Related
HI all,
Ca you help me in flashing RCmixHD [2.3.3,SENSE 2.1,720p video,tb unlock] v1.0.1 ROM. I need to know which are the files I have to download and flash. Thanks in Advance.
With regards
<Manic>
There is a whole section titled ROM links, it shouldn't be that hard to work out :/
If you're generally referring to flashing a custom rom then have a good read at the Nexus One wiki, it'll help you understand a little more.
manicsen said:
HI all,
Ca you help me in flashing RCmixHD [2.3.3,SENSE 2.1,720p video,tb unlock] v1.0.1 ROM. I need to know which are the files I have to download and flash. Thanks in Advance.
With regards
<Manic>
Click to expand...
Click to collapse
ill upload it. the rom seems to be only showing up as 1.01mb on the OP thread. ill post link when im done
charlieb620 said:
ill upload it. the rom seems to be only showing up as 1.01mb on the OP thread. ill post link when im done
Click to expand...
Click to collapse
It might help if you read the posting fully. You need to download all three files.
1. RCmixHD 1.0
2. USB Fix
3. 1.0.1 Update
Install them in this order, reboot between each install. And make sure you fully wipe your device first.
What about for Version 1.1.. I think i can download that single file and flash the ROM..
hi,
i downloaded RCmixHD [2.3.3,SENSE 2.1,720p video,tb unlock] v1.1 ROM and flashed it after full wipe..
During the time of flashing i am getting this message.. Kindly help me in clearing this problem
E:Missing file:
ext/system-VR/0419/libCBLexMgr.0419.so
E: Verification failed
zip verification failed
zip isn't signed correctly.
Installation aborted..
manicsen said:
hi,
i downloaded RCmixHD [2.3.3,SENSE 2.1,720p video,tb unlock] v1.1 ROM and flashed it after full wipe..
During the time of flashing i am getting this message.. Kindly help me in clearing this problem
E:Missing file:
ext/system-VR/0419/libCBLexMgr.0419.so
E: Verification failed
zip verification failed
zip isn't signed correctly.
Installation aborted..
Click to expand...
Click to collapse
Disable signature verification(If you're using RA Recovery, you can see 'toggle signature...', and I think Clockwork also has such option) and try it again.
Hi,
Is it Safe to flash Unsigned ROM.. or i have to wait for Signature once full ROM is there..
<Manic>
manicsen said:
Hi,
Is it Safe to flash Unsigned ROM.. or i have to wait for Signature once full ROM is there..
<Manic>
Click to expand...
Click to collapse
Although it warns about unsigned ROM/updater, I think if it is from reliable developer, it's usually OK, though I feel developers should sign their .zip files after packing is done.
thanks.. i have flashed already
I'm getting this error when trying to flash lollipop roms. I can flash Kitkat roms fine as I'm currently running xdabbeb VS982.5 1.0.0 (G3 rom), but it won't let me flash any lollipop rom. I installed twrp via the autorec program which installs 2.7.0.0 then I updated twrp within twrp with the flashable zip.
Please help
Thank you
Anyone?
Seriously no one knows? What is everyone else using that is flashing the latest 5.0.2 roms?
What am I getting this error?
Please help
Possible Fix
I've also had this problem. The only way I can seem to fix it is to also download the .md5 along with the rom itself. Just make sure its in the same folder as the rom. Everytime I have that problem with TWRP this seems to fix it. Let me know if it works for you!
Edit: Also I forgot to mention, if one isn't available to download I can help with that.
Thanks for the suggestion. I'll give it a try. If there is no. Md5 what do I do then?
All you need to do if it comes to that is download an md5 checker on your computer. Just curious, what rom are you trying to flash?
I tried resurrection remix and liquid lollipop roms. I had no issues with the initial 5.0 lollipop roms so I'm not sure what changed with 5.0.2.
So the md5 checker generates the .Md5 then you just put that on the SD card with the rom?
Resurrection remix should have an md5 on the download page right below the rom itself.
derekmt95 said:
All you need to do if it comes to that is download an md5 checker on your computer. Just curious, what rom are you trying to flash?
Click to expand...
Click to collapse
Can you point me to the program to use on my computer? Do I just load the .zip file in the program to generate the .md5sum file then put both the zip and the .md5sum file on the sdcard before flashing?
Thanks
derekmt95 said:
I've also had this problem. The only way I can seem to fix it is to also download the .md5 along with the rom itself. Just make sure its in the same folder as the rom. Everytime I have that problem with TWRP this seems to fix it. Let me know if it works for you!
Edit: Also I forgot to mention, if one isn't available to download I can help with that.
Click to expand...
Click to collapse
Nope, I downloaded the md5 file along with the zip and I'm still getting the same "error executing updater binary in zip".
Any other suggestion? How is no one else having this same issue? I'm using the latest version of TWRP 2.8.3.1 probably like most people. I don't understand.
xxNiradxx said:
Nope, I downloaded the md5 file along with the zip and I'm still getting the same "error executing updater binary in zip".
Any other suggestion? How is no one else having this same issue? I'm using the latest version of TWRP 2.8.3.1 probably like most people. I don't understand.
Click to expand...
Click to collapse
Try to reflash the TWRP.. or maybe is something wrong with the zip file
Use the TWRP compiled by blastagator
Nope, still getting same error with latest twrp.
Finally got it working. I downgraded TWRP to 2.7.0.0 and the lollipop roms are flashing fine now.
Thanks everyone for your help.
xxNiradxx said:
Finally got it working. I downgraded TWRP to 2.7.0.0 and the lollipop roms are flashing fine now.
Thanks everyone for your help.
Click to expand...
Click to collapse
How did you downgrade because I cannot seem to find a way to do it.
TheAnonymousButler said:
How did you downgrade because I cannot seem to find a way to do it.
Click to expand...
Click to collapse
just run AutoRec again and you are all set.
LG G2 cm-11 M12 : Error executing updater binary in zip (TWRP)
kashif87 said:
just run AutoRec again and you are all set.
Click to expand...
Click to collapse
Hi, I am having the same problem. Actually my LG G2 was stuck in boot loop with secure boot error. I used SRK tool to flash the partition files as well as TWRP recovery 2.8.6.1. I have wiped everything and there is no OS installed. I am stuck in TWRP recovery screen [cannot downgrade /upgrade]. I am using and OTG cable to flash the cm-11 custom ROM but it is giving me the same error. Can anyone help ?? It has been 10 days I am trying and my phone is dying please help...
Thanks in advance...
before flash 5.1.1 aosp lollipop rom u must to flash first lollipop bootstack
Hi,
I am assuming the reply was for me. Actually I am not installing lollipop. I am going for kitkat but nothing is working now. I have tried cm-10.2, cm-11 M12, cm-11 M7 but all are showing "error executing updater binary in zip". Please if someone can help me out....
Thanks is advance....
@[email protected] i think kk aosp room need jb bootleader
Hello everyone,
I am running a D802 on stock Lollipop and installed TWRP 2.8.6.0 via AutoRec. Now I booted into recovery, wiped System and Cache and got the Error message when installing CrDroid (Marshmallow 6.0.1). Now I tried installing TWRP 3.0.2.0, which succeeded and then downloaded the twrp 2.7.0.0 zip to try that as the ROM still wouldnt install. But it wont install the older TWRP. So I am asking for help to either
1) Install TWRP 2.7.0.0
or
2) Delete the getprop lines from updater-script (after I removed them I get an error 6 so i probably removed too much?)
Thank you in advance
(Guide for Error 7: http://forum.xda-developers.com/showthread.php?t=2522762)
EDIT: Someone said installing another Kernel might allow installation of the ROMs. Which Kernel could work for my phone?
EDIT 2: When flashing TWRP 2.7.0.0 it says "assert failed: run_program("/tmp/loki.sh")==0". So what exactly am I missing on my phone? Is Loki the MM Bootloader?
EDIT 3: Could it be that the build.prop was deleted when I wiped system? Would be weird if that was the cause, but I simply dont know..
Edit: Booted in Downloa Mode and flashed v30D KDZ with the 2014 LG Flashtool. Works with Stock ROM for now
Hi,
I downloaded and flashed successfully the OmniRom image on my phone this morning, but not the EAS Kernel (v2) provided by @darkobas few days ago. Everytime I try it (I download a couple of times, in case something wrong happen) I get the same error message on TWRP.
Could not find 'META-INFO/com/google/android/update-binary' in the zip file.
Error Installing zip file '/sdcard/ROMs/OmniRom/darkobas-zl1-easkernel-v2.zip'
Do I have to use a more recent TWRP? the one I'm using is 3.0.2-0
Or is it I'm missing something?
I searched on XDA, but I didn't see anyone reporting this.. so I suppose it's a really noob issue.
Thanks for the help!!
try downloading again
Sent from my LEX720 using Tapatalk
darkobas said:
TRY THIS TWRP!
Click to expand...
Click to collapse
...
lluis.hs said:
Hi,
I downloaded and flashed successfully the OmniRom image on my phone this morning, but not the EAS Kernel (v2) provided by @darkobas few days ago. Everytime I try it (I download a couple of times, in case something wrong happen) I get the same error message on TWRP.
Could not find 'META-INFO/com/google/android/update-binary' in the zip file.
Error Installing zip file '/sdcard/ROMs/OmniRom/darkobas-zl1-easkernel-v2.zip'
Do I have to use a more recent TWRP? the one I'm using is 3.0.2-0
Or is it I'm missing something?
I searched on XDA, but I didn't see anyone reporting this.. so I suppose it's a really noob issue.
Thanks for the help!!
Click to expand...
Click to collapse
same for me...
It worked like a charm now @darkobas! Thank you!
Working! Thanks @darkobas
if you have successfully flash the onim rom,change to "flash image" then flash the boot.img extracted from the eas kernel zip.
I've downloaded the zip file but get error message E:unknown command and error installing zip file /sdcard/download/ lineage-15 etc, i have a lex 720 witch is supposed to work with the new os.
ps: hope anyone can help
Terje
Imadummy said:
I've downloaded the zip file but get error message E:unknown command and error installing zip file /sdcard/download/ lineage-15 etc, i have a lex 720 witch is supposed to work with the new os.
ps: hope anyone can help
Terje
Click to expand...
Click to collapse
Twrp? Screenshot?
kurtn said:
Twrp? Screenshot?
Click to expand...
Click to collapse
Yes i used Twrp i dont know how to ta screeshot in twrp, but thats the message i got when tried to install it.
It's been a while, but I think I had the same error when I first tried to install LOS14.1. I was coming from Marshmallow and the issue was the TWRP version not being compatible with LOS14.1, Nougat. My fix was to update TWRP. Kinda late, but hopefully useful to someone...
How to fix this error. I can only flash AOSiP ROM.
I have tried by clearing assert lines using notepad++.
I am using TWRP 3.2.1
Please help me ASAP
Anuraj KR said:
How to fix this error. I can only flash AOSiP ROM.
I have tried by clearing assert lines using notepad++.
I am using TWRP 3.2.1
Please help me ASAP
Click to expand...
Click to collapse
Download new recovery for latest roms. Else you wlll face problems. You should be on latest firmware before flashing custom roms
sk.vyshak said:
Download new recovery for latest roms. Else you wlll face problems. You should be on latest firmware before flashing custom roms
Click to expand...
Click to collapse
Thanks for reply?
Still getting error 7.
I have deleted "assert" command. I'm using twrp 3.2.I hope it's the latest for k6 power.But evert time I flash AICP oreo and DOT oreo roms,I'm getting "Failed to update vandor image" and "Error:7".
Why guys??I've tried somany times.Please help me.