Related
Hi,there!
in the first place ,I should give special thanks to webmaster,because I spent many time to register a member of here,but failed,he helped me to make it!thanks!
I bought a chinese tablet ,viewsonic n710,it has similar hardware to n7,maybe I should say ,it's a fake n7.
nvidia t3 cpu ,and 1g ram,8g rom!but its' android version is still 4.04!and unfortunately ,because of the manufacture's reason ,I can not get any big update from them,they just released some patch for this product!
at the begining ,its' recovery was android backup <3e>,as we know ,it can not backup the whole system to external disk,hence ,I spent 3~4 days to naturalize cm recovery to my device ,and finally ,I made it!at here ,I must give special thanks to the author!:good:
here comes my question ,can I update kernal by myself?the first way I thought ,may I replace the kernal by n7's zimage?you know its' kernal version is 4.21 now?and will it work with my n710?
if not ,can I compile the kernal by myself?because I am a newbie with android system,I have no experience on such a project.some documents said that the hardware drivers is included in the kernal,is it right?if it's right ,that's to say ,what I do is only waitting for the manufacture's update?
the second question , can I naturalize n7 rom to my n710? because the system kernal is different.to be honest,and I have no idea about the cause of android boot now.and if it may .please give me some suggestion to do it.because there are little helpful chinese article on learning such technology in china!
appreciated you guys any help and reply!!:highfive:
and finally ,I am so sorry for my poor english!
I highly doubt the nexus 7 ROM will work on your view sonic. There's a lot of differences even though they have the same hardware. I wouldn't try putting a n7 ROM on it. There's a chance you could fry it. I had a view sonic tegra 2 tablet and I know how you feel. They never update anything.
The place to start is by looking at partition/ directory structure.. Im guessing your device is unlocked as you have a custom recovery on it.. If the directory structure is STOCK ANDROID as in 4.0 4.1 . There is a chance with some kernel tweaking you can get it ported. There will NO DOUBT be hardware to not work .
There is not a yes or no answer. Because it Can very likely be ported . its just about how much time you want to spend .And resources available for the hardware in your tablet..
So i would start by looking at the device structure. And compare hardware differences between the device such as wifi sound bluetooth and other hardware .
Its likely will cost you more and frustrations .then just buying a nexus.. But xda is all about what your asking..
GOOD LUCK if you tackle the project...
kieso said:
I highly doubt the nexus 7 ROM will work on your view sonic. There's a lot of differences even though they have the same hardware. I wouldn't try putting a n7 ROM on it. There's a chance you could fry it. I had a view sonic tegra 2 tablet and I know how you feel. They never update anything.
Click to expand...
Click to collapse
erica_renee said:
The place to start is by looking at partition/ directory structure.. Im guessing your device is unlocked as you have a custom recovery on it.. If the directory structure is STOCK ANDROID as in 4.0 4.1 . There is a chance with some kernel tweaking you can get it ported. There will NO DOUBT be hardware to not work .
There is not a yes or no answer. Because it Can very likely be ported . its just about how much time you want to spend .And resources available for the hardware in your tablet..
So i would start by looking at the device structure. And compare hardware differences between the device such as wifi sound bluetooth and other hardware .
Its likely will cost you more and frustrations .then just buying a nexus.. But xda is all about what your asking..
GOOD LUCK if you tackle the project...
Click to expand...
Click to collapse
thank you guys for your advice in the first place!!
although I think that it's very challenged for me,but I still want to have a try first,even I can guess that I will be frustrated in the end!
nowadays my ieda is that don't modify any things on zimage,just simply naturalize the n7 rom to viewsonic n710!!
I think that there's a little chance for me if I keep doing on it!you know ,I am just a newbie on android system ,so in the first place ,I may lost way,
but it's no matter to me if I can learn something from naturalization.so I have decided to make it even I know that I will fail!
good luck to me!
Hi!
Would you be kind to explain me a bit more, what do you want to make with your tablet? Do you want to install nexus7 firmware on it or what?
By the way, do you know how to root this device?
chinajjb said:
Hi,there!
in the first place ,I should give special thanks to webmaster,because I spent many time to register a member of here,but failed,he helped me to make it!thanks!
I bought a chinese tablet ,viewsonic n710,it has similar hardware to n7,maybe I should say ,it's a fake n7.
nvidia t3 cpu ,and 1g ram,8g rom!but its' android version is still 4.04!and unfortunately ,because of the manufacture's reason ,I can not get any big update from them,they just released some patch for this product!
at the begining ,its' recovery was android backup <3e>,as we know ,it can not backup the whole system to external disk,hence ,I spent 3~4 days to naturalize cm recovery to my device ,and finally ,I made it!at here ,I must give special thanks to the author!:good:
here comes my question ,can I update kernal by myself?the first way I thought ,may I replace the kernal by n7's zimage?you know its' kernal version is 4.21 now?and will it work with my n710?
if not ,can I compile the kernal by myself?because I am a newbie with android system,I have no experience on such a project.some documents said that the hardware drivers is included in the kernal,is it right?if it's right ,that's to say ,what I do is only waitting for the manufacture's update?
the second question , can I naturalize n7 rom to my n710? because the system kernal is different.to be honest,and I have no idea about the cause of android boot now.and if it may .please give me some suggestion to do it.because there are little helpful chinese article on learning such technology in china!
appreciated you guys any help and reply!!:highfive:
and finally ,I am so sorry for my poor english!
Click to expand...
Click to collapse
Did you have the ViewSonic N710 ROM?
chinajjb said:
Hi,there!
in the first place ,I should give special thanks to webmaster,because I spent many time to register a member of here,but failed,he helped me to make it!thanks!
I bought a chinese tablet ,viewsonic n710,it has similar hardware to n7,maybe I should say ,it's a fake n7.
nvidia t3 cpu ,and 1g ram,8g rom!but its' android version is still 4.04!and unfortunately ,because of the manufacture's reason ,I can not get any big update from them,they just released some patch for this product!
at the begining ,its' recovery was android backup <3e>,as we know ,it can not backup the whole system to external disk,hence ,I spent 3~4 days to naturalize cm recovery to my device ,and finally ,I made it!at here ,I must give special thanks to the author!:good:
here comes my question ,can I update kernal by myself?the first way I thought ,may I replace the kernal by n7's zimage?you know its' kernal version is 4.21 now?and will it work with my n710?
if not ,can I compile the kernal by myself?because I am a newbie with android system,I have no experience on such a project.some documents said that the hardware drivers is included in the kernal,is it right?if it's right ,that's to say ,what I do is only waitting for the manufacture's update?
the second question , can I naturalize n7 rom to my n710? because the system kernal is different.to be honest,and I have no idea about the cause of android boot now.and if it may .please give me some suggestion to do it.because there are little helpful chinese article on learning such technology in china!
appreciated you guys any help and reply!!:highfive:
and finally ,I am so sorry for my poor english!
Click to expand...
Click to collapse
i am very interested in your topic, because i have N710 too!
And want to know which CWM RECOVERY version can be installed? just download a last version?
Can the CWM recovery work right? such as BACKUP?
After analysised the OTA zip, i got some information but not enough.
maybe we can study together you can talk to me in vsset
sorry ,guys,I really did not know that there's some thread with my post after I didn't care this topic anymore,untill one guy sent private message to me,so I thought that should have a look to review !!
bezbod said:
Hi!
Would you be kind to explain me a bit more, what do you want to make with your tablet? Do you want to install nexus7 firmware on it or what?
By the way, do you know how to root this device?
Click to expand...
Click to collapse
all what I want to do is updating to my tablet,of course I have ever installed nexus7 to my device,but failed,it's out of my poor ability on android system!root this device is very simple now ,there's some ways to root it ,you can search it on internet ,especially care the chinese website!
bowen.chau said:
Did you have the ViewSonic N710 ROM?
Click to expand...
Click to collapse
yes ,I have!but it does not come from offical !!
hbgydx2002 said:
i am very interested in your topic, because i have N710 too!
And want to know which CWM RECOVERY version can be installed? just download a last version?
Can the CWM recovery work right? such as BACKUP?
After analysised the OTA zip, i got some information but not enough.
maybe we can study together you can talk to me in vsset
Click to expand...
Click to collapse
the cwm recovery is 6.1.1.19 ,and the backup function is ok,but I havn't tested restore function till now!!because my tablet still havn't bricked :laugh:I also have a member in vsset,but it seems that few people have enthusiasm on doing something on N710!!
a good news ,I BRICKED THE VIEWSONIC N710 IN INTENDED WAY!!!and used restore function to repair it,it works!!
the cwm group really did a swell thing to android system!!!thanks a lot!
I may release the cwm recovery in public way ,but it depends ,partly because we still have customer service if you bricked your device in negligent way or intended way!!but the main reason is because nobody published rom for N710!!!if you use this device in normal way ,it's hard to brick this device!!right???if you think that with cwm recovery ,your tablet will never be die ,it's wrong!!
chinajjb said:
a good news ,I BRICKED THE VIEWSONIC N710 IN INTENDED WAY!!!and used restore function to repair it,it works!!
the cwm group really did a swell thing to android system!!!thanks a lot!
I may release the cwm recovery in public way ,but it depends ,partly because we still have customer service if you bricked your device in negligent way or intended way!!but the main reason is because nobody published rom for N710!!!if you use this device in normal way ,it's hard to brick this device!!right???if you think that with cwm recovery ,your tablet will never be die ,it's wrong!!
Click to expand...
Click to collapse
you are master!
just release the cwm to help people. we can't wait viewsonic release rom, it will be a long time~
hbgydx2002 said:
you are master!
just release the cwm to help people. we can't wait viewsonic release rom, it will be a long time~
Click to expand...
Click to collapse
first of all ,I am no master!!
according to the reason I told above,I don't want to give viewsonic any reason to refuse repairing our n710 and update their rom with delay!
as we know, we still havn't perfect rom for n710,no matter 1.01 or 1.05,right?
if everyone has cwm recovery,when we blame the gps issue to them ,they may say "install 1.05",when we blame the power issue to them,"install 1.01,that's will be ok",what do you say then??
I think that you can understand it,right?of course I posted such a thread at here that isn't for boast,I really need others experience about naturalazing nexus 7 rom or cm10,you know, that's based on 4.1.x!
I also wish that I can make it ,and then I can do other things for myself,I really spent much time on n710 till now!!
if I knew that someone has made it,I will throw this project as soon as possible!
If you release the rom, we can try to transfer N7 rom to N710 together.
Sent from my Nexus 7 using Tapatalk 2
s2k7 said:
If you release the rom, we can try to transfer N7 rom to N710 together.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I am so happy that someone has the same thought with me!!
but because of my poor internet speed in china,I am afraid that I cann't!
the size of rom is about 850mb(if what I remember is right),it's a really big challenge for me to upload the rom!
my internet is wireless ,and the upload speed no more than 60k/s,and it's the common condition ,if the weather is bad ,the speed will be more bad!!
if you really want transfer N7 rom to N710,I think that you should not be messed by grabing rom from n710!!after all ,it's the first step you should do.right?
to my opinion ,to transfer n7 rom to n710 is not a good choice,though the hardwares look similar ,but in fact ,the touch pad,gps,camera and so on is totally different,I have ever flashed n7 rom to n710 directly ,but could not boot ,and it's the sure thing what I could image in the begining.and next ,I flashed modified rom which based on n7 rom to n710,still couldn't boot either!(of course,I may do many silly things on N7 rom modification,frankly,I am a newbie on android system) , but if you want n710 to have n7 operation interface(base on n7 rom but have n7 4.1.2 interface),just forget my words!I think that it's possible!
good luck if you really want to tackle it !guy!I also hope that someone can make it,because it can save my time.
and I am so surprised that foreign friends have interest on this device,because the device is not popular at all,even in china!
chinajjb said:
I am so happy that someone has the same thought with me!!
but because of my poor internet speed in china,I am afraid that I cann't!
the size of rom is about 850mb(if what I remember is right),it's a really big challenge for me to upload the rom!
my internet is wireless ,and the upload speed no more than 60k/s,and it's the common condition ,if the weather is bad ,the speed will be more bad!!
if you really want transfer N7 rom to N710,I think that you should not be messed by grabing rom from n710!!after all ,it's the first step you should do.right?
to my opinion ,to transfer n7 rom to n710 is not a good choice,though the hardwares look similar ,but in fact ,the touch pad,gps,camera and so on is totally different,I have ever flashed n7 rom to n710 directly ,but could not boot ,and it's the sure thing what I could image in the begining.and next ,I flashed modified rom which based on n7 rom to n710,still couldn't boot either!(of course,I may do many silly things on N7 rom modification,frankly,I am a newbie on android system) , but if you want n710 to have n7 operation interface(base on n7 rom but have n7 4.1.2 interface),just forget my words!I think that it's possible!
good luck if you really want to tackle it !guy!I also hope that someone can make it,because it can save my time.
and I am so surprised that foreign friends have interest on this device,because the device is not popular at all,even in china!
Click to expand...
Click to collapse
it is a good start
i am sorry about your internet, if have chance，just upload the rom. there will more people or a big guy to help us!
Viewsonic N710 Cannot start stuck at bootloader or on birsd image.
Hello Sir,
Pleae help me. I have Viewsonic N710 and it is not starting up. It only show the birds logo (logo of viewsonic).
I tried already the reset and all the reset option but its stuck on logo. It also show the dead android with triangle and ! mark.
Please let me know how to fix it.
I am new in android world.
Thank you very much.
Hello there guys nice to meet you :silly: , i ve neen with you for a while , reading some of your threads , but today i got my note 10.1 .
i have some questions though(i did some reasearch first )
1) how long for initial charge ? there is no indicator ,is it?
2) should i update jelly bean imediatly (through kies) i guess i will get a longer battery life , correct?
3)regarding rooting , i guess all guides are updated for rooting jellybean, right? or should i root on 4.0 and then update ?
i ve read that some methods increase binary number count wich will void my warranty ,
and some others won't.
So i would like to point me out some directions if possible . cheers !
So Mr. Trademarked Naturegod.
I don't think anyone will make that kind of decisions for you.
1. Charge it and you will see.
2. Some say so, others don't. Maybe a new ROM can max the battery life as well.
3. There is somewhere an app to decrease that back to zero.
4. You should read some more threads, write down your questions on paper and then search the forum first to find an answer.
5. Watch the registration video. I liked it.
edit: Oh, instead of writing down your questions on paper, use ure new note 10.1.
haha thank you very much , kind sir
btw i dont see any back up option on kies , correct?
any guide i follow here . on how to back up , will be updated ? or i should pay attention to some details?
I really do not know.
The first thing I have made was to install cwm via odin. Maybe an older one because the newest clockwork mod (touch) have some errors in graphic installations of some roms. So I installed a cwm that seemed to work on other notes too.
After that I installed via cwm (pay attention to bootmode) the root-zip and then a good ROM (or vice versa).
Now I can install anything I want. If I install that app to set the modification counter to zero, I can flash the original stock image back to the device and nothing ever happens. (Maybe other people tried and I forgot something.)
Via cwm you can backup. Otherwise you have to use an App like titanium backup.
Before you install any ROM or flash your device... you should install any app you want and you want to test. Play around and the best apps and things you install after a fresh rom flashing.
If you do it step by step, there isn't much you can do wrong. But still pay attention and read everything in those interesting threads. Sometimes the newest information isn't on first site.
Update to newest version, watch out for the exynos exploit (use search, but should be patched with newest samsung update) and maybe - eh, whatever. Use it like other noobs use a new tablet.
If you don't need the pen, maybe you should change to nexus 10 (?)
Normally, most member in here don't write that much. I do because I am new too. Read the Stickies in each thread. Should answer most questions.
Hi, ive tested alot of roms etc in the past but its a jungle of stuff to know... so the question is, i want a step by step guide how to do a full backup, so i can restore official (default) rom again... and after that i want to root and get full su privilegies and being able to run linux(backtrack) on my i9505... on older devices i never had problems, but with this one i dont get how to make a full backup.. please tell me step by step what programs i need, i will search for the threads and use the guides there for each step, but first i need to know what i need to complete this task..
1. backup (full)
2. root (full)
3. install backtrack
atm i run official 4.3 rom from samsung..
please close this thread after i got a answer
TY //DrBlaze
What you want is not possible. You can only make backups after you root. It is also not neccesary. Just root, flash do what you want.
If you want to revert to stock, just download the stock rom you are currently on and flash it.
Well. About that i know. But The only release i find for my country "sweden - vds" is modified by a different provider and brings more stock crap then normal... But Well. .If is not possible.. can u atleast till med The steps i asked for in correct steps and what tools u recomend ? I want linux to work.. atm i use stock
EDIT: also, i dont want to do it that way, i have a comfortable setup on my cell atm, the reason for root is Linux and
remove of bloatware... custom roms looks nice, feels nice but always got some issues with the hardware..
DrBlaze. i9505 xda-premium app.
BUMP
i bump this thread in hope that i get help since i never got to an solution or got an proper answer... i completed the question in the post before this...
ty for helping // DrBlaze
So, I have been using an S3 {yeah S3 , i know old, but duh i just love it } for over 3 years now . I started out as a complete noob, still am, and S3 was the first phone that i started working on. Over the years i have tried many custom ROM's , Kernel's and MOD's and i have tried here to create a List of Best Performing Custom Items over the course of 1 year, with special care for people like me who have just started out in the world of android, So here goes. {in 4 steps} :-
<1> Best "FAIL-SAFE" Method of Rooting/Installing a custom ROM - I know most of the people are afraid of bricking their device's, the first time they root. I have been in that situation and had my phone soft bricked many times while trying out different thing's. So the Most FAIL-SAFE Method that i have come up with is this:-
Many people suggest rooting the devices first and then installing a custom ROM. I have tried to do things a little differently so that the first timers can get comfortable.
A. First thing to do is install CyanogenMod on your specific devices. [without rooting] , The developers at cyanogen have made an application to directly install Cyanogen to your devices from your PC like a regular Software Install. The Link and the Instructions can be found on the official Website - http://get.cm. The process is very simple and easy to do and after the install your device gets automatic root access. The xda thread - http://http://forum.xda-developers.com/android/apps-games/app-cm-app-installer-t2959922 - {you get CM - 11 from this download }
B. Now that your device is has CyanogenMod, you get a rooted device and a custom ROM. But the problem with Cyanogen is that the Custom recovery which it provides has very limited options available. So the next step is to go to Google Play Store and download "TWRP Manager" or "ROM Manager" [i personally use TWRP]. This application will help you to Install the TWRP or CWM recoveries on your Phone. The process is fairly simple, After Installing the App, Choose your Device Model and Version and Let the app do the rest of the work. PS the apps require ROOT access which your phone can provide now.
C. By now if all the steps are performed correctly [very less chance of something going wrong because most of the tings are done automatically] your respective device should have a custom Recovery installed. Next and Most important step is to Create a NANDROID BACKUP [basically an ultimate backup to restore everything]. Go to recovery mode [Home+Volume up + Power button] and select backup, and make a complete backup on your SD card. It's really important to create a Backup before doing anything. This step must not be skipped in any case.
D. Now it's time to let your imagination run wild xD, Download custom ROM's, Kernel's MOD's etc and just copy the zip's to the SD card and install them using the recovery. In case anything goes wrong Just restore from the Backup you made earlier.
[PS: Update your backup's regularly]
<2> Now's the list of My Personal Favorite's which Have Improve the overall Performance of My Phone Greatly. All the ROM's, Kernel's etc have been personally tested by me for over 3 month's for Issues related to Stability, Performance and Bug's . I have tried to put forward the Best package for optimal performance.
1. Recovery [doesn't affect much] - - TWRP Recovery: Personally "Team Win Recovery Project (TWRP)" is my favorite because of it's easy to use touch control's , it's efficiency and Design. I like the cool blue texture theme of TWRP and the speed with which it create's backup and install's new things. The performance of the Phone does no depend upon the Recovery though and you may choose whichever recovery you are comfortable with.
2. ROM - BlissPOP v4.0.3 (CM 12.1 base) : Yes i have chosen this ROM out of the many other i tried. The reasons are very simple, This ROM provides outstanding stability and Performance to the device. There is no bloatware in the ROM and there are simply hundred's of features available for customization. It's compatible with generally all the Kernel's and Mods available for your device and the regular Nightlie's are an added bonus. It's the only ROM based on Lollipop(5.1.1) in which i haven't found any Bug's or stability issues.
Many people told me to try Paranoid ROM but personally i find Paranoid a little buggy, and i found that the PI controls and Halo, due to which the ROM is popular are not of any important use to people like us. They only add a touch of appearance to the device [strictly my view and i mean no offence to any other person ].
3. Kernel - Archie kernel for Galaxy S3 - http://forum.xda-developers.com/galaxy-s3/development/kernel-archikernel-v1-0-power-hands-t2785337
4. MOD's -
A. Audio Engine - Ac!d Audio - http://http://forum.xda-developers.com/galaxy-s3/development/mod-acid-audio-engine-v5-0-samsung-t2002197
Viper4Android -http://forum.xda-developers.com/showthread.php?t=2191223
6. Root Applications -
A. Titanium Backup:
You can backup, restore, freeze (with Pro) your apps + data + Market links. This includes all protected apps & system apps, plus external data on your SD card. You can do 0-click batch & scheduled backups. Backups will operate without closing any apps (with Pro). You can move any app (or app data) to/from the SD card. Available on Google Play
B. AdAway for Android [built-in app in BlissPop ROM]:
to block ads on your Android device this app is not avalibale on the playstore but you can still install it from this link
C. Greenify:
Is a good application to make your Android device more faster, by hibernating the background apps that you don't use. this application is completely free. Available on Google Play
These are the only Apps which i find useful in the long run as i have to use them constantly. Rest application's are used from time to time but not regularly. So this is My List, i'd be glad if anyone want's to add to it ^.^
I'd Like to Thanks the Amazing People who have Made the above Programs to make our Phone More performance and Appearance efficient. ------> CyanogenMod community, BlissPOP community, xda developers, Jeeko, JustArchie, amarullz, the Ac!d Audio Engine Team,zhuhang(Viper Mod), TWRP team.
Give a Thanks if u were helped by the post
================================================================================================================
Intense Testing Period -> Over 8 months [tried the new Lollipop ROMS's , over 20 kernels, Latest Android M ROM's , some personal opinions
================================================================================================================
Firstly sorry, for the delayed updates, i have been a little busy trying to develop my own ROM (surprise! surprise!, not for S3 unfortunately thought as i can never come close to the current ROM wiz's ), now in the second edition , I have tried to utilize my knowledge over 8 months to put up a new more enhanced guide and have also put up common and uncommon bugs which I experienced along the way and have provider the working solutions for them. Also I am extremely sorry for all those broken links and not working Mods, i'll try to keep my list precise, sharp and accurate this time.
1. Alternate method to Root (super easy, risk free, takes at maximum 5 minutes) - {for windows running PC, stock ROM or any other custom ROM can be used}
So, I would still recommend using my method 1 in order to initially root your device, install a custom ROM and a Recovery as i know the fear and anxiety or every new user trying to root his phone for the first time.
Now for a little more experienced users (quickie guide) [for I9300 version] who do not want to spend a lifetime to just get their devices rooted -
(a) Download the Chainfire's AutoRoot file here and place this file on your PC.
(b) Download Odin (latest version) on your PC here and unzip the file and start odin.
(c) Power down the device, then reboot in Download Mode [ press Power button + Home Button + Volume Down Key] and press volume up key at the caution screen. (little Hint: mostly the device reboots itself when you do not press the 3 buttons at the same time, to counter this press the volume up button and the home button first and hold them and then press the power button until you see the Galaxy S3 logo)
(d) Now connect your device to your PC using a sturdy USB cable. After doing this 2 outcomes are possible:-
~1. Your device is identified by Odin and a faint blue colour is shown on one of the top tabs indicating the port through which your device is connected. In this case proceed to step (e).
~2. If your device is not recognized by odin ie no blue colour, then the drivers of your device might not be installed on your PC. To tackle this download the Driver Suite from Samsung here and run the program. If done correctly when you next connect your device the drivers should get installed and odin should recognize your device.
(e) Click the "AP" button on odin and select the "Chainfire's v-xxx .mad5.tar " file which you downloaded above, odin will then take some time to check the file and when it's ready press start. CAUTION - do not change Odin's settings and assure that Reset Runtime and Auto Reboot are selected, never select re-partition on the odin interface.
(f) After the installation is complete your device should reboot automatically and you should have SuperSU installed (indiacting 99.99% times that your device rooted successfully ).
(g) If you want you can then install a custom recovery using the method indicated in my "method 1" [above].
-feel free to message me for any doubts-
Here are some of my new recommendations based on personal experiences:-
2. ROM's - I will try to divide this section based on firstly Android System and then further based on Stability, Features, Performance. Further i will be adding 2 ROM's for Android M . [i will not be naming ROMS which have a touchWiz interface]
(A) Android Lollipop and Below
Stability - Official CyanogenMOD 11.x [kitkat 4.1.1] - Zero Doubt, this one is the most stable thing out there for S3, old, yes but well you can do anything you want with this ROM and it will not seriously bug out on you when you need it. If someone does not mind going for an older version of android and needs epic stability, just go for it.
Features - BlissPop v3.0.x [CM 12.1 base][ Lollipop 5.1.1] - This ROM is filled with features, you name it, this ROM has it, PI controls, Built-in apps including AdAway, Kernel Modifier, Greenify, SuperSU etc, seamlessly integrated into the build environment. Each and every feature of this ROM is customizable, every font, colour and animation. Simply put, for someone who needs features and customizations go for this one. On the other hand, this ROM is less stable (crashes quite often ) and provides a slightly laggy gaming experience. No bloatwares in this ROM.
Performance - ArchiDroid [CM12.1 base][Lollipop 5.1.1] - Performance, Performance and more performance, all the technical aspects of your device will be enhanced and although the customization features are minimal but this ROM turns your device into a Performance Beast. All the gamers and performance lovers, what are you waiting for
Android 6.x.y Marshmallow
1. RESSURRECTION REMIX M - Fast, Durable, Amazing performance. Fell in love with this one when i used it, and this is my current ROM, no bugs so far and have been using it for over 1 month. Immensely Customizable, no lag during gaming, an amazing upgrade from Lollipop.
2. NamelessROM 3.0 - Feature Loaded, Minimal, good Looks and customization features and of course the ever caring support team of Nameless makes this a go to ROM.
>>> A bit more studying will be required before i finally divide the Android M ROMS's based on their features, performance and stability. Will be posting the results as soon as i am finished.
3. Kernels - AGNi pureCM and Boeffla-Kernel (26-03-2016) , tied, tested and proved that they are the best on very benchmark or performance test, although battery usage is better balanced on AGNi whereas Boeffla is more inclined towards performance.
You can find the Links to all the above ROM's and Kernels and many more in this thread - here
PS - Please Post your bugs in the thread and i will do my best to try and solve them out with an easy and sure solution
Cheers!
Awesome rundown for a new user like me. I've just got an S3 after using a Nexus S for 3 years. The S3 feels like such a beast compared to it!
I want to root and put a custom ROM on my device this weekend. I currently use cm11 on my Nexus S but it's a bit slow (which is understandable considering the hardware) so I can't wait to try it on the S3. My priority is long term stability ( I don't like flashing the emperors new clothes every 5 minutes). I just want to flash a ROM and forget it.
Have you tried any slimroms on the S3?
Sent from my Nexus S using XDA Free mobile app
[email protected][email protected] said:
A. First thing to do is install CyanogenMod on your specific devices. [without rooting] , The developers at cyanogen have made an application to directly install Cyanogen to your devices from your PC like a regular Software Install. The Link and the Instructions can be found on the official Website - http://get.cm. The process is very simple and easy to do and after the install your device gets automatic root access. The xda thread - http://http://forum.xda-developers.com/android/apps-games/app-cm-app-installer-t2959922 - {you get CM - 11 from this download }
Click to expand...
Click to collapse
Hi.
Can you just go over this again. Do I use my phone to download an installer from http://get.cm, install the apk then I will have root?
edit - damn I don't use WIndows, only Ubuntu. I can't use it.
Cheers.
Hi warren
Yes I have used slimrom too on the s3. Its good but as u are looking for stability I would suggest go for cyanogen because in my experience cyanogen shells out a better performance as compared to slimrom. My gaming experience was a little reduced in slimrom and I experienced a little lag but no such issue in cyanogen.
Secondly if you use ubunto I would suggest going for a virtual box to install windows and then the cyanogen application as it's the safest way to install a ROM.
U have to got to " get.cm " from both your phone and PC
On PC a windows installerbwoll be downloaded and on the phone an APK will be downloaded first install the apk the install the windows program and then continue as given in the installer setup.
Else mate, I wud say first download the stock ROM of s3 as a backup and the continue to root in the traditional way .
Any problem just ask me
Cheers
Hi.
I was thinking the same. CM11 all the way! I used Slimrom on my Nexus S but it was very very slow. I almost smashed my phone in frustration.
Nice tip about using a virtual machine to install cm. I will have a think about that. At the moment I have found a very good guide that involves using Heimdall on Ubuntu and Chainfire,so i will probably go for that method.
I am definitely going to try arter97 kernel. It looks immense. It has boeffla sound which I am looking forward to trying.
Sent from my GT-I9300 using XDA Free mobile app
A little Confused....???
[email protected][email protected] said:
Hi warren
Yes I have used slimrom too on the s3. Its good but as u are looking for stability I would suggest go for cyanogen because in my experience cyanogen shells out a better performance as compared to slimrom. My gaming experience was a little reduced in slimrom and I experienced a little lag but no such issue in cyanogen.
Secondly if you use ubunto I would suggest going for a virtual box to install windows and then the cyanogen application as it's the safest way to install a ROM.
U have to got to " get.cm " from both your phone and PC
On PC a windows installerbwoll be downloaded and on the phone an APK will be downloaded first install the apk the install the windows program and then continue as given in the installer setup.
Else mate, I wud say first download the stock ROM of s3 as a backup and the continue to root in the traditional way .
Any problem just ask me
Cheers
Click to expand...
Click to collapse
My understanding is that unless you rooted your S3 quite a while ago, pre 4.4.2, you can't add custom ROMs. The late-rooters would have a locked bootloader and would be severely limited on what mods are possible. Is my understanding incorrect? Thanks!
Oh my I hope this isn't the case.
Is this not just on Verizon or all s3's?
Sent from my Nexus S using XDA Free mobile app
Sorry to confuse things. I believe the locked bootloaders only apply to those unlucky enough to have Verizon phones.
Yay not me then! NP.
P.S. Verizon suck!
Yes mate unfortunately Verizon version of S3 has a locked boot loader and it does not allow the user to install a new recovery. I would suggest using Odin to auto root your phone which in turn also unlocks the boot loader. I can make a step by step guide for Verizon version if anyone requires it. Personally I prefer the international version though. It has more optimized system functions.
Tell me if u want a Verizon guide
$$-
Thanks for your reply. Sure, if you have something that will allow me to unlock my Verizon Galaxy S3 bootloader, that would be great! Is that what your verizon instructions will allow me to do? I've never heard of any way of doing this, so that would be great if it works! Btw, I am running 4.4.2. Thanks again!
What about /EFS backup and locked boot loader?
I have been an old time user of android starting with sony xperia X3. I had a bad luck with that phone. When sony updated android from 1.6 to 2.2 , the phone went into a boot loop and finally got dead. I sold the battery and screen separately to make some cheap buck!!
After that experience, I have been reading a lot for rooting and there seems to be lot of info on that.
My phone model is Samsung S3 GT-I9300 international version. I am still on the stock Rom with 4.3 on it.
I tried with kingroot app and it bricked the phone and was able to recover with kies.
What I want to know is that, you have mentioned option A, do I need to make any backups (not the contacts and personal stuff which I am not worried when I start playing with the phone) of EFS partition?
Will I be able to restore to old stock ROM just by using ODIN and the firmware which is available from the market?
What I need to know is , will I need any specific data (IMEI or EFS) unique from my phone?
Hi [email protected][email protected]
I used Heimdall in Ubuntu and I managed to root and put SuperSU on my phone ! I also put TWRP recovery on as well and then did a backup of my stock ROM. I am now ready for some ROM flashing!
I am unsure whether to go for CM11 or something like Tamasek's CM12.1 ROM. Have you used Tamasek's ROM before? Thinking about it for the first flash I think I will use CM11 snapshot and arter97 kernel. Then I will nandroid backup and then I have a stable ROM/kernel combo to fall back on in the future.
Looking at arter97 kernel can you tell me about f2fs support and how I get it? Does it speed up certain parts of the memory? Is it worth flashing? Also, the kernel mentions touch wake. Is this available for the S3?
Cheers.
I can't believe it I bust my sim slot! I cut my old sim card with a tool cutter and it looked good but it was a little tight going into the slot and I pulled it out and that’s when I must of bent some pins. I'm gutted :crying::crying:
Thankfully a replacement is only £3 and swapping it over looks a doddle :fingers-crossed:
Looks like I will have to wait a week until I can have a proper play. I did download BlissPop ROM and I like it. Been playing around with that all day but Its still not a phone until I get my sim in it.
You live and learn
mathew_p_a said:
I have been an old time user of android starting with sony xperia X3. I had a bad luck with that phone. When sony updated android from 1.6 to 2.2 , the phone went into a boot loop and finally got dead. I sold the battery and screen separately to make some cheap buck!!
After that experience, I have been reading a lot for rooting and there seems to be lot of info on that.
My phone model is Samsung S3 GT-I9300 international version. I am still on the stock Rom with 4.3 on it.
I tried with kingroot app and it bricked the phone and was able to recover with kies.
What I want to know is that, you have mentioned option A, do I need to make any backups (not the contacts and personal stuff which I am not worried when I start playing with the phone) of EFS partition?
Will I be able to restore to old stock ROM just by using ODIN and the firmware which is available from the market?
What I need to know is , will I need any specific data (IMEI or EFS) unique from my phone?
Click to expand...
Click to collapse
Hi Mate,
First of all, don't worry at all about the bricking thing, with the option A that i have mentioned, it's 99.99% success, i haven't found a single person yet for whom the method didn't work.
Secondly i would suggest u take the backup of your phone contacts in a vCard format using Kies first so that u don't loose them. And copy all your Personal things on your PC (pics, videos etc).
Thirdly you do not need to make a separate disk partition for the method to work, the CM installed will do it for you. Also if u have an International i9300 version u need not do a single thing yourself. Just start the setup and sit back and relax. Just follow my method to the letter and you can have a great custom ROM with root access in no time.
MOST Importantly - You can go to stock firmware of samsung but this time you will have to use odin instead of Kies to do that. You won't be able to use Kies once you have installed a custom ROM, but trust me that's a small price to pay for a very efficient ROM.
You do not need to know the IMEI or EFS number though i would suggest u still make a note of it somewhere in case ur phone is lost. Prevention is always better Message me if u have any queries. Cheers!
Warren_Orange said:
Hi [email protected][email protected]
I used Heimdall in Ubuntu and I managed to root and put SuperSU on my phone ! I also put TWRP recovery on as well and then did a backup of my stock ROM. I am now ready for some ROM flashing!
I am unsure whether to go for CM11 or something like Tamasek's CM12.1 ROM. Have you used Tamasek's ROM before? Thinking about it for the first flash I think I will use CM11 snapshot and arter97 kernel. Then I will nandroid backup and then I have a stable ROM/kernel combo to fall back on in the future.
Looking at arter97 kernel can you tell me about f2fs support and how I get it? Does it speed up certain parts of the memory? Is it worth flashing? Also, the kernel mentions touch wake. Is this available for the S3?
Cheers.
Click to expand...
Click to collapse
Hello Warren,
Good to hear that you are having fun with your new phone.
Firstly yes i have used Tamasek's/JustArchie's CM12.1 ROM and it's quite good to be honest. So first i'll talk about it then i'll come to the kernel.
So 12.1 yes, the most noticeable change android L 5.1, all good, nice appearance, but i would say just think again for a bit.
A comparison between the two is a mammoth task but i'll try to brief it for you and tell you why i like the CM11 better even though it has android KK. It's upto to you though what you choose to flash. i even have a nice tip for you in the end
So first let's see the CM12.1 -
Quite stable, i used it for like a month or so for testing and got a good result. The performance was at par with the rest of the ROM available for S3. The Graphics, Audio and Processing quality is also good and is suitable for light use. Here's the catch though, Firstly the Gaaps, many gaaps available Android L are not compatible with the unofficial 12.1 so u'll have to look around to find the correct set of Gaaps.
Secondly i personally find that the CM 11 has a much neat finish as compared to CM 12.1, i don't really care about the android version as for me if i can have all the features of android L in a more stable KitKat ROM i don't usually upgrade my ROM. THe reasons are very simple
Firstly it's Unofficial, No Nightlies, rare updates. Also the unofficial ROM is alive only till the Developer is still working on it. Once he stops his work it's a very slim chance that you can get your bugs fixed.
As for the Official one, there are thousands of forums on Solutions to various Bugs and Numerous customization options. We can't really know whether the unofficial 12.1 supports all the things available for the official ROM.
Based on Performance both the ROMS perform equally, there's a camera Bug in the 12.1 which can be a problem sometimes but rest is all good.
On a personal side [not really of importance] i like the Calculator of the CM 11 better than CM 12.1.
Now the Kernel - arter97 is simply amazing, The most noticeable changes are - 1800 GHz overclocking [yeah from 1400 to 1800 BOOM!],
the Knock feature - Tap the screen to unlock the phone, no need to use any buttons, Battery Tweaks etc.
Also it used a custom engine to allocate the Files to various partitions to the memory so yeah it saves space plus we can even Increase our RAM a bit by using the Internal Memory of the Phone.
I am a Hardcore Gamer and use my phone to the limit sometimes [ Playing Asphalt 8, Real Racing, GTA: San-Andreas, FIFA 15 and WWE Immortals can take it's toll on the phone.] these games require very high end phones but with this kernel they all run liquid smooth on my phone without even a slightest bit of lag. So yeah i would surely recommend arter97's Kernel. PLUS u get Boeffla Audio Engine which is an added BOnuS
Touch WIZ -- Not Necessary, I flashed it using TWRP and it worked Just fine.
f2f - f2f has better memory allotments and it's pre configured, we usually don't have to enable it, it's much better than extD though.
TIP - arter97 supports dual Booting so you can even enjoy cm12.1 and cm 11 at the same tine [Dual Booting i'll cover in the next post if you have a problem doing it ]
-----> Also U can use the Siyah Kernal, which work's just fine and even has an amazing Boot Image but now as much features as arter's.
straykat said:
$$-
Thanks for your reply. Sure, if you have something that will allow me to unlock my Verizon Galaxy S3 bootloader, that would be great! Is that what your verizon instructions will allow me to do? I've never heard of any way of doing this, so that would be great if it works! Btw, I am running 4.4.2. Thanks again!
Click to expand...
Click to collapse
Hello,
well i have two methods for Verizon Phones, One i have tried myself the other one was tested by one of my friends,
For the First one -
Using Odin Use the Chainfire's Auto Root Application to give root access to your phone. https://autoroot.chainfire.eu/ This application in turn also unlocks the bootloader and hence you can easily install further ROM's. Check the Xda general Samsung forum to learn how to use Odin if u don't know , or just message me
Second - This Method requires Root Access on you r Phone. THere's an app on Google Play named "EZ Unlock" to unlock the bootloader , I think this app can help you out but i haven't tried it myself so i can't really comment. But looking at the reviews i would say that this app really works. ----> http://www.mediafire.com/download/qozzz1p43kxzs3z/EZ-Unlock14.apk
Here's a custom Recovery that can help too - http://forum.xda-developers.com/showthread.php?t=2797314
Cheers!
Hi..I did a search but i am completely confused and bewildered by the vast amount of different posts and opinions in threads..so i apologise if this has broken any rules.
Basically i have a stock s3 i9300 (uk) with original samsung jellybean 4.3 rom,I am getting a bit sick of it now (and the bloat) and i am looking to move on to something more appealing..I have already rooted and installed Rom Manager and CWM..i was wondering what the "Best Simplistic dark themed (small footprint) rom" to go for As i want minimal installed size to make the most of my 16gb memory,i dont mind which android version as long as the process is easy and the battery life is among the best available..And of course it is as stable as my current Samsung android rom..
i would really appreciate any valued veteran guidance..many thanks.
[email protected][email protected] said:
Hello,
well i have two methods for Verizon Phones, One i have tried myself the other one was tested by one of my friends,
For the First one -
Using Odin Use the Chainfire's Auto Root Application to give root access to your phone. https://autoroot.chainfire.eu/ This application in turn also unlocks the bootloader and hence you can easily install further ROM's. Check the Xda general Samsung forum to learn how to use Odin if u don't know , or just message me
Second - This Method requires Root Access on you r Phone. THere's an app on Google Play named "EZ Unlock" to unlock the bootloader , I think this app can help you out but i haven't tried it myself so i can't really comment. But looking at the reviews i would say that this app really works. ----> http://www.mediafire.com/download/qozzz1p43kxzs3z/EZ-Unlock14.apk
Here's a custom Recovery that can help too - http://forum.xda-developers.com/showthread.php?t=2797314
Cheers!
Click to expand...
Click to collapse
[email protected]
Thanks for the info! I looked on a Chainfire thread here on xda to see if others have done what I would be attempting to do with my Verizon S3, but I don't see anyone else saying they've used this method to unlock their bootloader & install roms. By chance, do you know any place on this forum or any others that talk about peoples' successes using this method on a Verizon S3? I'm a little nervous about attempting this method without knowing that lots of other people have done so successfully.... Thanks for your help & your understanding of my feelings on this.
Broken Link
Your "Mods" links are broken.
In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
ROMs:
HOW-TO Root and Install Stock ROM: https://docs.google.com/presentation/d/1NJcDBkLk8zMwyv2BTqRjn2NB_ZOWKjP1fRpSVr44Oxk
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 7.0) - 4+64 Variant
- 20171028: https://mega.nz/#!4Lo2TJyJ!-m8rhxTJ3VCFjQnLfauIC2dGMfnPwGtcs7o32J4Et-k
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Firmware Upgrade" instead.
Previous Releases:
- 20171022: https://mega.nz/#!t6onDL5D!JI3mdIyqG2A_pXtZ-vKzCAwj-QFBAFPCRIiM6TbbDZY
- 20170830: https://mega.nz/#!kLYjVTpY!l8_hoKlS7d0_RLV71xUBwL1w0lR11PN4IVPC1u26EEM
- 20170615: https://mega.nz/#!ZeQTARAQ!Z8q1hUWtMn6SXFtL-PfTFbwvQz6G9i46WosEXlU2ay0
Stock (Android 7.0) - 6+64 Variant
- 20171028: https://mega.nz/#!0bxyDQbb!FOnbe5cYZr7Q7DWQKgSx4IQ7Keiy7fD5aZ55ZOe9zDc
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Firmware Upgrade" instead.
Previous Releases:
- 20171022: https://mega.nz/#!FOQHRIhB!nTA2F2SVAs4ncESTAJRyvHBIMBw5QU8Ot1Vl7lQL418
- 20170810: https://mega.nz/#!IP5xwabB!D2i1ac-utl6A8A-q77cvwE0iQmJBrjz1-c6imAZ5Xhg
- 20170621: https://mega.nz/#!AfIz3SLb!41TxksnjlcgN51t1MggQdoVRlVPiajcebaO6BEEpeug
Flash Tool
- SP Flash Tool for Windows and Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A
Recovery:
- TWRP 3.1.1 by @jemmini (20170810 based): https://mega.nz/#F!FVsH2JLR!bKDbF3Wz3Jsyk8_A4R_m4g
Root:
Rooting Methods (if you are on Stock ROM)
- Pre-rooted boot.img for 4/64 variant: https://forum.xda-developers.com/showpost.php?p=74358280&postcount=335
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu
Extras (Root-Only):
Customization
- Xposed Framework: http://forum.xda-developers.com/showthread.php?t=3034811
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
How u do it man... So many development for so many devices... Share some knowledge dude.
sagargjasani264 said:
How u do it man... So many development for so many devices... Share some knowledge dude.
Click to expand...
Click to collapse
For Mediatek Devices it is pretty easy because if you manage to build a ROM for a device that has its software made by the same company who did the same software for another device (i hope this sentence is clear), then you can build a ROM for both devices with just some minor changes.
Alberto96 said:
For Mediatek Devices it is pretty easy because if you manage to build a ROM for a device that has its software made by the same company who did the same software for another device (i hope this sentence is clear), then you can build a ROM for both devices with just some minor changes.
Click to expand...
Click to collapse
Yep.. Got that line clearly... But what to do when u don't have source codes for your perticuler device or similar device with same company and software ? U can't build.... Am i right?
If its possible pls pm me.. I dont wanna add more off topic comments in ur thread..
sagargjasani264 said:
Yep.. Got that line clearly... But what to do when u don't have source codes for your perticuler device or similar device with same company and software ? U can't build.... Am i right?
If its possible pls pm me.. I dont wanna add more off topic comments in ur thread..
Click to expand...
Click to collapse
I'll just reply here for the last time, it is OT, but still useful for development
When there is no kernel source code, i use the prebuilt kernel image (included with the Stock ROM), while everything else gets compiled (excluding proprietary files required to handle the hardware).
Alberto96 said:
I'll just reply here for the last time, it is OT, but still useful for development
When there is no kernel source code, i use the prebuilt kernel image (included with the Stock ROM), while everything else gets compiled (excluding proprietary files required to handle the hardware).
Click to expand...
Click to collapse
I don't know i got last part correctly or not but i will google now for that.. Anyways thanks for information man.. Keep it up ur work.. And keep sharing knowledge..
... the rom - download (mega) is it working with the 4gb version too? great job so far...
i have tried that rom, it does not work for 4gb version, doogee logo stuck on the screen
---------- Post added at 12:01 PM ---------- Previous post was at 11:58 AM ----------
i bought phone from banggood came with offical outdated software, so i will never get update.the only rom with update is 20170621. the rom that we have here 6gb version,hope someone will provide rom 20170621 for 4gb version.
many thanks
I'm also wondering about ROMs for the 4gb version of the phone? Have they updated that to the same level as the 6gb ROM? I thought the specs were identical apart from the extra 2gb of memory??
Can you do a rom for 4gb Version?
pheemc said:
Can you do a rom for 4gb Version?
Click to expand...
Click to collapse
"Can you do" doesn't exist yet.
It is only the Stock ROM provided by DOOGEE directly, not something I made. You have to ask DOOGEE if you want other variants, then provide me the link.
Ah okay, i thought this was the pure stock Android Rom without Doogee "bloat".... Do you think there will be a lineage Version in future?
pheemc said:
Ah okay, i thought this was the pure stock Android Rom without Doogee "bloat".... Do you think there will be a lineage Version in future?
Click to expand...
Click to collapse
It's too early to discuss about source-built ROMs, this is a pretty new platform.
hi guys,i cannot find any source that i can obtain doogee mix 4gb varient rom(build 20170621),i already asked admin doogee mix forum ,but no response.any idea where we can get that rom? thanks
the rom does not work . the flash tool say the scatter is invalid
libuda04 said:
the rom does not work . the flash tool say the scatter is invalid
Click to expand...
Click to collapse
It does, I have flashed it on my own MIX.
How did you flash it with SP Flash Tools?
When i connect and try it says BROM ERROR: STATUS_BROM_CMD_SEND_DA_FAIL(0xC0060003)
What does it mean.
I installed drivers for MT67xx and latest SP Flash Tool
I have my phone turned off and when i connect (after clicking download in SP Flash Tool) it says the error.
Hi guys, i'm pretty novice about all of this and i dont speak english a lot, i have a problem with my new DOOGEE MIX (6gb i think), i tried to uninstall the "DOOGEE OS" many times but i failed all time. There is a cat/gameboy on my screen and i cant remove them, maybe i can find an issue here. Thank a lot in advance and have a good day !
hi, do following:
home screen, press on the screen a few seconds,you will see launcher settings, then turn off search bar and know on home screen
hans2001 said:
hi, do following:
home screen, press on the screen a few seconds,you will see launcher settings, then turn off search bar and know on home screen
Click to expand...
Click to collapse
Oh yeah it worked ! I have almost intalled something for "root" my phone. Thank a lot dude !:laugh:
Do you know how to remove the last background on the left too ? The one with all the newspapers ? I'am actually searching on the new launcher settings but i cant find it, thank .