Related
We were trying to install a kernel for cm 6 and after rebooting the phone bootloops. We tried to go into recovery but the phone still bootloops
Any other way to access the recovery / recover from this bootloop
tips and replies would be greatly appreciated thanks!
bump anyone?
1. Go to Download mode, connect USB cable
2. Start Odin, load spica_jc3.ops as OPS file and anything flashable- kernel, backup4odin, rooting package, firmware
3. Except for default flashing parameters check also Debug ONLY and Parameter Clear
4. Flash
dudin03 said:
bump anyone?
Click to expand...
Click to collapse
Does anyone engaged in the development Samsung GT-i7500 GALAXY.
Phone is OK performance, I do not know why no one interested in the development of ROM. The current ROM that I use is 2.2.1? Is not it just the phone challenge for programmers?
Please let me some answers!
Thank you very much!
ph.miki said:
Does anyone engaged in the development Samsung GT-i7500 GALAXY.
Phone is OK performance, I do not know why no one interested in the development of ROM. The current ROM that I use is 2.2.1? Is not it just the phone challenge for programmers?
Please let me some answers!
Thank you very much!
Click to expand...
Click to collapse
We started making optimized Froyo for Spica- look for SpicagenMod on samdroid.net.
gen_scheisskopf said:
We started making optimized Froyo for Spica- look for SpicagenMod on samdroid.net.
Click to expand...
Click to collapse
I looked at the web, there's nothing new, but one question!
If I can install the same ROM as the I5700? And how?
Thank you
I'm sorry, I can't seem to find any kernels that say whether they do or do not have loop device support. I'm trying to play around with ubuntu and am stuck!
Thanks
Nick
NJDubois said:
I'm sorry, I can't seem to find any kernels that say whether they do or do not have loop device support. I'm trying to play around with ubuntu and am stuck!
Thanks
Nick
Click to expand...
Click to collapse
What's your device ? The best Kernel for N900 is "Halaszk"
Hey, thanks for the reply!
I have the 900T. Going to look into Halaszk now!
Thanks!
Hi Guys, I bought a ZGPAX S79 smartwatch and mad a scambles of flashing, I can get other roms to flash on it but no touchscreen working. Is there any chance someone has a ROM for the S79 ??
Adyb386d said:
Hi Guys, I bought a ZGPAX S79 smartwatch and mad a scambles of flashing, I can get other roms to flash on it but no touchscreen working. Is there any chance someone has a ROM for the S79 ??
Click to expand...
Click to collapse
Hi did you find the ROM.
I bougth this swatch and I'm interested to change the firmware and the face watches coul you plese help me?
THX and reagrds
No Joy, other firmware will flash but non responsive screen, I actually need a rom dump to get my watch back to normal if anyone could help.
Adyb386d said:
No Joy, other firmware will flash but non responsive screen, I actually need a rom dump to get my watch back to normal if anyone could help.
Click to expand...
Click to collapse
OK if you need I can give you my backup
That would be great at least I could get it up and running again. :good:
Adyb386d said:
That would be great at least I could get it up and running again. :good:
Click to expand...
Click to collapse
Here the file. I
IF you like it thx me.
DO you have the code for the hidden menu like engineering mode ecc....
I tried many code but whitout success.
THX and regards
P.S.
Golem, you can add this Firmware to your data base
THE FILE.....
Here the file. I
IF you like it thx me.
DO you have the code for the hidden menu like engineering mode ecc....
I tried many code but whitout success.
THX and regards
P.S.
Golem, you can add this Firmware to your data base[/QUOTE]
slowslow9 said:
Here the file. I
IF you like it thx me.
DO you have the code for the hidden menu like engineering mode ecc....
I tried many code but whitout success.
THX and regards
P.S.
Golem, you can add this Firmware to your data base
Click to expand...
Click to collapse
[/QUOTE]
You my friend are a superstar, watch up and running again. Many thanks.
You my friend are a superstar, watch up and running again. Many thanks.[/QUOTE]
Ok good.
Do you have the code for the secret menu like engeneering mode ecc?
THX
I'm sorry I don't maybe someone out there could help out. Have you tried to change the watch face on this particular watch ??
Adyb386d said:
I'm sorry I don't maybe someone out there could help out. Have you tried to change the watch face on this particular watch ??
Click to expand...
Click to collapse
Yes see the picture.
I have modify one found here
THX
slowslow9 said:
Here the file. I
IF you like it thx me.
DO you have the code for the hidden menu like engineering mode ecc....
I tried many code but whitout success.
THX and regards
P.S.
Golem, you can add this Firmware to your data base
Click to expand...
Click to collapse
This firmware works:good:! Thank You sooooo much! :highfive:
Robalboss said:
This firmware works:good:! Thank You sooooo much! :highfive:
Click to expand...
Click to collapse
Happy to know that:good:
Could youo please share also your firmware?
THx a lot
slowslow9 said:
Happy to know that:good:
Could youo please share also your firmware?
THx a lot
Click to expand...
Click to collapse
Yes, there it is - click to download zip archive.
Golem, please add this firmware to collection as "Hykker Chrono S79 Original by Robalo".
Dear slowslow9, unfortunately on 'Your' fimware Bluetooth audio streaming still doesn't work properly (but the software is better overall). It means I will return my device.
Robalboss said:
Yes, there it is - click to download zip archive.
Golem, please add this firmware to collection as "Hykker Chrono S79 Original by Robalo".
Dear slowslow9, unfortunately on 'Your' fimware Bluetooth audio streaming still doesn't work properly (but the software is better overall). It means I will return my device.
Click to expand...
Click to collapse
OK thx maybe you could try to change the setting in the engineering menu...
slowslow9 said:
OK thx maybe you could try to change the setting in the engineering menu...
Click to expand...
Click to collapse
You mean changing Bluetooth mode from NORMAL to PTS, yes?
It doesn't work, as PTS is only for testing.
Anyway, device returned. Thanks for Your help slowslow9. You're good :highfive:
Robalboss said:
You mean changing Bluetooth mode from NORMAL to PTS, yes?
It doesn't work, as PTS is only for testing.
Anyway, device returned. Thanks for Your help slowslow9. You're good :highfive:
Click to expand...
Click to collapse
Robalboss, no I mean changing the audio paramiters:good:
Maybe can improve the sound
slowslow9 said:
Robalboss, no I mean changing the audio paramiters:good:
Maybe can improve the sound
Click to expand...
Click to collapse
Please send me photo of these settings and let me know what is engineer code.
Maybe I will get another S79 and I will check these settings. Thanks!
Robalboss said:
Please send me photo of these settings and let me know what is engineer code.
Maybe I will get another S79 and I will check these settings. Thanks!
Click to expand...
Click to collapse
Engineering code, give you the possibility to access to a special menu where to change (at your risk) the watch parameters
ciao
Yes, I know what is it but please send information how to enter engineer mode (I think code will be the same on all branded S79 devices). And please remember about photo as I don't have this device anymore.
Thank You!
Welcome everyone!
This thread has been created for extreme newbies/noobs and for their benefit. Not only noobs, but everyone is free to post questions and also give answers to those questions. Any type of question is allowed as long as it is related about the device. No off-topic discussions are allowed!
Hit Thanks if I Helped You!
Regards,
PoseidonKing
My Phone is Bricked can you help me to solve this??
tejas.g said:
My Phone is Bricked can you help me to solve this??
Click to expand...
Click to collapse
Are you sure it is bricked? If yes, what kind of a brick do you think it is? Soft brick/Hard Brick? Post your issue in detail for members to analyze it.
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
PoseidonKing said:
Are you sure it is bricked? If yes, what kind of a brick do you think it is? Soft brick/Hard Brick? Post your issue in detail for members to analyze it.
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
Click to expand...
Click to collapse
When I try to turn on its just showing the Logo Of Lava!
I don't know it's Soft or Hard it happened when my brother was trying to flash Cyanogen Rom and he Forgot to wipe cache and Dalvik Option!
tejas.g said:
When I try to turn on its just showing the Logo Of Lava!
I don't know it's Soft or Hard it happened when my brother was trying to flash Cyanogen Rom and he Forgot to wipe cache and Dalvik Option!
Click to expand...
Click to collapse
If it shows the Lava logo, it is soft-bricked. It can be recovered by flashing stock ROM or if available, stock firmware. Hard-bricked devices are almost impossible to recover. When a device is hardbricked, it dows not react to any actions like pressing power button to start, etc.
I'll do some research and get back to you with a better solution. Or if you're in a hurry, just search for the term,"Soft-bricked Lava Pixel V1".
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
PoseidonKing said:
If it shows the Lava logo, it is soft-bricked. It can be recovered by flashing stock ROM or if available, stock firmware. Hard-bricked devices are almost impossible to recover. When a device is hardbricked, it dows not react to any actions like pressing power button to start, etc.
I'll do some research and get back to you with a better solution. Or if you're in a hurry, just search for the term,"Soft-bricked Lava Pixel V1".
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
Click to expand...
Click to collapse
Thanks Bro!But Device Isn't Recognising To Flash Stock ROM!
And Please Find Me A Solution!
tejas.g said:
Thanks Bro!But Device Isn't Recognising To Flash Stock ROM!
And Please Find Me A Solution!
Click to expand...
Click to collapse
I made this for you HERE.
Do tell me when your Problem is solved.
Enjoy.
Dark❶ said:
I made this for you HERE.
Do tell me when your Problem is solved.
Enjoy.
Click to expand...
Click to collapse
Will try and tell you
Hi any nougat rom lava pixel v1 ??
This rom are working with lava pixel v1 https://forum.xda-developers.com/cr...pment/rom-lineage-14-1-sprout-t3610417/page10
Can I flash GAPPS after flashing a custom ROM?
hello i am in trouble my lava pixel v1 notification bar and home button or recent button also developer option not working it shows that the developers option are not available for this user and i think by mistakenly my mobile reboot then it switched to owner to guest mode and i cant see the user change function in setting and also at the notification bar have blue user change icon i cant touch that also please help me fast i want to backup my data and transfer to new mobile so please help
Lutyrx said:
hello i am in trouble my lava pixel v1 notification bar and home button or recent button also developer option not working it shows that the developers option are not available for this user and i think by mistakenly my mobile reboot then it switched to owner to guest mode and i cant see the user change function in setting and also at the notification bar have blue user change icon i cant touch that also please help me fast i want to backup my data and transfer to new mobile so please help
Click to expand...
Click to collapse
Hi!!
Did you manipulated system partition in anyway before this incidence , especially ".prop" files?
Did you ROOT the phone ? (SuperSU / Magisk)
Did you flash Custom Recovery on the phone ? (TWRP)
What type of data backup ?
App Data OR just files like audio , video , documents , ...etc... ?
We all need more Info?????
Best regards :good:
[Can't download error]
Hey, guys. I've attempted to download Pubg mobile on my phone Huawei p30 several times but end up encountering "can't download app" (error code: 495). Anyone knows what it is and how to fix this error. Help me, please!!!
I really need the Splash Screen from the J5 510FN
It would be awesome if u can give me one =)
Or maybe an other solution to this question.
Maybe Tools or so
DarkRoms said:
I really need the Splash Screen from the J5 510FN
It would be awesome if u can give me one =)
Or maybe an other solution to this question.
Maybe Tools or so
Click to expand...
Click to collapse
The best solution would be to install the ROM stock again to recover what you order
Suuzuaw said:
The best solution would be to install the ROM stock again to recover what you order
Click to expand...
Click to collapse
What do you mean?
Param.bin is missing on The J5
And And there is no Splash Screen to find.
No Splash.img file or something like this.
If you know any Other solutions please Help me
And thank you for your answer
DarkRoms said:
What do you mean?
Param.bin is missing on The J5
And And there is no Splash Screen to find.
No Splash.img file or something like this.
If you know any Other solutions please Help me
And thank you for your answer
Click to expand...
Click to collapse
Hi
Did u find any solution ? Me also trying but cant find param.bin.