Related
As far as the automatic backlight setting goes, it is my understanding that the phone should check how bright (or dark) it is, and adjust the display brightness accordingly (brighter when out in the sun, darker when sitting indoors / dark rooms).
However, it seems to me it just sets the backlight at ~40% and that's it. I went out into the sun with my HD2, and the brightness didn't change and I had trouble seeing what was on the screen.
Is there some kind of way I could test, if the light sensor is working? Or is this setting simply badly designed and I should set the brightness myself?
I'm currently running latest Energy ROM (23569 Cookie May 09) but it was the same with the stock ROM, so I don't think it's related.
PS. A little side question, if I may; if I perform task 29 before flashing... do I still need to do a hard reset after flashing a new ROM?
...in the very least... are there any apps that make use of the light sensor?
Well I know the acctualy percentage in the settings never changes when its on auto (atleast not for me)
But I can clearly tell a difference between being in a dark room and the backlight being on low
to being in the sun and it on max.
Ive also never had trouble reading the screen, the screen is always plenty bright enough.
Prehaps you've got a bad one?
Shaamaan said:
...in the very least... are there any apps that make use of the light sensor?
Click to expand...
Click to collapse
I know an app that can measure the amount of light in lumers.
lonelykatana said:
I know an app that can measure the amount of light in lumers.
Click to expand...
Click to collapse
Care to share the name of that app?
Also, it's difficult for me to say if the screen is busted or not. On max brightness (as opposed to the automatic setting) it's a lot more comfortable to look at in the sun, albeit indoors it's OK on any setting really.
EDIT: I don't suppose the automatic setting can be tweaked for better performance via some registry changes?
Shaamaan said:
Care to share the name of that app?
Also, it's difficult for me to say if the screen is busted or not. On max brightness (as opposed to the automatic setting) it's a lot more comfortable to look at in the sun, albeit indoors it's OK on any setting really.
EDIT: I don't suppose the automatic setting can be tweaked for better performance via some registry changes?
Click to expand...
Click to collapse
I think it's called Lumos.
Try searching for it.
You certainly can test it. Just cover the light sensor (upper left corner above the screen) with something. I don't recommend thumb, as you might press 'start' button. You will also need any application with white background.
The brightness should clearly drop.
Auto only sets the brightness from 20% to 60% (or so it seems). But the effect is clearly visible.
Dr.Sid said:
You certainly can test it. Just cover the light sensor (upper left corner above the screen) with something. I don't recommend thumb, as you might press 'start' button. You will also need any application with white background.
The brightness should clearly drop.
Auto only sets the brightness from 20% to 60% (or so it seems). But the effect is clearly visible.
Click to expand...
Click to collapse
No change at all.
I'll restore the stock ROM to see if it's a firmware issue, and I'll check that Lumos application.
EDIT: Lumos clearly detects light changes and works well. Seems it's either something to do with Energy ROM after all or possibly I'm just blind and I can't see any changes. I'm still going to check the stock ROM, just to be safe.
BTW, once more, can someone tell me quickly if hard resets are needed after task 29?
EDIT 2: OK, it DOES work after all, I'm just blind; the change however, on the automatic settings, is minimal. I actually had to put the phone under a light-bulb, as covering the sensor didn't really work. I wonder if it should be calibrated like the g-sensor...
night time
i think the day time brightness is fine but the night time setting is far to bright. i would love for this to be customizable as well
rdbthrgnaRDg
Dr.Sid said:
Auto only sets the brightness from 20% to 60% (or so it seems).
Click to expand...
Click to collapse
Can this range be increased?
For indoor use the auto-adjust works fine for day/evening/night, but outside I always need to turn off the auto-adjust, so it can go to 100%. When back indoor again, then switch to auto again and so on ... and so on ... and ...
Just installed .NET CF + Lumos and will see how it works out.
.NET CF for laptop and automatic install to HD2 via ActiveSync:
microsoft.com/downloads/details.aspx?FamilyID=E3821449-3C6B-42F1-9FD9-0041345B3385&displaylang=en
Latest Lumos v10 RC2:
forum.xda-developers.com/showthread.php?t=450318
I installed a battery booster app from the market, and it had an option to dim the screen, it was on 11%, well i tried to adjust it, and i guess i went way to far and it turned my screen black, i cant see nothing.
im on the Darkstone build.
is there a way to either delete that app or what, i know the phone works as i feel the vibration from me sliding it to unlock from home screen.
aznsHD2 said:
I installed a battery booster app from the market, and it had an option to dim the screen, it was on 11%, well i tried to adjust it, and i guess i went way to far and it turned my screen black, i cant see nothing.
im on the Darkstone build.
is there a way to either delete that app or what, i know the phone works as i feel the vibration from me sliding it to unlock from home screen.
Click to expand...
Click to collapse
The LCD still light up but very dim, so try going into a dark room and wake up the phone. Then you will be able to see the contain on your phone.
10507 said:
The LCD still light up but very dim, so try going into a dark room and wake up the phone. Then you will be able to see the contain on your phone.
Click to expand...
Click to collapse
no its literally black, i cant see anything.
aznsHD2 said:
no its literally black, i cant see anything.
Click to expand...
Click to collapse
Not even in a totally dark room?
10507 said:
Not even in a totally dark room?
Click to expand...
Click to collapse
Like i said it is BLANK. seriously blank. its not dim or nothing.
Is there a way to restore the brightness on here, because i cant see anything im doin on it.
what you can try to do is, grab a friends phone and try to immitate the same touches on both devices, the best way to do it is by unlocking it, pressing the menu key, click on the corner to make sure u go to the settings, scroll all the way up and find your way to "display" tipically the 4th (or 5th in my case because i have cyanogen mod) and brightness (should be the one at the top) and just try to drag ur finger from left to right to increse it (as it should over pass any 3rd party app) and see if it works, but..... keep in mind these things dependeding on what phone you use to guide you....
screen size
DPI scale
sense??? or not! as settings are different
and other things, also..... when you unlock it make sure its on the home screen
i also believe if you go outside you can see the screen a little bit under the sun, but not completely sure
hope this helps, oh and by the way, if you have a build based on sense go to a sprint store and use an EVO lol, or if u have stock froyo grab a nexus one from a friend and use that (but like i said before, keep in mund the screen size)
yea thats what i was tryin to do. no luck.
I had this problem twice and rejoice, I have a solution!
Simply download "DroidExplorer" for windows.
Boot your phone in android.
Once booted (when your screen turns black), plug in USB, and launch DroidExplorer.
In DroidExplorer, look for the "Screencast" icon (little android icon).
Run that, you will see your screen. Reset brightness to a normal level.
You are saved
aznsHD2 said:
I installed a battery booster app from the market, and it had an option to dim the screen, it was on 11%, well i tried to adjust it, and i guess i went way to far and it turned my screen black, i cant see nothing.
im on the Darkstone build.
is there a way to either delete that app or what, i know the phone works as i feel the vibration from me sliding it to unlock from home screen.
Click to expand...
Click to collapse
When this happens, try shining a bright light on the screen, make sure the device is woken up (i.e. press a hard button) and view your screen from different angles. Even if the backlight is completely off, the LCD display is still active and the graphics elements just about visible.
With this method, you should be able to make enough of your screen to navigate to the brightness settings.
Screencast in Droid Explorer (for your PC) is also a good last measure.
Most apps that control brightness has this problem on HD2, so be careful about going too low in all of them. In Tasker, for example, 30 is the lowest setting that works.
Even the standard screen dimming that occurs a few seconds before screen timeout is not calibrated correctly. In all Android builds/kernels I have tried, the backlight is turned off when it should be just dimmed. Cyanogen(mod) has a setting for the dim level, but the maximum you can use is 26, which still turns off the backlight.
Curiously, sometimes (very seldom) after waking my phone up from standby, the backlight is in a much dimmer state than usual. When sliding the standard brightness from min to max, the actual brightness range varies from barely visible (but still on) to the regular dimmest level. So the device *can* support incredibly dim levels, but I've have found no way of getting into this state predictably. It has happened only 3-4 times over the past 2 months. A reboot fixes it, but I've also gotten out of this state after a locking/unlocking cycle.
So there seems to be several layers to the backlight brightness:
- the actual hardware (which supports much lower brightnesses than we're usually allowed access to)
- the Android API (which probably is the layer turning backlight off below 30, and which occasionally is fooled into using a much dimmer range than usual)
- whatever app providing the GUI (usually showing a range of 0-100% or 0-255).
Does anyone know if there's a reason for the threshold? Is it somehow risky for the LCD display hardware to be very dim?
who knows how to turn off the light sensor? should that be always at maximum
Is it that thing that make my screen going dark sometimes and then bright again ?
I thought it was a bug in Android about the screen light management...
I'm very interested in turning it off me too.
I didn't look very hard, but from what I can see, you can't.
Is it that thing that make my screen going dark sometimes and then bright again ?
Click to expand...
Click to collapse
Yes, it does just that hinders and tired eyes!
The above sentence makes absolutely no sense.
sorry,I mean ,that light sensor kills my eyes
Still it makes no sense at all!
N.
Ok guys, we all agree that his english is horrible, but it is understandable that he is saying that the changing / blinking of light, all the time, is not confortable for eyes.
I admit... for once, I understand his words...
huliqan said:
sorry,I mean ,that light sensor kills my eyes
Click to expand...
Click to collapse
Turn the brightness down if it is uncomfortable? The reason why it changes automatically is to adjust to the amount of light in a given place. Otherwise, you'd have to constantly change the brightness yourself in order for the screen to be visible in all conditions.
Yes, I think we all know what is that function for, that's not the point.
The problem is that, in the same place with the same light, if, for example, your head make a shadow over or if you put your finger on the little hole up right the phone, the light of the screen will change as if you where in a place darker.
So according how you move the phone or hold it, your eyes will have to accomodate very often and it's very uncomfortable.
Maybe covering permanently that little hole will be the solution... but I would prefer just to turn it off.
Covering it permanently will also permanently place the backlight in the darkest mode. Personally I like this feature, once you know it's there it doesn't give a 'wth is happening'-feeling anymore and I believe it saves battery (no need for full brightness in dark places). Also for me it kinda gives that viewing-on-paper feeling, the device is quite okay in maintaining a balance between minimum visibility and overlighted eye-blasting power
Though yes an off-feature would be welcome sometimes ^_^
I would also Love to Disable this sensor.. More Brightness! MORE more more i tell ya! lol
Hi everyone
I want to share a workaround to all of us who owns a defective S5
Symptom: You unlock your phone and it doesn't show anything. Actually, the phone is working. Capacitive buttons light up and you may heard some activity in the phone
Your phone has a defective screen. There are a lot S5 which have this problem, according to several forums. After several tries, unlock and lock over and over, the screen light up and you are able to use your phone. The problem is when you receive a call and you want to know who is calling you, the screen doesn't illuminate and you won’t be able to know who is.
Here's a workaround which makes your powerful S5 usable and take out from your drawer.
Solution:
The more effective way to fix it is: change defective screen! But sometimes it could cost as much as a new phone, or simply you can't afford it, and it's better to change your phone instead, and you put your S5 in a drawer.
The technical explanation of this problem is: Screen doesn't receive enough electrical current at low brightness levels (maybe the flex is defective, get old, etc)
Most probably the wake up problem exist together with screen flicker at low brightness levels
The wake up problem rises up more in dark environment, when light sensor make low bright screen
The lock screen light up screen, with a dim effect: when you lock the phone, it slowly turn screen off, and when you unlock, it make and effect of dim screen.
When you are is in dark environment, the effect is very slow, preventing the screen illuminate because the technical problem explained before.
When you are in very light environment, you lock screen and sensor light make the screen very brilliant and chances are you defective phone wakes up correctly.
We can use an app which give us complete control over brightness subsystem. I use an app called Velis AutoBrightness:
Once installed from Play Store, it shows a Setting Wizard. Follow the instructions. Below are some notes
• 1/7: Welcome Screen
• 2/7: How bright... Most probably is your phone always have flicker in low brightness. Choose "AMOLED" or "AMOLED bright". By the way choosing any one of those cure always minimum brightness failure!
• 3/7: Choose High sensitivity
• 4/7: On, if you want additional brightness when charging. Irrelevant for this thead. Choose your favorite setting
• 5/7: Same of 4/7
• 6/7: Choose enable: That enable the app
• 7/7: Some additional notes: Press Done
Now important settings: go to Menu > Settings > General: Settings Mode > Advanced
Service Activation settings:
• Disable system handler > ON: When you use Power saving mode, you surely noted screen flicker, which is very annoying, and make unusable power saving mode. By set this ON: Android doesn't set screen too dim; instead Velis have a minimum of brightness set by Wizard 2/7. (Surely you find out that you avoid screen flicker, by setting autobrightness off and slider in 8-10%)
Sensors settings:
• Screen-on sensor value override: Set this value to 30000. Read below this post if you want technical explanation of this setting
After you establish these settings, you'll be able to unlock your phone all the time!
This is the trick: When you unlock your phone, you'll note that the screen is very bright (because Screen-on to 30000) and quickly adjust to the environment light. The failure is that electrical current to screen is defective, and when exterior light is dark, the screen make a dim effect and doesn't light up.
Note to Marshmallow users:
• This app make use of Screen overlay permisions: And marshmallow is very restrict with this kind of app. This is specially true when you are installing an app. All you have to do is deactivate the app in notification screen: press "OFF" button, adjust system brightness upper enough to not flicker the screen, install your app, and activate Velis Autobrightness again
• Because of Doze mode, wake up from this mode may avoid your screen light up, the first time you use your phone. Let 10-15 seconds your phone wake up, lock again, and unlock again, and velis will make its work!
I hope this post make your smartphone usable. I barely apply this trick to two phones, but I think this is a good workaround!
I used this app & the flickering is still available
What worked for me is downgrading the firmware on my g900f all the way back to Android 4.0. My phone came with version 5.0 and I noticed the problem only after I kept installing samsung's system updates. Will report if the problem starts up again but I'm running rooted and running nougat just fine so I don't see a reason to keep upgrading the firmware.
Edit: nevermind, this didn't work
Reyse said:
The technical explanation of this problem is: Screen doesn't receive enough electrical current at low brightness levels (maybe the flex is defective, get old, etc)
Click to expand...
Click to collapse
Does anyone know for sure if it's the flex cable or some capacitors? I notice only the lower half of my screen flickers.. I bet there's a simple electrical fix for it instead of replacing the whoooole display
fbs said:
Does anyone know for sure if it's the flex cable or some capacitors? I notice only the lower half of my screen flickers.. I bet there's a simple electrical fix for it instead of replacing the whoooole display
Click to expand...
Click to collapse
Hello,
Have you change jour battery? If it s old it could cause some issues...
But try to buy a genuine one, I think that your battery must be old now.
Bye
cedouic said:
Hello,
Have you change jour battery? If it s old it could cause some issues...
But try to buy a genuine one, I think that your battery must be old now.
Bye
Click to expand...
Click to collapse
it doesn't make any sense. the lower half of the screen flickers in green even on charger
fbs said:
it doesn't make any sense. the lower half of the screen flickers in green even on charger
Click to expand...
Click to collapse
I noticed that screen only flickers at low brightness when using Boeffla kernel for LOS14 and others based on it.
No issue for the same device with LOS or Stock based kernels.
zlazaar said:
I noticed that screen only flickers at low brightness when using Boeffla kernel for LOS14 and others based on it.
No issue for the same device with LOS or Stock based kernels.
Click to expand...
Click to collapse
you're wrong
I was using los16 with stock kernel for months with flicker everyday
fbs said:
you're wrong
I was using los16 with stock kernel for months with flicker everyday
Click to expand...
Click to collapse
+1 to that , i even went back to stock and the screen flicker appeared and such issues are well known already with samsung amoled panels back in 2014-even some panels from 2018 . So def not kernel related.
I was using los 15.1 and this problem got worse. The phone was barely usable as mentioned by the op. In my case, the screen would start flickering below 60%. Then I switched back to stock marshmallow. I noticed that 100% brightness in los 15.1 is actually only about 70% in the stock rom.
I have been using the phone at 80% brightness for some weeks now and the problem has significantly reduced. But not completely gone, it's much much better. Also, you might want to avoid using dark wallpapers.
first of all, guys its a temporary fix, but will work for sure.
so u just have to put your device on max brightness(100%) for atleast 1 or 2 days,
and the flickering will stop next day.
i hope it ll work for you guys too, it worked for me.
its not purely a hardware issue sometimes it happens because of moisture, or when device is in low temperature for sometime.
putting brightness at max will warm the display, and flickering will stop.
tell me if it works.
beinghunny said:
first of all, guys its a temporary fix, but will work for sure.
so u just have to put your device on max brightness(100%) for atleast 1 or 2 days,
and the flickering will stop next day.
i hope it ll work for you guys too, it worked for me.
its not purely a hardware issue sometimes it happens because of moisture, or when device is in low temperature for sometime.
putting brightness at max will warm the display, and flickering will stop.
tell me if it works.
Click to expand...
Click to collapse
I suggest using Blue light filter or night mode app they can lower screen brightness and protect eyes..
Yeah i think it worked for me, thanks for the idea.
Install cf.lumen by chainfire and configure it as your need. In master filter mode select temperatures and turn brightness up then darken it as your needs. Cf.lumen uses driver, not a screen filter. By this your screen won't flicker and you can save you battery too.