I got a g935v from China. It came preloaded with g9350 china rom. I need google so I tried flashing it back to g935v. I got unsupported dev_type but funny enough the phone boots to the verizon rom. try my malaysia sim card and i got the "sim card is not from verizon" and no reception. i tried to flash to the U rom, odin failed and now that my phone is bricked (same problem unsupported dev type). tried flashing back to g9350 (china and hong kong rom) nothing worked. i would really appreciate if anyone could guide me on what to do next.
my odin everytime i flash
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> persist.img.ext4
<ID:0/006> userdata.img.ext4
<ID:0/006> meta-data/
<ID:0/006> meta-data/1.mf
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Related
Excuse Me, I have a Note 4, and want to change the Rom from N910S (Korea) to N910U (HK).
I tried to use Odin to directly install N910U Rom but fail, with follows error message:
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help, thousand Thanks!
kwok_h said:
Excuse Me, I have a Note 4, and want to change the Rom from N910S (Korea) to N910U (HK).
I tried to use Odin to directly install N910U Rom but fail, with follows error message:
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help, thousand Thanks!
Click to expand...
Click to collapse
Hi mate
just have finded out what was giving the error.
I've unchecked the reactivation lock under security tab on the android Kitkat... Now can flash whatever I wanted with odin.
Sent From Out of Nowhere
N910s
Do you mean you can flash over 910s an 910u rom ? ....
I tried to root my note 4(n-910f) but by using a wrong file or just not understanding how it all works i guess i messed something up. Tried to revert, got a md5 from Sammobile(uk version) and now im getting this.
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Write)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any suggestions would help.
ps.tried restarting pc ,original cable, other usb hole.
This helped me. First one saved my phone and my wallet, second one just for some trouble shooting too.
1. https://www.sammobile.com/forum/showthread.php?t=30686
2. https://forum.xda-developers.com/showthread.php?t=2716151
Hello all !
I'm sorry but i m stuck with my phone.
It's a A5 2017 which was flash with lineageOS with twrp.
I'm trying to install a stock rom downloaded from sammobile A520FXXU6CHR1_A520FOXA6CRH1_XEF (france).
I'm using odin V3.13
FRP lock is OFF
i m using original samsung cable
When i m trying to flash only AP it fail on recovery.img with kernel rev. check fail device:4 binary:3 on the screen.
I try with several version of odin.
Is everyone have some tips to recover my device .
Thank you so much
Julien
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 4229 M
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 4229 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Resolved by using fenrir.
cozo31 said:
Hello all !
I'm sorry but i m stuck with my phone.
It's a A5 2017 which was flash with lineageOS with twrp.
I'm trying to install a stock rom downloaded from sammobile A520FXXU6CHR1_A520FOXA6CRH1_XEF (france).
I'm using odin V3.13
FRP lock is OFF
i m using original samsung cable
When i m trying to flash only AP it fail on recovery.img with kernel rev. check fail device:4 binary:3 on the screen.
I try with several version of odin.
Is everyone have some tips to recover my device .
Thank you so much
Julien
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 4229 M
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 4229 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Click to expand...
Click to collapse
Tried rooting this device (SM-G950F, 3 UK carrier logo), USB Debugging On, OEM Unlock On, odin successfully installed TWRP 3.3.1-1. Device restarted and since then does not go beyond Samsung logo. Can't go into recovery, can't shutdown the phone. Only goes into download mode. Googled and found a way to flash AQF7 BL, did flash it successfully with odin but still the same stuck at boot screen.
Here is what I tried so far;
Tried flashing TWRP older version 3.1.1-2
Tried flashing AQF7 Bootloader (BL_G950FXXU1AQF7_CL11544126_QB13847492_REV00_user_low_ship.tar)
Odin says successful install for both but can't get past boot screen.
Should I try flashing AQF7 firmware now? (downloading anyway). I would've tried it without asking but seen people doing it and still stuck at the same situation.
ODIN Log for TWRP flashing:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1207)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
ODIN Log for BL Flash
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1207)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> param.bin
<ID:0/006> up_param.bin
<ID:0/006> cm.bin
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
What if you try latest BTU firmware (CP/BL/AP/CSC) and then flash TWRP, untick autoreboot and try again? Is what comes to my mind atm
Well finally managed to flash a firmware... all is good. Phone is rooted now. All I wanted to do is to change the imei of this device. Installed Xposed firmware and the module (IMEI Changer). Imei changed as well, but when I put a sim it say not registered to network. Xposed IMEI changer says that its a software exploit and in Pakistan, the telecom authority has blocked all the imported phones (asking ridiculous amount as customs duty). Now I am not sure if the phone is carrier locked or locked by PTA (Pakistan Telecommunication Authority).
I apologize for the thread itself. It was more like a panic thread. Mods, would you please delete the thread, or if it doesn't bother anyone then someone please help me resolve this issue. PTA blocks the unregistered imei. This device is blocked and I have no idea how they do it. Youtube videos claims that imei changer works and changes the imei that PTA reads and unblocks the phone, but still not sure as I've successfully changed the imei.
Thanks.
Hi.
I can't flash any ROM on the A205F for some reason. I reach the download screen and any ROM I flash, including stock ROMs and every single one under the sun gives me the exact same error:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 5347 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> param.bin
<ID:0/006> cm.bin
<ID:0/006> vbmeta.img
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> dt.img
<ID:0/006> dtbo.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is what I get via Odin, what do I do?