Hi,
I broke my LCD display a couple of months ago still, I managed to use the phone with the epaper display and eventually reinstall it without clearly writing down the exact procedure (with Lolipop)
Today, as my Marshmallow update freezed, I had to wipe all, thinking well I could easily find the steps to start the phone again.
The only problem remains that Setup Wizard wants us to use the LCD display, and I can't.
The last time I managed to use screen mirroring on Windows, with androidscreencast-0_3_1.jnlp, which is dicontinued.
To that extend, I allowed USB debugging (three lines to add) on system/build.prop and default.prop and copied a file from my computer (adbkeys.pub) to a certain folder in the device, to allow my PC to operate on the cellphone
But that last step doesn't work anymore.
I can see a dialog briefly popping up on the yotaphone, prompting me to allow the computer for debugging, but I can't click.
Droid Explorer tells me that this yotaphone is not allowed in $Vendor (or so on, I can't remember well).
So I managed to authorize the screen mirroring before, to start the phone, but I can't right now, although I found a new app, androidscreencast-0.0.10s-executable.jar.
I would have to copy adbkeys.pub to data/misc/adb/adb_keys, but as of today, that directory doesn't exist.
Can somebody please help me with that?
Thanks,
Hi,
I solved a similar situation by plugging a mouse to the phone using a usb to micro USB adapter (also called USB OTG adapter).
wicoz said:
Hi,
I solved a similar situation by plugging a mouse to the phone using a usb to micro USB adapter (also called USB OTG adapter).
Click to expand...
Click to collapse
Thank you for answering. And what do it do to plug a mouse?
I've made it : the phone starts again.
If anyone is interested, I'll tell the trick for a broken front screen like mine.
Now I'm looking forward to make an image backup of it as it is very fresh if it can save me or others !
And I need advices for that?
Hi!!!
I have the sale problem
How did you bypass the wizzard???
hi. how do you bypass setup wizard? i had mine reset due to stuck. before im using only back screen. please help!
My front screen also stopped working all of a sudden without me doing anything. I was able to use the eInk so I did a factory reset. Now however I'm stuck since I can't boot the phone without a working front screen. I was wondering if a software issue stops the front screen from working and if there is a way to check/fix it.
Related
Hello everyone
I've got a problem and I need your help. My Legend fell on the ground and now the glass and display are both broken. To access my device with adb, which I previously installed, I used DroidAtScreen. But recently I deactivated USB-Debugging eek, and now I can't enable it. I need to "recreate" every single step from the unlocked screen to Menu->Settings->Applications->Development->USB-Debugging. The first step (Menu->Settings) is easy and abvious, but I need the other ones.
Could some of you take some screenshots and upload them? I.e.:
1. Menu->Settings, then scroll down to bottom **Screenshot**
2. Scroll a little bit up until "Applications" reaches first entry **Screenshot**
3. Press first entry (=Applications) **Screenshot**
4. Press fourth entry (=Development) **Screenshot**
5. Press first entry (=USB-Debugging) *Screenshot**..
I know it may seem complicated, but it would be of tremendous help! My idea is to print out the images and lay them over the Legend to find my way to USB-Debugging
THANK YOU A LOT in advance!
memo9
Good thinking, you actually only need 4 screens, here you go...
Good luck replacing the screen! There's plently of material to work with in accesories section
If the digitiser (top glass) is broken i doubt your presses will be in the right place, I have a desire in front of me that has a crack in the top left corner of the digi and pressing "a" on the keyboard pull notification bar down
Thank you very much for the effort of taking the screenshots, but I couldn't access the settings.
The only question that remains is: Does the phone need to be in "charge only"-mode? Because right now, in fact I can access the SD-Card when mounted, so I may have to switch to charge only?
@bonesy: Thank you for the input, but the touchscreen seems to be working fine as I can turn on the phone and enter the PIN-code to unlock it, as well as call a number after opening the phone-application
ADB should work no matter what the mode...why weren't you able to access it?
I don't know... I followed all the steps, connected the phone to my Mac... all this several times, trying to press on the exact location... but haven't succeeded.
I have adb configured as well as DroidAtScreen running and also tried to access it with DDMS..., but when i use the command "adb devices" none is shown. I can access my SD-Card but can't use adb...
I may try again a few times but can't really think of any other alternative than to replace the screen, although I need to access my phone immediately.
Thanks again for all the fast answers and if anyone has an idea or some sort of walkthrough... I would appreciate it.
ADB wont work unless you are using a custom rom OR its selected already.
Maybe a USB port failure?
What do you mean? I have accessed my phone in this environment several times before, everything should be set up correctly. It may be a USB port failure, altough I have tried to plug it into other USB ports.
The only thing I'm struggling with right now is accessing the Debug-mode in the settings.
memo9 said:
What do you mean? I have accessed my phone in this environment several times before, everything should be set up correctly. It may be a USB port failure, altough I have tried to plug it into other USB ports.
The only thing I'm struggling with right now is accessing the Debug-mode in the settings.
Click to expand...
Click to collapse
Ah i see, i meant the phones usb port... Could be 1 pin failed on it stopping certain things working?
Doesn't seem to be the problem since I can mount the phone and access the SD-card, but thanks anyway.
LGD800 AT&T
Just dropped it and the phone is malfunction.
a. the screen is shatter and touch isn't work.
b. usb port doesn't seem to work either.
Main problem now is that I have lockscreen with PIN on, since touchscreen isn't working I can't access it to turn on On-Screen feature.
USB port doesn't work, I think I can use wireless but again, can't get pass the lockscreen.
I have tried remote Unlock from AVG app which I currently has it running on the phone but still cannot get pass the screen.
I want to copy a few important files over first then perform Factory Reset via Recovery.
Does anyway I can do that?
All feedback and thought welcomed.
Also, since I got this phone for 4 months, i believe warranty is over. Anyone know which reliable, good service that I can send my phone for the screen fix?
Thanks all
Since the usb doesn't work so I don't think ADB pull will help, plus I have to turn on the USB Debugging anyway, which I can't now.
Got it.
Case closed.
Hi,
I just cracked the upper left corner of my Wileyfox Storm. there's a burst from the top to he bottom of my phone which resulted in an error of the touchscreen, it's not working at all. I tried to connect my phone via USB cblae to my computer so I can restore my files to de PC but it's not connecting at all...:crying:
At first I had the usual scren to enter my PIN code for my Simcard, but now it is gettin ON/OFF constantly (probably untill the battery dies).
Any one who can help me to restore my files ?
I was in same situation. Answer: You cant get files unless you replace your screen.. BUT if You decide to replace screen, You wont find replacements on the web to buy them, and You will have to send phone to Wileyfox, the'll say that it's no longer supported, or if they will fix it, it will be wiped completely.
After braking stom i bought N5 and im happy as hell
If you open the phone it is possible to disconnect the touch panel and get the phone to start. With a USB otg connector you can navigate with a mouse. With a USB hub you can also connect a pc (mouse required to enable file transfer) at the same time or you can transfer the files via WiFi / Bluetooth (sloooow)
Sent from my XT1580 Hammer using Tapatalk
Hi, Today I dropped my phone and the screen is gone. the phone inside is still alive. I need to mirror the screen onto my computer so that I can sort some things out on it. Is this possible without put a client onto the phone? It is rooted.
Thanks.
S
you can do it with a microusb to hdmi cable, no actions required - but your touchscreen must be operative, otherwise you can do nothing. If you want to recover files simply connect device to a pc
Hehy there,
unfortunately the screen on my mi9t stopped displaying. Really weird. While I was using it, the screen started flashing, just to turn black and never wake up again. No fall or water involved. The phone still seems to work fine, and even touch seems to work, but no display.
I opened up the phone to see if the connector got loose, but everything is well in place.
Now my problem ist, that I can not access the phone anymore. All my files and things are still on there but unreachable.
Here are the facts:
- no display
- bootloader is locked
- usb debugging is enabled, but my pc is not authorized
- I can blindly get into fastboot and to the lockscreen
- I am not able to blindly unlock the device
Easiest option would obvoulsy be to exchange the display, but unfortunately I can not get on here (South Africa) and shipping would take a month.
My favourite aproach so far was to mirror the screen via Vizor, but unfortunately it needs to install the according app on the device, which it can not while the device is locked.
Does someone here know how to recover the data?
Thanks
and a happy new year to everyone!
cartonneexpress said:
Hehy there,
unfortunately the screen on my mi9t stopped displaying. Really weird. While I was using it, the screen started flashing, just to turn black and never wake up again. No fall or water involved. The phone still seems to work fine, and even touch seems to work, but no display.
I opened up the phone to see if the connector got loose, but everything is well in place.
Now my problem ist, that I can not access the phone anymore. All my files and things are still on there but unreachable.
Here are the facts:
- no display
- bootloader is locked
- usb debugging is enabled, but my pc is not authorized
- I can blindly get into fastboot and to the lockscreen
- I am not able to blindly unlock the device
Easiest option would obvoulsy be to exchange the display, but unfortunately I can not get on here (South Africa) and shipping would take a month.
My favourite aproach so far was to mirror the screen via Vizor, but unfortunately it needs to install the according app on the device, which it can not while the device is locked.
Does someone here know how to recover the data?
Thanks
and a happy new year to everyone!
Click to expand...
Click to collapse
When I experimented, I was able to unlock my two SIM cards and Android by adb (replace xxxx by your PINs)
However, phone was rooted and shell was given the root grant:
adb wait-for-device devices
adb shell
su
input text xxxx
input keyevent 66
input text xxxx
input keyevent 66
input touchscreen swipe 930 880 930 380
input text xxxx
exit
exit
try fastboot apk
Mirror screen to pc with vyzor. You have usb debugging turned on, so it's worth a try.
If touch doesn't work, use usb otg adapter to plug keyboard or mouse
There's no other option.
zgfg said:
...
Click to expand...
Click to collapse
Thank your for the idea! Unfortunately it does not work in the unrooted phone. I suspect that's only because I can't the adb connection to my pv authorized.
I tried this on an unrooted lineage os 17, which I have on my old Mix2, and there it works like a charm.
yaro666 said:
try fastboot apk
Mirror screen to pc with vyzor. You have usb debugging turned on, so it's worth a try.
If touch doesn't work, use usb otg adapter to plug keyboard or mouse
There's no other option.
Click to expand...
Click to collapse
Thanks for the advice. I think i tried everything to get the apk installed, but I can not do anything through adb since even though debugging is activated, the connection to my pc is not authorized.
I guess I have to wait for the replacement screen.
cartonneexpress said:
I guess I have to wait for the replacement screen.
Click to expand...
Click to collapse
Any water exposure? Ever?
May not be the screen; a mobo failure is just as likely even more so especially if they use no lead solder paste.
Maybe a loose or bad connector/cable if you get real lucky... and find it.