than I can say, and I would feel appreciated to hear your suggestions on AXON 7 or AXON 9.
Thanks for your support!
---------- Post added at 11:43 PM ---------- Previous post was at 11:43 PM ----------
[/COLOR @joaocandeias, ,
I am very glad to hear that you fixed your problem. If have any question, you are most welcome than I can say, and I would feel appreciated to hear your suggestions on AXON 7 or AXON 9.
Thanks for your support!
I am on stock as well. If disabling the google assistant and/or toggling the loudspeaker works then that just saved me from buying a new phone for a while!
Thank you guys <3

Mekede AC8227L head unit

Heloo, i need help to download For_launchers.zip form post #12 here {Mod edit}
If some one can reupload please do it. Thank you.
Thank you. I just solved, created account.
custom launcher
Hi guys,
I bought a Mekede head unit and i'm having trouble customising my home screen, as the default one is locked and the custom launchers will not detect the native apps (radio, music, etc.)
Has anyone figured a way around this?
Thank you!
Best regards,
Lucian
Use this, all working now.
Thanks a lot, it worked perfectly.
Glad to help.
Hello. Have you for CD DVD player apk?
Tks
criszz said:
Use this, all working now.
Click to expand...
Click to collapse
How can I use this file? Ihave the same problem but Idont know how to solve it.
Thanks
srlandeira said:
How can I use this file? Ihave the same problem but Idont know how to solve it.
Thanks
Click to expand...
Click to collapse
Just download the apk from the link to a USB stick and then install them on the head unit using a file manager app from custom launcher.
Shorcuts to native apps will be created in the custom launcher.
Good luck!
LuciPanuci said:
Just download the apk from the link to a USB stick and then install them on the head unit using a file manager app from custom launcher.
Shorcuts to native apps will be created in the custom launcher.
Good luck!
Click to expand...
Click to collapse
Thanks a lot! I will try now
For_Launchers.zip
Hi
This worked very well. but missing the car info shortcut and if also you could reach a solution to use the steering wheels bottoms with any media player not only the native one,
thanks a lot
criszz said:
Use this, all working now.
Click to expand...
Click to collapse
---------- Post added at 11:24 PM ---------- Previous post was at 11:22 PM ----------
Hi
This worked very well. but missing the car info shortcut and if also you could reach a solution to use the steering wheels bottoms with any media player not only the native one,
Thanks a lot
criszz said:
Use this, all working now.
Click to expand...
Click to collapse
Hi Guys
Will this work on any 8227L CPU? Mine has the following details;
Model 8227L
Android 8.1.0
Kernel 3.18.79 (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05))
[email protected] #23
Tue Nov 20 09:22:37 CST 2018
Build: alps-mp-01.mp5
Custom build: alps-mp-o1.mp5
HMI: TSKJ.O.V03.2018.11.29.13.59
MCU: TSILL.180327
MEDIA: HC_v1.0.0_180926_1030
BTV: BT.18.11.21.1600
criszz said:
Use this, all working now.
Click to expand...
Click to collapse
Hi guys,
the download link does not work anymore. Can anyone re-upload the file, please?
Many thanks!
gogO
For_Launchers.zip
Hi,
I am also looking for these apps for my unit, but the download link doesn't work, does anyone still have another copy of the APK's linked in the first post?
Edit:
Found them on the first page after being logged in
Thanks for the link. I've learned. So much from this forum. I am still not yet even at a beginners stage but getting there. But, I just downloaded the file to a USB drive and download a file app and I should be good? Thanks again!
criszz said:
Use this, all working now.
Click to expand...
Click to collapse
isnt there anybody have that kind of launcher/ui have please share thanks
Tell me exactly what you want. Maybe i can help
I downloaded and tried out each of the Launchers provided here and really like UI5. 1 through 4 install properly but UI5 installs but vanishes every time I restart or reboot. I've tried every setting I can think of to make it work but still the same issue. I believe there is an issue with the apk install. Anyone have a fix for this or a properly working UI5.apk installer???
criszz said:
Use this, all working now.
Click to expand...
Click to collapse
What does this do exactly?
criszz said:
Use isso, tudo funcionando agora.
Click to expand...
Click to collapse
Mod edit - translated by https://www.deepl.com/translator:
Hello I bought a mekede mutimidia ts3 7862 and the screen of the reverse camera does not appear the entire screen is a warning at the bottom would like to know how to remove this warning and leave on full screen
*************************
Olá comprei uma mutimidia mekede ts3 7862 e na tela da câmera de ré não aparece a tela inteira fica um aviso na parte de baixo gostaria de saber como retirar este aviso e deixar em tela inteira

Need Microwear L5 firmware

I need latest microwear l5 firmware.. I tried contacting microwear through [email protected].. But they don't reply, it has been more than aa month.. No update coming through Fundo Pro app.. Please someone give me the firmware if you can.
Thank you
Issue l5 update
Sadman007 said:
I need latest microwear l5 firmware.. I tried contacting microwear through [email protected].. But they don't reply, it has been more than aa month.. No update coming through Fundo Pro app.. Please someone give me the firmware if you can.
Thank you
Click to expand...
Click to collapse
I have the same problem my watch is stuck in 0.0.4 version
floplop said:
I have the same problem my watch is stuck in 0.0.4 version
Click to expand...
Click to collapse
if I have the firmware file than I could have installed the firmware manually with nrf connect app
floplop said:
I have the same problem my watch is stuck in 0.0.4 version
Click to expand...
Click to collapse
contact me I managed to manually upgrade
did you have the firmware?
andimachrif said:
did you have the firmware?
Click to expand...
Click to collapse
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Hello,
My watch stands in dfu mode after upgrading a firmware that not worked.
Can someone send me a firmware a the way to flash it manually ?
Thanks
Envoyé de mon Pixel 3 XL en utilisant Tapatalk
Sadman007 said:
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Click to expand...
Click to collapse
Can I ask you to submit a firmware file? When updating by Fundo application the smartwatch died.
Could you tell us where to get the firmware file?
---------- Post added at 07:03 PM ---------- Previous post was at 07:00 PM ----------
I think that when we ask for help, it is so that they can provide us with a solution, and not to indicate that they have solved it and not to share the file or the solution, it is not ethical; not in this thread but in everyone. Thank you
Solución al error de actualización del firmware del MicroWear L5
Si te dio error al actualizar el firmware desde el fundo, instala nrf connect ejecuta y busca el dispositivo dfutarg, pulsa en Connect y luego la opción dfu, software packet Zip, busca en tu móvil en la memoria interna la carpeta fundo\frw y verás un archivo fundo.zip y enviar, a esperar y suerte.
jeyviman said:
Si te dio error al actualizar el firmware desde el fundo, instala nrf connect ejecuta y busca el dispositivo dfutarg, pulsa en Connect y luego la opción dfu, software packet Zip, busca en tu móvil en la memoria interna la carpeta fundo\frw y verás un archivo fundo.zip y enviar, a esperar y suerte.
Click to expand...
Click to collapse
Thank you very much.
Worked fine for me.
Sadman007 said:
contact me I managed to manually upgrade
Click to expand...
Click to collapse
Pm sent
Hi, Could soumebody say me where can i found : fundo\frw fundo.zip ?
Hello, I also have a Microwear L5 but with version 0.0.6.
Is there a newer one? if yes can someone help me please?
Thank u in advance.
Newer version
etimarques said:
Hello, I also have a Microwear L5 but with version 0.0.6.
Is there a newer one? if yes can someone help me please?
Thank u in advance.
Click to expand...
Click to collapse
Hi etimarques,
The latest firmware is v0.1.2 now. If you install the newest FunDo Pro app from Google Play, you can look for the newest firmware from this app and install it. It stores in the Fundo.zip file, what is mentioned above.
I don't know, whether in your case the titles in the smart watch for every page appear in English or Chinese. I had v0.0.6 firmware when I've bought it, and that time the titles appeared in English. After upgrading the firmware, they became Chinese. Update only if this is fine for you.
P.S.: If you have the v0.0.6 firmware, and the titles are English, could you upload your firmware? I would prefer those titles in English.
Hello..
Is it possible to have the firmware..
I am facing the same problem..
Thanks in advance..
Hello jest w stanie pomóc mi, mój l5 po aktualizacji umarł. Proszę o podanie jego po kolei mam wgrać oprogramowanie.
Sadman007 said:
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Click to expand...
Click to collapse
can u please send me this file with firmware?
Old firmware
Hi all,
Not sure if i'm too late on this.
When I first got my L5 9-12months ago or so, it came with 0.0.6 and I got about 6weeks of use for the first three charges.
I updated to 0.1.2 (later to 0.1.3) but I can still consistently only get about a week from a charge now.
I highly doubt this is battery related, as it came exactly as I updated -and after a few months of use prior.
Can anyone PM me the original firmware 0.0.6 if they still have it, or a link to where I can find it pls?
I'm seeing a lot of "i have it", so I'm hoping someone still does.
I'd just like to rule the firmware out of the equation.
Thanks all.

Categories

Resources