Database Users

[Q] Read the Sticky, still can't flash stock or lollipop kernels

I wonder whether there is help for someone who thought he knew how to flash a kernel but apparently is deluded. I have the original nexus seven Wi-Fi tablet android version 4.3 build number JWR66V. The system still wants to update me to 4.3 because I ripped some files out of the cache directory to prevent OTA updates. I have both fastboot and adb. I have read the stickies about flashing.
The phone is rooted and the bootloader is unlocked. I use TWRP custom recovery, and it's a good thing, because I solidly bricked myself up just trying to get my lollipop. I know there are tools to root a nexus seven even with stock lollipop, so I thought I'd upgrade my phone to stock lollipop and then use one of those methods. I tried both the stock lollipop kernel and the one provided by chain fire, which I understand is rooted already. (I'm assuming upgrading to lollipop will lose me my root, unless I want to recover back to 4.3.)
I tried to do these things a couple of different ways. When I tried fast boot, I got the message "error: neither -p product specified nor ANDROID_PRODUCT_OUT set". There was a YouTube video suggesting how to deal with this error message. I'm pretty sure I followed the instructions but no go. (I was using the "flash all" command.) This was after I had put the file containing lollipop in the directory, both zipped and unzipped (so that I had an .img file instead of a zip file). I tried using both the zip file with all of the lollipop partitions and the system image file individually. No go. I also had a message that android-info.txt could not be found, even though it was in the same, working directory.
I could be wrong but I don't think you can install a complete updated kernel from a file on the device. I think that works only with update.zip.
I'm still thinking fastboot is my best bet, but there are dependencies apparently and I don't know what files to include in its directory. Then, am I wise to go to stock and then root, or should I simply flash the stock kernel already rooted? I assume that's what chainfire is providing, correct?
I notice the lollipop official ROM nor Chainfire’s supposedly-rooted image have any file named nakasi. I have only .img files, no .zip files.
I found a dozen sets of instructions on how to flash a kernel but something I need is missing from all of them. Does anyone know what it is or can anyone offer some helpful advice?
Thank you,
Leon M.

Can I Ota update while rooted on stock firmware

I am currently on stock rom but rooted. An Ota update popped up can I update without bootloop

I would like to know the same thing

Naruto101 said:
I am currently on stock rom but rooted. An Ota update popped up can I update without bootloop
Click to expand...
Click to collapse
stkman32 said:
I would like to know the same thing
Click to expand...
Click to collapse
No you can't take an OTA if you have any modifications to /system (root). Have a look at my guide:
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928

I got an 8MB update for the november patch. Being on TWRP and root i need to convert back to stock before i can have it leave me alone? Is there a way to flash the patch without doing that?

Thanks for answering my question

roughriduz said:
I got an 8MB update for the november patch. Being on TWRP and root i need to convert back to stock before i can have it leave me alone? Is there a way to flash the patch without doing that?
Click to expand...
Click to collapse
No way around it, any modifications will cause the update to fail.

Heisenberg said:
No way around it, any modifications will cause the update to fail.
Click to expand...
Click to collapse
@amoeller had me flash the modified boot.img for MDB08M then flash the MDB08M system.img and vendor.img from the factory image. I rebooted bootloader, the booted to TWRP and re-flashed supersu. I am now on the November patch without having to remove TWRP and all works well. My user data was also untouched.

roughriduz said:
@amoeller had me flash the modified boot.img for MDB08M then flash the MDB08M system.img and vendor.img from the factory image. I rebooted bootloader, the booted to TWRP and re-flashed supersu. I am now on the November patch without having to remove TWRP and all works well. My user data was also untouched.
Click to expand...
Click to collapse
User data should never be affected during an OTA anyway.

This is actually the first time I've unlocked a phones bootloader and stuck with the stock rom. I usually use some kind of popular rom with it's own built in OTA (CM/Viper One)
How often do you guys actually update your phones for OTA? It seems like a real hassle

GloriousGlory said:
This is actually the first time I've unlocked a phones bootloader and stuck with the stock rom. I usually use some kind of popular rom with it's own built in OTA (CM/Viper One)
How often do you guys actually update your phones for OTA? It seems like a real hassle
Click to expand...
Click to collapse
I am rooted now so I'll wait a while before updating an ota until there's a big deal of info. However, in the past if I was sticking with stock there's usually at least one developer who posts the updates with root and stuff built in so you can easily flash with twrp. So I'm kind of waiting for that. That or cataclysm or another awesome rom that's close to stock.

GloriousGlory said:
This is actually the first time I've unlocked a phones bootloader and stuck with the stock rom. I usually use some kind of popular rom with it's own built in OTA (CM/Viper One)
How often do you guys actually update your phones for OTA? It seems like a real hassle
Click to expand...
Click to collapse
I wait for factory image for that build and flash over the new images when they become available (provided that root can still be achieved). Some will do a clean wipe and start fresh with the new build and reload in their apps and user data, others will just dirty flash the updated system (and boot/bootloader or whatever else was changed too).
If you think about it, it really isn't all that different from taking an OTA, the difference is that we're applying the commands to flash instead of having it automated. It's not that big of a trade off in my book.

I have 2 questions...
What is the easiest way to make flashing updates a breeze if I have mods in /system partition? I have heard of "freezing" them. Or is the only option... to delete every mod and flash updates? If so, should I keep a note of every change I make to/system?
And last... Should I make a backup of any file i am replacing or overwriting in /system? And if so, do I have to put them back how they were before flashing an update?

Delete

If you're rooted then you need to download the full factory image, extract system and vendor and flash those. Reflash SuperSU.

roughriduz said:
@amoeller had me flash the modified boot.img for MDB08M then flash the MDB08M system.img and vendor.img from the factory image. I rebooted bootloader, the booted to TWRP and re-flashed supersu. I am now on the November patch without having to remove TWRP and all works well. My user data was also untouched.
Click to expand...
Click to collapse
It’s probably easier and quicker just to flash stock factory images separately instead of having to jump through hoops with OTAs. Like I told @roughriduz just flash the updated partition(s) that were updated like system.img, vendor.img, or whatever and just flash SuperSU in TWRP after.
The steps @roughriduz took was
1. Download and extract latest factory image.
2. Download matching modified boot.img for that build (For example MDB08M).
3. Flash system, vendor, and any other partitions (like radios, etc) with fastboot if they were updated in the OTA. Don’t bother to flash stock recovery because we’re not using an OTA. Flashing userdata.img is just like a factory reset.
4. Boot directly into TWRP and flash SuperSU.
5. Reboot and profit.
This method gives you the latest stock build rooted with TWRP while keeping your data because I hate having to redo my phone.

amoeller said:
It’s probably easier and quicker just to flash stock factory images separately instead of having to jump through hoops with OTAs. Like I told @roughriduz just flash the updated partition(s) that were updated like system.img, vendor.img, or whatever and just flash SuperSU in TWRP after.
The steps @roughriduz took was
1. Download and extract latest factory image.
2. Download matching modified boot.img for that build (For example MDB08M).
3. Flash system, vendor, and any other partitions (like radios, etc) with fastboot if they were updated in the OTA. Don’t bother to flash stock recovery because we’re not using an OTA. Flashing userdata.img is just like a factory reset.
4. Boot directly into TWRP and flash SuperSU.
5. Reboot and profit.
This method gives you the latest stock build rooted with TWRP while keeping your data because I hate having to redo my phone.
Click to expand...
Click to collapse
A couple questions:
1. Step 1 refers to the latest factory image that contains the update, correct?
2. Step two refers to the boot.img that contains root?
3. At what point in this process do you flash the modified boot.img, before or after applying the other images?
Thanks for your help!

JimmyJunk said:
A couple questions:
1. Step 1 refers to the latest factory image that contains the update, correct?
2. Step two refers to the boot.img that contains root?
3. At what point in this process do you flash the modified boot.img, before or after applying the other images?
Thanks for your help!
Click to expand...
Click to collapse
1. Latest factory image is the latest factory image from the nexus factory images page. It's not an update like ota, but rather the entire image they would return you to stock if all is flashed.
2. Flashing a modified boot does not give you root. You still have to flash SU, so saying the modified boot contains root isn't right.
3. I flash boot first unless there is an updated bootloader.

JimmyJunk said:
A couple questions:
1. Step 1 refers to the latest factory image that contains the update, correct?
2. Step two refers to the boot.img that contains root?
3. At what point in this process do you flash the modified boot.img, before or after applying the other images?
Thanks for your help!
Click to expand...
Click to collapse
1. This can be whatever the latest factory image is at the moment. It’s currently MDB08M. All the OTA does is update your phone to whatever build it was made for. Factory images already have previously released updates built into them. You can upgrade but avoid downgrading unless you want to factory reset your phone.
2. I’m referring to the boot.img without root by @mrRobinson found https://www.androidfilehost.com/?fid=24269982086992320 although this process can be used for systemless root also. For systemless root you wouldn’t flash SuperSU in TWRP but instead sideload the SuperSU APK as per Chainfire’s instructions and use the matching systemless root boot.img
3. I don’t think it matters but as long as you have the matching modified boot.img with the system.img installed before you restart, you should be fine.

amoeller said:
It’s probably easier and quicker just to flash stock factory images separately instead of having to jump through hoops with OTAs. Like I told @roughriduz just flash the updated partition(s) that were updated like system.img, vendor.img, or whatever and just flash SuperSU in TWRP after.
The steps @roughriduz took was
1. Download and extract latest factory image.
2. Download matching modified boot.img for that build (For example MDB08M).
3. Flash system, vendor, and any other partitions (like radios, etc) with fastboot if they were updated in the OTA. Don’t bother to flash stock recovery because we’re not using an OTA. Flashing userdata.img is just like a factory reset.
4. Boot directly into TWRP and flash SuperSU.
5. Reboot and profit..
Click to expand...
Click to collapse
What the heck did I do wrong here? I just tried to apply the November OTA update to my MBD08K build, it didn't work, and now I am in the process of doing a full reset and rebuild of my phone (flash-all of factory images from Google)
Here are the notes I made as I attempted to follow the procedure in this thread:
Code:
- Download latest build for MBD08K from https://developers.google.com/android/nexus/images?hl=en
- Extract boot.img, system.img, vendor.img to C:\adb (or wherever where adb and fastboot are
installed). You have to
- Right-click, open command window here
- Ensure USB debugging is enabled on phone (grant permissions on phone if you get the popup)
- In command prompt, "adb devices"
- Should see serial number and "device"
- type "adb reboot bootloader"
- Should get to bootloader screen with little android man lying down with hatch open
- type "fastboot devices" - should see your serial # again and "fastboot" beside it.
- type "fastboot flash boot boot.img"
- type "fastboot flash system system.img"
- type "fastboot flash vendor vendor.img"
- Use volume keys to boot into recovery (in my case TWRP)
- Swipe to allow modifications
- Install -> SuperSU.zip that you should have on your phone from last time.
- Reboot system
I saw a red "your phone is corrupt" scary message on startup... took a while to boot. Couldn't get past the dancing circles.
Interrupted boot, rebooted to fastboot, tried to flash old modified boot.img
Booted again, got encryption unsuccessful warning
Flashed most recent boot.img again, stuck booting forever
try again:
- flash system.img
- flash vendor.img
- flash boot.img (modified)
reboot to recovery - your device can't be checked for corruption (yellow warning instead of red)
- swipe to allow modifications
- reboot with TWRP, swipe to install SuperSU
- Encryption unsuccessful. Prompt to factory reset. Click OK. Boots through TWRP.
Give up, start flashing factory images.
EDIT: I might be the stupidest person alive. I think I should have been using the files for MDB08M. Arggghhhh. Someone please confirm I am an idiot.
Edit 2: Factory reset worked, I am at MDB08M. Now rooting again... grr. At least I backed up all my apps & settings to Google Drive with TB.
Edit 3: Rooted and restoring all apps with TB. If anyone has any insight into where I F'ed up I'd appreciate it.

[How-To] Applying Monthly Security Patches if you're Rooted (Magisk)

So, since once a month I find myself having to click a bunch of links and read how to do a bunch of commands, I wanted to create a thread that (rather generically) explains how to manually flash the OTA monthly updates if you're rooted with Magisk. So, minimally, here's a thread for me to review every month... if it helps you all out, all the better!
Pre-requisites:
Download Latest OTA zip file from Google.
Obtain the STOCK boot.img (required) and dtbo.img (optional) of the System ROM you are currently running. This can be done if you already have the full System Image file downloaded, downloading it currently, or just obtaining the stock boot and dtbo image files elsewhere. (NOTE: This can be skipped if you successfully uninstall Magisk BEFORE you start the process and choose to restore the Stock images in the uninstall process.)
Download Latest Magisk Zip file
Download latest TWRP recovery image
If applicable, have latest USB drivers, adb/fastboot/ files etc.
Preparation:
1) Extract or open the Full Image file and locate the boot.img and dtbo.img files. You will want these on your PC in the platform-tools folder (I usually put the Month name at the beginning, ex. - Jan_boot.img). Again, you can skip if you successfully uninstall Magisk prior to all of this.
2) Copy your OTA zip file to the platform-tools folder, again naming it after the month helps (ex. - Feb_Pixel2XL_OTA.zip)
3) Put your TWRP recovery in platform-tools folder.
4) Place the latest Magisk zip on your Pixel's internal storage (what used to be the SDCard on phones so equipped).
Commands:
1) From PC, open command prompt and change directory to your platform-tools folder.
2) If your phone is on, "adb reboot bootloader" If powered off, press power and Vol Down button to get to Bootloader. Plug your phone into your PC.
3) [If Magisk is not uninstalled first] Command: fastboot flash boot {Name_of_boot.img File}
4) [If Magisk is not uninstalled first] Command: fastboot flash dtbo {Name_of_dtbo.img File}
5) On your phone, hit Vol Down until you see Recovery, then press power button.
6) Once in recovery mode, press power and Vol Up to bring up menu
7) Scroll to item: "Apply update from ADB" and press power
8) Command: adb sideload {Name_of_OTA.zip file}
9) After the OTA finishes flashing, exit recovery back into the Bootloader
10) Command: fastboot boot {twrp_filename.img}
11) Install Magisk Zip file (and any other Zip files you want installed... Kernels, etc.) within TWRP
Then after flashing your zip files, reboot to system and you should be all set.
I believe everything above is correct, but if I've made a glaring mistake, please let me know. I also realize there may be other methods to this madness, but this is what works for me.

With this method do you have to worry about removing your password from your phone before you try to go into twrp?

uofirob said:
With this method do you have to worry about removing your password from your phone before you try to go into twrp?
Click to expand...
Click to collapse
Yes. Mine is set to pin, which I had to put in and it let me finish.

Sweet. I'll give this method a try tonight!
WorldOfJohnboy said:
Yes. Mine is set to pin, which I had to put in and it let me finish.
Click to expand...
Click to collapse

Thank you for this. Just to be clear in step 2 under prerequisites you say more on this later. Then in step 1 for preparation you prefix your boot and dtbo with Jan xx.img. I get what your saying, but for the newer noobs they may get confused. Maybe reword to say, extract or open the factory image your currently using or the previous months image. Obviously you do this first so that you can sideload the ota. I don't mean any disrespect.

I believe you also need remove the -w from the end of the .bat file after you extract the OTA; otherwise, all of your data will be wiped.
But great job of getting all this info in one place!

So I did this, and now I'm bootlooping. I guess I'll re-flash the Jan factory image and wait a little longer... **UPDATE** I fixed the bootloop by re-trying the process again (after re-verifying the MD5 hash on the update.zip. I rebooted after installing the update,
but before the TWRP flash to install MAGISK. Maybe this allowed the "update"
to finish processing. I also had to remove the pin from my lock screen in order to allow me to get into twrp. After rebooting into the system and removing the pin, I adb reboot bootloader and then flashed twrp. Thanks for the guide!
---------- Post added at 07:58 AM ---------- Previous post was at 07:50 AM ----------
PuffDaddy_d said:
I believe you also need remove the -w from the end of the .bat file after you extract the OTA; otherwise, all of your data will be wiped.
But great job of getting all this info in one place!
Click to expand...
Click to collapse
You don't need to remove the -w from the .bat file since you aren't using it at all to do the update. That is only if you're flashing your factory image.

Fe Mike said:
Thank you for this. Just to be clear in step 2 under prerequisites you say more on this later. Then in step 1 for preparation you prefix your boot and dtbo with Jan xx.img. I get what your saying, but for the newer noobs they may get confused. Maybe reword to say, extract or open the factory image your currently using or the previous months image. Obviously you do this first so that you can sideload the ota. I don't mean any disrespect.
Click to expand...
Click to collapse
I changed some wording under prerequisite...

I agree with everything on this guide...
just teasing...
I'm actually glad you created this thread...I wanted to create one also and try and help out as much as I could, but I don't have the cahones and didn' t think I had experience enough to start a "guide" thread :silly:

I mean no disrespect, but this seems awful complicated compared to just flashing the full image with the removed (-w). Especially since your downloading it anyway. I do that then boot the TWRP image and flash the TWRP zip. Reboot into recovery and flash kernel and magisk and reboot system. Again I'm asking for clarity, not dumping on you. Great write up btw!

CyberpodS2 said:
I mean no disrespect, but this seems awful complicated compared to just flashing the full image with the removed (-w). Especially since your downloading it anyway. I do that then boot the TWRP image and flash the TWRP zip. Reboot into recovery and flash kernel and magisk and reboot system. Again I'm asking for clarity, not dumping on you. Great write up btw!
Click to expand...
Click to collapse
Well...I can't speak for the OP, but I wrote my extremely similar identical one because, for whatever reason, many users would choose OTAs over flashing full factory images. I/me & you understand the benefits of the factory images over the OTAs; especially understanding the process you must go through to install the OTAs as-of-current is almost the same as flashing the factory images anyways...
But if I were to give a possible explanation to their reasoning is that, like many of them, I come from a non-Google phone (S5 for me), and OTA's were simpler, takes less bandwidth (which still remains true today), they were significantly simpler to install vs. factory images, and with a lot of popular phones you only flash factory images to recover your phone; i.e. muniz_ri's OTA's for the S5 and FlashFire were loads simpler than flashing a whole factory image. But, again, understanding the difference for Pixel 2 and Oreo's OTA & factory images (or the small difference thereof), it's probably better to do a few extra steps and/or downloads to do the whole image than sideloading an OTA.
In the end, this is for people who insist for OTA updates most likely because that's how they are familiar (and therefore more comfortable) with; whether it being explained to them or not...
Cheers!:good:

Fair enough, thanks for the input!

CyberpodS2 said:
I mean no disrespect, but this seems awful complicated compared to just flashing the full image with the removed (-w). Especially since your downloading it anyway. I do that then boot the TWRP image and flash the TWRP zip. Reboot into recovery and flash kernel and magisk and reboot system. Again I'm asking for clarity, not dumping on you. Great write up btw!
Click to expand...
Click to collapse
It may seem awful complicated, but to be honest, to me is less complicated than having to edit a script file (which if you forget to do, will lose all of your data). Also, though the steps I wrote out seem like a lot more if you were to write out a process using the full image, it actually works out to be almost the same number of steps.
Lastly, as someone else hinted at, the OTA file size is smaller. The only full image you need is what you are currently running (which in most cases I have on my phone in case the sh__ hits the fan with my phone), not the new full image. (To be even more precise, you only need the boot.img and dtbo.img from the full image file--there may be places to get just those two files out there.)
As I put in the last sentence, I realize there are other methods to this madness, this is basically what works for me. I wanted to get it in writing so I wouldn't forget this down the road, and if it helps anyone here, just icing on the cake. Clearly I'm no Dev and not forcing anyone to perform the updates this way!

WorldOfJohnboy said:
It may seem awful complicated, but to be honest, to me is less complicated than having to edit a script file (which if you forget to do, will lose all of your data). Also, though the steps I wrote out seem like a lot more if you were to write out a process using the full image, it actually works out to be almost the same number of steps.
Lastly, as someone else hinted at, the OTA file size is smaller. The only full image you need is what you are currently running (which in most cases I have on my phone in case the sh__ hits the fan with my phone), not the new full image. (To be even more precise, you only need the boot.img and dtbo.img from the full image file--there may be places to get just those two files out there.)
As I put in the last sentence, I realize there are other methods to this madness, this is basically what works for me. I wanted to get it in writing so I wouldn't forget this down the road, and if it helps anyone here, just icing on the cake. Clearly I'm no Dev and not forcing anyone to perform the updates this way!
Click to expand...
Click to collapse
Hey bud, wonder I I could pick your brain just a little. When doing monthly Google updates, are most of their proprietary files located in the boot, dtbo, and vendor images?? Your posts have intrigued me a little, and are very well written BTW. My reasoning is this. On my old 6p, about all we needed to do was flash the new vendor, and of course the bootloader and radio if there were any worthwhile improvements. Would the same possibly apply to the P2XL?? I'm just wondering because, now that we're starting to see custom roms, if this would be a viable option, and simplify the updating process. Thank again for your great write up ??

Badger50 said:
Hey bud, wonder I I could pick your brain just a little. When doing monthly Google updates, are most of their proprietary files located in the boot, dtbo, and vendor images?? Your posts have intrigued me a little, and are very well written BTW. My reasoning is this. On my old 6p, about all we needed to do was flash the new vendor, and of course the bootloader and radio if there were any worthwhile improvements. Would the same possibly apply to the P2XL?? I'm just wondering because, now that we're starting to see custom roms, if this would be a viable option, and simplify the updating process. Thank again for your great write up
Click to expand...
Click to collapse
I'll be perfectly honest with you, I haven't taken a dive to see what is in the OTA files and would imagine that it varies depending on the monthly updates.... that said, the only reason why I have stated to re-flash the stock boot.img is because if you are rooted with Magisk, it takes the stock boot.img and modifies it. In order to take an OTA sideload, you need to be on stock boot.img and stock recovery. dtbo is only in my process because there was one time when I tried to sideload and my dtbo wasn't stock (or corrupt). You may not need to flash the stock dtbo.img, but it doesn't hurt to do so.

WorldOfJohnboy said:
I'll be perfectly honest with you, I haven't taken a dive to see what is in the OTA files and would imagine that it varies depending on the monthly updates.... that said, the only reason why I have stated to re-flash the stock boot.img is because if you are rooted with Magisk, it takes the stock boot.img and modifies it. In order to take an OTA sideload, you need to be on stock boot.img and stock recovery. dtbo is only in my process because there was one time when I tried to sideload and my dtbo wasn't stock (or corrupt). You may not need to flash the stock dtbo.img, but it doesn't hurt to do so.
Click to expand...
Click to collapse
I'm really happy to see our device has graduated to this level of discussion, instead of the random guessing and 14 different "possible" routes to a solution. Lol
Custom roms abound, once TWRP gets squared away and someone master's the art of turning monthly updates into zip installs we'll pretty much be there!
Btw OP, great write up... Clear and precise!

I do not understand the purpose for downloading the full system image and then flashing only the OTA zip - what am I missing? There is a widely distributed method for performing monthly OTA updates by uninstalling Magisk, updating OTA normally, then flashing Magisk again - seems much simpler, any reason why it would not work?

Brenneke said:
I do not understand the purpose for downloading the full system image and then flashing only the OTA zip - what am I missing? There is a widely distributed method for performing monthly OTA updates by uninstalling Magisk, updating OTA normally, then flashing Magisk again - seems much simpler, any reason why it would not work?
Click to expand...
Click to collapse
Downloading the full system image is not required. You only need the Stock versions of boot.img (required) and dtbo.img (optional) of the ROM version your phone is currently running. I actually keep a full system image on my phone in case something goes awry.
I'm going to update the OP to more clearly state that you only need the stock boot.img file--how you obtain it is up to you. Uninstalling Magisk will do the same exact thing, however I tried to do that a couple of months ago and it created more issues for me than if I had just flashed the stock boot.img in the first place.

WorldOfJohnboy said:
Downloading the full system image is not required. You only need the Stock versions of boot.img (required) and dtbo.img (optional) of the ROM version your phone is currently running. I actually keep a full system image on my phone in case something goes awry.
I'm going to update the OP to more clearly state that you only need the stock boot.img file--how you obtain it is up to you. Uninstalling Magisk will do the same exact thing, however I tried to do that a couple of months ago and it created more issues for me than if I had just flashed the stock boot.img in the first place.
Click to expand...
Click to collapse
I have not tried the uninstall Magisk method but plan to do so at next update. What kind of issues did it create for you?
Thanks.

Brenneke said:
I have not tried the uninstall Magisk method but plan to do so at next update. What kind of issues did it create for you?
Thanks.
Click to expand...
Click to collapse
For some reason, I don't think it restored the correct (or not corrupted) boot.img version. Then, there were remnants of the Magisk APK and other files so I ended up having to do a full TiBu of my apps and flashed (with wipe) a full System image. It may have been something I did or just my bad luck, but I prefer not to chance it and instead manually flash the Stock image as my "guide" here states.

Boot loop even after stock recovery! My bacon is cooked!

Okay boys Just got this phone like a week ago. Used it to replace my Samsung that was acting up. Convinced my wife I needed it and then proceeded to toy with it.
I unlocked the bootloader, flashed custom recovery (TWRP latest), and rooted (Magisk latest) to stick recovery. I was running full stock 8.1.0 no custom ROM yet I was doing reading before I wan
ted to flash. Got to feeling comfortable so I got everything ready files downloaded USB hooked up and decided to be safe and make one more back up.
So thats what I did, I made a full TWRP backup, every single partition onto an external USB. So I am safe, right? Best to be safe... But that's when I rebooted from TWRP it boot looped.
So now I am currently stuck at boot. I get the warning screen about the unlocked bootloader then "Google" logo boot screen then a black screen and back to the start again. I knew that wasn't right, so I booted into fastboot with Power + Volume Down, cycled to recovery and selected it then... boot loop. No recovery. Hmmm... That's not good. But keep calm... did some research and found a few things. So i did this...
Heisenberg said:
FAQ can be found in post #3!
[SIZE=+1]10. How To Flash The Factory Images (And Return To Stock)[/SIZE]
Prerequisites: unlocked bootloader (section 1).
This section will explain how to return the phone to be like it was when it came out of the box. This will wipe everything from the phone. If you wish to flash the factory images without wiping your personal data from the internal storage please move on to the next section.
Go to Settings/Backup & Reset and perform a factory data reset. This will remove all of your user data from the device (apps, settings, photos, music, etc).
Download the appropriate factory images for your model here.
Unzip the angler-xxxxxx-factory-xxxxxxxx (x's replace variables) into a directory on your PC (for this guide we'll use C:\angler\).
Once unzipped you should have a folder named angler-xxxxxx (x's replace variables). Open it and move the following files to a new directory named C:\angler\images\:
bootloader-angler-angler-xx.xx.img
radio-angler-angler-xx.xx.img
(Please note that radio and bootloader naming changes from build to build so the filenames and below commands will change with them)
Within C:\angler\angler-xxxxxx\ you'll see another zip archive named image-angler-xxxxxx, unzip the contents of that zip into the C:\angler\images\ folder we created before. Now within C:\angler\images\ you should have the following files:
android-info.txt
boot.img
bootloader-angler-angler-xx.xx.img
cache.img (not present on Android 7.1.2 and above)
radio-angler-angler-xx.xx.img
recovery.img
system.img
userdata.img
vendor.img
Boot into the bootloader and connect your phone to your PC via usb cable.
Open a command prompt from within your fastboot folder (navigate to where you have fastboot.exe located on your PC, shift + right click anywhere within that folder, select open command prompt here), enter these commands to flash:
Code:
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
(above command is unnecessary on Android 7.1.2 and above)
fastboot flash cache C:\angler\images\cache.img
(above command is unnecessary on Android 7.1.2 and above)
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
On 7.1.2 and above you'll also need to boot into TWRP recovery and wipe cache and dalvik cache.
If you wish to you can also relock the bootloader with this command:
Code:
fastboot flashing lock
(This command will wipe all user data from the device)
Important: do not lock the bootloader unless you have first flashed the stock images. Locking the bootloader while you have a custom recovery installed can result in a brick. Please also note that the locking procedure will wipe all user data from the device.
Once all operations are complete you can reboot the device.
Click to expand...
Click to collapse
and that didnt work either so next I tried this
Train88 said:
Like other curious 6P users, I flashed the "full ota" zip to check out Nougat. Then I tried to restore my nandroid for Dirty Unicorns, and apparently TWRP 3.0.2-1 had a fatal flaw that borked the EFS backup. I tried literally everything I could think of, until I saw the process @be_vigilant did to revive his phone. I'm going to be using his process as the base for the guide, as well as linking you to my nandroid that has now helped two other people revive their device.
What you need:
*MMB29P factory image (although MTC20F also worked for someone).
Direct download link: https://dl.google.com/dl/android/aosp/angler-mmb29m-factory-616cf265.zip
*My nandroid backup (its stock MMB29P, decrypted and rooted)
https://www.androidfilehost.com/?fid=24686679545612465
*TWRP recovery image (3.0.2-0 or one of the newer builds that fixed the EFS stuff)
https://dl.twrp.me/angler/
*Android SDK or at least platform-tools (for fastboot, adb, etc)
The Process:
1. Extract the factory image into the location where you have fastboot.exe (mine is C:\Android\sdk\platform-tools)
2. Extract the nandroid backup - doesn't matter where, I'll explain later
3. Make sure you are in bootloader mode, and run flash-all.bat from the factory image
4. Flash TWRP (fastboot flash recovery twrprecovery.img)
5. Boot into TWRP, and make a new nandroid backup. This step is just to create the TWRP backup folder on your device
6. Now go to wipe, advanced wipe, click on each partition one at a time, choose "Repair or Change File System", then select "Repair File System" - do this for dalvik/art, system, data, internal storage, and cache. It may not work for all of them, but its ok.
***you must mount data again in TWRP after doing this, or you will not be able to see anything***
7. Copy & paste my nandroid onto your device in the correct location (sdcard/TWRP/BACKUPS/XXXXXX)
8. Restore my nandroid and try to boot.
9. If it still does not boot at this point, then you need to run these adb commands (while in TWRP) that @bogomil4e kindly reported to wipe the EFS partitions
adb shell dd if=/dev/zero of=/dev/block/platform/soc.0/f9824900.sdhci/by-name/modemst1 bs=16384 -and-
adb shell dd if=/dev/zero of=/dev/block/platform/soc.0/f9824900.sdhci/by-name/modemst2 bs=16384
Now you should be able to boot up and do anything you want again. Please do not mirror my nandroid or take advantage of it - I am making it available only for people to utilize as a way to unbrick their phone!
Click to expand...
Click to collapse
And that didn't work either. To be clear I left my bootloader unlocked. Each process works as far as flashing all the files via fastboot. But if I try to reboot or boot recovery, stock or custom, I boot loop. I have been looking everywhere and I dont see a solution and was hoping to get some help.
edit: Now I have also tried this... Doesnt seem to be the bootloop of death.
XCnathan32 said:
Read First: This method is relatively drastic, and will hurt device performance some. You should only use this as a last resort, if the more basic methods of fixing a soft brick didn't work (e.g, factory reset, flash stock firmware, etc.)​
*Update 8/22: Android O is working with 4 Cores now! Big thank you to @xls654 for finding out how to get Android O to work.
*Petition:
I made a petition for Google to officially release and sign modified boot.imgs, so that people with locked bootloaders can fix their devices too. Check it out here. (I apologize for dumbing it down so much, I wanted to make sure everyone could understand it)
*Changelog:
8/25 - EX kernel for Android O added.
8/22 - Android O DPR6 boot.img and source added.
8/16 - Started making this fix open-source, source code section added in OP. Also uploaded modified Franco and Flash kernel & source.
8/10 - Added PA 7.2.2 and DarkROM boot images.
8/08, 2nd change - Uploaded modified boot.img for firmware 48C.
8/08 - Updated EX kernel to version 4.1.2. This updated zip adds the CPU utilization patch to the init.elemntalx.rc, instead of removing the old init.angler.rc and copying the new init over. That should mean more compatibility with Roms/kernels that modify the init.angler.rc. I also modified the camera-daemon to use cpus 0-3 instead of 0-2, so hopefully this should make the a camera bit faster too.
8/07 - Added boot.img that only uses 1 core. Someone suggested I make a boot.img that only uses 1 core, just to see if it works for devices that didn't work with the 4 Core fix.
7/30 - Added universal EX zip, this zip should modify your kernel to use only 4 cores, and it should modify it to utilize all 4 cores. You can flash this over most ROMs and it should work. Also added a donation url, and this changelog.
7/29, 2nd change - Added Pure Nexus and PA dev version boot images, modified to use 4 cores, and utilize all 4.
7/29 - Updated this fix to greatly improve performance. Before this fix, the device was only using 1 core for foreground tasks, now it will use all 4 cores. Also revamped OP.
7/21 - Fix created, stock boot.img, TWRP image, and EX kernel modified to use 4 cores.
*What this fix does, and how to apply it:
The problem:
The problem with most of the devices in a BLOD, is that a hardware failure related to the BIG cluster has occurred. This fix remedies the problem by disabling the BIG cores. Unfortunately, this does mean that you will take a performance hit. However, I am continually working on ways to improve the device's performance.
The update: If anyone remembers device performance with the first fix, it was hurt a lot, however, after finding out that the device was only using 1 core for all foreground tasks, I modified the ramdisk to utilize all 4 cores more effectively, and it helps a lot.
Requirements: For this fix to work, you need:
A brain
A computer
A bootlooping 6P with an unlocked bootloader/OEM unlocking enabled
The modified files of your choice
Fastboot on your computer (preferably installed system wide). If you do not know what this is, or do not have it, look at this post. Answer yes to all of the prompts to install it.
How to apply the fix:
Boot your phone into bootloader (hold power and volume down).
Connect your phone to the computer.
Go to the folder where you have the modified files, then hold shift and right click in a blank space, click on "open command prompt here" in the menu that pops up.
In the command prompt: type "fastboot flash boot [name of the file here]" and then press enter. If you're flashing TWRP, replace boot with recovery. (Linux users, make sure you're running as root)
Edit: With the new EX zip, you shouldn't need to flash the boot.img anymore, you can just flash twrp, and then flash EX in twrp.
Boot up your phone, and hopefully it should work!
*If your phone is bootloader locked/OEM locked:
You can try to get your phone to boot long enough to enable OEM unlocking. Some users have reported success by freezing their phone for a bit, then booting it. Others have let their battery drain all the way, and then tried to boot their phone, but the most successful method seems to be heating up your phone (a lot).
If you do attempt any of these methods, make sure you have time and patience, as it will take a long time.
To enable OEM unlocking and unlock bootloader:
Go to settings.
Go to developer options, if you do not see that, go to "about phone", scroll to build number, and then tap it 7 times. You should now see developer options in settings.
Once you're in developer options, click on "OEM unlocking" and accept the prompt.
Now reboot your phone to bootloader, connect your phone to the computer, and type "fastboot flashing unlock" Your bootloader should now be unlocked.
*Downloads:
Boot.img from stock 6.17, 8.0 firmware: Download | Mirror. This Image is the from the first official release of Android O, and is modified to use 4 cores. It also disables forced encryption as a bonus. Thank you to @xls654 for figuring out how to get Android O to work.
Boot.img from stock 48C, 7.1.2 firmware: Download | Mirror. This Image is modified to use only 4 cores, and is modified to utilize the 4 cores more effectively. I have had multiple people say that first boot takes a while after flashing this, so just wait about 20 minutes before you declare something is wrong with it.
Boot.img from stock 48B, 7.1.2 firmware: Download |Mirror. This Image is modified to use only 4 cores, and is modified to utilize the 4 cores more effectively. I have had multiple people say that first boot takes a while after flashing this, so just wait about 20 minutes before you declare something is wrong with it.
TWRP version 3.1.1: Download | Mirror. This TWRP image is modified to use only 4 cores.
EX kernel version 5.03: Download | Mirror. EX kernel 5.03 works with android 8.0.0. This zip applies the 4 cores patch, but you will need to flash it over an already modified boot.img to work.
Elemental X kernel version 4.12, universal zip: Download | Mirror. This zip is EX kernel, modified to use only 4 cores. Update: I modified it to apply the CPU utilization patch too, so now this is a universal zip, flash it over almost any ROM, and you should now have the BIG cores disabled fix, and the little core utilization fix.
Flash kernel version 2.5: Download | Mirror. This zip is modified to use only 4 cores, and utilize all 4. Works with android 7.1.2. You can flash this over almost any ROM, including stock, and it should boot again.
Franco kernel r55: Download | Mirror. This zip is modified to use only 4 cores, and utilize all 4. Works with android 7.1.2. You can flash this over almost any ROM, including stock, and it should boot again.
You will most likely not need these images. It will be much easier, and much more universal to flash one of the custom kernel zips above ^^^
PA boot.img from PA version 7.2.2, build 8/10: Download | Mirror. Uses only 4 cores, and has core utilization patch.
PA boot.img from PA version 7.2.1: Download | Mirror. Boot.img from PA dev preview 7.2.1, uses only 4 cores, and is modified to utilize 4 cores more effectively. Flash it after you flash the PA zip, either with fastboot, or TWRP image flash.
Pure Nexus boot.img from Pure Nexus 7/25 build Download | Mirror. This image is modified to use only 4 cores, and it has a tweak to utilize the 4 cores more effectively. Flash it after you flash Pure Nexus, either with fastboot, or TWRP image flash.
DarkROM boot.img from 7/21 build: Download | Mirror. This image is modified to use only 4 cores, and has the utilization patch.
Boot.img modified to use only 1 Core. Some people were reporting that the 4 core images weren't working for them, someone suggested that I make a 1 core version to see if that helps at all. Edit: seems not to help unfortunately. Here it is: Download | Mirror
Unfortunately, I have not been able to get Android O working yet, but I am working on it right now.
If you have a favorite custom ROM or kernel you want to ported over to use 4 cores, let me know, and I'll put it up.
*Source code:
Flash kernel: source | Flash ramdisk/AK2: source.
Franco kernel: source | Franco ramdisk/AK2: source.
Android O boot.img: source.
p-0000000000000000000000000000007 (sorry that was my kitten)
*Tested custom ROMS/kernels
I have used Pure Nexus by flashing the modified EX zip over it, it has notably better performance than the stock ROM, and very good battery life. It's a clean, stable ROM, with plenty of good features that are actually useful.
I have also used Paranoid android dev preview, very good performance, definitely my favorite as of now. Battery life leaves something to be desired, but I have not tried a custom kernel yet. Also, 7.2.1 seemed smoother to me than 7.2.2.
If you have a custom ROM/kernel that worked for you, let me know and I'll put it up here.
*To improve performance slightly:
Flash a custom kernel. I will upload more kernels as I test more, so stay tuned.
Overclock the little cores. It can slightly help offset the lost performance, on my 6P, I have mine overclocked to 1632MHz, and it works perfectly for me. Edit: I actually recommend not overclocking. Many people have reported their Little cores failing, so I would go for longevity on this device, and keep it at stock clocks, or even underclock it. The speed difference you get from overclocking is negligible anyways.
Disable animations in developer options. Seriously, as soon as I found out about this tweak, I've used it on ever single device I've owned, it helps a ton.
Turn resolution down to 1080p. On a small screen, the difference in between 1080p and 1440p is not very noticable. To do this, first get root access, then download a terminal emulator. In the terminal, type "su" and grant it root access, then type "wm size 1080x1920", and finally, change the density "wm density 400". Personally, I like my density at 400, but you can expieriment with it. Lower density=Smaller items and text, Higher density=Bigger items and text. Also @Adithya FRK mentioned that you also want to put density in build.prop so apps display correctly. Change ro.sf.lcd_density=560 to your density, if you changed it.
*Credits:
@rchtk, His post here gave me the idea for how to modify the images.
@flar2, He built the Elemental X kernel for this device, I merely made a small modification to his kernel to use 4 cores. In no way am I trying to steal and/or discredit his work.
The TWRP development team, they built the TWRP recovery for this device, I merely made a small modification to their recovery to use 4 cores. In no way am I trying to steal and/or discredit their work.
@tr1gg3r.man, He made the the PA kernel, I just added a couple modifications. In no way am I trying to steal and/or discredit his work.
@BeansTown106, He made the Pure Nexus kernel, I just added a couple modifications. In no way am I trying to steal and/or discredit his work.
@Dark_Eyes_, He made the DarkROM kernel, I just added a couple modifications to it. In no way am I trying to steal and/or discredit his work.
@[U][COLOR="Purple"]The Flash[/COLOR][/U], He made The Flash kernel, I just made a couple modifications to it. In no way am I trying to steal and/or discredit his work. His posts have also helped me a lot with learning how to build a kernel from source, understanding how to use git more, etc. I recommend you check them out if you are interested in getting started with android development.
@[B]franciscofranco[/B], He made Franco kernel, I just made a couple modifications to it. In no way am I trying to steal and/or discredit his work.
@xls654, He found out how to get Android O working with 4 cores.
FAQs
What's the password for TWRP/Why is TWRP asking for a password? - In android 7.0, Google added forced encryption to the data partition. To get around this, click cancel when TWRP asks you for a password, and then factory reset the device. Then you can flash EX kernel/Magisk to disable forced encryption.
Why am I getting an error when I try to flash the images? - Your bootloader is probably not unlocked, try running the command "fastboot flashing unlock", If you get an error there too, then you will have to enable OEM unlocking before you can continue.
It's not working for me, how do I fix it? - My only advice for that is: "Flash the stock firmware for whatever version image you're trying to flash, then reflash the images again" If you're stuck on the boot animation, wait at least 20 minutes before you declare it's not working. If none of that works, chances are your device may have a different problem.
Does EX kernel have the new speed fix? - Yep, you can flash this over just about any ROM, and it should patch it to use only 4 cores, and use them well.
I would like to help as many people as I can, however, I am much more likely to be able to easily help you/reply to your post if you clearly state your problem and the steps you attempted to fix it. I will be much less likely to reply to posts such as "omggg i flashed the image and my phone won't boot helppp" Please read through post first, I did not spend time typing up this OP for no one to read it. If I can see that you read through the OP and have attempted all the steps, then I will be much more willing to help you.
I set up donations on my profile, for those of you who want to donate. I have spent countless hours modifying, flashing, testing, and helping, don't get me wrong, I love doing this and helping y'all out, but donations really keep me motivated to keep going, and donations also will help me fund new equipment and devices that will help further my android development. Every single donation is appreciated Donate to me here!
If this guide helped you, please click thanks, it means a lot to me
Click to expand...
Click to collapse
Please anybody if your willing to take a swing at helping me I would really appreciate it!
Thanks in advance!

Anybody have any insight?

Were you successful at returning to stock?
If not, I'm afraid you're suffering from the bootloop issue :'(

No i was not, but the standard 4 core fix isn't working for me either so I don't know what else to do.

I did something similar. Tried to update to latest may patch from custom rom. No sim found...so tried some radios..nothing. Thought I better get back to full stock. Similar to you tried the individual flashes and then the OTA as a whole. During that process I locked the bootloader. Now I get the yellow screen text says software isn't standard...then google logo...then the red text says os is corupt possibly...then google logo, forever. No loops it seems but just doesn't boot.
Anyone with thoughts?

i am on my 2nd 6p with the same problem after installing twrp. the first one i got operational by sideloading via twrp a factory img. to get the sideload to work i had to go back to android 6, 7 and 8 would not work. right now the google firmware site is not working, it has been out for a few days, so i have not been able to try it on the second 6p.
edit; now that i recall the factory img would not load after installing. i then went back to fastboot recovery and got the distress robot, twrp was of course gone. from there i did a factory reset which got me back to go and the long climb back to oreo.

Help needed! Qualcomm Crash dump after trying to reinstall magisk upon upgrade to Android 11

Hi,
Lost root access after updating my OnePlus 6T to Android 11 a few days back, hence decided to flash magisk_patched image that I had created around 2 months back. Phone didn't like it ofcourse and gave me a QualComm Crash Dump error.
After searching, managed to boot into bootloader, however wondering how do I now boot my phone - I have downloaded and installed latest recovery (3.5.2_9.0-fajita.img) and am able to boot into recovery as well as bootloader/ fastboot.
Have also downloaded the zip file for Android 11 stable version - OnePlus6TOxygen_34.J.60_OTA_0600_all_2108052232_8c516d0cce8795.zip
Question - What do I need to flash this? adb commands don't seem to be working, only fastboot commands seem to. Can I just "push" this zip file in fastboot or is that only for img files?
Any help woud be massively appreciated!

The update to 11 does not agree with Magisk which causes it to either fail to complete the update or to die at early boot depending on how bad things were messed up. You can reapply root once the update to 11 is finished though, so you can still have root.
In your case manually upgrading to 11, letting it finish the upgrade, and then installing Magisk again is your best bet, in which case you would either have to find something that understands the update format or manually extract the updated partitions from the payload, iirc

Extracted boot.img and used fastboot command : fastboot boot boot.img, but this doesn't seem to have worked as well. Just thinking aloud what else can be done?
Edit - It now tries to boot, but then seems to go into OnePlus Recovery (from the chinese characters displayed along with an option to choose English language)
sam_htc_touch said:
Have also downloaded the zip file for Android 11 stable version - OnePlus6TOxygen_34.J.60_OTA_0600_all_2108052232_8c516d0cce8795.zip
Question - What do I need to flash this? adb commands don't seem to be working, only fastboot commands seem to. Can I just "push" this zip file in fastboot or is that only for img files?
Click to expand...
Click to collapse

Masamune3210 said:
The update to 11 does not agree with Magisk which causes it to either fail to complete the update or to die at early boot depending on how bad things were messed up. You can reapply root once the update to 11 is finished though, so you can still have root.
In your case manually upgrading to 11, letting it finish the upgrade, and then installing Magisk again is your best bet, in which case you would either have to find something that understands the update format or manually extract the updated partitions from the payload, iirc
Click to expand...
Click to collapse
Hi, thanks for responding. I am not even concerned about root right now, just want my phone to boot up first Any suggestions on what can I try?

sam_htc_touch said:
Hi, thanks for responding. I am not even concerned about root right now, just want my phone to boot up first Any suggestions on what can I try?
Click to expand...
Click to collapse
For the benefit of others, all sorted finally y'day evening. Plenty of helpful tips in this thread
(Well I was able to boot into Android 11.1.1.1 - no root as yet, but I will perhaps look into that later, can't stand those annoying ads :-D )