I installed customized ROM Resurrection Remix. But after installing finger print option disappeared from settings. I tried with lineage OS also but no use. Also tried with mm firmware but no success. So please let me know if anyone knows about this issue.
I am using lenovo zuk z1
Thanks in advance
Did you go from cm12 to RR based on nougat?
If so try flashing cos then nuclearrom then zui then RR again, might solve the problem with it not being detected at least that's what they said in another thread... Remember to wipe and stuff, there are more threads about it. GL
Related
Hello!
Every custom rom I try to use in my redmi 2 pro 2014819 (prime in USA, pro in Brazil) shows random restarts, usually when the screen is off.
I have tried to use different bootloaders (miui KK and miui LP), different versions of TWRP (2.8.7.2 and 3.0.2.0), remove the sd card, different ways to flash, change the Linux from permissive to enforcing, disable the kernel panic , Different roms (the only one that did not restart in 4 days was CrDroid 4.4.4); And all led to random restarts.
I have already tested RR mm, RR N, Cyanogenmod, LineageOS, TeslaN, Tesla MM, AOSP Extended, Dirty Unicorns, AOSIP, Mokee 6, Mokee 7.1, among others, and unfortunately all presented the same problem.
I would be very grateful if anyone could help me; I believe that the problem is not in the process of flashing, but everything is possible.
Thanks in advance!
Did u try miui lolypop firmware provided on Lineage os thread?
Post ur problem with Model name,Logcat and Dmseg on ROM thread.
raymond_bqg said:
Did u try miui lolypop firmware provided on Lineage os thread?
Post ur problem with Model name,Logcat and Dmseg on ROM thread.
Click to expand...
Click to collapse
I tried to flash, but reboots continued to occur; The only change that occurred was that I could not get into twrp anymore, I will restore via fastboot and reinstall. Not put in the roms thread as it happens with all, and I believe it to be some problem on the device chip, twrp or something.
You should try the Jerrica Cosmos Kernel on RR or Mokee Rom.
I have tried almost all the lineage 7.0.1 based ROM except nuclear ROM and zui 2.5 and had faced some issues like can't select the default calling SIM...
I have a question, on nuclear ROM installing instruction there is a point, u have to come from cm 13... As I had cm 12.1 stock ROM, I didn't try that...
Please tell me, are all the nougat ROM need this condition? Or only that rom?
And also tell me, which gapps is best...
I'm using super just to have the inbuilt pixel launcher and dialler but having Google camera issue... I had tried aroma before just to choose what I need and what I don't... But it didn't work on recovery...
And should I try zui 2.5... Is it good means can call with both the SIM?
hello friends,
I am using custom rom in which my fingerprint working fine for some days but suddenly some day it disappeared .Unable to found fingerprint option anywhere in my zuk z1 device.I tried clearing credentials and unmarking android device manager etc and tried flashing with another customer roms still no solution at all. I am using lineage os 7.1.2 custom rom currently .if anyone have solution please help me in this.
thank you .
srk2521 said:
hello friends,
I am using custom rom in which my fingerprint working fine for some days but suddenly some day it disappeared .Unable to found fingerprint option anywhere in my zuk z1 device.I tried clearing credentials and unmarking android device manager etc and tried flashing with another customer roms still no solution at all. I am using lineage os 7.1.2 custom rom currently .if anyone have solution please help me in this.
thank you .
Click to expand...
Click to collapse
One possible solution is to flash zui 2.5. If that won't work a hardware fault can be the nearest problem as your problem is known and leads to that.
thanks strongst sir,I tried flashing zui and i am getting add fingerprint option but while doing fingerprint clicks for setting fingerprint lock my sensor not detecting my finger clicks.So i think it might be hardware problem .
srk2521 said:
thanks strongst sir,I tried flashing zui and i am getting add fingerprint option but while doing fingerprint clicks for setting fingerprint lock my sensor not detecting my finger clicks.So i think it might be hardware problem .
Click to expand...
Click to collapse
As I mentioned, the faulty fp hardware a widely known problem of the zuk z1
I am running resurrection remix v5.8.4 android version 7.1.2 on my j5 2016. Since the camera quality of this rom's camera app is completely trash i considered flashing the stock samsung camera app. My question is: is this possible or will i get in trouble and by that i mean boot loops or incompatibility problems. Is it safe to do so?
Hey there I faced the same problem I tried installing stock camera apps but didn't worked then I found an update resurrection remix v5.8.5 in which all the issues r being resolved and my camera is working fine and also the flash light issue .but the only problem of all the resurrection remix is that it don't support volte. If u like to flash the update I would like to share the link of the new update of it .
mjhonny14377 said:
Hey there I faced the same problem I tried installing stock camera apps but didn't worked then I found an update resurrection remix v5.8.5 in which all the issues r being resolved and my camera is working fine and also the flash light issue .but the only problem of all the resurrection remix is that it don't support volte. If u like to flash the update I would like to share the link of the new update of it .
Click to expand...
Click to collapse
I would be really grateful
Here is the link download it and flash it via recovery don't forget g apps u need gapps
https://androidfilehost.com/?fid=889964283620753628
Hope u will like it
Thanks bro !
Recently i'm facing no sound in call from other side in every rom expect arrow os, tried with flashin nxp still no solution.
Always did clean flash and have latest firmware. Never tried sound mods.
Can't hear anything neither anyone from another side
tried flashing nxp didn't worked.
Now i'm stucked in arrowos and can't even update rom. Any solution?
Flash dolby plus,it should fixed
DinIslamJoy said:
Recently i'm facing no sound in call from other side in every rom expect arrow os, tried with flashin nxp still no solution.
Always did clean flash and have latest firmware. Never tried sound mods.
Can't hear anything neither anyone from another side
tried flashing nxp didn't worked.
Now i'm stucked in arrowos and can't even update rom. Any solution?
Click to expand...
Click to collapse
Just download and flash permissive zip in magisk manager
jesh1 said:
Just download and flash permissive zip in magisk manager
Click to expand...
Click to collapse
not working. disabled, switched did all things possible, now using another rom which have premissive selinux by defaulf
Have you solved the problem? I also have the same problem
I unlocked the bootloader 2 weeks back. I have tried havoc os 2.9 3.3 rr pie lineage 17.1 miui by rinku, op5 port etc. I took backup all most every rom. I think I also made a couple of calls(call was working on havoc 2.9 previously). Yesterday while I was on havoc 2.9, I received a call. I attended the call. I was not able to hear any thing from the other side. The other side was unable to hear anything. Same with speaker also. Then reinstall (fresh install, restoring backup fresh install with gapps also) havoc 2.9, 3.3, rr pie, lineage 17.1. but same result. But no problem with miui. And no problem with superior OS Q. I have searched xda and found certain foxes for gsi's and dolby patch for oreo. But my problem is not with gsi or oreo rom. Does anybody have the same problem. Any solutions?