I have a SM-G950U1 can I flash SM-G950W? - Samsung Galaxy S8 Questions and Answers

I am on Telus and bought a USA phone. I have flashed the updates using Odin and the HOME_CSC so that it could be carrier set to Telus.
However, it still does not get wifi calling and volte even though I've had the carrier enable it too. The CSC did enable HD voice though.
My question is whether I can flash the offical Telus firmware on my phone as the hardware looks to be the same.
I believe I will need the modded Odin but just wondering if anyone has had success with other models rom on their phones.

Related

[Q] Can I flash UK firmware on my canadian GS5?

I bought my GS5 from Canada which means it's set on canadian LTE bands, now I'm trying to use my phone in UK and it doesn't connect to data network, not even HSPA so I was thinking that flashing a UK firmware might solve the problem because I read somewhere that since GS5 runs on Qualcomm its hardware supports all LTE bands by default but I am still afraid that the wrong firmware might brick my device. Can anyone please confirm that information. thx a lot
As long as that firmware is supported by your specific GS5 model this should not be a problem.
I live in South Africa and have flashed many stock firmwares from different countries.
Just a note... you might not have to reflash the entire ROM but merely flash a supported modem/change the csc. Changin the csc does however factory reset your phone.
Yes but a different csc file from the stock rom version will prevent the phone from receiving ota update. Anyway it's not my phone so I won't take any risks and the owner seems to be fine with hspa connection.
Search sammobile.com for the phone model and stock firmware from UK. Just flash that and then you won't have to change the csc
Sent from my SM-G900F using XDA Premium 4 mobile app

[Q] Do I need to unlock to use BTU firmware?

I recently purchased a Galaxy S4 i9505 on EE from Carphone Warehouse, and flashed the 5.0.1 BTU firmware. After I did that I then read I'd need to be carrier unlocked, but I tried calling and receiving calls and messages and using 4g and it worked fine. I also saw some posts about flashing modems. Anyway I'm really confused about what I need to do; should I try and unlock or not. Thanks everyone for your help.
The BTU firmware has no carrier branding, which means it has no carrier logos or bloatware included in it. Other than the lack of carrier doodads, it's the same firmware. You shouldn't need to flash a modem as you already have the latest, from when you installed the BTU ROM. However, the S4 would need to be unlocked for use on any carrier if your SIM isn't an EE SIM. But, you either have an EE SIM, in which case you don't need to worry about it, or the S4 was unlocked by the store that sold it, in which case you don't need to worry about it.
TL;DR: Don't touch the ROM. Don't worry too much about the SIM because you can make calls and use data. You don't need to flash a modem.

SM-935V

I would like to know if it's possible to flash the firmware for
T-mobile I'm looking to leave verizon I know that the Verizon variant does not have 2 of the lte bands that T-mobile uses can I use Odin to Flash the 935t firmware to get the band's or am I asking something that is not possible. Thanks in advance
Rich7591110 said:
I would like to know if it's possible to flash the firmware for
T-mobile I'm looking to leave verizon I know that the Verizon variant does not have 2 of the lte bands that T-mobile uses can I use Odin to Flash the 935t firmware to get the band's or am I asking something that is not possible. Thanks in advance
Click to expand...
Click to collapse
The answer is NO you're asking firmware to replace/add hardware and that's not possible
I have a Verizon branded s7 edge and used Odin to load the 935U PI3 firmware. I am on T-Mo now and do have LTE band 12 working (validated with LTE Discovery). The research that I did found that the US variants have all the radios in them, but some carrier variants of firmware disable certain bands. By doing the 935U firmware, I also got rid of the notice on every reboot that I was using a non-Verizon SIM. So I now have all T-mo bands and no stupid SIM message.
Rich7591110 said:
I would like to know if it's possible to flash the firmware for
T-mobile I'm looking to leave verizon I know that the Verizon variant does not have 2 of the lte bands that T-mobile uses can I use Odin to Flash the 935t firmware to get the band's or am I asking something that is not possible. Thanks in advance
Click to expand...
Click to collapse
I can vouch for same experience as SF-IT guy. I bought a G935V and flashed with G935U firmware via odin. Works on T-mobile, even wifi calling works. Currently on the latest PI3 version of G935U firmware. I would that you search the forum to see if you can flash the G935T firmware directly. The only downside of using G935U firmware is that the FM radio chip is not enabled in the firmware. I read that the all the carrier versions (September security patch and newer) of the G935 firmware have the FM radio chip enabled. I prefer the 935U version because it there is not carrier bloatware. Samsung bloatware is still there.
davekung said:
I can vouch for same experience as SF-IT guy. I bought a G935V and flashed with G935U firmware via odin. Works on T-mobile, even wifi calling works. Currently on the latest PI3 version of G935U firmware. I would that you search the forum to see if you can flash the G935T firmware directly. The only downside of using G935U firmware is that the FM radio chip is not enabled in the firmware. I read that the all the carrier versions (September security patch and newer) of the G935 firmware have the FM radio chip enabled. I prefer the 935U version because it there is not carrier bloatware. Samsung bloatware is still there.
Click to expand...
Click to collapse
So what would the FM radio chip do? Just enable FM radios is all? Because if that's the downside then it's not a major setback as not too many people use the FM radio.
I don't think you can
cyoo97 said:
I don't think you can
Click to expand...
Click to collapse
You definitely can. All US versions of the S7 & S7 Edge are the same hardware and can be flashed to any other US firmware. (including the U firmware that automatically works on all 4 carriers)
andrewNY said:
You definitely can. All US versions of the S7 & S7 Edge are the same hardware and can be flashed to any other US firmware. (including the U firmware that automatically works on all 4 carriers)
Click to expand...
Click to collapse
So what you're saying is that flashing the U version firmware will unlock by default all 930"X" and 935"X" phones? As in it just unlocks the mofo and debloats some while you're at it?
What's the catch? It seems too easy
Tin_Man_0 said:
So what you're saying is that flashing the U version firmware will unlock by default all 930"X" and 935"X" phones? As in it just unlocks the mofo and debloats some while you're at it?
What's the catch?
Click to expand...
Click to collapse
Bloat is definitely gone on the U firmware, which is great. My phone runs faster and has more free space too.
I think some carrier features aren't supported on the U firmware. On T-mobile everything works (VoLTE and Wi-Fi Calling), but I think AT&T might have some issues with those.
If the phone is SIM locked to a particular carrier, I'm not sure that automatically gets turned off or not when you switch to the U firmware. You might need to contact your carrier first to get an unlock code?
andrewNY said:
Bloat is definitely gone on the U firmware, which is great. My phone runs faster and has more free space too.
I think some carrier features aren't supported on the U firmware. On T-mobile everything works (VoLTE and Wi-Fi Calling), but I think AT&T might have some issues with those.
If the phone is SIM locked to a particular carrier, I'm not sure that automatically gets turned off or not when you switch to the U firmware. You might need to contact your carrier first to get an unlock code?
Click to expand...
Click to collapse
What if I got a temporary unlock from t-mobile unlock app and then flashed this firmware? Would it make it permanent? Seems quite possible, but I don't know if the temporary unlock actually unlocks the phone or just inserts a bypass that would disappear if flashed.
andrewNY said:
Bloat is definitely gone on the U firmware, which is great. My phone runs faster and has more free space too.
I think some carrier features aren't supported on the U firmware. On T-mobile everything works (VoLTE and Wi-Fi Calling), but I think AT&T might have some issues with those.
If the phone is SIM locked to a particular carrier, I'm not sure that automatically gets turned off or not when you switch to the U firmware. You might need to contact your carrier first to get an unlock code?
Click to expand...
Click to collapse
I unlocked my US TMo phone when stock, rooted, and am running Echoe - which has a glitch where WiFi calling sort of works (can receive calls but not make them). In the TMo forum, there are threads on U - your comments here are more specific to what I am interested.
Which U firmware are you on and are you rooted (is is updated to latest v4 bootloader version), and did you have to ODIN and full wipe with CSC or did you get by with CSC Home to preserve data?
Also, are you on U CP or did you flash TMo CP to get all the bands?.
.
duplicate - XDA burped
Thanks everyone

Installing AT&T firmware on unlocked Verizon S7 Edge SM-G935V

I've purchased an unlocked Verizon S7 Edge, model SM-G935V, but haven't received it yet. I'm an AT&T customer. The phone should work on AT&T's network since it's unlocked, but I just realized it'll probably still have Verizon-ified firmware, and might not work with certain AT&T-specific features like HD voice, video calling, or voicemail. How will the Verizon firmware behave when it's on the AT&T network? Can I install the latest AT&T firmware on this phone instead, using a similar method to what people are doing for the 935U firmware? I prefer a stock AT&T firmware rather than a beta or rooting. Thanks in advance!
There's another thread in this forum "Stock Firmware for SM-935A (AT&T)". Should I just flash that to my unlocked SM-935V, and essentially turn it into a 935A? I believe the hardware of all S7 Edge models is identical, so I'm hoping that will work.
I did this and applied the 7.0 update - and now I can't seem to revert to any other software. If I were you, I'd flash the U update and forget about carrier-specific garbage.
raduque said:
I did this and applied the 7.0 update - and now I can't seem to revert to any other software. If I were you, I'd flash the U update and forget about carrier-specific garbage.
Click to expand...
Click to collapse
Thanks. Did you have any problems getting LTE data to work with your 935V once it was on the AT&T network? I saw a few mentions from people saying they could only get slower data connections, until they called AT&T to "provision LTE for their SIM" or something. I get the impression it's not enough just to have an AT&T SIM card - like the AT&T network has a registry of phone IDs, and non-AT&T branded phones won't be in it, and so won't get LTE data.
From browsing the 935U thread, it sounds like that firmware is receiving updates much more slowly than the carrier-specific firmwares. The U firmware also wouldn't provide the missing AT&T-specific features I was looking for, like HD voice or WiFi calling, so I'm not convinced it would really be an improvement over just keeping the Verizon fw. But maybe I'll feel differently once I actually get my hands on the phone and play with it - all I'm doing now is reading forum threads and checking my mailbox.
Honestly couldn't tell you. I'm on Verizon with my main device (S7e on U FW). I only flashed the AT&T FW (PK1) so I could flash the unreleased Nougat files.
Now, I can't seem to flash anything but an AT&T rom.
Also FWIW, the U firmware is getting updates slower than carrier roms, but it's still the better rom - untouched by the carrier's bumbling idiot of a dev team, no pre-loaded carrier junk you can't get rid of (only disable), better battery life and better performance.
More FWIW, I don't care about HD Voice or Wifi calling - both those are irrelevant to me.
At&t release today on 2/17/17 official update to Nougat 7.0 build BQA6 with February security.
Clicking from Edge of Galaxy.
I want to do the opposite - flash G935V onto G935A, with the intention of eventually being able to flash back G935A. Not sure if I could do this, though.
Sent from my SM-G930V using Tapatalk
I've got my phone working now. The short answer is yes, as far as I've found, you can flash any carrier's firmware to your S7 Edge. There may be some limitations if the bootloader version on your phone is different from the new firmware's bootloader version, but fortunately I didn't run into that. I went from the Verizon firmware to the AT&T firmware and then to the unbranded 935U firmware.
But for best results, a branded S7 Edge should be used with the same branded firmware, and on the same network. Otherwise you may run into some problems, or certain carrier-specific features won't work. In my case, my Verizon-branded S7 Edge is unable to get Wifi calling and HD Voice (aka VoLTE) on the AT&T network with an AT&T SIM card, no matter what firmware version I use.
s.chamberlin said:
I've got my phone working now. The short answer is yes, as far as I've found, you can flash any carrier's firmware to your S7 Edge. There may be some limitations if the bootloader version on your phone is different from the new firmware's bootloader version, but fortunately I didn't run into that. I went from the Verizon firmware to the AT&T firmware and then to the unbranded 935U firmware.
But for best results, a branded S7 Edge should be used with the same branded firmware, and on the same network. Otherwise you may run into some problems, or certain carrier-specific features won't work. In my case, my Verizon-branded S7 Edge is unable to get Wifi calling and HD Voice (aka VoLTE) on the AT&T network with an AT&T SIM card, no matter what firmware version I use.
Click to expand...
Click to collapse
Really? That's strange. I successfully flashed V firmware on my A and HD voice & WiFi Capping are active
Sent from my SM-G935V using Tapatalk
So you did the opposite direction of what I did? I've read that AT&T is more restrictive about these features than some other carriers, which is maybe why it didn't work for me. I can't find it now, but there was an AT&T community forums thread in which a rep straight-out said that those features won't work on a non-AT&T-branded phone or other unlocked "bring your own device" phone.
To be fair, I'm not certain HD Voice isn't working, since there doesn't seem be a definitive way to test for it. With the AT&T firmware, attempting to turn on wifi calling would give me an error saying it couldn't be activated on my device. With the unbranded 935U firmware and an AT&T SIM card installed, I don't even see an option for turning on wifi calling.

Obtaining ATT Specific Functions On An Unlocked Phone

Hey Everybody,
So I've come to realize that my unlocked US S10+ on AT&T didn't have VOLTE or Wifi calling as options in the communication/call settings menus. this is pretty disappointing as it seems that using the unlocked phone with Verizon you get these features, and they make a decent impact on my use of the phone.
My understanding is if I flash the ATT firmware to the phone I would get the functions, so being an amateur I followed some simple guides to SamFirm AND ODIN, and downloaded the ATT CSC firmware for my model number. However after going through the Odin process and resetting my phone it is still showing the same Software information as prior to my installation, and I do not have the features.
I saw a thread on the board stating that the ATT firmware isn't available yet, so I'm not sure if what I downloaded was actually any different than what is on my phone,and my phones "Service Provider Software Version" did already have ATT in the description, which is a bit confusing to me.
Am I correct in understanding the only way to get the features would be through a firmware flash? And would anyone know if I had flashed the right firmware, and what the original firmware CSC would be for my model if I needed to revert?
My information is:
Model Number:
SM-G975U1 (S10+ ceramic white 512GB - Unlocked US)
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
Firmware file obtained from SamFirm:
SM-G975U1_1_20190225093814_9wyh9qbuyg_fac
AP file name for reference:
AP_G975U1UEU1ASBA_CL15445662_QB22243196_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
If it's anything like the S9 was, you can't just ODIN the firmware/CSC. You'll just get the bloat with none of the features you want.
Goronok said:
If it's anything like the S9 was, you can't just ODIN the firmware/CSC. You'll just get the bloat with none of the features you want.
Click to expand...
Click to collapse
I've heard this as well. If you want those features on a Samsung phone, it has to be at&t branded. I ordered an at&t phone from Samsung since I make good use of wifi calling. It works fine on my unlocked P3XL but no dice on the Samsungs.
I have the same phone and service and when I went to update my imei they told me it could not find the phone. So I was without lte/4g for a day until I gave them a imei to a s8 active. Now I have data at least
Darthshadow666 said:
Hey Everybody,
So I've come to realize that my unlocked US S10+ on AT&T didn't have VOLTE or Wifi calling as options in the communication/call settings menus. this is pretty disappointing as it seems that using the unlocked phone with Verizon you get these features, and they make a decent impact on my use of the phone.
My understanding is if I flash the ATT firmware to the phone I would get the functions, so being an amateur I followed some simple guides to SamFirm AND ODIN, and downloaded the ATT CSC firmware for my model number. However after going through the Odin process and resetting my phone it is still showing the same Software information as prior to my installation, and I do not have the features.
I saw a thread on the board stating that the ATT firmware isn't available yet, so I'm not sure if what I downloaded was actually any different than what is on my phone,and my phones "Service Provider Software Version" did already have ATT in the description, which is a bit confusing to me.
Am I correct in understanding the only way to get the features would be through a firmware flash? And would anyone know if I had flashed the right firmware, and what the original firmware CSC would be for my model if I needed to revert?
My information is:
Model Number:
SM-G975U1 (S10+ ceramic white 512GB - Unlocked US)
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
Firmware file obtained from SamFirm:
SM-G975U1_1_20190225093814_9wyh9qbuyg_fac
AP file name for reference:
AP_G975U1UEU1ASBA_CL15445662_QB22243196_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
Click to expand...
Click to collapse
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
So I have the same service provider software, on my unlocked s10+, however when I went into an ATT store and looked at a branded S10+
I noticed the service provider software version to be : SOAMC_SM-G975U1_OYM_ATT_PP_0033( thirty three at end),
so anyway to update the service provider version? does that come from the SIM ??
I have an unlocked S10 plus and I flashed the AT&T Firmware. I now have VoLTE and WiFi calling unlocked on my phone using AT&T. You need to make sure you flash the U version of the firmware, not the U1 one. Unlocked S10 is using the U1 firmware already so flashing that one again changes nothing.
beethoven1854 said:
I have an unlocked S10 plus and I flashed the AT&T Firmware. I now have VoLTE and WiFi calling unlocked on my phone using AT&T. You need to make sure you flash the U version of the firmware, not the U1 one. Unlocked S10 is using the U1 firmware already so flashing that one again changes nothing.
Click to expand...
Click to collapse
Where did you get the att firmware?
Sent from my SM-G975U using Tapatalk
I kinda doubt it but did any of you with unlocked phones that flashed the AT&T firmware get any better service? I've been considering it to get VOLTE but just wondered
jamgam said:
I kinda doubt it but did any of you with unlocked phones that flashed the AT&T firmware get any better service? I've been considering it to get VOLTE but just wondered
Click to expand...
Click to collapse
I followed this thread https://forum.xda-developers.com/galaxy-s10/how-to/att-ota-ota-updates-t3909697
At first like you I downloaded the wrong version and nothing changed. I finally flashed G975USQU1ASBA and now have VOLTE/WIFI Calling and of course all of the bloat. But at least those two functions are working. Make sure that you complete a clean flash when I did a dirty flash I had problems sticking on the loading screen.
I believe you just need to call in ATT to take care those carrier specific features .
Which firmware can I flash with Odin to my S10+ Xfinity Mobile unlocked to get AT&T OTA updates? Currently have ASF7 flashed from the latest unknown firmware uploaded to Sammobile. I flashed w/o USERDATA. I just want to be able to get future OTA updates as I just switched my carrier from Metro by T-Mobile to AT&T. I was using U1 US unlocked firmwares on my Note9 & S10+ but want to use carrier perks now with AT&T.
What's with AT&T being the only ones to not release update files? You would think they all would be required to release them. More AT&T customers need kick up a fuss about it.

Categories

Resources