Sim Unlock - Honestly FREE - Galaxy S6 General

Hi all.
IMPORTANT S7 T-Mobile and S8 T-Mobile are Qualcomm based and MY METHOD DOES NOT WORK. I WILL UPDATE WHEN/IF IT DOES
UPDATE 27.01.2018
MAGISK........
I am having trouble unlocking on phones with Magisk installed for ROOT
Nothing against Magisk, I personally use and love it. Feel free to install this AFTER UNLOCK
I'm just having trouble with the unlock using Magisk.
I am offering a free unlock via
I will still gladly accept any donations that come my way via PayPal ([email protected])
But DONATION is 100% OPTIONAL
All i ask is RESPECT and PATIENCE. (if these are not given then I may CHOOSE not to help you)
Remember this is taking time away from my wife and family to help YOU!
This is a FREE remote unlock service. AT YOUR OWN RISK.
No, I will not share my method..... as it could get patched by Samsung.
Here we go........
SEE CURRENT SUPPORTED MODELS AND FIRMWARES HERE
F.A.Q
Q. What if my IMEI is bad or blacklisted?
A. There are a few times of blacklist... T-Mobile seems to block INTERNAL only if non payment. Others will block if non payment or lost/stolen.
This does not effect SIM unlock, I can do it regardless.... However, you WILL NOT GET NETWORK SIGNAL IF BLOCKED
Check here for T-mobile https://www.t-mobile.com/verifyIMEI.aspx and also here for all models http://imei24.com/blacklist_check/
If you are not sure ask first!
Q. Can you change/repair my IMEI?
A. HELL NO. This is not only against XDA Rules but it is illegal in most countries, including mine.
Q. Is this really free?
A. Yes, although I do hope for a donation for my time and effort
Q. When are you available?
A. See below.
Q. Can we get on with it all ready?
A. Yes!
Remote Sim Unlock Preparation
Contact
Please be considerate of my time zone this it GMT +03 (UTC +13), check here NZDT https://www.timeanddate.com/time/zones/nzdt I am usually available after work 5PM until 8PM.
I am also available some weekends. Leave me a message on hangouts here with [email protected] and i will get back to you ASAP.
Please contact me when you are ready after reading below. Contact [email protected] via Google Hangouts.
If you do not have a reply within 24 hours then please email me with your gmail address on [email protected] and I will add you to hangouts.
Google Hangouts is needed so you can follow directions as I unlock your device. Everyone with a Google accounts has Google Hangouts.
You can access it via hangouts.google.com
Phone Settings ALL Models
Disable FRP by enabling OEM UNLOCK
http://techbeasts.com/how-enable-oem-unlock-android-lollipop-marshmallow/
Enable USB debugging
https://forum.xda-developers.com/fire-phone/general/guide-enable-usb-debugging-setup-t2859697
Revoke USB authorization (if applicable)
Developer Settings > Revoke USB authorization
GSM Only
Phone dialer > *#0808# > USB = AP
Phone dialer > *#0808# > USB SETTINGS = DM + ACM/MODMEM + ADB (note, will say ACM or MODEM)
If and only IF the above doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet)
SPRINT Only
Phone dialer > ##3424# >Qualcomm USB settings > DM + ADB + Modem
If the above asks for MSL or doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet) then we can get MSL to enable the above if you need MSL
For those that don't know... the 5th to last digit in the firmware is the BOOTLOADER (BL) version. YOU CAN'T GO BACK!!
i.e G920TUVU5EQC2 the BL version is 5 so you can't flash anything less than BL version 5
PC
You will need a Windows PC for the software. Please ensure you have Windows 7 or newer
Windows Vista and XP are NOT RECOMMENDED (for anything lol).
Please download FlexiHub http://www.eltima.com/wiki/user-guides/flexihub-windows/installation.html and install on your PC.
Please reboot after install.
Please create a FREE flexihub account here https://flexihub.eltima.com/user/registration/ AFTER ENTER DETAILS, YOU WILL SEE A PAYMENT PAGE... CLOSE WINDOW NOW. FREE ACCOUNT ALREADY CREATED
Or I have a few accounts if you wish to use one just let me know.
Please have FlexiHub open and logged in.
Unlocking Process
When you have contacted me and I have replied that we are ready you may proceed to:
Open flexihub and log in to your account
DO NOT SEND COM PORT. THIS IS USELESS TO ME ALONE
If needed click 'UNLOCK' on the phone's driver so it can be accessed (i.e Samsung_Android OR Gadget_Serial OR MSMxxxx)
Right click on your phone's driver in flexihub(i.e Samsung_Android OR Gadget_Serial OR MSMxxxx) and click send invite.
Type in [email protected] and click OK.
I will connect to the device and proceed from there.
Please watch phone for USB Authorization prompt.
Check the box then press OK.
I will disconnect and reconnect as required (using FlexiHub).
Watch phone Screen for SU (ROOT) prompt and press GRANT.
All you need to do is watch the phone for USB Authorization and ROOT grant.
Please follow the instructions I send via Google Hangouts
After we are finished you can return your device settings to as they were and you can remove FlexiHub from PC.
Please kindly donate via PayPal to [email protected] (once again 100% optional)

Nice work mate! Really useful!

Nice, but why no one tells us how to do it by ourselves? Does it require some secret hacks or what?

kapiszon53 said:
Nice, but why no one tells us how to do it by ourselves? Does it require some secret hacks or what?
Click to expand...
Click to collapse
If you will search good then you found it also in another sources "how to unlock"

rifek4 said:
If you will search good then you found it also in another sources "how to unlock"
Click to expand...
Click to collapse
Can you PM me a link please. I couldn't find anything

Are you available now ?

I can vouch for the man, He has done several of my devices And me being a bad lazy cheap person never did get around to donating to him,
He quickly and promptly unlocked again several devices.
Stifilz I need you donation link as I will glady donate for previous services you have rendered.

Im still doing this been very few at the moment :/

Still doing it and doing it well.
Thanks again mate!
I sent "a beer" your way.

dude please can u help me unlock my Samsung S6 SM-G920T ? actually i'm from indonesia but dont know why my devices cant retrieve any short message or getting phone call.

toleeq said:
dude please can u help me unlock my Samsung S6 SM-G920T ? actually i'm from indonesia but dont know why my devices cant retrieve any short message or getting phone call.
Click to expand...
Click to collapse
Dude, please read thread and contact properly

Awesome person, Canadian s6 unlocked for me, i will be donating because this person keeps their word, thank you

Everything worked great! He helped me with a canadian S6.
Thanks

Bump.
Still doing this.
Few changes made to thread for clarity,
Mainly........
SEE CURRENT SUPPORTED MODELS AND FIRMWARES HERE

Initial firmware requirements?
I am due to receive a Galaxy S6 (SM-G920F) which I think may be locked to O2 (UK). I don't know what firmware will be installed, however I suspect it will be the latest stock firmware. My intention is to install TWRP & Lineage 14.1, however I need it unlocked as I use Vodafone (it may well be unlocked but I won't know until I receive it and put my SIM card in it).
With regards to the specific firmware that is required for your 'procedure' I am guessing I would need to flash the 'combination' firmware .md5 file you have provided a link for on the spreadsheet from Odin? Then I'd need to run through the prerequisites and assuming all that goes smoothly I would then go through the procedure with you (assuming you are available).
Its just the initial firmware bit I am a bit confused over?
Cheers
Andy

unlock SM G920P
hello bro can u please unlock my s6 920p sim lock

is this still available
i have a SM-G920F
UK Version
Locked Sim
Could you get back to me and let me know if you or anyone can help me unlock it to any network.
cheers
John

Related

secret code Zte blade (san francisco)

I'm not responsible for what might happen on your phone if you choose to dial any of these!
These are the codes that work on the standard phone dialler app on the Orange San Francisco, but I'm pretty sure they'll be almost identical on other models that we collectively know as "ZTE Blade". Known small differences (in texts) are down to whether the firmware expects to be running on an OLED or TFT display, and whether you've deleted seemingly unused apps like ChiperTest.apk, fcctest.apk and QcNvTest.apk. Most are prefixed with "*983*", which is "*ZTE*" in phone letters -- I've added a mnemonic for the other part where I think it's obvious (feel free to suggest better ones!).
"Automatic Inspection" runs through the basic tests automatically (usually you need press a button to move on to the next bit -- don't get thrown by any blank colour test screens!). There are a number of interesting items for developers, with hardware info and other goodies. If any of the descriptions don't make the function obvious then it's either poorly written or I don't know exactly what it does (I'll happily update this if others can explain better).
If the code has been recognised by the dialler then it will react immediately when you enter the final "#". If nothing happens when you've done that, don't press Dial!
Edit: on the ROMs based on the Japanese 2.2 you need to put the phone into "Engineering Mode" first, by dialling *ZTE*OPENEM# (*983*673636#) -- this action will be confirmed by a quick pop-up. To close this mode, dial *ZTE*CLOSEEM# (*983*2567336#) -- this then prompts whether you want to do a Factory Reset, which you do not have to do (you can simply Back away from this screen).
Dial Mnemonic Operation
*983*0# Menu (20:Battery/OLED/Back Light/Vibrator/Ringer/LED/Key/OLED off/SD/BT address/Radio Info/Memory/TouchPaint Test/Audio Loop/FM/Camera/GPS Test/IMEI/IMSI)
*983*3640*01# IMSI
*983*25# Battery Info[/COLOR]
*983*31# OLED Test
*983*26# Backlight Test
*983*850# Radio Test 0
*983*86# Vibrator & LED Test
*983*84# Ringer Test
*983*07*01# Headset Test
*983*07*02# Key Test
*983*3470# LCD Test
*983*81# SD Test
*983*890# -
*983*26*# Radio Test 1
*#06# IMEI
*983*27274# CRASH Reboot
*#08# Test Flag [Note: requires QcNvTest.apk in /system/app]
*#09***# BT Test
*983*1275# _ASK Dev Info
*983*7# Menu (4:Version/IMEI/IMSI/BT address)
*983*3640# DOH+ Phone Info (inc ping test, radio on/off)
*983*636# MEM Memory Test
*983*28# BT Emode BT Test
*983*477# GPS GPS Test
*983*21# Audio Loop Test
*983*70# Automatic Inspection
*#18# LED Test
*#19# TouchPaint Test
*983*36# FM FM Test
*983*57# Factory Reset
*983*473# Camera
*#23# Video Camera
*983*10# Delete (Touchscreeen) Calibration File
*#25# FM Test
*983*2726# SIM Contacts Op 1
*983*37# SIM Contacts Op 2
*983*6726# SIM Contacts Op 3
*983*154# "test" Menu (12:Self-starting/Software
Version/Hardware Version/PSN/Test Flag/[Completed]/Board Serial/Bluetooth
Address/SMS security/SMS Registration Status/Flash Type/PRL Version/Serial Configuration)
*983*07# Menu (9LED/Ringer/Vibrator/Key Test/Audio Loop/Headset Test/FM/Camera/SD)
*983*5182# Dev Info
*983*7469# SHOW Automatic Inspection
*#26***# Sensor Test
*983*7936# QXDM Save Qxdm in log system
*987*0# Menu (4roduce Information[->"test" Menu]/Automatic Inspection/Factory data reset/Battery information)
*#27***# Compass Test
*983*87274# USBSI USB Switch Test
*983*06# BT Test
*983*564738# LOGSET LOG Set (inc sys_rw)
*983*93# FCC Test [Note: requires fcctest.apk in /system/app]
*983*2377# CFQP Call Forwarding Query with PowerOn
*983*24474636# CHIPINFO Chiper Test (chip info) [Note: requires
ChiperTest.apk in /system/app]
*983*29873283# AXUPDATE Touchscreen Updater
*983*73564# SDLOG SD Log​
Note: the above are for the standard ROM (well, apps) running 2.1. The current Froyo ROM (with standard dialler, etc.) does not have the Touchscreen Updater, but adds:
Dial Operation
*987*123456# DM Test
IN modaco
Hello, what code shude I use to know if my SF is TFT or Amoled?
Regards!
Check the build number in Settings>About Phone. AMOLED ends in 05, LCD ends in 08. IIRC all white SF models are 08 and most grey are 05 (unless its a newer unit which will likely be 08).
Thank´s man.
Mine is 01. What that means?
Looking at the screen characteristics it seems like LCD.
Thanks man. great post
Really nice. Works on Boost Mobile Warp Sync N9515.
Would you happen to have a code that forces prompt for unlock? (Changing sim cards doesn't trigger anything)
same here... up for this....
No Boost Mobile ZTE Warp Sync N9515 Unlock Screen
chinnyss said:
same here... up for this....
Click to expand...
Click to collapse
I think unlocking the Boost Mobile is a lost cause. I've tried several other sims and the only codes I've found to show the unlock menu don't work:
1) Alright then please remove the SIM card and try this code ###825*09#,
2) Got the prompt for code? Please enter the code you received,
3) Failed above, try *983*8284# to access the Unlock Menu,
4) Failed above, finally try *983*865625# to access the Unlock Menu.
zte warp elite n9518 rooted but still i can't use MSL reader or alogcat it says in root checker verify root congrats and after rebooting i got to root again please help just need to get SPC and or MSL code
You the MAN! THA KS.
kelvinpacquette said:
zte warp elite n9518 rooted but still i can't use MSL reader or alogcat it says in root checker verify root congrats and after rebooting i got to root again please help just need to get SPC and or MSL code
Click to expand...
Click to collapse
Can u tell me rhat what do i need to enable usb debigging or adb mode ?? I have to connect my zte z982 device to miracle sodtware, but unable to connect because frp lock.
I cant enable usb debugfing
techeligible3322 said:
Can u tell me rhat what do i need to enable usb debigging or adb mode ?? I have to connect my zte z982 device to miracle sodtware, but unable to connect because frp lock.
I cant enable usb debugfing
Click to expand...
Click to collapse
Edit: on the ROMs based on the Japanese 2.2 you need to put the phone into "Engineering Mode" first, by dialling *ZTE*OPENEM# (*983*673636#) -- this action will be confirmed by a quick pop-up. To close this mode, dial *ZTE*CLOSEEM# (*983*2567336#) -- this then prompts whether you want to do a Factory Reset, which you do not have to do (you can simply Back away from this screen).
Dialing the first set of numbers made it possible for me to turn on abd....
Sent from my SM-G550T using Tapatalk
Alright
paigesdavis1996 said:
Edit: on the ROMs based on the Japanese 2.2 you need to put the phone into "Engineering Mode" first, by dialling *ZTE*OPENEM# (*983*673636#) -- this action will be confirmed by a quick pop-up. To close this mode, dial *ZTE*CLOSEEM# (*983*2567336#) -- this then prompts whether you want to do a Factory Reset, which you do not have to do (you can simply Back away from this screen).
Dialing the first set of numbers made it possible for me to turn on abd....
Sent from my SM-G550T using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply
How did you enter / enable adb? I have a 971 and the 2nd code from your site doesn't work, I am able to enable eng. mode
I also tried the connect to computer in control panel and that doesn't do anything either.
Frp locked
Trick
techeligible3322 said:
Thank you for your reply
Click to expand...
Click to collapse
This worked for me and I have the ZTE z blade max thank you
Has this been proven to root the phone yet ? Please leave feedback .
Good News
#Starlord37# said:
This worked for me and I have the ZTE z blade max thank you
Click to expand...
Click to collapse
That's very good to know you are welcome
I haven't had a chance to try it fully yet as I have been trying to root my girlfriends Moto e4 with magisk which I will probably have done by the end of the night and then I plan to tackle my z982 will keep you posted though

Unlock Bootloader fail

hi i have the sms to unlock
i start the unlocktool ...log in and then Your device isnt Support
my device MiMix
gorillalaci said:
hi i have the sms to unlock
i start the unlocktool ...log in and then Your device isnt Support
my device MiMix
Click to expand...
Click to collapse
Might be redundant to question, but you're logging in with the same credentials you used to request the unlock?
On the Smartphone i have log in with Phonenumber and password... The same on My Laptop
gorillalaci said:
On the Smartphone i have log in with Phonenumber and password... The same on My Laptop
Click to expand...
Click to collapse
Did you unlock Developer mode?
Did you enter your Mi account credentials under the Developer settings entry?
To unlock Dev mode, tap on the MIUI Build entry under "About Phone". You have to tap it 7 or 8 times.
Then when you go back out to the Settings menu, under Additional Setttings, you'll see Developer Settings. In the Developers Setting area you'll see Mi Unlock or something like that. Enter your credentials there
Under developers settings ist dont have this settings... I have Under MiAccount My Email My Number Name etc...
gorillalaci said:
Under developers settings ist dont have this settings... I have Under MiAccount My Email My Number Name etc...
Click to expand...
Click to collapse
Have you activated Developers mode?
Aeskulapio said:
Did you unlock Developer mode?
Did you enter your Mi account credentials under the Developer settings entry?
Click to expand...
Click to collapse
I don't see that entry, and I didn't have to do that to unlock my Mi Mix.
To the OP, in about phone, what does it say for Model number and MIUI version?
Yes i have activated developers... And Mi account credentials dont See in developers
I have the same problem. From my understanding you need to apply to unlock your device first in order to have that bind MI account in developer option. I just applied and they said it might take to 10 days to get approved
Bootloader unlocking
I don't want to argue the issue:
here is what I DID.
link here http://en.miui.com/thread-202290-1-1.html
Please make sure you're on official MIUI ROM to unlock
What you should do after received the approval SMS?
1) Settings---> About phone---> MIUI Version (Tap on it to enable developer option).
2) Settings---> Additional settings---> Developer option and bind your approved Mi account under Mi Unlock Status. This works on latest China & Global Stable and Developer ROM. For those who don't see this option please check out next tutorial and unlock in Developer ROM
I hope this helps, because for me it did
Cheers
J
Hi i dont have Under developers Option Mi unlock Status... No Option ist sie...
i Flash the developers cn and found under developers Settings MiUnlock ...
but the same Problem ....i Login to the UnlockTool and YOUR DeVICE ISNT SUPPORT
What can I do ???
gorillalaci said:
i Flash the developers cn and found under developers Settings MiUnlock ...
but the same Problem ....i Login to the UnlockTool and YOUR DeVICE ISNT SUPPORT
What can I do ???
Click to expand...
Click to collapse
So you received the SMS indicating permission to unlock?
And you entered the same credentials (login or MIUI ID number or cell phone number and password) you used to create MIUI account and request unlocking permission?
J
so the Problem is solve ...
i Log in to the Unlock Tool with my phone number ..the curios mistake was my number is ...0151******* my country Germany ...+49
in Germany must i write +49151*******
in the Unlock Tool must write +490151****
Curios but I been happy
I'm in Vietnam. I did by your guidance, but when i use +840989.... to login, it is unable to loging in. Only when i use +84988... it can be loging in.
did you check the device isn't already unlocked, alot with vendor roms have been unlocked already thats how they installed it.

Sim Unlock - Honestly FREE

Hi all.
IMPORTANT S7 T-Mobile and S8 T-Mobile are Qualcomm based and MY METHOD DOES NOT WORK. I WILL UPDATE WHEN/IF IT DOES
UPDATE 27.01.2018
MAGISK........
I am having trouble unlocking on phones with Magisk installed for ROOT
Nothing against Magisk, I personally use and love it. Feel free to install this AFTER UNLOCK
I'm just having trouble with the unlock using Magisk.
I am offering a free unlock via
I will still gladly accept any donations that come my way via PayPal ([email protected])
But DONATION is 100% OPTIONAL
All i ask is RESPECT and PATIENCE. (if these are not given then I may CHOOSE not to help you)
Remember this is taking time away from my wife and family to help YOU!
This is a FREE remote unlock service. AT YOUR OWN RISK.
No, I will not share my method..... as it could get patched by Samsung.
Here we go........
SEE CURRENT SUPPORTED MODELS AND FIRMWARES HERE
F.A.Q
Q. What if my IMEI is bad or blacklisted?
A. There are a few times of blacklist... T-Mobile seems to block INTERNAL only if non payment. Others will block if non payment or lost/stolen.
This does not effect SIM unlock, I can do it regardless.... However, you WILL NOT GET NETWORK SIGNAL IF BLOCKED
Check here for T-mobile https://www.t-mobile.com/verifyIMEI.aspx and also here for all models http://imei24.com/blacklist_check/
If you are not sure ask first!
Q. Can you change/repair my IMEI?
A. HELL NO. This is not only against XDA Rules but it is illegal in most countries, including mine.
Q. Is this really free?
A. Yes, although I do hope for a donation for my time and effort
Q. When are you available?
A. See below.
Q. Can we get on with it all ready?
A. Yes!
Remote Sim Unlock Preparation
Contact
Please be considerate of my time zone this it GMT +03 (UTC +13), check here NZDT https://www.timeanddate.com/time/zones/nzdt I am usually available after work 5PM until 8PM.
I am also available some weekends. Leave me a message on hangouts here with [email protected] and i will get back to you ASAP.
Please contact me when you are ready after reading below. Contact [email protected] via Google Hangouts.
If you do not have a reply within 24 hours then please email me with your gmail address on [email protected] and I will add you to hangouts.
Google Hangouts is needed so you can follow directions as I unlock your device. Everyone with a Google accounts has Google Hangouts.
You can access it via hangouts.google.com
Phone Settings ALL Models
Disable FRP by enabling OEM UNLOCK
http://techbeasts.com/how-enable-oem-unlock-android-lollipop-marshmallow/
Enable USB debugging
https://forum.xda-developers.com/fire-phone/general/guide-enable-usb-debugging-setup-t2859697
Revoke USB authorization (if applicable)
Developer Settings > Revoke USB authorization
GSM Only
Phone dialer > *#0808# > USB = AP
Phone dialer > *#0808# > USB SETTINGS = DM + ACM/MODMEM + ADB (note, will say ACM or MODEM)
If and only IF the above doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet)
SPRINT Only
Phone dialer > ##3424# >Qualcomm USB settings > DM + ADB + Modem
If the above asks for MSL or doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet) then we can get MSL to enable the above if you need MSL
For those that don't know... the 5th to last digit in the firmware is the BOOTLOADER (BL) version. YOU CAN'T GO BACK!!
i.e G920TUVU5EQC2 the BL version is 5 so you can't flash anything less than BL version 5
PC
You will need a Windows PC for the software. Please ensure you have Windows 7 or newer
Windows Vista and XP are NOT RECOMMENDED (for anything lol).
Please download FlexiHub http://www.eltima.com/wiki/user-guides/flexihub-windows/installation.html and install on your PC.
Please reboot after install.
Please create a FREE flexihub account here https://flexihub.eltima.com/user/registration/ AFTER ENTER DETAILS, YOU WILL SEE A PAYMENT PAGE... CLOSE WINDOW NOW. FREE ACCOUNT ALREADY CREATED
Or I have a few accounts if you wish to use one just let me know.
Please have FlexiHub open and logged in.
Unlocking Process
When you have contacted me and I have replied that we are ready you may proceed to:
Open flexihub and log in to your account
DO NOT SEND COM PORT. THIS IS USELESS TO ME ALONE
If needed click 'UNLOCK' on the phone's driver so it can be accessed (i.e Samsung_Android OR Gadget_Serial OR MSMxxxx)
Right click on your phone's driver in flexihub(i.e Samsung_Android OR Gadget_Serial OR MSMxxxx) and click send invite.
Type in [email protected] and click OK.
I will connect to the device and proceed from there.
Please watch phone for USB Authorization prompt.
Check the box then press OK.
I will disconnect and reconnect as required (using FlexiHub).
Watch phone Screen for SU (ROOT) prompt and press GRANT.
All you need to do is watch the phone for USB Authorization and ROOT grant.
Please follow the instructions I send via Google Hangouts
After we are finished you can return your device settings to as they were and you can remove FlexiHub from PC.
Please kindly donate via PayPal to [email protected] (once again 100% optional)
Im still doing this been very few at the moment :/
stifilz said:
Im still doing this been very few at the moment :/
Click to expand...
Click to collapse
can it be done if android nougat is installed ? stock rom on it
T-Mobile yes, sprint no, before dec2016 FW.... Easy to Downgrade. Anything else needs combination file. Contact ad per OP and LMK the model and I'll let you know what you need
you really did it, it works like a charm, tryed another carrier and it's working. a huge thank you for your time and effort
i will consider to donate to you
hello, my Samsung S6 Edge phone model is SM-925T (T-Mobile), I can't use any network carrier in Indonesia. Can it be unlocked ?
my phone use latest firmware, 7.0.
Hi,
I have a SMG935T do i have to root to unlock ?
jayfizze said:
Hi,
I have a SMG935T do i have to root to unlock ?
Click to expand...
Click to collapse
Nope, please contact me via hangouts
I have Note 5 n9208 on nougat, what do I need to do to prepare for this?
I have s6 edge SM-G925F rooted globe lock philippines is it possible to be unlock?
smdc19812011 said:
I have Note 5 n9208 on nougat, what do I need to do to prepare for this?
Click to expand...
Click to collapse
Probably not without combination file. Contact me on hangouts as per first post.
rjzserrot said:
I have s6 edge SM-G925F rooted globe lock philippines is it possible to be unlock?
Click to expand...
Click to collapse
Yes, first post
hi sir I have and S6 Edge SM-G925F not rooted smart lock philippines is it possible to unlock my phone? thanks!
lervzz said:
hi sir I have and S6 Edge SM-G925F not rooted smart lock philippines is it possible to unlock my phone? thanks!
Click to expand...
Click to collapse
Yes with combination. Contact via first thread
up for this legit!! thank you for your time mate. ill donate a soon as i fix my paypal =) thanks again
Bump.
Still doing this.
Few changes made to thread for clarity,
Mainly........
SEE CURRENT SUPPORTED MODELS AND FIRMWARES HERE
S6 Edge Sprint
My sprint s6 edge baseband version is G925PVPU4CPL3, as this does not match with the document file you shared, kindly tell me sim unlock is possible?
fahad16876 said:
My sprint s6 edge baseband version is G925PVPU4CPL3, as this does not match with the document file you shared, kindly tell me sim unlock is possible?
Click to expand...
Click to collapse
It says or older! So yes I can, you'll need root as per link
I have a Samsung Galaxy S6 model SM-G920R7 are you able to unlock the sim?
quino73 said:
I have a Samsung Galaxy S6 model SM-G920R7 are you able to unlock the sim?
Click to expand...
Click to collapse
No
Can you do T-mobile S7 Edge yet?!!

Sim Unlock - Honestly FREE

Hi all.
IMPORTANT S7 T-Mobile and S8 T-Mobile are Qualcomm based and MY METHOD DOES NOT WORK. I WILL UPDATE WHEN/IF IT DOES
UPDATE 27.01.2018
MAGISK........
I am having trouble unlocking on phones with Magisk installed for ROOT
Nothing against Magisk, I personally use and love it. Feel free to install this AFTER UNLOCK
I'm just having trouble with the unlock using Magisk.
I am offering a free unlock via
I will still gladly accept any donations that come my way via PayPal ([email protected])
But DONATION is 100% OPTIONAL
All i ask is RESPECT and PATIENCE. (if these are not given then I may CHOOSE not to help you)
Remember this is taking time away from my wife and family to help YOU!
This is a FREE remote unlock service. AT YOUR OWN RISK.
No, I will not share my method..... as it could get patched by Samsung.
Here we go........
SEE CURRENT SUPPORTED MODELS AND FIRMWARES HERE
F.A.Q
Q. What if my IMEI is bad or blacklisted?
A. There are a few times of blacklist... T-Mobile seems to block INTERNAL only if non payment. Others will block if non payment or lost/stolen.
This does not effect SIM unlock, I can do it regardless.... However, you WILL NOT GET NETWORK SIGNAL IF BLOCKED
Check here for T-mobile https://www.t-mobile.com/verifyIMEI.aspx and also here for all models http://imei24.com/blacklist_check/
If you are not sure ask first!
Q. Can you change/repair my IMEI?
A. HELL NO. This is not only against XDA Rules but it is illegal in most countries, including mine.
Q. Is this really free?
A. Yes, although I do hope for a donation for my time and effort
Q. When are you available?
A. See below.
Q. Can we get on with it all ready?
A. Yes!
Remote Sim Unlock Preparation
Contact
Please be considerate of my time zone this it GMT +03 (UTC +13), check here NZDT https://www.timeanddate.com/time/zones/nzdt I am usually available after work 5PM until 8PM.
I am also available some weekends. Leave me a message on hangouts here with [email protected] and i will get back to you ASAP.
Please contact me when you are ready after reading below. Contact [email protected] via Google Hangouts.
If you do not have a reply within 24 hours then please email me with your gmail address on [email protected] and I will add you to hangouts.
Google Hangouts is needed so you can follow directions as I unlock your device. Everyone with a Google accounts has Google Hangouts.
You can access it via hangouts.google.com
Phone Settings ALL Models
Disable FRP by enabling OEM UNLOCK
http://techbeasts.com/how-enable-oem-unlock-android-lollipop-marshmallow/
Enable USB debugging
https://forum.xda-developers.com/fire-phone/general/guide-enable-usb-debugging-setup-t2859697
Revoke USB authorization (if applicable)
Developer Settings > Revoke USB authorization
GSM Only
Phone dialer > *#0808# > USB = AP
Phone dialer > *#0808# > USB SETTINGS = DM + ACM/MODMEM + ADB (note, will say ACM or MODEM)
If and only IF the above doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet)
SPRINT Only
Phone dialer > ##3424# >Qualcomm USB settings > DM + ADB + Modem
If the above asks for MSL or doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet) then we can get MSL to enable the above if you need MSL
For those that don't know... the 5th to last digit in the firmware is the BOOTLOADER (BL) version. YOU CAN'T GO BACK!!
i.e G920TUVU5EQC2 the BL version is 5 so you can't flash anything less than BL version 5
PC
You will need a Windows PC for the software. Please ensure you have Windows 7 or newer
Windows Vista and XP are NOT RECOMMENDED (for anything lol).
Please download FlexiHub http://www.eltima.com/wiki/user-guides/flexihub-windows/installation.html and install on your PC.
Please reboot after install.
Please create a FREE flexihub account here https://flexihub.eltima.com/user/registration/ AFTER ENTER DETAILS, YOU WILL SEE A PAYMENT PAGE... CLOSE WINDOW NOW. FREE ACCOUNT ALREADY CREATED
Or I have a few accounts if you wish to use one just let me know.
Please have FlexiHub open and logged in.
Unlocking Process
When you have contacted me and I have replied that we are ready you may proceed to:
Open flexihub and log in to your account
DO NOT SEND COM PORT. THIS IS USELESS TO ME ALONE
If needed click 'UNLOCK' on the phone's driver so it can be accessed (i.e Samsung_Android OR Gadget_Serial OR MSMxxxx)
Right click on your phone's driver in flexihub(i.e Samsung_Android OR Gadget_Serial OR MSMxxxx) and click send invite.
Type in [email protected] and click OK.
I will connect to the device and proceed from there.
Please watch phone for USB Authorization prompt.
Check the box then press OK.
I will disconnect and reconnect as required (using FlexiHub).
Watch phone Screen for SU (ROOT) prompt and press GRANT.
All you need to do is watch the phone for USB Authorization and ROOT grant.
Please follow the instructions I send via Google Hangouts
After we are finished you can return your device settings to as they were and you can remove FlexiHub from PC.
Please kindly donate via PayPal to [email protected] (once again 100% optional)
I saw your old thread was locked due to requiring donations. Good on you for offering it free to the public again! It's good to help people, but family is pretty important, and although it was against XDA rules, there's no shame in asking for compensation for your work. Good luck!
@stifilz I'll be hitting you up sometime soon for round 2 on my phone, heh.
Im still doing this been very few at the moment :/
I read the op but wanted to know if you have tried cdma phone (I have the sm-n920p
Samsung Galaxy S5 (SM-G900P)
Thanks for offering this service for free again.
I have a Sprint Samsung Galaxy S5 (SM-G900P) with G900PVPU3CPCA baseband. I'm wondering if you can help unlock this.
Thanks
cafedeluv said:
Thanks for offering this service for free again.
I have a Sprint Samsung Galaxy S5 (SM-G900P) with G900PVPU3CPCA baseband. I'm wondering if you can help unlock this.
Thanks
Click to expand...
Click to collapse
Yes. Follow OP
Bad luck
Thanks a lot for giving me such valuable time. But my luck doesn't favor me. ????
my n9208 smart locked is now unlocked because of you bro, thank you so much!
hi! i have SM-N920T locked after flashing custom rom. Can you help me?
Thanks OP. This really works very fast and effective.
Bump.
Still doing this.
Few changes made to thread for clarity,
Mainly........
SEE CURRENT SUPPORTED MODELS AND FIRMWARES HERE
Did u get your sprint phone unlocked
Lovebug18 said:
Did u get your sprint phone unlocked
Click to expand...
Click to collapse
????
I can do them, yes. Read first post
Unlock note 8
Hi, Can you help unlock Tmobile At&T note 8? I really want to unlock this phone.Thanks.
kobeamox said:
Hi, Can you help unlock Tmobile At&T note 8? I really want to unlock this phone.Thanks.
Click to expand...
Click to collapse
Not supported
stifilz said:
Not supported
Click to expand...
Click to collapse
ok, do you know if it's possible at all, like are some people in the forumnm capable of doing it? I looked everywhere, but could not find a reliable answer.
kobeamox said:
ok, do you know if it's possible at all, like are some people in the forumnm capable of doing it? I looked everywhere, but could not find a reliable answer.
Click to expand...
Click to collapse
It is possible look on ebay
Do you support Sprint Note 3? SM-900P
Nope. 2013 does

How to use Samsung pay India in the USA version of GS8

I've got the permanently unlocked T-mobile US version (Snapdragon 835) of the Galaxy S8. I was using the Samsung pay in the US but that doesn't work for Indian cards in India, probably due to region locks. Is there any way by which I can use the Samsung pay in India on my unlocked GS8 USA version ? Please help.
Thanks in advance.
Hi could you find any work around for this?
Dip8614 said:
I've got the permanently unlocked T-mobile US version (Snapdragon 835) of the Galaxy S8. I was using the Samsung pay in the US but that doesn't work for Indian cards in India, probably due to region locks. Is there any way by which I can use the Samsung pay in India on my unlocked GS8 USA version ? Please help.
Thanks in advance.
Click to expand...
Click to collapse
That might not be possible as you'd have to be running a supported firmware with localised csc
Dip8614 said:
I've got the permanently unlocked T-mobile US version (Snapdragon 835) of the Galaxy S8. I was using the Samsung pay in the US but that doesn't work for Indian cards in India, probably due to region locks. Is there any way by which I can use the Samsung pay in India on my unlocked GS8 USA version ? Please help.
Thanks in advance.
Click to expand...
Click to collapse
The Samsung Pay will work for standard card types like MasterCard, Visa and AMEX as long as your bank supports it. But local card types like Maestro, Rupay, Paytm or any other won't work. I have Unlocked Australian S8 and I have already linked my CitiBank Credit card and ICICI Bank Debit card.
Thanks
Reset your phone and then boot while an Indian sim is in your phone. This will change the CSC to India but I'm not sure if you'll get updates!
venki5star said:
The Samsung Pay will work for standard card types like MasterCard, Visa and AMEX as long as your bank supports it. But local card types like Maestro, Rupay, Paytm or any other won't work. I have Unlocked Australian S8 and I have already linked my CitiBank Credit card and ICICI Bank Debit card.
Thanks
Click to expand...
Click to collapse
Hi Venki,
I have a Samsung Gear S3 bluetooth version got it from USA where i was trying to add the credit card. Same as you i have ICICI Bank Debit and Credit card which i was able to add successfully. But I have an CitiBank credit card for which i am unable to add. My feeling is while the filling of card details it asks for 5 digit postal code which is as per US but for india its 6 digit (not sure how it worked for ICICI though ), So will you be able to help me how you were able to add and is there a workaround that i can use to solve this issue.
Thanks and Regards
Arun A V said:
Hi Venki,
I have a Samsung Gear S3 bluetooth version got it from USA where i was trying to add the credit card. Same as you i have ICICI Bank Debit and Credit card which i was able to add successfully. But I have an CitiBank credit card for which i am unable to add. My feeling is while the filling of card details it asks for 5 digit postal code which is as per US but for india its 6 digit (not sure how it worked for ICICI though ), So will you be able to help me how you were able to add and is there a workaround that i can use to solve this issue.
Thanks and Regards
Click to expand...
Click to collapse
Hi Arun
I do have Gear S3, but I don't use the Samsung Pay on gear. The reason you couldn't add could be because, Gear S3 Samsung Pay is different app (light weight) than the one in the Galaxy Devices. I don't know any workarounds. Sorry.
Thanks
Dip8614 said:
I've got the permanently unlocked T-mobile US version (Snapdragon 835) of the Galaxy S8. I was using the Samsung pay in the US but that doesn't work for Indian cards in India, probably due to region locks. Is there any way by which I can use the Samsung pay in India on my unlocked GS8 USA version ? Please help.
Thanks in advance.
Click to expand...
Click to collapse
you should flash rom for your current region (India) and do not root it. then samsung pay will work well
alfonsocoralles said:
you should flash rom for your current region (India) and do not root it. then samsung pay will work well
Click to expand...
Click to collapse
Can I flash Indian ROM into the USA version of GS8? Would it support?
Arun A V said:
Hi Venki,
I have a Samsung Gear S3 bluetooth version got it from USA where i was trying to add the credit card. Same as you i have ICICI Bank Debit and Credit card which i was able to add successfully. But I have an CitiBank credit card for which i am unable to add. My feeling is while the filling of card details it asks for 5 digit postal code which is as per US but for india its 6 digit (not sure how it worked for ICICI though ), So will you be able to help me how you were able to add and is there a workaround that i can use to solve this issue.
Thanks and Regards
Click to expand...
Click to collapse
Hello @Arun A V
did you ever get this to work? I have the same issue with an Indian Citibank credit card. HDFC debit and credit added just fine.
i am having samsung galaxy 8 + which is purchased in india. when i sent this mobile to my son who is in USA and his service provider inUSA is AT&T.But unfortunately the mobile is not able to make calls or receive call in his AT&T SIM.Please help
Knox tripped
BiggPharma said:
This is the method I used to change the CSC code on my SM-R760 to an Australian code with a view to setting up Samsung Pay. It took a little hunting around the forums to find all of the information, plus I ran into a few things while I was doing it that didn't seemed to be mentioned elsewhere so I thought I would summarise it all below for us noobs.
All credit to the experts, in particular @adfree
WHAT YOU WILL NEED:
------------------------
NetOdin3
https://forum.xda-developers.com/gear-s3/development/rom-samsung-gear-s3-sm-r760-t3588062
Combination Firmware
https://forum.xda-developers.com/showpost.php?p=74600026&postcount=26
Your current stock firmware (in my instance, R760XXU2BQC5)
https://forum.xda-developers.com/gear-s3/development/rom-samsung-gear-s3-sm-r760-t3588062
Your CSC code
https://forum.xda-developers.com/showthread.php?t=787163
A PC with a WiFi connection
INSTRUCTIONS:
----------------
1. Check reactivation lock is off
- On your phone, go to Samsung Gear App
- Go to Setttings Tab, choose "Find my Gear"
- Make sure Reactivation Lock is off
2. Connect your watch to your PC
- Hold down the home/power button until you see the "rebooting" screen
- Release the home/power button then quickly press it three times to bring up the boot menu
- Quick press the home/power button to cycle through the menu to "Download (wireless)"
- Long press the home/button to confirm the menu selection
- The phone will then go into WPS mode
- Double press the home/power button to change to AP mode
- On your PC, enable WiFi and connect to the access point on you watch.
NOTE: Until you successfully connect to NetOdin, your watch may display red text stating "Connection Timeout" - this is OK
- Open up NetOdin. You should now be connected to your watch (you should see the IP in the NetOdin window and "Connected to xx.xx.xx.xx" on your watch face.
NOTE: I had to disable Windows Defender public firewall temporarily for NetOdin to work properly
3. Flash combination firmware
- Load the unzipped .tar.md5 file into the "AP" box of NetOdin, wait for it to finish checking then click "Start". This should take about 10 minutes to complete after clicking "Start".
NOTE: I had left "Automatic reboot" ticked in Odin, so once it completed the watch restarted. No issue, except had to go through step 2 to reconnect the watch to the PC before proceeding to the next step
4. Flash CSC file from stock firmware
- Load the unzipped CSC_xxx.tar.md5 file into the "CSC" box of NetOdin, wait for it to finish checking then click "Start". This should take about 1-2 minutes to complete after clicking "Start".
5. Factory reset
- In your Gear, go to Settings > Gear Info > Reset Gear > Confirm
NOTE: I got a warning at this stage that Reactivation Lock was on. Don't know why I got this message as I had definitely turned it off in step 1. I ignored it (no guts, no glory!) and was fine. Your mileage may vary
6. Set CSC code
- In the Gear, go to the Tizen Keystring app
NOTE: screenshots of what your interface will look like https://forum.xda-developers.com/showpost.php?p=74591475&postcount=13)
- Type in the following code exactly: *#272*719434266344#
- You will be taken to a list of CSC codes that you can scroll through. Find the code you want to change to and select it. I used "XSA".
7. Reflash complete current stock ROM
- Load the unzipped CSC_xxx.tar.md5 file into the "CSC" box of NetOdin, wait for it to finish checking.
- Load the unzipped AP_xxx.tar.md5 file into the "AP" box of NetOdin, wait for it to finish checking.
- Load the unzipped BL_xxx.tar.md5 file into the "BL" box of NetOdin, wait for it to finish checking.
- Click "Start". This should take about 15 minutes to complete after clicking "OK".
You are done!
After this, my Gear picked up the OTA update to Tizen 3.0.0.1
So after all of this effort, NAB doesn't currently support Samsung Pay, so I can't 100% confirm this will work, but everything I've read says it should.
Click to expand...
Click to collapse
I got Gear S3 delivered from Amazon yesterday in India since I was desperate about SPay I tried and followed above method to change CSC and enable SPay. Everything went smooth but now it says "unauthorized modifications have been made to this device". I guess Knox has been tripped. I don't know how, But Samsung Health is working fine.
Now I have requested for a replacement of the same device from Amazon. Can anybody let me know the safest method to enable spay on Indian Gear Device?
Galaxy Gear S3 Frontier
Was in Tizen 3 and got updated to Tizen 4 after combi flash and CSC change.
Gear Model: R760.
Can anybody let me know the safest method to enable spay on Indian Gear Device?

Categories

Resources