WIP ROMs - AOSPA & OmniROM - by the same dev of the recovery mod MultiRom - Xiaomi Mi MIX Guides, News, & Discussion

Hi All,
The developer has kindly approved discussion of his work here.
You may find the work in progress ROMs here: https://www.androidfilehost.com/?w=files&flid=206524
I've flashed both and they seem functional albeit with one game-breaking bug being that the display brightness even on max is way too low.
Anybody else tried these or interested in seeing these be maintained?

Dev has an updated build of AOSPA on Android File Host. Brightness issues are fixed. Appears to be an issue with pie controls.
Otherwise seems solid.

Related

cm-11 successfully ported to SM-T900 (Tab Pro 12.2

Updated 10/22/2014 10:20pm EST - Thread closed see new thread http://forum.xda-developers.com/galaxy-tab-pro-12-10-8/general/cyanogenmod-tab-pro-12-2-sm-t900-t2914991
chhaggerty has now posted his source built cm11 for SM-T900 that has a full OP, why this post no longer is needed. Additionally, his build is the most complete and also runs smoother than its predecessors. However, without the initial work carried out by crpalmer, Valera1978 and bonuzzz this release would not have seen the light until much later, if ever.
I know this is not the correct place for this info, but the original thread is very, let's call it, chaotic. The OP is not maintained (do not flash .zip-files available in the OP), and it's very hard to find details unless you participated from the start and followed the development. Further, I believe this is of public interest for the community members, as the T-900 has not seen much development until now.
Tired of your laggy base ROM?
Valera1978 and bonuzzz from the P-900 forum has successfully ported crpalmer's cm-11 T-520 picassowifi to the SM-T900. The cm-11 ROM is very snappy and responsive, there is no reason not using it as a daily driver. Before flashing it's recommended to update to TWRP 2.8.0.0, see my note for details
Attention: This is a non-stock based ROM, why you also need to install gapps (set of packages - full, mini, micro, nano, pico). I prefer the Pico in order to be in control of the maximum of what is installed, but that's up to you.
Finally: Don't forget to make a backup of the ROM you currently have installed.
Do you want to try but are afraid to make the change? bonuzzz has released MultiROM for T-900. This will allow keeping your TouchWiz ROM, and concurrently install cm11. You can then, seamlessly, go back and forth between the two alternatives.
Alternatively, you can also try it the traditional way. However, some people had issues in going back to StockROM after having tried cm11, but after flashing bonuzzz's MultiROM kernel on the top of the TouchWiz ROM, it boots up immediately and radically improve the performance, isn't that a bonuzzz.
For the cm11, there might be some minor, non-verified, remaining issue(s);
- auto-rotation - screen orientation is always presented in landscape mode, independent of settings. However you can use an app, eg Ultimate Rotation Control, to lock the screen in any direction.
- IR blaster - I used IR 2.0 and had no issues with TouchWiz, but no reaction with cm11
I will try keeping a POST up to date with latest developments
- LED notification lights - don't look for it, functionality is not supported by the device
- Proximity sensor - don't look for it, according to Samsung's specs the device does not have one
Details of what has been fully tested can be found HERE
Valera1978 said:
cm-11-20141012-UNOFFICIAL-v2wifi
Merge with latest official nigtly 20141012.
Also included new kernel.
https://drive.google.com/file/d/0B-6...ew?usp=sharing
Please test it.
Click to expand...
Click to collapse
Note: the BROWN text contain links to the actual postings
Need help installing the rom
arcadia2uk said:
Updated 10/18/2014 08:40am EST
I know this is not the correct place for this info, but the original thread is very, let's call it, chaotic. The OP is not maintained (do not flash .zip-files available in the OP), and it's very hard to find details unless you participated from the start and followed the development. Further, I believe this is of public interest for the community members, as the T-900 has not seen much development until now.
Tired of your laggy base ROM?
Valeria1978 and Bonuzzz from the P-900 forum has successfully ported crpalmer's cm-11 T-520 picassowifi to the SM-T900. The cm-11 ROM is very snappy and responsive, there is no reason not using it as a daily driver. Before flashing it's recommended to update to TWRP 2.8.0.0, see my note for details
Attention: This is a non-stock based ROM, why you also need to install gapps (set of packages - full, mini, micro, nano, pico). I prefer the Pico in order to be in control of the maximum of what is installed, but that's up to you.
Finally: Don't forget to make a backup of the ROM you currently have installed.
Do you want to try but are afraid to make the change? Bonuzzz has released MultiROM for T-900. This will allow keeping your TouchWiz ROM, and concurrently install cm11. You can then, seamlessly, go back and forth between the two alternatives.
Alternatively, you can also try it the traditional way. However, some people had issues in going back to StockROM after having tried cm11, but after flashing Bonuzzz's MultiROM kernel on the top of the TouchWiz ROM, it boots up immediately and radically improve the performance, isn't that a Bonuzzz.
For the cm11, there might be some minor, non-verified, remaining issue(s);
- auto-rotation - screen orientation is always presented in landscape mode, independent of settings. However you can use an app, eg Ultimate Rotation Control, to lock the screen in any direction.
- IR blaster - I used IR 2.0 and had no issues with TouchWiz, but no reaction with cm11
I will try keeping a POST up to date with latest developments
- LED notification lights - don't look for it, functionality is not supported by the device
- Proximity sensor - don't look for it, according to Samsung's specs the device does not have one
Details of what has been fully tested can be found HERE
Note: the BROWN text contain links to the actual postings
Click to expand...
Click to collapse
Hello,
I tried to install your rom but it gave me an error. I installed twrp 2.8 and then I flashed the cm11 rom. See attached picture for the error.
I am very new in flashing stuff so I hope someone can help me and tell me what to do.
Many thanks.
Deslang16 said:
Hello,
I tried to install your rom but it gave me an error. I installed twrp 2.8 and then I flashed the cm11 rom. See attached picture for the error.
I am very new in flashing stuff so I hope someone can help me and tell me what to do.
Many thanks.
Click to expand...
Click to collapse
I hope that you started by making a backup of your current ROM. Thereafter, I assume you did a factory reset, and also wiped your system.
However, It looks like you are installing gapps before the ROM, it should be the other way around. First ROM, then gapps.

[Q&A] (Official) Dirty Unicorns V8.0

Q&A for (Official) Dirty Unicorns V8.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Isn't there a way to set Omniswitch as default Recents?
Also, the Last app switcher button made systemui crash once and the phone became unresponsive (had to turn it off holding the power button). Otherwise, very good rom!
Ask the omni app Dev
So, i don't want to taint the main thread with my troubles.
D802 user here, austrian phone.
I'm trying to flash DU coming from PA and I do the following:
1 wipe all except for internal storage
2 flash 10a modem
3 Flash du 8.1
4 Flash gapps (optional)
5 Reboot to system.
Every time I try I get constant fc on systemui no matter what.
Any hints?
baseband for DU v8.1 update
Hi I am a lg g2 D802 user. Does this DU 8.1 update still need the JB baseband ?
Thx
Steim said:
Hi I am a lg g2 D802 user. Does this DU 8.1 update still need the JB baseband ?
Thx
Click to expand...
Click to collapse
AFAIK that's correct. This rom needs a jb modem.
Link Down
Hey, i have a problem with the download. The link dosen't work!! Please fix it, thanks!
installation for newcomer
sorry to ask,
I have D802 16GB coming with stock 4.4.2 D80220d-Eur-XX, b/b M8974A-AAAANAZM-1.0.190084
1. Can I do NOT wipe internal storage and just copy DU firmware and GApps there after factory reset?
2. Do I really need to flash older JB baseband?
3. In a case- Yes, shall I do it after I install DU f/w, before reboot, after? (which custom recovery to use?)
I flashed the latest ROM, flashed LGD802_10B_EUR_RADIO.zip. Rotation Works but can't change the sound volume. Any fix for this?
Btw, also tried LGD802_10A-232_RADIO.zip, still not able to change the Volume. I'm from Portugal, my phone is the D802.
Please help
EDIT : Volume changer just doesn't work with Google Play, Apollo. Works fine with youtube
I'm using the last build, came from Vanir, did a full wipe. I cannot apply any wallpaper to the lock screen, neither from my gallery, nor from the theme manager. It's always a black screen. Any way to fix it?
Yeah stop being lazy and look in the dirty tweaks
blaskewitts said:
Yeah stop being lazy and look in the dirty tweaks
Click to expand...
Click to collapse
I tried from Dirty Tweaks too. That's why I'm here asking as my last resource. I know how high are the probabilities to receive an stupid answer from a jerk.
Your right I'm a jerk because you can't search in dirty tweaks. It works just fine either look yourself, submit a bug report to jira or gtfo
Can i flash the 805 model with this rom???
Can't find where it says the model compatibility
Not officially supported
Sent from my Nexus 7 2013 using XDA Free mobile app
Hey, after flashing my orientation Sensor isnt working anymore :/ anybody got a clue? Ty!
Sent from my LG-D802 using XDA Free mobile app
With JB baseband on d803 the compass is broken. Any ideas?
Download Links
I cant download the d802 version on the site. Keep getting 404. Are the download links down by any chance? No mirrors?
The downloads site has 8.1 listed, is it stable?
I am relatively new to XDA but nonetheless have looked for an answer quite a bit before posting here. The Dirty Unicorns website has an 8.1 build that was released on 10/20/2014, I was wondering if that's a stable version.
EDIT:
The above is still open for an answer nonetheless, I went ahead and installed 8.1 (Clean Flash) it is super stable, no issues, anywhere except two. Before I talk about the issues: I checked nearly every setting changed them but still no crashes, no problems.
The two issues:
1) The battery life has turned into being unbearably bad. When the phone is in sleep, it is great but once I start using at around 50% brightness with normal applications like Dolphin browser, Facebook and all, I can actually see the battery drop every few minutes.
2) The music volume is somehow broken. Anything I play, from the music player, or YouTube, the sound is high for the first few seconds and then becomes extremely low. I tried other music players also but still,no luck. I tried changing every setting related to "Volume" and "Buttons" but no fix at all!
Any suggestions for these two? I tried so many Roms but now nearly all my Android devices use Dirty Unicorns. I just do not want to uninstall this ROM, so please help
Here is what fixed it for me.
joaolliveira said:
I flashed the latest ROM, flashed LGD802_10B_EUR_RADIO.zip. Rotation Works but can't change the sound volume. Any fix for this?
Btw, also tried LGD802_10A-232_RADIO.zip, still not able to change the Volume. I'm from Portugal, my phone is the D802.
Please help
EDIT : Volume changer just doesn't work with Google Play, Apollo. Works fine with youtube
Click to expand...
Click to collapse
I did not flash a new "Radio" or anything, I just clean flashed DU 8.1, then the volume did not work. I went to DSP Manager and enabled the equalizer (acoustic, but I'm sure anything will work) and the volume control started working.

[6.0.1][K920][kingdom_row]CyanogenMod 13.0 for Lenovo Vibe Z2 Pro - Support and Help

Since the development thread is closed by OP request( sad but true ), and personally building a "port" of the ROM, i'm glad to help everybody as i can, with this thread.
It doesn't mean to be a development thread since i only build and implement some changes, but just to share comments, issues( like xposed one ) or just ideas to people who own this device ( CN or ROW ).
As a reminder you can find my builds here: LINK or just use OTA function in ROM.
And a big thanks to @frantisheq and @Electry for the works on CM13, and for the next, CM14.
reserved
Are someone try to flash Vibe Z2 (NON PRO) with this ROM?
don't do it, you will probably brick the phone.
K920/Z2 PRO only
Uploaded new build!
Should have Dec 5 patches, have a nice day
Try to install the latest build together with xposed. There is a boot loop with CM logo...... It seems to me there was such kind of problem......
That should be fixed by cm ? . Will apply the xposed fix in next build.
Thanks to inform me about this!
Tapatalk
updated build, with xposed patch, hoping now works fine
The latest build works fine for me. I installed it with xposed.
Hey @malaga82
I have a strange feeling that the new ROM is worse in performance compared to the previous build. It has way more stutters and sometimes the system UI resets and changes my wallpaper to the stock one. Anyone else facing such issues?
Saamyo said:
Hey @malaga82
I have a strange feeling that the new ROM is worse in performance compared to the previous build. It has way more stutters and sometimes the system UI resets and changes my wallpaper to the stock one. Anyone else facing such issues?
Click to expand...
Click to collapse
Could you please provide more details about this behavior and I try to reproduce it? Now I have not such kind of problem. But I can say that the UI sometimes has strange behavior. For example, the horizontal size of quick settings can be more widely than the size of the screen.
maybe it's something related to CM repo's and they will fix "soon".
give some days to see if they fix anything, i'll provide a new build.
In additional to my previous report I would like to add that the latest build cannot hold loading. At the previous build from 16 Nov I can run at the same time a navigation application and a video registration application. Now I cannot do the same because the device is rebooting due to overheating. I tried to figure out what is going on and found that the high limit of CPU0 temperature is set up to 85 C (it seems to me it is low....) and I cannot change it – try several tuning tools. And it is not only one reboot – there are several reboots….. After its a Bluetooth pairing was lost….. And I can repair a normal work only wipe cache & dalvik through TWRP and pair a Bluetooth once again…..
i'd like to have more feedback if possible.
i'm thinking to try to build with the "old" kernel that have cpu voltage control and other features i included times ago.
atm we are a bit stuck with development.
malaga82 said:
i'd like to have more feedback if possible.
i'm thinking to try to build with the "old" kernel that have cpu voltage control and other features i included times ago.
atm we are a bit stuck with development.
Click to expand...
Click to collapse
What information could I provide to you to help?
i just want to know if someone else have that overheating issue
Could you please prepare a build with "old" kernel? Who does not face the overheating problem can stay on the previous one
Solved games issue.
Hello!
Sorry for my English, I from Russia.
On roms later CM 13 2016.03.07 in file: build.prop, increase the value: dalvik.vm.heapsize= from 512m to 768m. This led to the errors in game Real racing 3 (insufficient free memory, missing textures, game crashes). With value 512m games work fine.
If install Adreno drivers from ROM CM 13 2016.03.07, game Gear.club also work fine. The difference can be noticed immediately after starting the game.
I also sent this message to frantisheq.
Happy new year!
Solved games issue.
Additional information to the previous post.
I was looking the file: default.prop, and the parameter ( dalvik.vm.dex2oat-xmx ) is set to =512m. System parameter ( dalvik.vm.heapsize=768m) overlap kernel parameter. Possible, if rebuild kernel with the value 768m, all be fine? I don't test this.

Bluetooth call issues with every AOSP rom

Hello everyone,
Sorry if this is obvious or a known bug but i've searched through a dozen of AOSP threads and found nothing satisfying.
So here's the story :
- I have clean flashed LineageOS 14.1 official 20180110 a week ago but i have those distorted voices when called over any bluetooth device (tried car and BT Speaker). On their thread someone says that it actually has been fixed in 20180103 build but the problem is still present though we're already one build ahead since then.
- Anyway, I decided to change my rom and try out AOKP. I clean flashed it today. Working fine, except for that exact same bug.
- Tried AOSPExtended, same thing.
So do all AOSP roms have this bug? I can't believe it since apart from 1 or 2 posts in Lineage's thread nobody seems to care in any AOSP rom.
If (and i hope so) the answer is no : could a kind soul show me some good AOSP rom without this problem?
Thanks for caring
Same for me on Galaxy S7 (herolte G930F).
Tried newest LineageOS and AOKP - directly after setup. No other changes made. Music over bluetooth works as expected. Phone calls imposible.
I found a Video here which shows exactly what happens:
Google: "s7 edge lineageos bluetooth Youtube":
https://www.youtube.com/watch?v=utDsXrCY5N0
Also some other People seem to have the same problems. See other thread (Post #1999):
https://forum.xda-developers.com/ga...ial-lineageos-14-1-galaxy-s7-t3529197/page200
Thanks for the infos !
I didn't see the post 1999 is LOS thread, seems like the build.prop is a good fix but unfortunately it doesn't work on latest LOS build.
Will try on AOSPExtended with the same editing on audio_hal property.
EDIT : Works on AOSPExtended ! Didn't try AOKP yet
Hi can you please explain how did you fix this ? happen exactly the same for me, thanx

Android 9.0 For G920F/G925F

Hello Guys :fingers-crossed:
What about our beloved device, Is there any developer who works on this project to bring us android pie for this device
And if there can we test it ?? :good:​
Yes, and yes.
@lukasb06 is working on it, and TeamNexus (?). Go and give him thanks on his thread for the NexusOS
He hasn't been online in almost two weeks or so, though. Not sure how he'll feel about us being the ones to spread news about his ROM instead of letting him do that, but oh well.
https://stor.lukasberger.at/TeamNexus/.testing/Samsung/zero/9/2018-09-08/
Though be wary, there's not even a thread about it yet, so many bugs could be present.
Bit of advice:
1. Stock camera doesn't work - use the GCamera modded for the S7Exynos.
2. GPS in plain device mode doesn't work - use high accuracy.
GApps can be downloaded from the OpenGapps website just select ARM64, 9.0, pico, and flash them after flashing the ROM.
Nice Thank you :highfive:
What about RIL Is it working ??
Well, no one has reported it as a bug yet, as far as I'm aware, so yeah?
Though bluetooth call-audio, and VoLTE (like in Oreo ROMs) don't work.
Also, instead of the modded GCamera, you can try using Open Camera.
- black theme crashes
- can´t power off softkey lights
Calling is working, back camera is working in open camera, but front camera always FC.
That is what I tested for 30 min. (SM-G920F)

Categories

Resources