Hi, there, my phone is recognized by PC and i can enter to 9008 mode (EDL) with deep flash cable and button combination but when install the original firmware (I tried 2.3 and 2.5 QPST versions), the phone restarts and back to HS-USB Diagnostics 900E mode with blue led notification and black screen, before brick i have install MOKEE and all works perfect but one day i go out of battery and this happen....
Do you have any idea how fix this??? I tried searching on lenovo forums but, i am not very good at chinese.
Please!!!!
Related
Hi there,
Well, I am a samsung s4 i9506 owner. This weekend, I actually hard brick my phone and now it doesn't respond. It doesn't even start, No screen flash, No led flash. When I try to connect it to PC, it says Windows cannot recognize this device. However, I figured it out how to connect my phone to pc, its by holding the power button for one minute and then plug in the usb cable, which is connected to the pc on the other end. Now it shows, RELINK HS-USB QDLoader 9008 (Com 6). I tried everything whichever I could found after google search but nothing pls help
I think the people in the below thread have the same problem.
http://forum.xda-developers.com/galaxy-s4/help/samsung-s4-fullbrick-t3284237
Hi,
My phone got bricked while installing and update. The phone i hard bricked it shows no signs of life and does not go to Download or recovery mode. Not by button combination or USB Jig.
When I connect the phone to the laptop it shows qualcomm hs-usb qdloader 9008. Is there any way to rescue the phone and debrick it?
Thanks :crying:
Come on people there should be a solution to this crap
hi
pls help me
firstly i have cool1 c103
yesterday i flash jui rom my cool 1 work good
but no turkish language
than flash twpr work good than
flash couco 26 v5 version from twpr
than restart no open
Qualcomm HS-USB Diagnostics 900E
plug in cable work vibration long time
also bling red light
pls help me
musakilic said:
hi
pls help me
firstly i have cool1 c103
yesterday i flash jui rom my cool 1 work good
but no turkish language
than flash twpr work good than
flash couco 26 v5 version from twpr
than restart no open
Qualcomm HS-USB Diagnostics 900E
plug in cable work vibration long time
also bling red light
pls help me
Click to expand...
Click to collapse
Hello! Open control panel, device list, then connect your phone to the PC via USB and press power, volume + and - at the same time and hold 'em until your phone reconnect with the 9008 mode.
i have the solution.
txt me at - [email protected]
Hi, I have (or used to) the GSI Android P Rom on my A1, I saw that an update was avalible for it on the official Telegram group so I decided to download and install it, I wiped vendor as it said and flash the zip files, but I forgot to flash the vendor image again, I rebooted and now the screen is completely black, the phone is dead, the led is not making anything aswell, not even blinking, I'm trying to reboot into fastboot or TWRP with the volume keys but doesn't make anything, I tried to connect it to the PC and it recognizes it as Qualcomm HS-USB Diagnostics 900E (COM10).
I don't know what to do, I'm so worried about this, any idea?
Try to flash stock rom via miflash
If it says Qualcomm HS-USB Diagnostics 900E its not even dead. Lol
What to do next? Stop panicking & use that thing on top of your neck. It'll be fine. (& Use search button in xda, everything is here?)
https://forum.xda-developers.com/mi-a1/help/bricked-mi-a1-qualcom-hs-usb-t3784681
.:Addicted:. said:
If it says Qualcomm HS-USB Diagnostics 900E its not even dead. Lol
What to do next? Stop panicking & use that thing on top of your neck. It'll be fine. (& Use search button in xda, everything is here)
Click to expand...
Click to collapse
Hi, what if now the PC recognize it as an unknown device?
Before your reply I tried to use Qualcomm emmc studio to fix it because MiFlash wasn't recognizing it, Qualcomm did, so I tried to flash the stock ROM but it gave me an error (something about couldn't found ram), I disconected it and it appeared as an unkown device, now not even Qualcomm can recognize the phone, help
Use edl method and you should be good
So my Nokia 6.1 (TA-1045) randomly bricked and now the phone does not boot up at all. No screen, no sounds, no charging noise.
When I plug it into my Windows PC, the PC does recognize that it is plugged in. However it shows up as "Qualcomm HS-USB QDLoader 9008".
The best resource I could find with a similar issue was this thread, but for the LG 70+ devices. Is there any way for me to fix my bricked phone? Or am i out of luck?
abc617 said:
So my Nokia 6.1 (TA-1045) randomly bricked and now the phone does not boot up at all. No screen, no sounds, no charging noise.
When I plug it into my Windows PC, the PC does recognize that it is plugged in. However it shows up as "Qualcomm HS-USB QDLoader 9008".
The best resource I could find with a similar issue was this thread, but for the LG 70+ devices. Is there any way for me to fix my bricked phone? Or am i out of luck?
Click to expand...
Click to collapse
So if it's showing as qc 9008 mode than it's a good sign.. it means it's going to edl mode.
What you need to do is find a qfil flashable firmware (just google) and flash it on your device through qfil flash software.