Database Users

[Lollipop][5.0.2][ROM] for Moto G 2014 (2nd Gen) + Rooting guide

In this post, I’ll guide you to install Titan Prime ROM in your Moto G 2014 with rooting procedure. You might have already seen that the rooting methods depend on SuperSU flashable ZIPs and it may take a while to boot the phone once you root it. Keeping it in mind, let’s see how you can install Lollipop 5.0.2 ROM in your Moto G 2014 (2nd Gen).
Note: I have permission to redistribute this artilce without mentioning the owners' identitiy
Disclamer
HTML:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, BURNT LEDs,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications.
*/
Pre-requisites
You must have a custom recovery like TWRP. Get it from here if you don’t have already.
The ROMs are different for XT1063/64 version and XT1068/69 version. Download the appropriate version with respect to your phone model. Incorrect flashing may lead to signal lose.
Your bootloader must be unlocked.
Backup all important files in the internal memory and settings.
Charge your phone for at least 50% so the phone doesn’t die while flashing.
________________________________________________________________________________________________
Install Lollipop 5.0.2 ROM on Moto G 2014 (2nd Gen) – Titan Prime ROM
Download the latest build from here for XT1063/64 version and from here for XT1068/69 versions. (Pick the last one [most down one] )
Copy the ROM to your phone.
Boot your phone into recovery (TWRP preferred).
Do a backup of your current OS (Highly recommended).
Now do Factory Reset from TWRP (WIPE DALVIK/CACHE/DATA/FACTORY RESET).
Install the copied ROM file.
After successful flashing, wipe Cache and Dalvik from recovery itself.
Reboot system.
You have successfully flashed the Lollipop 5.0.2 ROM in your Moto G 2014. It should take up to 5 minutes to boot for the first time. The ROM is not pre-rooted as of now. So you’ve to root it manually. In case you need to root your Moto G 2014 running on Lollipop 5.0.2, follow the below procedure.
How to Root Moto G 2014 Running on Lollipop 5.0.2 – SuperSu
Download SuperSu beta v2.42 from here and copy it to your phone.
Boot your phone into TWRP recovery and install the SU zip.
After flashing, wipe Cache and Dalvik. Then reboot.
Boot may take up to 3-4 minutes after wiping the caches.
______________________________________________________________________
Screenshots of Titan Prime ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
__________________________________________________________________________
FAQ
Q. Is there any bug in rom, does wifi and dialer work fine?
A. NO Bugs!

You should point users to use last stable supersu and not that crap version that make our phones bootlooping
Sent from my XT1068 using XDA Free mobile app

I want to see screenshot of this rom

[ROM][6.0.1_r13][cancro] NamelessROM 3.0 [UNOFFICIAL][ Feb 7]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is NamelessROM?
NamelessROM Gerrit Review
Disclaimer
Code:
#include <std_disclaimer.h>
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Got a bug report? Want to request a feature? Need extended support?
NamelessROM Website / Forum
Google + Community
JIRA Bug Report
Installation Instructions
FROM OTHER ROMS
Factory Reset/Wipe Data
Format System
Format Dalvik Cache
Install ROM
Install Gapps
Reboot
Profit
UPDATE FROM NamelessROM TO NEWER RELEASE
Just download the zip and flash it. You will NOT need to wipe anything.
Optionally you can also use our own OTA Updater
Contributions and Credit
*Android/Google/AOSP
*AOKP
*AOSPA
*CyanogenMod
*OmniROM
*SlimROMs
ALL OF OUR AWESOME TESTERS
​XDA:DevDB Information
[ROM][6.0.1_r13][cancro] NamelessROM 3.0 [UNOFFICIAL][ Feb 7], ROM for the Xiaomi Mi 3
Contributors
Shivam Kumar Jha
Source Code: https://github.com/NamelessRom
Device
Kernel
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Custom Recovery
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-02-07
Last Updated 2016-02-07

SCREENSHOTS:
Quick Info:
Stock system partition size
CM13 kernel source code
Downloads
DELETED
Gapps

Not able to flash gapps... CWM gives error... So I guess they can be flashed only using TWRP?

anshude1 said:
Not able to flash gapps... CWM gives error... So I guess they can be flashed only using TWRP?
Click to expand...
Click to collapse
Don't use CWM ,it is not stable for cancro..use TWRP ,it is best, no problems

Installed TWRP- After flashing open gapps 6.0 get error that set up wizard has stopped... Tried all kinds of flashes.. Clean flash- not working- CLean flash + reboot without gapps and then flash gapps after first boot = not working... Any ideas?

anshude1 said:
Installed TWRP- After flashing open gapps 6.0 get error that set up wizard has stopped... Tried all kinds of flashes.. Clean flash- not working- CLean flash + reboot without gapps and then flash gapps after first boot = not working... Any ideas?
Click to expand...
Click to collapse
Set up google Play later.
Actually, Google PLay Services requires a few permissions. So go into settings and then Apps to give it permissions.

Solved it... The gapps need to be flashed along with rom... In twrp it is possible... Flashed both the rom and gapps together...

anshude1 said:
Solved it... The gapps need to be flashed along with rom... In twrp it is possible... Flashed both the rom and gapps together...
Click to expand...
Click to collapse
I tried to flash both rom and gaaps using TWRP not booting after setup is finished. Then i flash Rom alone and i am able to boot, Then i againg flashed gaaps seprately it's not working.

P.thina said:
I tried to flash both rom and gaaps using TWRP not booting after setup is finished. Then i flash Rom alone and i am able to boot, Then i againg flashed gaaps seprately it's not working.
Click to expand...
Click to collapse
In twrp select rom as first file and select gapps as second file... We can flash 10 zip files one after another in twrp by selecting them once... Don't flash rom first then back in twrp and then gapps... Select both files in one go... Only when I did that was I successful...

How to install on Multirom? You have a updater-script like on Beanstalk? Sorry for my english

I'll try this rom. Lets see what will be the result

Mod Edit
Thread Closed per [OP] request.
jackeagle
Forum Moderator

[UNOFFICIAL]PitchBlack Recovery for Sirius

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Introduction
Pitch Black Recovery is a fork of TWRP with many improvements to make your experience better. It's more flexible & easy to use.
Based on TWRP version: 3.3.1
PitchBlack version: 2.9.0
For device: Sirius
Maintainer/Authors build: @zakwanPHG
PitchBlack Source Code: https://github.com/PitchBlackRecoveryProject
PitchBlack Team: @rezaadi0105, @firewolfxda, @manjot.gni, @androiabledroid, Arbaz Khan
Features
Supports Treble and non-Treble ROMs
Up-to-date Pie kernel, built from sources
Full dark theme with changeable accents
Reorganized menus
MIUI OTA support
Disable DM Verity
Use AromaFM as default file manager
Various tools are include
Universal flash-able file for all variant of a device
Many bug fixes & optimization & much more
Click to expand...
Click to collapse
Installation Instructions
From previous version or other recovery
Download the PitchBlack zip to your device
Reboot to your current custom recovery
Flash the PitchBlack zip
The device will automatically reboot into PitchBlack Recovery after installation
Enjoy
From PC(Windows & Linux)
Download PBRP PC Installer zip from bellow
Download PitchBlack Recovery flashable zip from bellow
Extract the PBRP PC installer zip & copy the flashable zip to the installer folder
Goto fastboot mode in your device
Windows users open pbinstaller.bat file
Linux users execute pbinstaller.sh in a terminal
Follow the introductions on the installer from there
Enjoy
(LInux users will need unzip, adb & fastboot installed on their system)
Changelog
Code:
v2.9.0
- Update kernel
- Update DM Verity Logic
- Update magisk
- Update unroot magisk
- Some bug fixed
Downloads
Flashable zip
Download PitchBlack
Version Information
Status: Beta
Created: 2019-06-23
Last Updated: 2019-06-23

Device side Changelog :
23-06-19
* Initial build
* Fix vibration
* Add notched
* Magisk 19.3 included
* Fix brightness

Works great. Thx.

bro when i install it by twrp and reboot phone to recovery mode stuck at logo Mi why....my rom official rom cn 10.2.2 .

Android Alsafa7 said:
bro when i install it by twrp and reboot phone to recovery mode stuck at logo Mi why....my rom official rom cn 10.2.2 .
Click to expand...
Click to collapse
Use china beta/dev rom only

zakwanPHG said:
Use china beta/dev rom only
Click to expand...
Click to collapse
thanks bro?+do u have telegram please massage me @ali_b4

can i install it on miui eu??

Android Alsafa7 said:
can i install it on miui eu??
Click to expand...
Click to collapse
Yes, you can

Don't know why always stuck at pitch black logo for me. All version. I'm using twrp 9.4.23

Does not fully boot, stuck at Pitchblack screen adb server is open on the phone though

Which rom you on?its base twrp dev 0423

Surmoka said:
Does not fully boot, stuck at Pitchblack screen adb server is open on the phone though
Click to expand...
Click to collapse
Yeah, same thing happened to me too. Maybe, kind of an encryption issue. Below is the way I got it to work:
- Go to the fastboot mode and install a TWRP. I used this installer by @TacoNikky.
- Go to TWRP and wipe all the data (not the factory reset though).
- Copy the Pitch Black recovery zip to your storage and flash it.
- Now try booting to PitchBlack. It should boot up just fine. Cheers.
BTW, all of this I did was over the official MIUI, and the stock recovery.

Work great without problem for me... Thanx dev

Trần Anh VN said:
Don't know why always stuck at pitch black logo for me. All version. I'm using twrp 9.4.23
Click to expand...
Click to collapse
mình cũng vậy

Looking for some help/input. I installed this and it's stuck on the splash screen.
I tried to install a different TWRP using the below command but it tells me I don't have fastboot. The instructions in post 12 won't work because of this, anyone able to point me in the right direction?
fastboot flash recovery twrp.img

BJozi said:
Looking for some help/input. I installed this and it's stuck on the splash screen.
I tried to install a different TWRP... in the right direction?
fastboot flash recovery twrp.img
Click to expand...
Click to collapse
What do you mean, you don't have fastboot?

tanjir.h said:
What do you mean, you don't have fastboot?
Click to expand...
Click to collapse
Pc doesn't have it, I fixed that but I can't get anything to flash. I started a new thread here https://forum.xda-developers.com/mi-8-se/help/problems-installing-twrp-t3967968

BJozi said:
Pc doesn't have it, I fixed that but I can't get anything to flash. I started a new thread here https://forum.xda-developers.com/mi-8-se/help/problems-installing-twrp-t3967968
Click to expand...
Click to collapse
Try to see if your fastboot command works or not by typing
fastboot devices

It listed a device by number, that's why I'm not sure what's up. I'll try the flash tool this eve as per my other thread. Thanks for your help!

BJozi said:
It listed a device by number, that's why I'm not sure what's up. I'll try the flash tool this eve as per my other thread. Thanks for your help!
Click to expand...
Click to collapse
It's totally fine. It recognized your device. :good:

[ROM][LINEAGE-OS][11][UNOFFICIAL][KUNTAO]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THANKS @Astridxx
THANKS MIKE
Download:-
LINEAGE_OS_KUNTAO
Known issues:-
• CAST
Kernel_source
Changelogs :-
• initial build

my phone was stuck in bootloader mode in November and later updates. I installed 18.1 with twrp 3.4. "twrp3.4" recovery became "lineage recovery". I am writing this message with 18.1. I could not find fingerprint gestures. I did not experience video playback, mp3 playback problems.
I installed "Gapps-Android-11-sagar-12-09-2020". I like "nano gapps".

kocapomak said:
my phone was stuck in bootloader mode in November and later updates. I installed 18.1 with twrp 3.4. "twrp3.4" recovery became "lineage recovery". I am writing this message with 18.1. I could not find fingerprint gestures. I did not experience video playback, mp3 playback problems.
I installed "Gapps-Android-11-sagar-12-09-2020". I like "nano gapps".
Click to expand...
Click to collapse
Try nikgapps

kocapomak said:
my phone was stuck in bootloader mode in November and later updates. I installed 18.1 with twrp 3.4. "twrp3.4" recovery became "lineage recovery". I am writing this message with 18.1. I could not find fingerprint gestures. I did not experience video playback, mp3 playback problems.
I installed "Gapps-Android-11-sagar-12-09-2020". I like "nano gapps".
Click to expand...
Click to collapse
Settings > Kuntao Resurrected> Fp gestures

I found it now.
Settings-Kuntao Resurrected-Gestures-Fingerprint Gestures -- active
But it works sometimes, it doesn't works sometimes.

How is battery? Is it better than android 10?

What's is the new in new version of https://sourceforge.net/projects/roms5/files/lineage-18.1-20201229-UNOFFICIAL-kuntao.zip/download

I installed that rom. During the instalation I confirmed to update some los recovery. Then twrp was gone. I flashed twrp again, but every time I want to go to twrp, this los recovery comes up. I aslo couldnt flash gapps. Nickgapps are flashing, but system doesnt ask me to log into my Google account and I cant restore backup from Google cloud. Other version of gapps doesnt install as twrp says couldnt mount vendor.
The real issue for me now is dissapearing twrp.

@amdyss Uncheck the "Update Lineage Recovery" box when doing the setup. This fixes the issues of TWRP being replaced by the LOS
Recovery.
As for the gapps issue: For NikGApps you also need to flash the SetupWizard zip after the gapps one in order to get the account prompt.

I did a fresh install with uncheck - nothing happend, then I installed TWRP via adb again and installed some Pie rom. Then after setting up the rom I wanted to go to TWRP and install Magisk - and this LOS recovery still messes up normal TWRP.

Dont trust this build

simbanono said:
Dont trust this build
View attachment 5174713
Click to expand...
Click to collapse
then u make build

Look at the attachment (size of the rom) before you judge someone for making a joke.

simbanono said:
Look at the attachment (size of the rom) before you judge someone for making a joke.
Click to expand...
Click to collapse
So what?? I haven't manually put the size of ROM to be that, you will not have to trust lineageOS.

Stuck on boot animation plz help

bubka160195 said:
Stuck on boot animation plz help
Click to expand...
Click to collapse
Try the official version. It's much more up to date.
[ROM][11][OFFICIAL] LineageOS 18.1 for Lenovo P2
#include /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns...
forum.xda-developers.com

3volution3 said:
Try the official version. It's much more up to date.
[ROM][11][OFFICIAL] LineageOS 18.1 for Lenovo P2
#include /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns...
forum.xda-developers.com
Click to expand...
Click to collapse
I agree with You.
Furthermore the update are weekly as it was the case with LineageOS 17.1 Official.
Have a look at the changelog and You will also seen that the updates are more accurate and numerous

Flashing Guide for new Poco M3 buyers in 2021

I have 2 poco m3 phones. The first 1 was bought in 2020 and there was no problems with flashing to another firmware.
The second one I bought in november 2021 and I faced many issues trying to flash. Xiaomi also use different touchscreen so custom firmware may not work.
This is what you should do if you have the newer problematic poco
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1) INSTALLING RECOVERY
Use this Pitch Black Recovery. TWRP and Orange Fox doesnt work on this newer poco m3 hardware manufactured in 2021. The other recovery will just be a black screen. Extract the .img and flash using fastboot
[RECOVERY][UNOFFICIAL[joyeuse][v3.0.0] Pitch Black Recovery [07/08/2020]
/* *Disclaimer * * Your warranty is now void. * * We're not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about...
forum.xda-developers.com
UPGRADING TO ANDROID 11
If you dont upgrade to Android 11, you will face issue trying to flash, such as
"Failed to mount system_root"
"Failed to mount product. No such file or directory"
Normally TWRP can mount SYSTEM without issue but TWRP / OrangeFox is not supported with this new POCO hardware
This rom works fine with Pitch Black Recovery
xiaomi.eu_multi_HMNote94G_HM9T_POCOM3_21.9.8_v12-11.zip
drive.google.com
FLASHING CUSTOM FIRMWARE
After you flash, no need to reboot, just flash your custom firmware. If you reboot to the MIUI above, it will just be stuck at MIUI logo.
Don't reboot to SYSTEM yet because touchscreen doesn't work
INSTALLING TOUCHSCREEN DRIVERS
The custom firmware doesn't support the newer touchscreen model used in POCO M3. So you need to install drivers. This can be done simply by flashing kernel in recovery which has newer touchscreen driver.
Use this kernel for POCO M3 2021: https://github.com/GZR-Kernels/Optimus_Drunk_Citrus/releases
Now, everything should work fine!

Hi man, I'm new to this device, I think that I have the problematic version of poco. I successfully managed to update to miui 12 eu and then install a custom but every time I make a clean install of any rom won't let me until I flash eu first. Is there a way to not to install eu first only flash directly any custom rom? Thanks in advance