Encryption Unsuccessful, Reset done and started to be in loop with Logo Yu - YU Yureka Q&A, Help & Troubleshooting

Hi all,
I was pretty happy with the Cyanogen OS, but when issues started with only OS and not with hardware for more than 3-4 times,
I am not happy now, My latest issue...
One fine day I saw a Message on My Yu Yureka Plus with regional language Hindi which was looking like an advertisement on my Device, I just ignored for 1st time and 2nd time, but it was something written like encryption unsuccessful,
it prompted me to reset the phone and I did it.
After resetting the device, it just showed reboot system now and that's it, only Yu logo and restart.
Tried to flash the device but system not detecting the device.
Taken to Service center and they said that Mobile is rooted and not able to flash the device.
So now I can see the Cyanogen recovery and the charging % ....
Tried to upadate the device with official COS12.1 (YOG4PAS3JM), but failed.
My device is not rooted yet.
Anything that I can do regarding this?
Rajesh.TR

Related

Yu yureka bootloop

Hi friends,
I rooted my yu yureka two days ago. It was working fine and i was still on cyanogen os 12.1 .
I used this thread to root and install cwm recovery.
http://forum.xda-developers.com/yureka/development/tool-one-toolbox-yu-yureka-t3087186
Yesterday I restarted the phone (first reboot since rooting) it powered off and then the yu logo came on screen.
The device vibrates and it is stuck on logo. The logo remains as it is and the notification led is turned red for some time then it is gone.
The vibration is continuous and it would probably not stop till battery gets exhausted. I did not wait that long because i feared permanent damage to the hardware.
I am not able to access recovery. But i am able to get into fastboot mode.
What to do now to restore the device to normal operating conditions?
Is my device bricked?
Note : my device is on official cyanogen version 12.1 all software is original and after rooting i installed only greenify app.
Flash cm12.1 by fastboot method.

Encryption stopped working

Hi all, I need some help.
I tried to install the official CyanogenMod 13 Snapshot (2016-04-18) for my ZUK Z1. First everything went fine but after the first reboot the device ended up in a boot loop. For several hours I tried to fix this for no avail, flashing different versions of CM13, formatting the device and setting everything up again until I gave up and flashed the original CyanogenOS 12.1 from here. Now the device works again however when I want to encrypt my device through the security settings the following happens:
First I see the green Android robot, then the animated CyanogenOS logo and after a few seconds the device has booted again but no encryption was performed. I also made sure to flash the original recovery back onto my device. The only thing that has changed to before is that the bootloader is now unlocked. Could this be a problem? How can I now encrypt my device?
Thanks for any help!
Well, I locked the bootloader and it's still not working

Lenovo A6000 dead after an attempt to flash a ROM

I flashed Resurrection Remix a month ago in my 1GB ram variant, and everything was fine until, one day, when I was operating camera in my phone, the phone blacked out, and restarted, and when the screen showed pattern to unlock, and any attempt to unlock the phone would lead to immediate restart, and then after 4-5 attempts, the phone started to restart in frequent short intervals only showing android logo on the screen.
I decided to flash ROM again but this time stock ROM, but this phone has a great history of not entering into recovery mode no matter what I do. It enters only on its will. So, somehow I again flashed TWRP, and then tried flashing stock rom with QPST tool, but, when flashing finished, the phone as usually restarted, but only again to be stuck in boot loop. I again tried to flash it. But this time, after the full installation, the phone became dead. No matter what I do, the phone doesnt even turn on. No vibration, no lighting of screen, and even its not detecting on connecting to the PC.
What could be the problem? Anything related to hardware? Please help.
I suggest you to bring the phone to the service center
vaddadi9953 said:
I flashed Resurrection Remix a month ago in my 1GB ram variant, and everything was fine until, one day, when I was operating camera in my phone, the phone blacked out, and restarted, and when the screen showed pattern to unlock, and any attempt to unlock the phone would lead to immediate restart, and then after 4-5 attempts, the phone started to restart in frequent short intervals only showing android logo on the screen.
I decided to flash ROM again but this time stock ROM, but this phone has a great history of not entering into recovery mode no matter what I do. It enters only on its will. So, somehow I again flashed TWRP, and then tried flashing stock rom with QPST tool, but, when flashing finished, the phone as usually restarted, but only again to be stuck in boot loop. I again tried to flash it. But this time, after the full installation, the phone became dead. No matter what I do, the phone doesnt even turn on. No vibration, no lighting of screen, and even its not detecting on connecting to the PC.
What could be the problem? Anything related to hardware? Please help.
Click to expand...
Click to collapse
I think its hard bricked
https://forum.xda-developers.com/lenovo-a6000/how-to/guide-hard-brick-lenovo-a6000-t3581892
Use this

LG G2 D801 Bootloop after flash/reboot

Hello,
I'm currently experiencing a bootloop on my phone, it gets to the resurrection remix logo screen during boot then restarts. I've tried booting into recovery and download mode. When I try to boot into recovery it loads the factory reset screen as usual but when I say yes to the reset in order to launch TWRP it just goes to the LG logo, then remix and restarts all over. I got into download mode one time since this started but since then I've made countless attempts to boot into it again and can't.
What I was doing right before this happened is, I recently completely wiped my phone, flashed stock firmware, wiped, then installed resurrection remix. Everything was going perfect, it started no problem, I went through and cleaned up some apps I didn't want etc normal setup steps then I used the power menu to boot into recovery instead of just using the hardware keys and the bootloop started.
Besides the not booting, the other major issue here is that it never stays connected to the pc via adb long enough to do any actions or flash a single file. By the time the pc sees it and adb sees it, I have roughly 2 seconds before it restarts again.
I really really really need any help I can get please ASAP as this is my mom's phone and she needs it for work in 4 hours. This issue started about four hours ago and I've been trying to fix it ever since. I feel like I have looked everywhere on here and through google but probably missed the solution. Before you ask, I'm 28 not a teenager and work in IT as a career for the last 12 years so don't get the wrong impression. She asked me to work on it because I had set it up a few months back with a lollipop version of resurrection remix and magisk, but in the last month or so she was having really poor performance and issues with settings crashing and a few other apps.
I hope you don't need any more info from me, if you do however I'll be here trying to fix it until she goes to work at least. I really could use the help and would greatly appreciate it.
Thank You

Restart Problem

Hi guys,
Few days ago I tried to reflash the stock rom (8.0 & 9.0) but the phone got into bootloop.
Since then I tried everything and nothing helped it was booting upto the point that there's Android One logo and as I said it would bootloop, I don't know how but yestetday I managed somehow to get the phone to boot up but while I'm in setup the phone restarts over over, sometimes it's restsrting when I'm entering my name and sometimes in any other section (depends on the speed that I'm doing the setup...
Any ideas how to fix this issue ?

Categories

Resources