Database Users

[INFO] How to sideload 5.1.1 (LYZ28E), & maintain no encryption - no wipe required

[INFO] How to sideload 5.1.1 (LYZ28E), & maintain no encryption - no wipe required
Simplified procedures with LMY47M / LYZ28E now available as a factory image.
Hopefully this isn't blatantly obvious to everyone, it is a little different than the normal sideload procedure. Thought it might be useful to some who want to load 5.1.1 (and get Wifi calling with T-Mobile!) and not be forced to encrypt.
Requirements:
1. I'm assuming you have adb/fastboot working on your computer / connecting to your device and you understand a little bit about using adb / fastboot with an android phone.
2. Your phone cannot be encrypted, if you're encrypted already - this will not un-encrypt your data - you need to turn off forced encryption and format the "userdata" partition to disable the encryption.
3. You need to have an unlocked bootloader for this to work of course.
How to follow this procedure:
1. If you're on LMY47M (T-Mobile) and unencrypted, you can follow option 2, starting with Step 3 - only a small ~150MB download required.
2. If you're on anything other than LMY47M, you should use option 1 unless you have a desire to flash LMY47M and sideload LYZ28E.
I didn't do much here - except spent a bunch of time writing the procedure.
All Credit for tools / ideas goes to:
- efrant for his explanation of how to get OTA updates to work with TWRP ( http://forum.xda-developers.com/nexus-6/general/nexus-6-ota-help-desk-t2992919/page4 )
- hlxanthus for the NO FORCE ENCRYPT mod ( http://forum.xda-developers.com/nexus-6/development/mod-disable-force-encryption-rom-kernel-t3000788 )
- Q9Nap and mhous33 for the LMY47M factory image ( http://forum.xda-developers.com/nexus-6/development/fxz-nexus-6-recovery-flashable-fastboot-t3066052 )
- bbedward and others for the original disable forced encryption boot.img ( http://forum.xda-developers.com/nexus-6/development/disable-forced-encryption-gain-root-t2946715 )
- TeamWin - the TWRP Developer ( https://twrp.me/ )
——————————————————————————————————
OPTION 1 - Easy Method - Flash the LYZ28E factory image directly:
1. Download hlxanthus's NO FORCE ENCRYPT mod and put it onto your phone so you can flash it later (in /storage/sdcard0) - https://basketbuild.com/filedl/devs...u/misc/NO_FORCE_ENCRYPT_shamu_v1.0-signed.zip
2. Download LYZ28E for Nexus 6 ( https://dl.google.com/dl/android/aosp/shamu-lyz28e-factory-b542b88a.tgz ) and extract the files, there is a zip file you want to extract that too.
Boot to the bootloader ("adb reboot bootloader") and fastboot flash the boot, cache, recovery, radio and system:
Code:
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img (OPTIONAL - If you have TWRP or another alternative recovery you can skip this step)
fastboot flash radio radio-shamu-<variable>.img
fastboot flash system system.img
3. Restart the Bootloader, and flash TWRP, found here: ( https://twrp.me/devices/motorolanexus6.html )
Code:
fastboot flash recovery twrp-2.8.6.0-shamu.img
4. Restart the Bootloader again and then go to Recovery (TWRP). Now flash NO_FORCE_ENCRYPT_shamu_v1.0-signed.zip through TWRP, and flash SuperSU if you want root and whatever other zips you want to flash (Xposed, etc)
After flashing the NO FORCE ENCRYPT mod, reboot and you should be running 5.1.1 with all of your data and with your userdata partition intact and unencrypted!
———————————————————————————————————————————————————
OPTION 2 - SIDELOAD Method (Makes sense if you’re already on LMY47M):
1. Download hlxanthus's NO FORCE ENCRYPT mod and put it onto your phone so you can flash it later (in /storage/sdcard0) - https://basketbuild.com/filedl/devs...u/misc/NO_FORCE_ENCRYPT_shamu_v1.0-signed.zip
2. Follow the normal procedure, if you're already on LMY47M you can skip to step 3. Download LMY47M for Nexus 6 ( https://dl.google.com/dl/android/aosp/shamu-lmy47m-factory-5228e84a.tgz ) and extract the files, there is a zip file you want to extract that too.
Boot to the bootloader ("adb reboot bootloader") and fastboot flash the boot, cache, recovery, radio and system:
Code:
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash radio radio-shamu-<variable>.img
fastboot flash system system.img
3. Now flash TWRP, found here: ( https://twrp.me/devices/motorolanexus6.html )
Code:
fastboot flash recovery twrp-2.8.6.0-shamu.img
4. Restart the bootloader, and enter recovery mode (TWRP). Once in TWRP, go to Advanced -> ADB Sideload. You may need to unplug/plug in the USB cable to your computer again.
Download my version of LYZ28E from here: https://www.androidfilehost.com/?fid=23991606952609905
Note: I modified this version to work with TWRP, it will not work with the stock recovery (because I modified it, the signature on the file is now invalid). The only thing I changed was I edited the updater-script to remove the release keys check which seems to fail on the stock recovery and doesn't work right with TWRP).
Code:
adb sideload f69096766706fab3c721163f02aad9073a989d00.unsigned-shamu-LYZ28E-from-LMY47M-fullradio-fix-superblock-use-TWRP.zip
5. After it finishes, do not reboot yet. Go back and I recommend rebooting to recovery again. Now flash NO_FORCE_ENCRYPT_shamu_v1.0-signed.zip through TWRP, and flash SuperSU if you want root and whatever other zips you want to flash (Xposed, etc)
After flashing the NO FORCE ENCRYPT mod, reboot and you should be running 5.1.1 with all of your data and with your userdata partition intact and unencrypted!

why would you think that you have to be encrypted to push anything to recovery??? plus sideload is only one method to do it, the other is adb push. and if you use twrp recovery, you don't need any of those method's, as you can just move files over to twrp via your usb.

simms22 said:
why would you think that you have to be encrypted to push anything to recovery??? plus sideload is only one method to do it, the other is adb push. and if you use twrp recovery, you don't need any of those method's, as you can just move files over to twrp via your usb.
Click to expand...
Click to collapse
Sorry if I gave the impression you need to be encrypted to push to recovery, that wasn't my intent. Where did I give that impression? I can try to fix it in my original post. At no point in this procedure will your phone be encrypted - there will be times that the kernel will have the force encryption option turned ON in the fstab but you never will boot the phone when that is the case (like right after LRX22C is loaded, after LYM47M is sideloaded, and after you flash the stock boot.img for LYM47M - but you are not booting in any of these cases - not before you install a no forced encryption kernel)
adb push requires the phone is booted right? I wasn't able to get adb push to work in recovery.
I also didn't know TWRP allowed you to copy data over to your phone via USB, I know CWM recovery can do it - but that was a feature missing from TWRP - maybe they added it, I didn't check. You can do an adb push with TWRP, but what in my procedure would you change to use the adb push method in TWRP versus whatever I put in there? The only thing I can think of is asking you to put the mod file on the phone in the beginning.

liqice said:
Sorry if I gave the impression you need to be encrypted to push to recovery, that wasn't my intent. Where did I give that impression? I can try to fix it in my original post. At no point in this procedure will your phone be encrypted - there will be times that the kernel will have the force encryption option turned ON in the fstab but you never will boot the phone when that is the case (like right after LRX22C is loaded, after LYM47M is sideloaded, and after you flash the stock boot.img for LYM47M - but you are not booting in any of these cases - not before you install a no forced encryption kernel)
adb push requires the phone is booted right? I wasn't able to get adb push to work in recovery.
I also didn't know TWRP allowed you to copy data over to your phone via USB, I know CWM recovery can do it - but that was a feature missing from TWRP - maybe they added it, I didn't check. You can do an adb push with TWRP, but what in my procedure would you change to use the adb push method in TWRP versus whatever I put in there? The only thing I can think of is asking you to put the mod file on the phone in the beginning.
Click to expand...
Click to collapse
"So I just figured out how to sideload LYZ28E on my Nexus 6 without enabling forced encryption. "
actually adb push is very easy.. boot unto recovery, type adb push filename.zip, then it pushes to your phone and is listed in the main storage filesystem. id say its nearly identical to adb sideload.

simms22 said:
"So I just figured out how to sideload LYZ28E on my Nexus 6 without enabling forced encryption. "
actually adb push is very easy.. boot unto recovery, type adb push filename.zip, then it pushes to your phone and is listed in the main storage filesystem. id say its nearly identical to adb sideload.
Click to expand...
Click to collapse
Sorry maybe that first sentence is poorly worded. What I meant was, I figured out how to get LYZ28E onto my phone and disable the forced encryption on the OS too. The process wasn't as straightforward because the 2nd sideload wouldn't work correctly without booting into the OS first. After that, I couldn't get the LYZ28E image to sideload on stock recovery or TWRP without errors - but I was able to modify the LYZ28E OTA file so it would load with TWRP, and then I was able to load the no encrypt mod and supersu and get the phone working the way I wanted again.
Are you saying it would be easier if I push the zip file to the phone and install using TWRP as a zip file instead of trying to sideload it?

Step 3: "Hold down the Power and Volume Up button (may need to do it a few times) to get to the Recovery menu".
Actually, the correct key combination is: Hold power, then (while holding power button) press and release volume up.
Works first time, every time.

cam30era said:
Step 3: "Hold down the Power and Volume Up button (may need to do it a few times) to get to the Recovery menu".
Actually, the correct key combination is: Hold power, then (while holding power button) press and release volume up.
Works first time, every time.
Click to expand...
Click to collapse
Thanks, updated the original post.

liqice said:
Sorry maybe that first sentence is poorly worded. What I meant was, I figured out how to get LYZ28E onto my phone and disable the forced encryption on the OS too. The process wasn't as straightforward because the 2nd sideload wouldn't work correctly without booting into the OS first. After that, I couldn't get the LYZ28E image to sideload on stock recovery or TWRP without errors - but I was able to modify the LYZ28E OTA file so it would load with TWRP, and then I was able to load the no encrypt mod and supersu and get the phone working the way I wanted again.
Are you saying it would be easier if I push the zip file to the phone and install using TWRP as a zip file instead of trying to sideload it?
Click to expand...
Click to collapse
easier/harder isnt an option here, since any way takes seconds. im just saying there are several options for this, thats all

liqice said:
Code:
fastboot flash f69096766706fab3c721163f02aad9073a989d00.unsigned-shamu-LYZ28E-from-LMY47M-fullradio-fix-superblock-use-TWRP.zip
Click to expand...
Click to collapse
Shouldn't this step be
Code:
adb sideload f69096766706fab3c721163f02aad9073a989d00.unsigned-shamu-LYZ28E-from-LMY47M-fullradio-fix-superblock-use-TWRP.zip
instead of fastboot flash?

So if your starting out with 47E, your rooted and have TWRP ..... would you use adb sideload in TWRP or you issue the command from the PC?

Chahk said:
Shouldn't this step be
Code:
adb sideload f69096766706fab3c721163f02aad9073a989d00.unsigned-shamu-LYZ28E-from-LMY47M-fullradio-fix-superblock-use-TWRP.zip
instead of fastboot flash?
Click to expand...
Click to collapse
Oops, you're right. Thanks!

Gage_Hero said:
So if your starting out with 47E, your rooted and have TWRP ..... would you use adb sideload in TWRP or you issue the command from the PC?
Click to expand...
Click to collapse
This is where I was, LMY47E, rooted, unencrypted and with TWRP. I followed the entire procedure - went back to LRX22C using fastboot, then sideloaded LMY47M (T-Mobile version) - then flashed the no force encrypt boot.img - booted, after it finished booting, rebooted to the bootloader and so on ...
When you go to LRX22C you flash back to the stock recovery. So you need to boot into the stock recovery, pick "apply update from adb" and then run the adb sideload command from the PC.

Cheers for this.. just what I was looking for. I'm at work so I only scanned this quickly, but any major change in the directions from what you've posted going from an unencrypted LMY47D?

With the factory images being posted, I just did the following:
Flashed the factory images
While still in bootloader, flashed TWRP
Rebooted into TWRP
Pushed SuperSU and the No_Force_encrypt to the /sdcard/ partition
Installed via TWRP
Profit.

lamenting said:
Cheers for this.. just what I was looking for. I'm at work so I only scanned this quickly, but any major change in the directions from what you've posted going from an unencrypted LMY47D?
Click to expand...
Click to collapse
For LMY47D you need to get to LMY47M first, so you would follow the entire procedure, downgrade to LRX22C and then sideload LMY47M and so on.

Heavily updated the procedure since LMY47M and LYZ28E factory images are now available directly from Google.
Should be a lot easier and more straight forward now!

I just recently have this Nexus 6 and came from an LG G2. I went through the process of unlocking the phone and installing rooted LMY47D which meant 2 factory resets in a short period.
I'm now on 5.1 and would like to get rid of the memory leak which this build apparently has.
The title mentions "maintain no encryption".
I never found the time to find out about Lollipop. The title implies that encryption is mandatory on 5.1.1
Is this so?
I merely want the latest upgrade to 5.1.1 and don't want to enforce encryption on my data (Google already knows everything about me) is this the way to achieve this?
I am correct in thinking that I will not get an OTA offered anymore?

Boot loader and radio only...
So if I understand the instructions correctly, if you are still encrypted but rooted, from any Lollipop installation, fast boot flash the factory images... then flash TWRP ... root and done right? Then I have another question... the kernel I am running EX 1.07 along with Flar's app is running perfect for me.... any dangers in just flashing the boot loader and radio? I would like to wait on the system part until the kernel has been updated.....
Also, if I needed to do a restore, if I only flash the boot loader and radio have I pooched being able to go backwards to a nand backup?

FYI, step 3 in option one should read:
fastboot flash recovery twrp-2.8.6.0-shamu.img
vs
fastboot flash twrp-2.8.6.0-shamu.img

frater said:
I just recently have this Nexus 6 and came from an LG G2. I went through the process of unlocking the phone and installing rooted LMY47D which meant 2 factory resets in a short period.
I'm now on 5.1 and would like to get rid of the memory leak which this build apparently has.
The title mentions "maintain no encryption".
I never found the time to find out about Lollipop. The title implies that encryption is mandatory on 5.1.1
Is this so?
I merely want the latest upgrade to 5.1.1 and don't want to enforce encryption on my data (Google already knows everything about me) is this the way to achieve this?
I am correct in thinking that I will not get an OTA offered anymore?
Click to expand...
Click to collapse
Starting with Android Lollipop (5.0) and newer - at least on the Nexus 6 - encryption is turned on by default for the userdata partition.
You would - if you wanted to - backup all of the data on your userdata partition (e.g. Any pictures you've taken with the phone, etc - all of the data basically that shows up when you plug your phone into your computer).
Then you need to be running an OS that doesn't force encryption (for example if you follow my instructions) - this would also get you running 5.1.1.
After that you need to format your userdata - it wouldn't be encrypted at that point, and then copy your data back if you want to.
If you don't care about encryption, you can simply flash the factory 5.1.1 image following my instructions and skip the TWRP parts.

Help with bootloop

Hi,
I did search, but I didn't find any solution to the issue. I got the Nexus 6P 64 GB.
I unlocked my bootloader using the 6p Multitool. Thereafter I used my normal method of fastboot (Minimal ADB) to flash the boot.img from this thread http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344.
After that I flashed TWRP. Basically I followed the instructions here: http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928.
But my phone is not booting up.
It gives me this error:
Your device software cannot be checked for corruption. Please lock the bootloader."
But I tried that and it doesn't work. I tried from fastboot restoring to factory, but get the same message.
Please help me!

Did you check the enable oem unlocking in developer settings?
Sent from my Nexus 6P using Tapatalk

Yes. As I said, I achieved the unlock. Now I just can't get back into my phone or recovery or anything other than fastboot (where it says unlock)

isn't "Your device software cannot be checked for corruption. Please lock the bootloader." the new msg on boot when you are unlocked, and you have to wait ~10 secs before it startup ?

After that, I'm stuck on the Google screen. It just goes on and on. Left it for over 20 minutes at one point and it didn't get past it.
Edit: The multicolored animated google screen. The animation just keeps going and going.

Del.

Your issue might be due to the encryption of the phone. Take a look at this thread: http://forum.xda-developers.com/nex...recovery-twrp-2-8-7-0-touch-recovery-t3234976
From this thread:
NOTE: Decrypting data is not supported yet. The Nexus 6P will normally attempt to encrypt the device automatically on first boot. To use TWRP as you normally would, you will have to format data and install a slightly modified boot image with forceencrypt disabled. My Nexus 6P should arrive tomorrow and I will start working on decrypt once I get my hands on it.
Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.

Read through that thread. Part of the issue is that I don't know which variant (MDA89D & MDB08K) I have, or how to find that out seeing as I can't boot into the phone.
If I have the variant I may be able to fix this through the unified toolkit (though I'm not sure of that)

Did you ever fix this?

Try flashing the factory image and starting from scratch. You must have messed up somewhere. Re-download the boot.img from Chainfire's thread, maybe that was corrupt or something.

1. Download the MDB08K factory image (it's not a variant, it's a Marshmallow update) and unzip it.
2. Download the MDB08K boot.zip from Chainfire's modified boot.img thread
3. Download latest SuperSU beta zip
Wipe phone in TWRP, to include format data.
In bootloader, fastboot flash MDB08K
fastboot flash modified boot.img (from zip)
In TWRP, ADB sideload SuperSU
Reboot and it should perform normally.

kibmikey1 said:
1. Download the MDB08K factory image (it's not a variant, it's a Marshmallow update) and unzip it.
2. Download the MDB08K boot.zip from Chainfire's modified boot.img thread
3. Download latest SuperSU beta zip
Wipe phone in TWRP, to include format data.
In bootloader, fastboot flash MDB08K
fastboot flash modified boot.img (from zip)
In TWRP, ADB sideload SuperSU
Reboot and it should perform normally.
Click to expand...
Click to collapse
Thank you for your reply, but I can't get into TWRP either!! Any way for me to restore to factory or do the repairs from in flashboot without the restore?

I ran into the same issue last night trying to install TWRP. I'm still not sure how to get around it but I did get my phone back. you should be able to get to the bootloader (hold the power button until phone turns off, then hold vol up+vol down+power) once there use ADB fastboot to go back to stock.
this link will walk you through what you need. follow step 7.
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
here it is as well:
How To Flash The Factory Images (And Return To Stock)
Prerequisites: unlocked bootloader (section 1).
Download the appropriate factory images for your model here.
Unzip the angler-xxxxxx-factory-xxxxxxxx (x's replace variables) into a directory on your PC (for this guide we'll use C:\angler\).
Once unzipped you should have a folder named angler-xxxxxx (x's replace variables). Open it and move the following files to a new directory named C:\angler\images\:
bootloader-angler-angler-01.31.img
radio-angler-angler-01.29.img
(Please note that radio and bootloader naming changes from build to build so the filenames and below commands will change with them)
Within C:\angler\angler-xxxxxx\ you'll see another zip archive named image-angler-xxxxxx, unzip the contents of that zip into the C:\angler\images\ folder we created before. Now within C:\angler\images\ you should have the following files:
android-info.txt
boot.img
bootloader-angler-angler-01.31.img
cache.img
radio-angler-angler-01.29.img
recovery.img
system.img
userdata.img
vendor.img
Boot into the bootloader and connect your phone to your PC via usb cable.
Open a command prompt from within your fastboot folder (navigate to where you have fastboot.exe located on your PC, shift + right click anywhere within that folder, select open command prompt here), enter these commands to flash:
Code:
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-01.31.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-m8994f-2.6.28.0.65.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash cache C:\angler\images\cache.img
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash userdata C:\angler\images\userdata.img
fastboot flash vendor C:\angler\images\vendor.img

Thank you. I was eventually able to do tysonwald's suggestion. First I didn't know what my version was, so I couldn't.
At some point I was able to get into the phone with constant gapp errors, check it.
Now my phone is unlocked and rooted. But when I go to settings to security (and when I tried to set up my fingerprint) settings crashes. Any ideas?
There was still some issue. I wiped the phone with the above method again, did NOT set up twrp/root, and everything works. It was something about the custom boot image I guess. Any advice if I want to try to set it up again?

Problem solved. Needed to update to newer image before doing everything. Issue resolve from Heisenberg's thread. Thank you all!

I had the same damn issue last night. Thise bootleg instructions had me flashing build k boot.img on build D. Maybe i wasnt paying attention lol!

I have a very similar problem, I flashed the k boot img. and now I'm stuck in an endless bootloop any idea?

TeriusPR said:
I have a very similar problem, I flashed the k boot img. and now I'm stuck in an endless bootloop any idea?
Click to expand...
Click to collapse
Read thru this guide and follow the instructions to the T. http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928

I had a similar issue just now where my phone got stuck at the TWRP logo. Selecting the reboot option in download mode refused to remove it. I had to follow step 10 to get my phone back to stock. I'm afraid to try this again now

Is there anyway to know which version do i need to download? i bought the phone already bricked and i am trying to bring it back to life

Help help help with a hard bricked 6P

Hello guys,
I had my phone rooted with latest twrp. I flashed stock+ rom with Franco Kernel 25r and the A.R.I.S.E file for better sound. I've done the same set up minus the ARISE file and never had an issue.
well to my luck it kept bootlooping and I wasn't able to get back into my custom recovery. When I got home and got my hands on a pc I did a factory reset by manually flashing stock google img . I even used a couple tools since I ran out of ideas and still no luck.
I'm able to do anything through fastboot but I can't seem to get into my recovery at all.
Any ideas or tips of where I should go next?

Not a Hardbrick
As long as you can get to the bootloader mode, you haven't hard bricked your device. Hardbricking is a point where you cant boot your device and in to bootloader so there is no way to flash your device to a useable state.
Now as you can boot to the bootloader, just fastboot boot twrp.img and if you have a factory image zip, copy it in your device internal storage and flash it. Its that simple, provided you are already using an unencrypted boot.img in your current setup. Or else the next step is to flash an decrypted boot.img(you will loose all your userdata and internal storage data.). There are ways to mount the the encrypted filesystem if you are using a pin or password combo with your fingerprint. But without it its a bit more trickier so just for ease and if you dont have any inseparable data in your device now just flash a decrypted boot.img and then you can easily mount your internal storage to your pc and copy the factory image and the rest you already know..

At this point, I'd recommend a full reset.
Flash all the images in the latest Android M factory image (don't flash DP5 or similar N based ROMs): Recovery, Boot, System, Bootloader, Radio, everything.
Once you get stabilized and back into a working phone, then start rooting and messing around with kernels and what not.
To be completely honest, I've flashed nearly every ROM for the 6p, as well as my other Nexus devices, Galaxy phones, Sony phones, and no-name brands and none of those ultra modified kernels did any noticeable change. I tried the F2FS, NTFS, etc file system changes, tweaks to the governors and IO's, all of that, and found the stock kernel was the best. If a kernel with a different IO Scheduler worked even 10% better than the current implementation, and was just as stable, don't you think the Google/Android Engineers would've pushed that to live?
Currently running Pure Nexus July 23rd Update, everything stock that comes with it, Systemless Root/XPosed, and Viper4Android and have never had a performance or stability issue. I'd recommend you do the same.

leninmon said:
As long as you can get to the bootloader mode, you haven't hard bricked your device. Hardbricking is a point where you cant boot your device and in to bootloader so there is no way to flash your device to a useable state.
Now as you can boot to the bootloader, just fastboot boot twrp.img and if you have a factory image zip, copy it in your device internal storage and flash it. Its that simple, provided you are already using an unencrypted boot.img in your current setup. Or else the next step is to flash an decrypted boot.img(you will loose all your userdata and internal storage data.). There are ways to mount the the encrypted filesystem if you are using a pin or password combo with your fingerprint. But without it its a bit more trickier so just for ease and if you dont have any inseparable data in your device now just flash a decrypted boot.img and then you can easily mount your internal storage to your pc and copy the factory image and the rest you already know..
Click to expand...
Click to collapse
First of all thank you for the response.
I've tried flashing the most current twrp and it seems to go through fine on fast boot but when I actually try to get into recovery from the device it will boot loop and just keep doing that.
How can I get into the phones storage through fastboot?
Where can I get the factory zip?
it feels as if everything seems to go good through fastboot but when I actually try to boot the phone nothing seems to work.

Wiltron said:
At this point, I'd recommend a full reset.
Flash all the images in the latest Android M factory image (don't flash DP5 or similar N based ROMs): Recovery, Boot, System, Bootloader, Radio, everything.
Once you get stabilized and back into a working phone, then start rooting and messing around with kernels and what not.
To be completely honest, I've flashed nearly every ROM for the 6p, as well as my other Nexus devices, Galaxy phones, Sony phones, and no-name brands and none of those ultra modified kernels did any noticeable change. I tried the F2FS, NTFS, etc file system changes, tweaks to the governors and IO's, all of that, and found the stock kernel was the best. If a kernel with a different IO Scheduler worked even 10% better than the current implementation, and was just as stable, don't you think the Google/Android Engineers would've pushed that to live?
Currently running Pure Nexus July 23rd Update, everything stock that comes with it, Systemless Root/XPosed, and Viper4Android and have never had a performance or stability issue. I'd recommend you do the same.
Click to expand...
Click to collapse
Thanks for the reply.
I've done the manual flashing already and flashed everything single item the most current factory image. Everything seemed to have gone through okay but when I rebooted the phone it was back to 0.
I'm actually considering getting rid of the phone now since it is my daily =/

Format each partition before flashing.
fastboot format <partition>
wait until it's done, then
fastboot flash <partition> <image>
Some partitions can't be formatted, which there are ways around, but try this first.

Just get to bootloader mode and try booting the twrp.img
fastboot boot twrp.img
From the twrp ui, go to advanced wipe and format your storage.
To mount the internal storage on your PC, enable mtp from twrp screen.
If U are using a decrypted boot.img, it will easily mount ur internal storage. Or try flashing a decrypted boot.img
fastboot flash boot boot.img
Then try the above again..

leninmon said:
Just get to bootloader mode and try booting the twrp.img
fastboot boot twrp.img
From the twrp ui, go to advanced wipe and format your storage.
To mount the internal storage on your PC, enable mtp from twrp screen.
If U are using a decrypted boot.img, it will easily mount ur internal storage. Or try flashing a decrypted boot.img
fastboot flash boot boot.img
Then try the above again..
Click to expand...
Click to collapse
I flashed the twrp.img and it went through successfully at least on the computer it did but when the phone actually tries to get into recovery (twrp) it will start to boot loop and keep on doing that. I tried both an encrypted and decrypted boot img but it still made no difference.
I'm really going crazy over this

Wiltron said:
Format each partition before flashing.
fastboot format <partition>
wait until it's done, then
fastboot flash <partition> <image>
Some partitions can't be formatted, which there are ways around, but try this first.
Click to expand...
Click to collapse
I just tried this and had no luck =/....the phone wont get past the google boot screen

You need to explain more on what you actually tried here.
Just download the latest factory image and try to flash the latest bootloader using fastboot.
Then boot to the bootloader and try formating the device. Not wiping
Then you have to
fastboot boot twrp.img
I believe you have only tried wiping not formating. I faced similar issue before. But once I flashed a decrypted boot.img, it cleared the user data and then I was able to get to twrp.
Maybe your twrp img is corrupted if this didn't work.

leninmon said:
You need to explain more on what you actually tried here.
Just download the latest factory image and try to flash the latest bootloader using fastboot.
Then boot to the bootloader and try formating the device. Not wiping
Then you have to
fastboot boot twrp.img
I believe you have only tried wiping not formating. I faced similar issue before. But once I flashed a decrypted boot.img, it cleared the user data and then I was able to get to twrp.
Maybe your twrp img is corrupted if this didn't work.
Click to expand...
Click to collapse
i just flashed the latest bootloader from the most recent factory image and i did the command format user data and then tried the fastboot boot twrp and the phone will then try to get into recovery, the google logo comes up lasts a couple seconds and boot loops all over to where is says my phone cant be check for corruption
By now i should have been able to get into recovery and it wont go through

edgarted said:
i just flashed the latest bootloader from the most recent factory image and i did the command format user data and then tried the fastboot boot twrp and the phone will then try to get into recovery, the google logo comes up lasts a couple seconds and boot loops all over to where is says my phone cant be check for corruption
By now i should have been able to get into recovery and it wont go through
Click to expand...
Click to collapse
download a factory image and run the flash all file...... it should reboot your phone after 5 minutes and the issue should be resolved.. a hard brick would be a device that does nothing.... in this case i believe that you just didnt do something right.

Then download the latest factory image and extract it
fastboot flash radio.img
fastboot flash bootloader.img
& do a fastboot update the rest archive file as it is
This will flash the rom via fastboot& U don't have to rely on TWRP or CWM

i42o said:
download a factory image and run the flash all file...... it should reboot your phone after 5 minutes and the issue should be resolved.. a hard brick would be a device that does nothing.... in this case i believe that you just didnt do something right.
Click to expand...
Click to collapse
I was really really hoping this would help. I erase/formated everything before flashing anything. I then ran the flash-all file and it took a couple of minutes and it said finished on the command box and my phone restarted and went into the white google logo and rebooted again with a bootloop. I waited around 15 minutes hoping it would start but it didn't.
It honestly feels as if the phone is not processing the full commands but on the pc it seems to go through successfully
is there a way to force an install of a rom and see if maybe a dirty flash over the stock one will allow it to start up?

leninmon said:
Then download the latest factory image and extract it
fastboot flash radio.img
fastboot flash bootloader.img
& do a fastboot update the rest archive file as it is
This will flash the rom via fastboot& U don't have to rely on TWRP or CWM
Click to expand...
Click to collapse
i know how to flash the radio and bootloader but how do i do a fastboot update?

edgarted said:
i know how to flash the radio and bootloader but how do i do a fastboot update?
Click to expand...
Click to collapse
Just unzip the factory image and there U can see the flash shell script files too. Open them in a text editor & U could see the exact command. In a factory img, they also do the same thing via script files. Flashing the radio & bootloader & updating the rest archive

so this is what I've done
I've manually flashed every file needed for the factory image from google.
I also tried wugfresh tool kit which is great but didn't help me much. I flashed stock recovery and treid to boot into to and nothing. I flashed a customer recovery and nothing.
It always does the same thing
the screen that says my phone can't be checked for corruption and then the google sign comes up stays on for a couple seconds and then it bootloops to the can't be checked for corruption.
I try to get into recovery using fastboot commands and the phone does the same exact thing.
I was even able to lock and relock the bootloader and I was able to successfully flash everything at least that is what it showed on the computer
so ive read almost every thread that had to do with bricking and I feel like an expert now but im starting to think it is done =/

edgarted said:
so this is what I've done
I've manually flashed every file needed for the factory image from google.
I also tried wugfresh tool kit which is great but didn't help me much. I flashed stock recovery and treid to boot into to and nothing. I flashed a customer recovery and nothing.
It always does the same thing
the screen that says my phone can't be checked for corruption and then the google sign comes up stays on for a couple seconds and then it bootloops to the can't be checked for corruption.
I try to get into recovery using fastboot commands and the phone does the same exact thing.
I was even able to lock and relock the bootloader and I was able to successfully flash everything at least that is what it showed on the computer
so ive read almost every thread that had to do with bricking and I feel like an expert now but im starting to think it is done =/
Click to expand...
Click to collapse
Hey there. First off make sure to unlock again your bootloader. Then you may follow post # 10 of @Heisenberg 's flashing guide for our device.
First images to flash would be bootloader and radio. First flash bootloader, then make sure to issue the command adb reboot-bootloader. Then afterwards once the phone has rebooted back to bootloader, flash radio, then again do the adb reboot-bootloader again.
Once the phone is again back to bootloader flash the rest of the images except userdata. For the boot.img and recovery.img, flash the stock ones-don't use the decrypted boot.img and don't flash the twrp.img yet. Once all necessary images have been flashed issue the reboot-booloater command one more time, then on the bootloader screen choose the reboot option. Wait anywhere from 3-10 minutes for the phone to load. Let us know how it goes for you.

blitzkriegger said:
Hey there. First off make sure to unlock again your bootloader. Then you may follow post # 10 of @Heisenberg 's flashing guide for our device.
First images to flash would be bootloader and radio. First flash bootloader, then make sure to issue the command adb reboot-bootloader. Then afterwards once the phone has rebooted back to bootloader, flash radio, then again do the adb reboot-bootloader again.
Once the phone is again back to bootloader flash the rest of the images except userdata. For the boot.img and recovery.img, flash the stock ones-don't use the decrypted boot.img and don't flash the twrp.img yet. Once all necessary images have been flashed issue the reboot-booloater command one more time, then on the bootloader screen choose the reboot option. Wait anywhere from 3-10 minutes for the phone to load. Let us know how it goes for you.
Click to expand...
Click to collapse
Hello and thank you for helping.
I tried this method a couple of minutes ago. I flashed them this same way
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash cache C:\angler\images\cache.img
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
It does the same exact thing it will try and restart the phone, the message that says it can't be checked for corruption the google logo comes up and it repeats it self non stop.
This is what doesn't make sense to me.
This is the file that I had flashed through twrp when it was working fine
Leviticus 1.3 - http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709

edgarted said:
Hello and thank you for helping.
I tried this method a couple of minutes ago. I flashed them this same way
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash cache C:\angler\images\cache.img
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
It does the same exact thing it will try and restart the phone, the message that says it can't be checked for corruption the google logo comes up and it repeats it self non stop.
This is what doesn't make sense to me.
This is the file that I had flashed through twrp when it was working fine
Leviticus 1.3 - http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Click to expand...
Click to collapse
This is weird. What version of the stock factory images did you flash? I've been using leviticus 1.3 since it came out and when i was still on stock rom. I switched over to cm builds and have been flashing every nightly since the 7/24th build, and in the process repeatesly reflashing the aound mod along, and i've had zero issues with the phone booting afterwards.

Download Mode Recovery on H918

After installing twrp using the one click root method, it restarted my V20 and I ended up in recovery mode (TWRP) and unable to boot into the OS. It seems I only have access to fastboot, download mode, and TWRP at this moment. I tried flashing the partitions with twrp, but twrp isn't realing my SD card for some odd reason, and I don't believe theres another way to move the file directly to the phone. I've been trying to work with "LG FlashTool" for hours, and keep getting the same error. Is there a reliable way to flash the OS through download mode? Thanks!

There is currently no way to flash those .tot images. What happens when you try to boot, where does it get stuck?
In TWRP you can connect to a PC and access the storage. Did you try moving the files that way?

slayerh4x said:
There is currently no way to flash those .tot images. What happens when you try to boot, where does it get stuck?
In TWRP you can connect to a PC and access the storage. Did you try moving the files that way?
Click to expand...
Click to collapse
I apologize for not checking my XDA notifications frequently enough.
I was able to copy over the .img system, boot, and recovery files to my internal storage when I was booted into TWRP then flashed them in TWRP.
Thanks for the help!

KingofPineCones said:
I apologize for not checking my XDA notifications frequently enough.
I was able to copy over the .img system, boot, and recovery files to my internal storage when I was booted into TWRP then flashed them in TWRP.
Thanks for the help!
Click to expand...
Click to collapse
I tried doing this and my system rebooted back into TWRP. Where did you get the files? Also did you ever get the encryption unsuccessful error? Whenever I install a system image or nandroid backup my phone reboots into TWRP.

crazyc78 said:
I tried doing this and my system rebooted back into TWRP. Where did you get the files? Also did you ever get the encryption unsuccessful error? Whenever I install a system image or nandroid backup my phone reboots into TWRP.
Click to expand...
Click to collapse
The encryption unsuccessful error was mentioned in the original TWRP form, you're just supposed to tap cancel and ignore it. It seems to happen every time you boot into TWRP. As for the .IMG files, I forgot where I got these but as soon as I find the post I'll be sure to give the creator credit. These worked perfectly for my H918.
Link to .zip file with the .img file-
https://drive.google.com/file/d/0B53iMlcsyyiKenAtT2k5STl0Umc/view?usp=drivesdk
(On mobile app or else I would've embedded it)
Boot into TWRP and push them through ADB into your device, then flash with TWRP. Make sure to flash system and recovery together, THEN REBOOT. If you flash system or recovery apart then reboot it might not work. I pushed them to /data/ and it worked for me. system.img is about 4GB if I remember correctly, so that one took a long time to push through ADB, about an hour and a half, just be prepared to wait a bit. Good luck!

KingofPineCones said:
The encryption unsuccessful error was mentioned in the original TWRP form, you're just supposed to tap cancel and ignore it. It seems to happen every time you boot into TWRP. As for the .IMG files, I forgot where I got these but as soon as I find the post I'll be sure to give the creator credit. These worked perfectly for my H918.
Link to .zip file with the .img file-
https://drive.google.com/file/d/0B53iMlcsyyiKenAtT2k5STl0Umc/view?usp=drivesdk
(On mobile app or else I would've embedded it)
Boot into TWRP and push them through ADB into your device, then flash with TWRP. Make sure to flash system and recovery together, THEN REBOOT. If you flash system or recovery apart then reboot it might not work. I pushed them to /data/ and it worked for me. system.img is about 4GB if I remember correctly, so that one took a long time to push through ADB, about an hour and a half, just be prepared to wait a bit. Good luck!
Click to expand...
Click to collapse
Thanks I appreciate the response, I was able to get my phone up and running by flashing a deodexed rom.

What are the commands to flash the stock system, boot image and recovery through fastboot? Is that what you used?

KingofPineCones said:
The encryption unsuccessful error was mentioned in the original TWRP form, you're just supposed to tap cancel and ignore it. It seems to happen every time you boot into TWRP. As for the .IMG files, I forgot where I got these but as soon as I find the post I'll be sure to give the creator credit. These worked perfectly for my H918.
Link to .zip file with the .img file-
https://drive.google.com/file/d/0B53iMlcsyyiKenAtT2k5STl0Umc/view?usp=drivesdk
(On mobile app or else I would've embedded it)
Boot into TWRP and push them through ADB into your device, then flash with TWRP. Make sure to flash system and recovery together, THEN REBOOT. If you flash system or recovery apart then reboot it might not work. I pushed them to /data/ and it worked for me. system.img is about 4GB if I remember correctly, so that one took a long time to push through ADB, about an hour and a half, just be prepared to wait a bit. Good luck!
Click to expand...
Click to collapse
So I downloaded this file you have in the reply... How can I flash the files in the zip through Fastboot? This currently is the only thing I can boot into to modify the system. The phone boots fine, but I cannot use ADB because it won't authorize the device. I have repeatedly tried killing the ADB server and restarting it, changed the USB ports to no avail... At this point, I cannot boot into TWRP even though it should be operational still.

andrewjt19 said:
So I downloaded this file you have in the reply... How can I flash the files in the zip through Fastboot? This currently is the only thing I can boot into to modify the system. The phone boots fine, but I cannot use ADB because it won't authorize the device. I have repeatedly tried killing the ADB server and restarting it, changed the USB ports to no avail... At this point, I cannot boot into TWRP even though it should be operational still.
Click to expand...
Click to collapse
Which TWRP version do you have? Is it RC8 or above? If its not then you are stuck until the TOT files can be used in LG UP or if we get a KDZ (Havent checked recently if a KDZ is available).
If you do there is a fail safe in TWRP (RC8 and above) that you boot to the LG factory reset and go through with it, TWRP does not execute the command and just boots to TWRP.

DarkestSpawn said:
Which TWRP version do you have? Is it RC8 or above? If its not then you are stuck until the TOT files can be used in LG UP or if we get a KDZ (Havent checked recently if a KDZ is available).
If you do there is a fail safe in TWRP (RC8 and above) that you boot to the LG factory reset and go through with it, TWRP does not execute the command and just boots to TWRP.
Click to expand...
Click to collapse
I'm running the latest version of TWRP not the RC8.

andrewjt19 said:
I'm running the latest version of TWRP not the RC8.
Click to expand...
Click to collapse
ONLY USE THIS METHOD IF YOU HAVE TWRP RC8 OR ABOVE INSTALLED!!!!! OTHERWISE YOU WILL ACTUALLY FACTORY RESET YOUR DEVICE!!!!!
While the device is powered off, press and hold Vol - and Power button. When you see the LG logo quickly release only the power button and re-press and hold the power button (Never let go of the Vol - button) This will boot you into the LG Factory reset screen. ONLY USE THIS METHOD IF YOU HAVE TWRP RC8 OR ABOVE INSTALLED!!!!! OTHERWISE YOU WILL ACTUALLY FACTORY RESET YOUR DEVICE!!!!! Choose yes to both options and you will be rebooted into TWRP. TWRP intercepts this command and ignores the factory reset part.

Will definitely give a shot. Thanks. I'll report back when I get to do it...

what are commands to flash the sys files

Nokia x6.1 bootloops to twrp.

So it had been a while since I had tried getting into recovery twrp but I figured I could remember how so I did
fastboot flash boot twrp etc.img
This was a mistake according to the site here > https://twrp.me/nokia/nokia6_1.html
WARNING: If you accidently flash TWRP to your device using fastboot instead of temporarily booting the image, you will need to download the latest factory image for your device and reflash the boot image.
Click to expand...
Click to collapse
Which is exactly what I did
So now my phone is either stuck on the Nokia logo, or I can load twrp.
They provide some info on fixing it but I'm not sure I understand what they are saying. Can anyone help with this?
The phone was running Oreo (not sure which version unfortunately) and it was fully rooted and running magisk/xposed/su just fine before my mistake.
I don't have access to fastboot. Only Twrp and adb commands.
Edit, I can get to fastboot/download mode through the twrp terminal.
[SOLVED]
So I was able to use twrp to copy all of my internal files onto an sd card.
Then I set about getting this tool here > https://github.com/RaghuVarma331/Nokia-Tool the firmware specific to my phone, and modifying the bat file found here > https://github.com/RaghuVarma331/Nokia-Tool/blob/master/batscripts/Nokia-Tool-DRG-B2N-PL2-CTL.bat (because windows for some reason gave me a 16 bit application warning when I tried to use the tool exe)
My phone flashed a bunch of time and I was able to load up an almost entirely stock android 10, still capable of using magisk, edxposed, etc.
And now all there is to do is to get everything back onto it and set up which is at this point, the best case scenario.