[HELP]G530H XCU All Sensor's Stop after Flash LineageOS - Galaxy Grand Prime Q&A, Help & Troubleshooting

after installing an update of LineageOS Nougat, the sensors stopped picking up, even after installing the orginal rom they are still dead :crying:

Related

S3 Neo (I9300I) Bootloops randomly

Hi guys! my s3 neo started randomly bootlooping after 1 year, I had RR 5.5.9 on it. I noticed that if I press button_vol_up when bootlooping the phone starts to access recovery, but suddenly continue rebooting so I tried to wipe ALL in the s3 neo from TWRP and with Odin I reflashed a new version of TWRP. After that, I clean installed the RR 5.5.9 and for a few days started working good.
Yesterday night the problem seems reappeared and then I soldered a new power button thinking it was the problem ( even if it's a random problem, it seems) but without fixing this problem. So I decided to desolder the power_button and starting using without it, and the phone was working very good, after 6 hours booom! the bootlooping is still here.
Can anyone help me? Thanks in Advance
When your RR is based on CM12.1 then the bootloop occurs when you install some new updated apps. You have 3 choices.
1) avoid these apps
2) Inform the developer of the apps, that with the new update your cm12.1 version gets a bootloop. The bootloop occurs, when the updated Version of the app was build with the new android build tools. The Solution is to use aapt instead of aapt2
3) upgrade to cm13 or cm14.1 . Theres also a RR based on 14.1. I didn't try this version, but i think with this rom you will not have the bootloop
same problem.
I have tried to flash it with many firmware without any success.
any help
alaa92 said:
same problem.
I have tried to flash it with many firmware without any success.
any help
Click to expand...
Click to collapse
What exactly is your problem?
Meanwhile there are quite stable Custom Roms that would be there:
- CM 12.1 from December 2017 (no more bootloops!)
- LOS 14.1 from August or also December 2018
- crDroid from November 2018

Pie roms don't boot on my g900f

Hello everyone
I have S5 g900f 16GB on Stock marshmallow ROM and an unknown baseband
I managed to be run aosp 6.0 and 7.1 as well as 8.1 ROMs smoothly without any problems, but when it comes to 9.0 ROMs things start getting ugly. I get stock on the first boot screen showing Samsung Galaxy ST and then reboots to the same screen again
I tried dirty flashing and clean flashing too but with no luck I tried with and without gapps and root but again same result
ROMs I have tried are Los16 by haggertk and AOSP Extended
Please help.
Managed to have it working by flashing boeffla kernel 15.1 ???

SM-G901F Cant install any rom except android 8.0 roms

hello, i cant install any rom or firmware except lineage os 15.1 or unnofficial rr. It started with the stock rom so i thought installing a newer rom could fix it. Every time i try to install nougat roms or any firmware it installs normally and boots, but it would just reboots randomly everytime (time is diffrent from rom to rom). Any help? It cant be broken kernel cause i tried lineage os 14.1 kernel and rom and it still reboots. Maybe Bootloader?

ROM 7.1 does not start

Hello. I have a problem, I wanted to upload rom in version 7.1.2 but unfortunately it did not work, when I first started I was constantly loading and charging. So I installed an unofficial 8.X. rom. and this works (the phone is booting) but it does not work in camera, operator services and more. I do not know what's going on, why do not I get ANY rom in version 7.1.2 and lower? I also uploaded clean rom 7.0 via fastboot but at the first start it stops at "bootloader is unlocked" and nothing happens. I have the latest TWRP installed, I am asking for help for 2 days without a phone call, I am depressed. sorry for my English
emiloski94 said:
Hello. I have a problem, I wanted to upload rom in version 7.1.2 but unfortunately it did not work, when I first started I was constantly loading and charging. So I installed an unofficial 8.X. rom. and this works (the phone is booting) but it does not work in camera, operator services and more. I do not know what's going on, why do not I get ANY rom in version 7.1.2 and lower? I also uploaded clean rom 7.0 via fastboot but at the first start it stops at "bootloader is unlocked" and nothing happens. I have the latest TWRP installed, I am asking for help for 2 days without a phone call, I am depressed. sorry for my English
Click to expand...
Click to collapse
Okay if your operator services aren't working on the unofficial 8.0 Rom then you might have the wrong phone model or your modem is mismatched. Because I know the one you're talking about it's the GZOSP 8.0 rom I installed that one and my cell service worked but the rom was very buggy. If you're using a XT1575 US variant of the Moto X Pure then it's likely your modem if you came from Marshmallow or didn't OTA Nougat to the latest version. See the stock Nougat firmwares you can flash over fastboot have a different modem than the latest Nougat OTA this will cause a dead modem and bootloop on custom roms like NucleaROM or Lineage Unoffical 16.0. Some roms on XDA are for Marshmallow only and your phone won't boot them if you're on a Nougat modem and vice versa. Here's what I recommend flash stock Nougat over fastboot then OTA your phone to the latest version of Nougat it should be on a October 1st, 2017 security patch once you get on that flash the latest TWRP then flash Unofficial Lineage OS 14.1 from hashbang173.
Customs Roms and TWRP for Nougat Modem
https://forum.xda-developers.com/moto-x-style/general/custom-roms-nougat-modem-t3733105
Threads with stock firmware:
[XT1575] https://forum.xda-developers.com/moto-x-style/general/moto-x-pure-xt1575-flash-nougat-t3922367

Need help getting camera to work on stock rom 20f coming back from Lineage 18.1

I need some help getting camera to work on stock rom 20f by dimm0k after trying Lineage 18.1 and didn't prefer it. The camera app would launch, show the camera UI, but the lens doesn't turn on and the app just freezes. I tried restoring my backup of 20f, factory reset, formatted everything and installed 20f rom clean. But nothing is working. Reinstalling Lineage 18.1 does bring back the camera, but fingerprint sensor doesn't work in Lineage so I'd rather stick with Oreo. Does anyone know how to fix this?
Thanks in advance.
rom I started with:
[ROM] [US996] US99610k/10l/10n/10o/10p/20f Stock ROM TWRP Flashable Zip KEEP ROOT!
with very little activity lately for the LGV20, especially with the unlocked US996 variant, I created a TWRP flashable package for the recent US99610k release. this zip flash every partition included in the latest KDZ package with the exception...
forum.xda-developers.com
Lineage 18.1:
[OFFICIAL] LineageOS 18.1 for the LG V20
LG V20 - Your warranty is now void. - You have been warned. - Use at your own risk. Introduction: This is the Official Lineage OS 18.1 thread for the LG V20. Downloads: Please follow the install instructions in your device's Wiki page...
forum.xda-developers.com

Categories

Resources