Database Users

Firmware Help Needed

So on my wife's sprint s7, she setup finger print scanner for lockscreen. But some how got locked out. So all it would ask for is the password which she didn't remember either. So my only option was a factory reset. I did that in recovery but when it went thru setup, it wanted the Gmail associated with that device which was her email. It wouldn't take that either. So came down to needing to odin stock firmware. I forgot the other day her phone updated to PJ2 firmware. Well all I came across online was stock firmware for PF2. I used the newest odin and filled all slots with appropriate files and flashed. Get nothing but failed. Assuming it's because I couldn't downgrade firmwares. My total fault. I haven't odined or rooted my phones since the note 5. Where it was just one file to fill in on the ap slot on odin. So basically her phone is a paper weight because when I reboot it, it goes thru setup but once it gets to the point of connecting to network, it just wants to sit there. Does anyone have any suggestions? Is there another firmware I can download to get my wife's phone working again? I couldn't find PJ2 Stock firmware anywhere online. Please help!!!

Try the unlocked firmware. PG9 was the unlocked version just prior to PI3 (the latest unlocked version). This will allow you to have hotspot without rooting.
http://www.sammobile.com/firmwares/download/97548/G930UUEU2APG9_G930UOYM2APG9_TMK/

Cooljb said:
Try a later firmware. PH7 was the version just prior to PJ2. This might work.
http://www.sammobile.com/firmwares/download/98479/G930PVPU2APH7_G930PSPT2APH7_SPR/
Click to expand...
Click to collapse
I ended up flashing G930U API3 firmware and I got it working again because it has the new bootloader like PJ2. I wonder if I can go from that to PH7? I would really like to stay on a Sprint firmware

powerstroke said:
I ended up flashing G930U API3 firmware and I got it working again because it has the new bootloader like PJ2. I wonder if I can go from that to PH7? I would really like to stay on a Sprint firmware
Click to expand...
Click to collapse
I totally screwed up my last post. I copied it from notepad and most of it didn't copy over, which I just now realized after reading your quote of my post. I had written exactly what you ended up doing - flash the unlocked firmware and use Shortcut Master Lite app to enable hotspot. I also got the versions wrong. The versions I posted are the sprint firmware, not the unlocked. Been a long day. Did you get hotspot working?
---------- Post added at 03:33 AM ---------- Previous post was at 03:20 AM ----------
powerstroke said:
I ended up flashing G930U API3 firmware and I got it working again because it has the new bootloader like PJ2. I wonder if I can go from that to PH7? I would really like to stay on a Sprint firmware
Click to expand...
Click to collapse
Unfortunately when you switch to/from the sprint firmware to/from the unlocked firmware, your phone's data will be wiped, so essentially factory reset. So you would lose hotspot if you flashed back to the sprint firmware from the unlocked firmware. You could root, but the root for this phone on the sprint firmware is tricky and unstable. And I'm pretty sure from what I've read in the rooting thread that the last couple of versions of the sprint firmware (PH7 and definitely PJ2) cannot be rooted. I think the last sprint firmware version that you can even get root on is maybe PE1, and I don't think you can downgrade to that version any more because of the new bootloader.

Cooljb said:
I totally screwed up my last post. I copied it from notepad and most of it didn't copy over, which I just now realized after reading your quote of my post. I had written exactly what you ended up doing - flash the unlocked firmware and use Shortcut Master Lite app to enable hotspot. I also got the versions wrong. The versions I posted are the sprint firmware, not the unlocked. Been a long day. Did you get hotspot working?
---------- Post added at 03:33 AM ---------- Previous post was at 03:20 AM ----------
Unfortunately when you switch to/from the sprint firmware to/from the unlocked firmware, your phone's data will be wiped, so essentially factory reset. So you would lose hotspot if you flashed back to the sprint firmware from the unlocked firmware. You could root, but the root for this phone on the sprint firmware is tricky and unstable. And I'm pretty sure from what I've read in the rooting thread that the last couple of versions of the sprint firmware (PH7 and definitely PJ2) cannot be rooted. I think the last sprint firmware version that you can even get root on is maybe PE1, and I don't think you can downgrade to that version any more because of the new bootloader.
Click to expand...
Click to collapse
Ain't really too worried about root at this point. Just wanna know if since I'm on the unlocked fw, can I ever flash back to sprint fw?

powerstroke said:
Ain't really too worried about root at this point. Just wanna know if since I'm on the unlocked fw, can I ever flash back to sprint fw?
Click to expand...
Click to collapse
I'm pretty sure you can. I had done it from an earlier unlocked version to an earlier sprint version. I think as long as the bootloader of the sprint firmware you're trying to flash back to is at least as new as the bootloader of the unlocked firmware you're coming from, it should work. But I haven't done it myself with these newer firmware versions. I bet after your wife uses the unlocked version for a while, she won't want to go back to the sprint version. I've never looked back since I tried the unlocked firmware. The only reason I did flash back to sprint firmware was just to see if it could be done. I immediately flashed the unlocked firmware back onto my phone. I really hate what sprint does to this phone with all the sponsored apps and sprint apps they dump on there, and most you can't remove or disable.

Cooljb said:
I'm pretty sure you can. I had done it from an earlier unlocked version to an earlier sprint version. I think as long as the bootloader of the sprint firmware you're trying to flash back to is at least as new as the bootloader of the unlocked firmware you're coming from, it should work. But I haven't done it myself with these newer firmware versions. I bet after your wife uses the unlocked version for a while, she won't want to go back to the sprint version. I've never looked back since I tried the unlocked firmware. The only reason I did flash back to sprint firmware was just to see if it could be done. I immediately flashed the unlocked firmware back onto my phone. I really hate what sprint does to this phone with all the sponsored apps and sprint apps they dump on there, and most you can't remove or disable.
Click to expand...
Click to collapse
So I just read this thread, and just want to confirm. I'm on PJ2 on sprint. I can flash G930U API3 firmware with Odin and get rid of all the sprint bloat correct? Will the device still work on Sprint's network then? And I can root PI3? If this is all correct I'll be doing this today lol.

Macguyver said:
So I just read this thread, and just want to confirm. I'm on PJ2 on sprint. I can flash G930U API3 firmware with Odin and get rid of all the sprint bloat correct? Will the device still work on Sprint's network then? And I can root PI3? If this is all correct I'll be doing this today lol.
Click to expand...
Click to collapse
That's what I'm curious about ,I need G930PVPS4APJ2 to fix my phone, if the one your talking about works then I'll use that if data works.

Cooljb said:
I'm pretty sure you can. I had done it from an earlier unlocked version to an earlier sprint version. I think as long as the bootloader of the sprint firmware you're trying to flash back to is at least as new as the bootloader of the unlocked firmware you're coming from, it should work. But I haven't done it myself with these newer firmware versions. I bet after your wife uses the unlocked version for a while, she won't want to go back to the sprint version. I've never looked back since I tried the unlocked firmware. The only reason I did flash back to sprint firmware was just to see if it could be done. I immediately flashed the unlocked firmware back onto my phone. I really hate what sprint does to this phone with all the sponsored apps and sprint apps they dump on there, and most you can't remove or disable.
Click to expand...
Click to collapse
That is correct. You can flash unlocked fw API3 and get rid of all the sprint junk.

Whysthewifigone? said:
That's what I'm curious about ,I need G930PVPS4APJ2 to fix my phone, if the one your talking about works then I'll use that if data works.
Click to expand...
Click to collapse
Yes flash API3 unlocked fw for now until PJ2 gets released. That's what I had to do to get data to work again

powerstroke said:
Yes flash API3 unlocked fw for now until PJ2 gets released. That's what I had to do to get data to work again
Click to expand...
Click to collapse
I can't find API3 on SamMobile. Am I just missing it? I'm looking under G930U firmware listing.

Macguyver said:
I can't find API3 on SamMobile. Am I just missing it? I'm looking under G930U firmware listing.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=69146723

powerstroke said:
Yes flash API3 unlocked fw for now until PJ2 gets released. That's what I had to do to get data to work again
Click to expand...
Click to collapse
thanks,i really hope it works. all other firmwares below pj2 dont flash

powerstroke said:
Yes flash API3 unlocked fw for now until PJ2 gets released. That's what I had to do to get data to work again
Click to expand...
Click to collapse
it worked!!! im so freaking happy,almost a week without my phone. you just saved me 800 bucks almost. thank you so much

Whysthewifigone? said:
it worked!!! im so freaking happy,almost a week without my phone. you just saved me 800 bucks almost. thank you so much
Click to expand...
Click to collapse
So you have working voice and data? Do you get all the sprint LTE bands?

Whysthewifigone? said:
it worked!!! im so freaking happy,almost a week without my phone. you just saved me 800 bucks almost. thank you so much
Click to expand...
Click to collapse
Your welcome bud

Macguyver said:
So you have working voice and data? Do you get all the sprint LTE bands?
Click to expand...
Click to collapse
Yeah should have all sprint LTE bands

powerstroke said:
Yeah should have all sprint LTE bands
Click to expand...
Click to collapse
Thanks for you help. One more dumb question and I'll try to leave you alone. What about updating PRL & Profile? Are you still able to do that? Don't have to mess with APN settings or anything? My phone is running fine I just want to run a cleaner ROM so I want to make sure I don't bork it. Thanks for the help.

Macguyver said:
So you have working voice and data? Do you get all the sprint LTE bands?
Click to expand...
Click to collapse
Everything is working called this phone with my other, works fine, data is good too

Whysthewifigone? said:
Everything is working called this phone with my other, works fine, data is good too
Click to expand...
Click to collapse
Are you able to update the PRL & profile or did it just work?

flashing back to g930v from g930u

Quick question. I want to flash back to g930v version because I don't get phone reception with g930u version for some reason.
I'm currently onG930U-APL2 and I heard I need to flash G930v of the same revision otherwise I will not be able to boot up. But I looked at https://www.sammobile.com/firmwares/database/SM-G930V/ and I don't see any APL2 versions for G930V. Which one can I flash? Can I flash the 7.0 version?
Thanks!

It's not the same version you have to flash, it's the same or higher bootloader version you have to flash. You can flash Nougat. Before going back to Verizon firmware, did you enable Verizon APN in settings on the U-firmware?

CVertigo1 said:
It's not the same version you have to flash, it's the same or higher bootloader version you have to flash. You can flash Nougat. Before going back to Verizon firmware, did you enable Verizon APN in settings on the U-firmware?
Click to expand...
Click to collapse
I did enable verizon APN setting. I only get LTE data but no network connection. Not on verizon phone service per se, I use Boom Mobile which is a verizon MVNO. I tried their APN settings as well, but it still didn't give me cell service.

Oic. You aren't the first person that has had that issue. I guess I should stop assuming that everyone using Verizon firmware is on official Verizon service lol.

CVertigo1 said:
Oic. You aren't the first person that has had that issue. I guess I should stop assuming that everyone using Verizon firmware is on official Verizon service lol.
Click to expand...
Click to collapse
but do most people solve this issue by selecting the correct APN setting?
edit: just flashed V firmwire and it got cell service to work.

matase said:
but do most people solve this issue by selecting the correct APN setting?
edit: just flashed V firmwire and it got cell service to work.
Click to expand...
Click to collapse
They do what you just did, and flash to G930V firmware.

matase said:
but do most people solve this issue by selecting the correct APN setting?
edit: just flashed V firmwire and it got cell service to work.
Click to expand...
Click to collapse
I was about to say firstly flash any 6.x version to avoid you get "stuck" , and then 7.0 Nougat... so it looks everything went flawless
I`m working out on your opposite case, could you help me over here : https://forum.xda-developers.com/showpost.php?p=71503187&postcount=81 :fingers-crossed:

Unlocked Version Firmware Galaxy S8+ XAA Version Live!!!

The Following links are for the Unlocked USA Firmware for the Samsung Galaxy S8+ (G955U ONLY) This firmware will delete all user data and remove AT&T Bloatware. I have also included a tutorial video that I found on YouTube. I am not responsible for burned, broken, blown-up or bricked devices. Flash at your on risk.
Instruction Video - https://www.youtube.com/watch?v=dAHqc3-QkPk
Odin 3.12.5 - https://www.androidfilehost.com/?fid=457095661767159695
Firmware From Unlocked US Cellular No Bloatware - https://drive.google.com/file/d/0B7rLA6mgXCYvdkVmSkNjWFNBLUE/view?usp=sharing
Canada Firmware No Bloat Full Samsung with integrated Smart Call (Caller ID for Unknown Numbers) - https://drive.google.com/file/d/0B7rLA6mgXCYvTnFramFmMTNtbWc/view?usp=sharing
APN Settings - https://apn.gishan.net/settings/1740_4_att_apn_settings_for_samsung_galaxy_s8.php
Enjoy The Freedom of no Bloat
P.S. Use NEXTGENPHONE in the APN in Place of ATT
UPDATE:
FULLY UNLOCKED USA VERSION XAA
https://drive.google.com/file/d/0B7rLA6mgXCYvU0lmZXJJQVlkQVE/view?usp=sharing
First boot is long so just wait.
Smart Call is built in and is not controllable by the user. Spam Protection is.
Use Prince's Odin for this package

BigHussle said:
The Following links are for the Unlocked USA Firmware for the Samsung Galaxy S8+ (G955U ONLY) This firmware will delete all user data and remove AT&T Bloatware. I have also included a tutorial video that I found on YouTube. I am not responsible for burned, broken, blown-up or bricked devices. Flash at your on risk.
Instruction Video - https://www.youtube.com/watch?v=dAHqc3-QkPk
Odin 3.12.5 - https://www.androidfilehost.com/?fid=457095661767159695
Firmware - https://drive.google.com/file/d/0B7rLA6mgXCYvdkVmSkNjWFNBLUE/view?usp=sharing
APN Settings - https://apn.gishan.net/settings/1740_4_att_apn_settings_for_samsung_galaxy_s8.php
Enjoy The Freedom of no Bloat
P.S. Use NEXTGENPHONE
Click to expand...
Click to collapse
Will volte still work with unlocked firmware? Samsung pay?

Shuthefrontdoor said:
Will volte still work with unlocked firmware? Samsung pay?
Click to expand...
Click to collapse
Samsung Pay Works but Wifi Calling and Video Calling Does Not

this odin writes to userdata? So it allows full carrier switch? That's huge if true

so how does this work when its time to get an ota update? do you need to flash back to att and then flash to the unlocked equivalent or can you just take unlocked ota's to update the phone?

thecrunked said:
so how does this work when its time to get an ota update? do you need to flash back to att and then flash to the unlocked equivalent or can you just take unlocked ota's to update the phone?
Click to expand...
Click to collapse
You do not have to ODIN back. It will update normally. It was pulled from a US Cellular Device which was sold unlocked. I have the Canada version also with the built in Caller ID to identify unknown numbers with the Samsung Smart Call feature. and you do not have to program the APN. Yall let me know if you want me to upload it along with instructions.

Guitarboarder28 said:
this odin writes to userdata? So it allows full carrier switch? That's huge if true
Click to expand...
Click to collapse
yep there's a slot for that

I have a Sprint S8+
Have tried flashing over it with this ROM and a Verizon ROM.
Both flash worked completely n ODIN but when the phone reboots, it is still Sprint.
I have seen other posts with same problem.
Am I doing something wrong?
I have tried both Home CSC and Non-Home CSC and the Userdata file was in UMS field in ODIN.

DESERTDART said:
I have a Sprint S8+
Have tried flashing over it with this ROM and a Verizon ROM.
Both flash worked completely n ODIN but when the phone reboots, it is still Sprint.
I have seen other posts with same problem.
Am I doing something wrong?
I have tried both Home CSC and Non-Home CSC and the Userdata file was in UMS field in ODIN.
Click to expand...
Click to collapse
I have not tried it on Sprint or Verizon I know it works on AT&T. i have ran both firmwares on My AT&T S8+ With no issues
As stated using the proper ODIN is important

BigHussle said:
I have not tried it on Sprint or Verizon I know it works on AT&T. i have ran both firmwares on My AT&T S8+ With no issues
As stated using the proper ODIN is important
Click to expand...
Click to collapse
I used the ODIN at the top of this thread.

DESERTDART said:
I used the ODIN at the top of this thread.
Click to expand...
Click to collapse
Same one I used and It worked

DESERTDART said:
I have a Sprint S8+
Have tried flashing over it with this ROM and a Verizon ROM.
Both flash worked completely n ODIN but when the phone reboots, it is still Sprint.
I have seen other posts with same problem.
Am I doing something wrong?
I have tried both Home CSC and Non-Home CSC and the Userdata file was in UMS field in ODIN.
Click to expand...
Click to collapse
I have the Verizon variant and downloaded the Canadian version, and flashed that over completely the regular CSC, not the home_CSC. This was using the prince comsey or whatever version of Odin, and I let it reboot after. During the setup I did the same thing the other guy mentioned where you only set a pin, and select yes to boot the device with your pin. Once I got through the setup I turned on dev mode, and flashed my stock FW, which was Verizon. I selected all files and chose the home_csc from the Verizon package along with the VZW AP, BL and CP files.
Flashed them all over and let the device reboot. Once it turned on it took a minute or so to get LTE and service in general but it worked.

BigHussle said:
Canada Firmware No Bloat Full Samsung with integrated Smart Call (Caller ID for Unknown Numbers) - https://drive.google.com/file/d/0B7rLA6mgXCYvTnFramFmMTNtbWc/view?usp=sharing
Enjoy The Freedom of no Bloat
P.S. Use NEXTGENPHONE in the APN in Place of ATT
Click to expand...
Click to collapse
Thanks so much for this! Just for clarification the Unlocked US Cellular version does not have Smart Call only the Canadian version does or am I reading it wrong? Just trying to figure out the difference and which one would be best for my G955U.
Thanks!

SupacatSF said:
Thanks so much for this! Just for clarification the Unlocked US Cellular version does not have Smart Call only the Canadian version does or am I reading it wrong? Just trying to figure out the difference and which one would be best for my G955U.
Thanks!
Click to expand...
Click to collapse
The Canadian one is the one with Smart Call

So this makes an att phone unlocked to any carrier?
So it makes it be just like this :
https://www.google.com/url?sa=t&sou...ko_1_KTaSMGYXh58g&sig2=S61c8u5HwgvNYsOhGPXOGA

BigHussle said:
I have not tried it on Sprint or Verizon I know it works on AT&T. i have ran both firmwares on My AT&T S8+ With no issues
As stated using the proper ODIN is important
Click to expand...
Click to collapse
Same thing happened to me. Successfully flashed but when it boots it still is an AT&T. I have the AT&T version and tried the home csc. Everything passes but it doesn't work for me. Weird

I'm on AT&T and wondering which one is better to flash. Is the only difference between us unlocked and canada firmwares the smart call feature?

SupacatSF said:
Same thing happened to me. Successfully flashed but when it boots it still is an AT&T. I have the AT&T version and tried the home csc. Everything passes but it doesn't work for me. Weird
Click to expand...
Click to collapse
Just an update but I tried the Canadian one on my device using the home.csc. Notice it does not have a UMS. It worked! The Canadian version is super clean! I am on AT&T, besides for the known things like wifi calling. Are we missing anything by not using the US Cellular version?
Thanks again, it just seems like the US cellular version wouldn't take for me but I am now happy and bloatware free.

SupacatSF said:
Thanks so much for this! Just for clarification the Unlocked US Cellular version does not have Smart Call only the Canadian version does or am I reading it wrong? Just trying to figure out the difference and which one would be best for my G955U.
Thanks!
Click to expand...
Click to collapse
They both will work the same. On the US Cellular version I think you have to program the APN and it does not have the smart call feature. The Canadian version does

X_Fact0r said:
I'm on AT&T and wondering which one is better to flash. Is the only difference between us unlocked and canada firmwares the smart call feature?
Click to expand...
Click to collapse
yes the smart call feature is the only difference is the smart call feature. there is no need to install 3rd party software to get caller Id for unknowns and it still detects spam

[REDIRECT][All US Firmware][Switch Carrier][Flash Carrier/Unlocked]SM-N950U/U1/W

Link to complete guide for flashing Unlocked Firmware, Carrier Firmware, and Carrier Switching for SM-N950U and SM-N950U1 in main guide section.
https://forum.xda-developers.com/ga...m-n950u-u1-t3685884/post74087340#post74087340
This guide also has every Firmware for the SM-N950U and SM-N950U1 devices...

BlueFox721 said:
Link to complete guide for flashing Unlocked Firmware, Carrier Firmware, and Carrier Switching for SM-N950U and SM-N950U1 in main guide section.
https://forum.xda-developers.com/ga...m-n950u-u1-t3685884/post74087340#post74087340
Click to expand...
Click to collapse
Great guide but you should mention from where you got AT&T firmware for note 8. This firmware is not that easy to get.
Writing from the Edge of Galaxy S8+

norbarb said:
Great guide but you should mention from where you got AT&T firmware for note 8. This firmware is not that easy to get.
Writing from the Edge of Galaxy S8+
Click to expand...
Click to collapse
It says still updating...but will do...I'm just not finished yet...that's why is says at the bottom to pm me and still adding thanks tomorrow...and samfirm will download the ATT files...also I did not host the ATT firmware as it is still directing to your link...if I host files I find them myself...you can also purchase a subscription to other VIP hosting sites and download the ATT firmware...I just haven't bit the bullet...and I have pointed several people to your same link....in various posts...in no way did I take credit for it...not to mention that you yourself have no mention of where you got it, unless you developed it yourself...lol....I will be hosting AT&T firmware that I get myself though...thanks for the pm...I appreciate it... I'll be sure to give you credit as "and others" in the guide...
Please if anyone feels that they should be mentioned...pm me...it takes a while to create a thread that is semi-professional and not just a single link...and I may leave things out unintentionally...a pm will allow for edits quietly and professionally...please enjoy and I do not require credit because all we are doing is sharing and contributing for the sake of enjoying our Note...

Switching Carrier SM-N950F to SM-N950U1
Dear,
So, I can switching my SM-N950F to ATT version, too?

ritasa said:
Dear,
So, I can switching my SM-N950F to ATT version, too?
Click to expand...
Click to collapse
No your phone has a different processor
Sent from my SM-N950U using Tapatalk

So has the experience been better using this rom over stock? Any improvement on battery life? Performance?

So I have a unlocked carrier Note 8. I flashed the AT&T firmware and still do not get Wi-Fi calling. VOLTE works but trying to setup Wi-Fi calling fails.

need little help
cant get odin to process the att firmware any suggestion.
coming from unlocked firmware

joshpaynee said:
cant get odin to process the att firmware any suggestion.
coming from unlocked firmware
Click to expand...
Click to collapse
I just flashed it today. What is going on?

borijess said:
I just flashed it today. What is going on?
Click to expand...
Click to collapse
for some reason its just hangs up after loading loading all files in odin when i hit start nothing happens redownloaded firmwares twice and tried both odins i know im not crazy cuz ive already done one att note to the unlocked firmware lol im just at a loss.

joshpaynee said:
for some reason its just hangs up after loading loading all files in odin when i hit start nothing happens redownloaded firmwares twice and tried both odins i know im not crazy cuz ive already done one att note to the unlocked firmware lol im just at a loss.
Click to expand...
Click to collapse
Factory reset from recovery...after reset back out to main recovery menu and select boot to bootloader...then flash using regular Odin
Recovery is Volume+ + Bixby + Power

BlueFox721 said:
Factory reset from recovery...after reset back out to main recovery menu and select boot to bootloader...then flash using regular Odin
Recovery is Volume+ + Bixby + Power
Click to expand...
Click to collapse
thanks man tried it this morning worked like a charm.

I been on the phone with AT&T trying to get my imei whitelisted. I told them it was an AT&T phone. Running stock AT&T software. If I am running this software all my updates coming from AT&T now?

borijess said:
I been on the phone with AT&T trying to get my imei whitelisted. I told them it was an AT&T phone. Running stock AT&T software. If I am running this software all my updates coming from AT&T now?
Click to expand...
Click to collapse
Someone said to add fota to apn using shortcut master lite to get OTA from ATT if you don't get OTA updates normally...but yeah if all is stock and working cohesively you should get OTA from them. If you are on unlocked and you just flashed csc and USERDATA files you may still get from Samsung...you just got ATT to whitelist the imei...
Some of the unlocked updates have came from carriers...though (it's kind of odd I looked at where my SPR SM-N950U1 came from and it was the same server that the Sprint s8+ updates came from...then I went back to just XAA and checked for the XAA SM-N950U1 and it was a Samsung server...so you may be getting ATT no matter what once your imei is rightfully registered...

All firmwares for SM-N950U and SM-N950U1 are located at link in OP....for those looking for Firmware

3CRC2 added to main

BlueFox721 said:
3CRC2 added to main
Click to expand...
Click to collapse
Is there any difference between that and the 3CRC2 posted here:
https://forum.xda-developers.com/att-galaxy-note-8/how-to/att-oreo-ota-updates-t3756025
Thanks

illusivenick said:
Is there any difference between that and the 3CRC2 posted here:
https://forum.xda-developers.com/att-galaxy-note-8/how-to/att-oreo-ota-updates-t3756025
Thanks
Click to expand...
Click to collapse
Not sure, I haven't looked....
My zips include BL, AP, CP, CSC, HOME_CSC, and USERDATA...
This one is ATT...
It is compressed individually...and includes a note to use new Odin

So I just flashed the latest att firmware on my Verizon note 8 and just trying to get volte and wifi calling to work but no luck. I've read the combanation file is need to "carrier switch" but none of the combanation files seem like they go with the latest pie firmware? And help and or pointing in the right direction would be greatly appreciated

My Note 8 was purchased from ATT, then I unlocked it using a service, then I switched to T Mobile years later. When I switched to T Mobile, the firmware updated itself to T Mobile after I booted with a T Mobile SIM.
Now, I am trying to flash it to U1_XAA so that I can gift it to someone in China. However, after factory resets, even from the recovery menu, it fails almost immediately during flashing. Would you please guide me on how to get this flashed to U1_XAA? Or is it ok just to leave it the way it is (U_TMB) and send it out?
Thank you!
P.S. this is with Android Pie, since I got the update while I was still on ATT. I tried flashing with the patched Odin as well, same thing...

[G930T] Official Stock Firmware Android 8 OREO (G930TUVU4CRF1)

Here is Stock Oreo directly from Samsung for the T-Mobile Samsung Galaxy S7 via Odin.
AP_G930TUVU4CRF1_CL13718910_QB18653810_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G930TUVU4CRF1_CL13718910_QB18653810_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930TUVU4CRF1_CP9980724_CL13718910_QB18653810_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_TMB_G930TTMB4CRF1_CL13718910_QB18653810_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_TMB_G930TTMB4CRF1_CL13718910_QB18653810_REV02_user_low_ship_MULTI_CERT.tar.md5
Link: https://drive.google.com/open?id=18q9f9VNkUHD6-YaSc1UVoXUchTvP5qJf
Don't forget to factory reset and clear the caches via Recovery after you flash.
Enjoy!

Can I flash this onto my G930A?

is it necessary to factory reset??? Something that I've always liked about samsung is that I update using Odin and the apps and confs still the same... but if I have to factory reset, then I will lost everything...

luis901101 said:
is it necessary to factory reset??? Something that I've always liked about samsung is that I update using Odin and the apps and confs still the same... but if I have to factory reset, then I will lost everything...
Click to expand...
Click to collapse
All Samsung's have multiple ways of backing up and restoring. All you have to do is back up using Samsung cloud and when you start your phone it will ask you if you want to restore your phone and then everything will automatically come back to your phone. Factory reset fixes boot loop and other issues

Christopher97 said:
Can I flash this onto my G930A?
Click to expand...
Click to collapse
I have an unlocked phone, I'm not sure how atnt works with other Sims or with their phones. I previously had atnt firmware but then switched to TMobile since I have TMobile sim

aarongotgame said:
I have an unlocked phone, I'm not sure how atnt works with other Sims or with their phones. I previously had atnt firmware but then switched to TMobile since I have TMobile sim
Click to expand...
Click to collapse
Yeah I went ahead and flashed it. Works fine, better signal than on the ATT software and all features work

Christopher97 said:
Yeah I went ahead and flashed it. Works fine, better signal than on the ATT software and all features work
Click to expand...
Click to collapse
Great, I also found my signal to be better as far as staying connected is concerned. At one point my data kept going out on the atnt firmware and I had to keep restarting the phone or mess with the Wi-Fi calling. I haven't had any problems since I flashed this and plus 8 is faster than 7 so I'm excited to not have to mess with this phone anymore and just leave it up to ota updates.

when root for sm g930t oreo be released?

abdessamed10 said:
when root for sm g930t oreo be released?
Click to expand...
Click to collapse
Haha, good one

I can't use SIM card after upgrade, it said that "not registered on network", I tried many ways on internet but I didn't work. Please help me

Ying Yoh said:
I can't use SIM card after upgrade, it said that "not registered on network", I tried many ways on internet but I didn't work. Please help me
Click to expand...
Click to collapse
Which sim card do you have and which carrier provides the phone because then you might have to flash back to 7 and use your carriers official firmware or flash your carriers official 8 firmware.

I have a SM-G930U. I wasn't expecting this to work...and it did flawlessly. Another surprise I got was flashing this firmware fixed my dm-verity issues. Thanks a lot for this thread. It gave a new life to a phone gathering dust on a shelf.

DragonFire1024 said:
I have a SM-G930U. I wasn't expecting this to work...and it did flawlessly. Another surprise I got was flashing this firmware fixed my dm-verity issues. Thanks a lot for this thread. It gave a new life to a phone gathering dust on a shelf.
Click to expand...
Click to collapse
With that said...any root method yet?
Sent from my KFSUWI using XDA Labs

DragonFire1024 said:
With that said...any root method yet?
Sent from my KFSUWI using XDA Labs
Click to expand...
Click to collapse
OEM unlock is an option in Developer Options. Has that always been there?

thedodecahydra said:
OEM unlock is an option in Developer Options. Has that always been there?
Click to expand...
Click to collapse
It's there but it doesn't work. It's just a toggle button that would come with most Android builds for the phones that actually have unlocked bootloader.

aarongotgame said:
It's there but it doesn't work. It's just a toggle button that would come with most Android builds for the phones that actually have unlocked bootloader.
Click to expand...
Click to collapse
Still doesn't answer my question lol...root possible yet? Tried the nougat eng root to no avail.
Sent from my KFSUWI using XDA Labs

DragonFire1024 said:
Still doesn't answer my question lol...root possible yet? Tried the nougat eng root to no avail.
Sent from my KFSUWI using XDA Labs
Click to expand...
Click to collapse
All questions have been answered in the thread.

aarongotgame said:
Haha, good one
Click to expand...
Click to collapse
If there was root before (there is), then I'm pretty sure it will soon be available for Oreo too. I don't see why there wouldn't be unless those individuals who created or found the engineering kernel for MM AND N, aren't around to help out again. If not, back to 6.0 it goes.

HI, Now I'm on a custom rom with Nougat. Sim's carrier is Orange(UE). If I flash this Official Oreo version the phone will become Locked, right? Any idea how to unlock it, no charges? Thanks!

Thanks for the upload. I was trying to see if SamMobile had this up yet but they did not have it up when I checked. I have the MetroPCS variant and it did have 8.0 available on SamMobile already. I am switching from MetroPCS to T-Mobile so this will be perfect to get my phone 100% ready.